Search NASA⌕ Search

SEARCH · Search NASA

Results for “formative process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Nozzle tip wetting in gasoline direct injection injector and its link with nozzle internal flow

Fuel film in the gasoline direct injection injector tip, or so-called nozzle tip wetting, has been found to be an important contributor of particle emissions. Attempts have been made to reduce the nozzle tip wetting by optimizing nozzle geometry designs. However, the inherent mechanism of the nozzle tip wetting formation and its link with nozzle internal flow is still unclear yet due to the lack of direct observations. To overcome this insufficiency, here the nozzle internal flow and the formation process of the nozzle tip wetting were visualized in the real-scale aluminum nozzles using the X-ray phase-contrast technique. Results showed that the needle bouncing, injection pressure, and hole configuration affect the formation of the nozzle tip wetting, while the influence of needle bouncing is the most critical. A further study was conducted to examine the effect of nozzle counterbore diameter on the nozzle tip wetting. It was found that with an increase in counterbore diameter, the nozzle tip wetting slightly increased first and then decreased sharply after the counterbore diameter exceeded 0.40 mm. The mechanisms of the aforementioned phenomena were discussed in detail, which can contribute to the better understandings and control strategies of nozzle tip wetting.

42 ENGINEERING↗

Thermal Analysis of Mixed Matrix Membranes Involved in Gas Separation

Idaho National Laboratory is developing a mixed matrix membrane that can separate oxygen from air. The enriched oxygen stream is intended to be used in gasification systems and coal combustion. This study evaluated the thermal properties of polymer membranes that were cast from different solvents and contained various concentrations of nanodiamonds, where the polymer-nanodiamond composites acted as the selective layer. Measuring these properties helped to understand the membrane formation process to yield membranes that give reproducible performance. Thermomechanical Analysis determined that nanodiamonds cause a physical effect on the membrane when exposed to heating. Thermogravimetric Analysis and Differential Scanning Calorimetry determined residual solvent in the membrane after formation. Residual solvent tended to decrease the performance of membranes. From this work, we developed a method of forming solvent-free polysulfone membrane composites containing nanodiamond particles that gave reproducible permeability and selectivity data.

25 ENERGY STORAGE↗

On the origin of ‘fuzz’ formation in plasma-facing materials

Tungsten, the material used in the plasma-facing components (PFCs) of nuclear fusion reactors, develops a fuzz-like surface morphology under typical reactor operating conditions. This fragile 'fuzz' surface nanostructure adversely affects reactor performance and operation. Developing predictive models, capable of simulating the spatiotemporal scales relevant to the fuzz formation process is essential for understanding the growth of such extremely complex surface features and improving PFC and reactor performance. Here, we report the development of an atomistically-informed, continuous-domain model for the onset of fuzz formation in helium plasma-irradiated tungsten and validate the model by comparing its predictions with measurements from carefully designed experiments. Our study demonstrates that fuzz forms in response to stress induced in the near-surface region of PFCs as a result of plasma exposure and helium gas implantation. In conclusion, our model sets the stage for detailed descriptions of this complex fuzz formation phenomenon and similar phenomena observed in other materials.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Observations and Modeling of the Green Ocean Amazon 2014/15. CHUVA Field Campaign Report

The physical processes inside clouds are one of the most unknown components of weather and climate systems. A description of cloud processes through the use of standard meteorological parameters in numerical models has to be strongly improved to accurately describe the characteristics of hydrometeors, latent heating profiles, radiative balance, air entrainment, and cloud updrafts and downdrafts. Numerical models have been improved to run at higher spatial resolutions where it is necessary to explicitly describe these cloud processes. For instance, to analyze the effects of global warming in a given region it is necessary to perform simulations taking into account all of the cloud processes described above. Another important application that requires this knowledge is satellite precipitation estimation. The analysis will be performed focusing on the microphysical evolution and cloud life cycle, different precipitation estimation algorithms, the development of thunderstorms and lightning formation, processes in the boundary layer, and cloud microphysical modeling. This project intends to extend the knowledge of these cloud processes to reduce the uncertainties in precipitation estimation, mainly from warm clouds, and, consequently, improve knowledge of the water and energy budget and cloud microphysics.

54 ENVIRONMENTAL SCIENCES↗

The Strength and Characteristics of VPPA Welded 2219-T87 Aluminum Alloy

A study of the variable polarity plasma arc (VPPA) welding process and those factors that control the structure and properties of VPPA welded aluminum alloy 2219-T87 was conducted. The importance of joint preparation, alignment of parts and welding process variables are already established. Internal weld defects have been eliminated. However, a variation of properties was found to be due to the size variation of interdendritic particles in the fusion zone. These particles contribute to the void formation process, which controls the ultimate tensile strength of the welded alloy. A variation of 150 microns in particle size correlated with a 10 ksi variation of ultimate tensile strength. It was found that all fracture surfaces were of the dimple rupture type, with fracture initiating within the fusion zone.

Jemian, W. A.↗

The formation of topological defects in phase transitions

It was argued, and fought through numerical work that the results of non-dynamical Monte Carlo computer simulations cannot be applied to describe the formation of topological defects when the correlation length at the Ginzburg temperature is significantly smaller than the horizon size. To test the current hypothesis that infinite strings at formation are essentially described by Brownian walks of size the correlation length at the Ginzburg temperature, fields at the Ginzburg temperature were equilibrated. Infinite structure do not exist in equilibrium for reasonable definitions of the Ginzburg temperature, and horizons must be included in a proper treatment. A phase transition, from small-scale to large-scale string or domain wall structure, is found to occur very close to the Ginzburg temperature, in agreement with recent work. The formation process of domain walls and global strings were investigated through the breaking of initially ordered states. To mimic conditions in the early Universe, cooling times are chosen so that horizons exist in the sample volume when topological structure formation occurs. The classical fields are evolved in real-time by the numerical solution of Langevin equations of motion on a three dimensional spatial lattice. The results indicate that it is possible for most of the string energy to be in small loops, rather than in long strings, at formation.

Hodges, Hardy M.↗

Hole formation effect on surface morphological response of plasma-facing tungsten

We report simulation results on the effect of helium (He) bubble bursting-mediated surface hole formation on the surface morphological response of tungsten plasma-facing components (PFCs) in nuclear fusion devices. Our analysis is based on an atomistically informed, continuum-scale model, which is capable of accessing the spatiotemporal scales relevant to the fuzz nanostructure formation process on the surface of PFC tungsten. Our simulations account, in an empirical fashion, for two types of subsurface bubble dynamical phenomena in the nanobubble region of PFC tungsten during He plasma irradiation, involving bubble bursting and surface crater formation. We demonstrate that the hole formation effect on the PFC tungsten surface accelerates the growth rate of nanotendrils and the onset of fuzz formation. As a result, the predicted incubation time for surface nanotendril growth is shortened, in agreement with experimental data of incubation fluence at comparable plasma exposure conditions. We also explore systematically the dependence of the PFC surface morphological response on the areal density of holes introduced at regular time intervals onto the He-implanted tungsten surface, a parameter in our analysis that serves as a proxy for the rate of He bubble bursting. More importantly, our simulations capture fine surface features in the PFC tungsten surface morphology and predict that the average spacing between nanotendrils is on the order of 100 nm, consistent with the experimental findings.

Chen, Chao-Shou (ORCID:0000000307910042)↗

Process Modeling for Additive Manufacturing

Additive Manufacturing (AM) provides a new avenue to design innovative materials and components that cannot be created using traditional machining operations. With current AM capabilities, complex designs (such as those required in weapon systems) can be readily manufactured with laser powder forming (or Laser-Engineered Net Shaping (LENSTM)) [1] that would be otherwise cost prohibitive or impossible to produce. However, before an AM product can be qualified for weapon applications, the characteristics of the metals produced by additive manufacturing processes need to be well understood. This work focuses on the development of computational simulation tools to model the metal additive manufacturing process. This work extends and integrates existing Sandia National Laboratories tools to accomplish the following: (i) be able to better predict residual stresses in AM product, (ii) extend high-fidelity material models to capture material evolution during the formation process, leading to prediction of end-state material properties, and (iii) provide a basis for engineering tools to propose improvements to additive manufacturing process variables, including those that minimize process variation. While this work in its current state is directly applicable to additive manufacturing processes, the tools developed may also help enable modeling welding processes such as gas tungsten arc (GTA), electron beam, and laser welding.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

A constraint on the formation timescale of the young open cluster NGC 2264: lithium abundance of pre-main sequence stars

The timescale of cluster formation is an essential parameter in order to understand the formation process of star clusters. Pre-main sequence (PMS) stars in nearby young open clusters reveal a large spread in brightness. If the spread were considered to be a result of a real spread in age, the corresponding cluster formation timescale would be about 5–20 Myr. Hence it could be interpreted that star formation in an open cluster is prolonged for up to a few tens of Myr. However, difficulties in reddening correction, observational errors, and systematic uncertainties introduced by imperfect evolutionary models for PMS stars can result in an artificial age spread. Alternatively, we can utilize Li abundance as a relative age indicator of PMS star to determine the cluster formation timescale. The optical spectra of 134 PMS stars in NGC 2264 have been obtained with MMT/Hectochelle. The equivalent widths have been measured for 86 PMS stars with a detectable Li line (3500<T{sub eff}[K]⩽6500). Li abundance under the condition of local thermodynamic equilibrium (LTE) was derived using the conventional curve of growth method. After correction for non-LTE effects, we find that the initial Li abundance of NGC 2264 is A(Li)=3.2±0.2. From the distribution of the Li abundances, the underlying age spread of the visible PMS stars is estimated to be about 3–4 Myr and this, together with the presence of embedded populations in NGC 2264, suggests that the cluster formed on a timescale shorter than 5 Myr.

79 ASTRONOMY AND ASTROPHYSICS↗

Paleomagnetism of the moon and meteorites

Paleomagnetic investigations (1979-1982) of the nature of the magnetization process and the magnetizing fields which produced magnetization in lunar and meteoritic materials are surveyed. Natural remanence magnetization (NRM), as well as thermoremanence magnetization (TRM), have been measured in carbonaceous chondrites and and L-chondrites to characterize the formation processes occurring when the magnetization was induced. Chemical remanence magnetism, together with the NRM, has been examined in noncarbonaceous chondrites, and NRM intensity and locations have been probed in achondrites. The magnetism has been concluded to arise either from solar magnetic fields, solar nebula magnetic fields, dynamo magnetic fields in the meteorite parent bodies, or locally generated fields caused by processes such as impacts. Lunar samples with NRM have been dated to origins less than 3.6 b.y., and could have been caused by shocks, such as from impacts less than 3 m.y. ago. Discussions of TRM, dynamo, and possible transient magnetic fields from hypervelocity meteoroid impacts as origins of magnetism on the surface and in a lunar magnetic core are presented.

Hood, L. L.↗

Toward High Efficiency Water Processed Organic Photovoltaics: Controlling the Nanoparticle Morphology with Surface Energies

Here efficient organic photovoltaic devices fabricated from water-based colloidal dispersions with donor:acceptor composite nanoparticles achieving up to 9.98% power conversion efficiency (PCE) are reported. This high efficiency for water processed organic solar cells is attributed to morphology control by surface energy matching between the donor and the acceptor materials. Indeed, due to a low interfacial energy between donor and the acceptor, no large phase separation occurs during the nanoparticle formation process as well as upon thermal annealing. Indeed, synchrotron-based scanning transmission X-ray microscopy reveals that the internal morphology of composite nanoparticles is intermixed as well as the active layer morphology after thermal treatment. The PCE of this system reaches 85% that of devices prepared from chlorinated solvent. The gap between water-based inks and organic solvent-based inks gets narrower, which is promising for the development of eco-friendly processing and fabrication of organic photovoltaics.

14 SOLAR ENERGY↗

Shock Formation and Vorticity Creation for 3d Euler

Abstract We analyze the shock formation process for the 3D nonisentropic Euler equations with the ideal gas law, in which sound waves interact with entropy waves to produce vorticity. Building on our theory for isentropic flows in [3, 4], we give a constructive proof of shock formation from smooth initial data. Specifically, we prove that there exist smooth solutions to the nonisentropic Euler equations which form a generic stable shock with explicitly computable blowup time, location, and direction. This is achieved by establishing the asymptotic stability of a generic shock profile in modulated self‐similar variables, controlling the interaction of wave families via: (i) pointwise bounds along Lagrangian trajectories, (ii) geometric vorticity structure, and (iii) high‐order energy estimates in Sobolev spaces. © 2022 Wiley Periodicals LLC.

Mathematics↗

Biomimetic synthesis of aragonite superstructures using hexamethylenetetramine

In this paper, biomimetic synthesis of aragonite superstructures using a low molecular weight organic-hexamethylenetetramine (HMT) as an additive in the presence of CO{sub 2} supplied by an ammonium carbonate ((NH{sub 4}){sub 2}CO{sub 3}) diffusion method at room temperature was studied. The products were characterized by scanning or transmission electron microscopy, Fourier transform infrared (FT-IR) spectroscopy, X-ray powder diffractometry, and selected area electron diffraction. The results showed the aragonite superstructures especially dumbbell-flower-like ones were obtained. The formation process of calcium carbonate (CaCO{sub 3}) in HMT aqueous solution was investigated, suggesting that the products transformed from calcite to vaterite primarily, and then changed into a mixture of aragonite and calcite with an increase of reaction time. The formation mechanism of CaCO{sub 3} in HMT solution was also discussed, revealing that aragonite might be controlled by HMT molecules and NH{sub 4}{sup +} ions together. - Graphical abstract: The well-defined aragonite hierarchical superstructures are formed using hexamethylenetetramine in aqueous solution. Highlights: > Aragonite superstructures are formed with hexamethylenetetramine at about 25 deg. C. > Dumbbell-flower-like aragonite produces when hexamethylenetetramine/Ca{sup 2+}=10:1. > CaCO{sub 3} formation in hexamethylenetetramine solution violates the Ostwald ripening. > Hexamethylenetetramine and NH{sub 4}{sup +} might control the growth of aragonite together.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Broad-Bandwidth FPGA-Based Digital Polyphase Spectrometer

With present concern for ecological sustainability ever increasing, it is desirable to model the composition of Earth s upper atmosphere accurately with regards to certain helpful and harmful chemicals, such as greenhouse gases and ozone. The microwave limb sounder (MLS) is an instrument designed to map the global day-to-day concentrations of key atmospheric constituents continuously. One important component in MLS is the spectrometer, which processes the raw data provided by the receivers into frequency-domain information that cannot only be transmitted more efficiently, but also processed directly once received. The present-generation spectrometer is fully analog. The goal is to include a fully digital spectrometer in the next-generation sensor. In a digital spectrometer, incoming analog data must be converted into a digital format, processed through a Fourier transform, and finally accumulated to reduce the impact of input noise. While the final design will be placed on an application specific integrated circuit (ASIC), the building of these chips is prohibitively expensive. To that end, this design was constructed on a field-programmable gate array (FPGA). A family of state-of-the-art digital Fourier transform spectrometers has been developed, with a combination of high bandwidth and fine resolution. Analog signals consisting of radiation emitted by constituents in planetary atmospheres or galactic sources are downconverted and subsequently digitized by a pair of interleaved analog-to-digital converters (ADCs). This 6-Gsps (gigasample per second) digital representation of the analog signal is then processed through an FPGA-based streaming fast Fourier transform (FFT). Digital spectrometers have many advantages over previously used analog spectrometers, especially in terms of accuracy and resolution, both of which are particularly important for the type of scientific questions to be addressed with next-generation radiometers.

Jamot, Robert F.↗

Supramolecular Modulation of Structural Polymorphism in Pathogenic α‐Synuclein Fibrils Using Copper(II) Coordination

Abstract Structural variation of α‐synuclein (αSyn) fibrils has been linked to the diverse etiologies of synucleinopathies. However, little is known about what specific mechanism provides αSyn fibrils with pathologic features. Herein, we demonstrate Cu(II)‐based supramolecular approach for unraveling the formation process of pathogenic αSyn fibrils and its application in a neurotoxic mechanism study. The conformation of αSyn monomer was strained by macrochelation with Cu(II), thereby disrupting the fibril elongation while promoting its nucleation. This non‐canonical process formed shortened, β‐sheet enriched αSyn fibrils (<0.2 μm) that were rapidly transmitted and accumulated to neuronal cells, causing neuronal cell death, in sharp contrast to typical αSyn fibrils (ca. 1 μm). Our approach provided the supramolecular basis for the formation of pathogenic fibrils through physiological factors, such as brain Cu(II).

Choi, Tae Su↗

Investigation of the Influence of Heat Balance Shifts on the Freeze Microstructure and Composition in Aluminum Smelting Bath System: Cryolite-CaF{sub 2}-AlF{sub 3}-Al{sub 2}O{sub 3}

In an aluminum electrolysis cell, the side ledge forms on side walls to protect it from the corrosive cryolitic bath. In this study, a series of laboratory analogue experiments have been carried out to investigate the microstructure and composition of side ledge (freeze linings) at different heat balance steady states. Three distinct layers are found in the freeze linings formed in the designed Cryolite-CaF{sub 2}-AlF{sub 3}-Al{sub 2}O{sub 3} electrolyte system: a closed (columnar) crystalline layer, an open crystalline layer, and a sealing layer. This layered structure changes when the heat balance is shifted between different steady states, by melting or freezing the open crystalline layer. Phase chemistry of the freeze lining is studied in this paper to understand the side ledge formation process upon heat balance shifts. Electron probe X-ray microanalysis (EPMA) is used to characterize the microstructure and compositions of distinct phases existing in the freeze linings, which are identified as cryolite, chiolite, Ca-cryolite, and alumina. A freeze formation mechanism is further developed based on these microstructural/compositional investigations and also thermodynamic calculations through the software—FactSage. It is found that entrapped liquid channels exist in the open crystalline layer, assisting with the mass transfer between solidified crystals and bulk molten bath.

36 MATERIALS SCIENCE↗

JOVIAN EARLY BOMBARDMENT: PLANETESIMAL EROSION IN THE INNER ASTEROID BELT

The asteroid belt is an open window on the history of the solar system, as it preserves records of both its formation process and its secular evolution. The progenitors of the present-day asteroids formed in the Solar Nebula almost contemporary to the giant planets. The actual process producing the first generation of asteroids is uncertain, strongly depending on the physical characteristics of the Solar Nebula, and the different scenarios produce very diverse initial size-frequency distributions (SFDs). In this work, we investigate the implications of the formation of Jupiter, plausibly the first giant planet to form, on the evolution of the primordial asteroid belt. The formation of Jupiter triggered a short but intense period of primordial bombardment, previously unaccounted for, which caused an early phase of enhanced collisional evolution in the asteroid belt. Our results indicate that this Jovian Early Bombardment caused the erosion or the disruption of bodies smaller than a threshold size, which strongly depends on the SFD of the primordial planetesimals. If the asteroid belt was dominated by planetesimals less than 100 km in diameter, the primordial bombardment would have caused the erosion of bodies smaller than 200 km in diameter. If the asteroid belt was instead dominated by larger planetesimals, the bombardment would have resulted in the destruction of bodies as big as 500 km.

79 ASTRONOMY AND ASTROPHYSICS↗