Results for “high dimensional data” — Page 24

NASA NTRS1977

The transonic multi-foil Augmentor-Wing

The paper describes the development of a transonic blown multi-foil Augmentor-Wing airfoil section that has a thickness/chord (t/c) value of 0.18. In comparison with an unblown single-foil supercritical section of the same overall t/c the new multi-foil section is characterized by an increased drag rise Mach number, increased buffet boundaries, and a reduction in 'effective' drag due to blowing. Potential advantages of the Augmentor-Wing are considered and the testing of three high-speed models in a trisonic pressurized wind tunnel (possessing a two-dimensional transonic insert) is discussed. The data indicate that a very thick wing is feasible since separations toward the rear of the main foil can be controlled both by shroud location and augmentor blowing.

Farbridge, J. E.↗

NASA NTRS1988

Two dimensional convolute integers for machine vision and image recognition

Machine vision and image recognition require sophisticated image processing prior to the application of Artificial Intelligence. Two Dimensional Convolute Integer Technology is an innovative mathematical approach for addressing machine vision and image recognition. This new technology generates a family of digital operators for addressing optical images and related two dimensional data sets. The operators are regression generated, integer valued, zero phase shifting, convoluting, frequency sensitive, two dimensional low pass, high pass and band pass filters that are mathematically equivalent to surface fitted partial derivatives. These operators are applied non-recursively either as classical convolutions (replacement point values), interstitial point generators (bandwidth broadening or resolution enhancement), or as missing value calculators (compensation for dead array element values). These operators show frequency sensitive feature selection scale invariant properties. Such tasks as boundary/edge enhancement and noise or small size pixel disturbance removal can readily be accomplished. For feature selection tight band pass operators are essential. Results from test cases are given.

Edwards, Thomas R.↗

NASA NTRS1988

The Cooperative VAS Program with the Marshall Space Flight Center

Work was divided between the analysis/forecast model development and evaluation of the impact of satellite data in mesoscale numerical weather prediction (NWP), development of the Multispectral Atmospheric Mapping Sensor (MAMS), and other related research. The Cooperative Institute for Meteorological Satellite Studies (CIMSS) Synoptic Scale Model (SSM) has progressed from a relatively basic analysis/forecast system to a package which includes such features as nonlinear vertical mode initialization, comprehensive Planetary Boundary Layer (PBL) physics, and the core of a fully four-dimensional data assimilation package. The MAMS effort has produced a calibrated visible and infrared sensor that produces imager at high spatial resolution. The MAMS was developed in order to study small scale atmospheric moisture variability, to monitor and classify clouds, and to investigate the role of surface characteristics in the production of clouds, precipitation, and severe storms.

Diak, George R.↗

NASA NTRS1989

A CCIR aeronautical mobile satellite report

Propagation effects in the aeronautical mobile-satellite service differ from those in the fixed-satellite service and other mobile-satellite services because: small antennas are used on aircraft, and the aircraft body may affect the performance of the antenna; high aircraft speeds cause large Doppler spreads; aircraft terminals must accommodate a large dynamic range in transmission and reception; and due to their high speeds, banking maneuvers, and three-dimensional operation, aircraft routinely require exceptionally high integrity of communications, making even short-term propagation effects very important. Data and models specifically required to characterize the path impairments are discussed, which include: tropospheric effects, including gaseous attenuation, cloud and rain attenuation, fog attenuation, refraction and scintillation; surface reflection (multipath) effects; ionospheric effects such as scintillation; and environmental effects (aircraft motion, sea state, land surface type). Aeronautical mobile-satellite systems may operate on a worldwide basis, including propagation paths at low elevation angles. Several measurements of multipath parameters over land and sea were conducted. In some cases, laboratory simulations are used to compare measured data and verify model parameters. The received signals is considered in terms of its possible components: a direct wave subject to atmospheric effects, and a reflected wave, which generally contains mostly a diffuse component.

Davarian, Faramaz↗

NASA NTRS1989

Parallel and vector computation for stochastic optimal control applications

A general method for parallel and vector numerical solutions of stochastic dynamic programming problems is described for optimal control of general nonlinear, continuous time, multibody dynamical systems, perturbed by Poisson as well as Gaussian random white noise. Possible applications include lumped flight dynamics models for uncertain environments, such as large scale and background random atmospheric fluctuations. The numerical formulation is highly suitable for a vector multiprocessor or vectorizing supercomputer, and results exhibit high processor efficiency and numerical stability. Advanced computing techniques, data structures, and hardware help alleviate Bellman's curse of dimensionality in dynamic programming computations.

Hanson, F. B.↗

NASA NTRS1990

Planar measurement of flow field parameters in a nonreacting supersonic combustor using laser-induced iodine fluorescence

A nonintrusive optical technique, laser-induced iodine fluorescence, has been used to obtain planar measurements of flow field parameters in the supersonic mixing flow field of a nonreacting supersonic combustor. The combustor design used in this work was configured with staged transverse sonic injection behind a rearward-facing step into a Mach 2.07 free stream. A set of spatially resolved measurements of temperature and injectant mole fraction has been generated. These measurements provide an extensive and accurate experimental data set required for the validation of computational fluid dynamic codes developed for the calculation of highly three-dimensional combustor flow fields.

Hartfield, Roy J., Jr.↗

NASA NTRS1994

Hyflite TPS Domain Test Results Ames 2x9 Turbulent Flow Duct

Detailed experimental data have been obtained on several advanced TUFI systems during their exposure to high temperature high shear supersonic turbulent flow. Dimensional stability of these systems were determined at surface temperatures above 3000 F. Effect of step gap configuration on the thermal performance of the TUFI systems were also evaluated.

Stewart, David A.↗

NASA NTRS2017

Atmospheric Form Drag Coefficients Over Arctic Sea Ice Using Remotely Sensed Ice Topography Data, Spring 2009-2015

Sea ice topography significantly impacts turbulent energy/momentum exchange, e.g., atmospheric (wind) drag, over Arctic sea ice. Unfortunately, observational estimates of this contribution to atmospheric drag variability are spatially and temporally limited. Here we present new estimates of the neutral atmospheric form drag coefficient over Arctic sea ice in early spring, using high-resolution Airborne Topographic Mapper elevation data from NASA's Operation IceBridge mission. We utilize a new three-dimensional ice topography data set and combine this with an existing parameterization scheme linking surface feature height and spacing to form drag. To be consistent with previous studies investigating form drag, we compare these results with those produced using a new linear profiling topography data set. The form drag coefficient from surface feature variability shows lower values [less than 0.5-1 × 10(exp. −3)] in the Beaufort/Chukchi Seas, compared with higher values [greater than 0.5-1 ×10(exp. −3)] in the more deformed ice regimes of the Central Arctic (north of Greenland and the Canadian Archipelago), which increase with coastline proximity. The results show moderate interannual variability, including a strong increase in the form drag coefficient from 2013 to 2014/2015 north of the Canadian Archipelago. The form drag coefficient estimates are extrapolated across the Arctic with Advanced Scatterometer satellite radar backscatter data, further highlighting the regional/interannual drag coefficient variability. Finally, we combine the results with existing parameterizations of form drag from floe edges (a function of ice concentration) and skin drag to produce, to our knowledge, the first pan-Arctic estimates of the total neutral atmospheric drag coefficient (in early spring) from 2009 to 2015.

sea ice↗

NASA NTRSDate not supplied

A Procedure to Quantify Interlaminar Damage in Refractory Composites by In-Situ Micro-X-Ray Computed Tomography

Refractory composites are relevant for hot-structure applications on re-entry vehicles. To develop optimized high-performance hot structures, accurate material property data is required. Material properties that often limit design in two-dimensional (2-D) composites are interlaminar strengths. A better understanding of the failure mechanisms for interlaminar shear (ILS), interlaminar tension (ILT), and curved-beam interlaminar tension (CB-ILT) tests can provide insight on improving the design and fabrication of refractory composites. In-situ tests were performed to capture the progressive failure in American Society for Testing and Materials (ASTM) sized ILS (ASTM D3846), ILT (ASTM D7291), and CB-ILT (ASTM D6415) specimens. Before measuring internal damage of refractory composites specimens, the methodology of the test setup warrants a complete and thorough discussion. Detail on the test procedure, test stand design, micro-x-ray computed tomography (CT) configuration, data processing, and CT system uncertainty is discussed. Through keeping the many parameters of the CT system consistent, the uncertainty of the CT system was minimized, optimizing the quality of measurements. The overall quality of a CT scan can be quantified by three metrics: voxel resolution, minimal voxel resolution feature detection, and directional variability. A better understanding of the progressive failure mechanisms of refractory composites is provided by the results of both the present discussion and the one found in the accompanying paper titled “Analysis of Interlaminar Damage in Refractory Composites by In-Situ Micro-X-Ray Computed Tomography”.

In-situ micro-x-ray CT↗

NASA NTRSDate not supplied

Analysis of Interlaminar Damage in Refractory Composites by In-Situ Micro-X-Ray Computed Tomography

Refractory composites are relevant for hot-structure applications on re-entry vehicles. To develop optimized high-performance hot structures, accurate material property data is required. Material properties that often limit design in two-dimensional (2-D) composites are interlaminar strengths. A better understanding of the failure mechanisms for interlaminar shear (ILS), interlaminar tension (ILT), and curved-beam interlaminar tension (CB-ILT) tests can provide insight on improving the design and fabrication of refractory composites. In-situ tests were performed to capture the progressive failure in American Society for Testing and Materials (ASTM) sized ILS (ASTM D3846), ILT (ASTM D7291), and CB-ILT (ASTM D6415) specimens. The present study investigates the change in material behavior by examining the macro porosity change in in-situ ILS tests, the mesoscale and inter-ply porosity changes in flatwise in-situ ILT tests and the change in per-ply delamination in in-situ CB-ILT tests.

In-situ Damage Characterization↗

DOE OSTI2026

Data-based filtered dissipation rate modelling for multi-modal turbulent combustion: evaluating a priori model generalizability

Manifold-based models offer a computationally efficient alternative to directly transporting the thermochemical state in computational simulations of turbulent reacting flows, projecting the high-dimensional thermochemical state-space onto a low-dimensional manifold. Recent efforts have yielded a manifold-based model applicable to multi-modal combustion, enabling reconstruction of the thermochemical state from solutions to two-dimensional manifold equations in mixture fraction and generalized progress variable that are parameterised by three scalar dissipation rates. In coarse-grained simulations such as Large Eddy Simulation (LES), closure of the multi-modal manifold equations and subfilter variances/covariance requires closure of three filtered scalar dissipation rates. Here, the present work adopts a data-based approach, providing closure for the three filtered scalar dissipation rates via deep neural networks (DNNs). High-fidelity datasets corresponding to an autoigniting n-dodecane jet flame and a bluff body swirl-stabilized confined lifted spray flame of two aviation fuels (Jet-A and C1) with different ignition propensities are leveraged to generate training data that spans a diverse range of thermodynamic conditions and combustion modes, including low- and high-temperature ignition regimes in addition to premixed and nonpremixed behaviour. A final DNN model is trained to enforce inherent physical constraints by learning nonlinear functional transformations of the three filtered scalar dissipation rates. The generalizability of this constrained DNN model is demonstrated a priori via conditional statistics evaluated on the lifted spray flame with C1–a configuration that had not been included in the training data. Excellent DNN agreement with conditional DNS statistics is observed, and integrated gradients are computed to identify the most sensitive input variables. The similarity of the marginal PDFs of the most informative input variables and outputs across configurations are quantified via the Wasserstein metric, demonstrating that data-based models may successfully generalize to unseen parametric conditions so long as the most informative input variables share similar distributions across training and testing datasets.

Data-based modelling↗

NASA NTRS1979

High speed smoke flow visualization for the determination of cascade shock losses

A flow visualization technique has been developed by which quantitative cascade shock loss data can be ascertained without the interference effects of intrusive probes. The technique is first proven feasible by studying the high speed wind tunnel flow around a variety of two-dimensional shapes. Applicability is demonstrated by the testing of a 5% thick sharp-edged flat plate cascade at an upstream Mach number of about 1.3. Results are compared with the relevant theory and total pressure probe data.

Slovisky, J. A.↗

DOE OSTI2025

Advancing the Frontiers of Deep Learning for Low-Dose 3D Cone-Beam CT Reconstruction

X-ray computed tomography (CT) is an important noninvasive medical imaging modality for studying the structural details of internal organs. Image reconstruction in CT is an inverse problem of recovering an object's internal structure from the absorption profile of X-ray beams (sinogram) measured using a detector. The classical variational approach for CT reconstruction minimizes an energy functional using an appropriate iterative algorithm. Motivated by the success of deep learning (DL), researchers have begun to leverage training data and enhanced computing capabilities in recent years to produce high-fidelity reconstructed images. Nonetheless, much of the academic research in DL algorithms for CT has focused primarily on the two-dimensional setting (with simplified forward operators and noise model) for proofs-of-concept, and a comprehensive benchmarking of various classical and data-driven CT reconstruction approaches has not beenundertaken. The key objective of our CT reconstruction grand challenge was to promote methodological advancements for both classical and DL-based approaches for clinical CT with a reasonably accurately simulated 3D CT forward operator and noise model. We have utilized the publicly available LIDC-IDRI dataset and simulated sinograms and FDK images corresponding to two dose levels (clinical- and low-dose, constituting two tracks of the challenge) starting from the normal-dose images as the ground truth. In this paper, we summarize the motivation, context, and results of our challenge, and highlight the future research directions in DL for clinical CT.

X-ray tomography↗

NASA NTRS1985

Three-dimensional inviscid analysis of radial turbine flow and a limited comparison with experimental data

The three-dimensional inviscid DENTON code is used to analyze flow through a radial-inflow turbine rotor. Experimental data from the rotor are compared with analytical results obtained by using the code. The experimental data available for comparison are the radial distributions of circumferentially averaged values of absolute flow angle and total pressure downstream of the rotor exit. The computed rotor-exit flow angles are generally underturned relative to the experimental values, which reflect the boundary-layer separation at the trailing edge and the development of wakes downstream of the rotor. The experimental rotor is designed for a higher-than-optimum work factor of 1.126 resulting in a nonoptimum positive incidence and causing a region of rapid flow adjustment and large velocity gradients. For this experimental rotor, the computed radial distribution of rotor-exit to turbine-inlet total pressure ratios are underpredicted due to the errors in the finite-difference approximations in the regions of rapid flow adjustment, and due to using the relatively coarser grids in the middle of the blade region where the flow passage is highly three-dimensional. Additional results obtained from the three-dimensional inviscid computation are also presented, but without comparison due to the lack of experimental data. These include quasi-secondary velocity vectors on cross-channel surfaces, velocity components on the meridional and blade-to-blade surfaces, and blade surface loading diagrams. Computed results show the evolution of a passage vortex and large streamline deviations from the computational streamwise grid lines. Experience gained from applying the code to a radial turbine geometry is also discussed.

Choo, Y. K.↗

NASA NTRS1985

Three-dimensional inviscid analysis of radial-turbine flow and a limited comparison with experimental data

The three-dimensional inviscid DENTON code is used to analyze flow through a radial-inflow turbine rotor. Experimental data from the rotor are compared with analytical results obtained by using the code. The experimental data available for comparison are the radial distributions of circumferentially averaged values of absolute flow angle and total pressure downstream of the rotor exit. The computed rotor-exit flow angles are generally underturned relative to the experimental values, which reflect the boundary-layer separation at the trailing edge and the development of wakes downstream of the rotor. The experimental rotor is designed for a higher-than-optimum work factor of 1.126 resulting in a nonoptimum positive incidence and causing a region of rapid flow adjustment and large velocity gradients. For this experimental rotor, the computed radial distribution of rotor-exit to turbine-inlet total pressure ratios are underpredicted due to the errors in the finite-difference approximations in the regions of rapid flow adjustment, and due to using the relatively coarser grids in the middle of the blade region where the flow passage is highly three-dimensional. Additional results obtained from the three-dimensional inviscid computation are also presented, but without comparison due to the lack of experimental data. These include quasi-secondary velocity vectors on cross-channel surfaces, velocity components on the meridional and blade-to-blade surfaces, and blade surface loading diagrams. Computed results show the evolution of a passage vortex and large streamline deviations from the computational streamwise grid lines. Experience gained from applying the code to a radial turbine geometry is also discussed.

Choo, Y. K.↗

NASA NTRS1986

Navier-Stokes computations of lee-side flows over delta wings

Solutions to the Navier-Stokes equations for the flow over delta wings are computed with emphasis on the separated vortical flows developing on the lee side at high angles of attack. A recently developed implicit algorithm is used which employs upwind differencing for the pressure and convection terms and central differencing for the shear stress and heat transfer terms. Solutions to both the three-dimensional equations and the approximate conical flow equations are compared parametrically with an extensive experimental data base at supersonic speeds. The computations indicate that the conical flow approximation provides results in close agreement with the three-dimensional equations, even to angles of attack as high as 20 degrees. Good agreement with experimentally measured pressures and vapor screen photographs is obtained for the conditions investigated. The method predicts the classical pattern of vortical flow over a delta wing and transition to other flow patterns as the leading edge sweep angle and leading edge normal Mach number are varied.

Thomas, J. L.↗

DOE OSTI2026

Beyond microbial abundance: metadata integration enhances disease prediction in human microbiome studies

Multiple studies have highlighted the interaction of the human microbiome with physiological systems such as the gut, immune, liver, and skin, via key axes. Advances in sequencing technologies and high-performance computing have enabled the analysis of large-scale metagenomic data, facilitating the use of machine learning to predict disease likelihood from microbiome profiles. However, challenges such as compositionality, high dimensionality, sparsity, and limited sample sizes have hindered the development of actionable models. One strategy to improve these models is by incorporating key metadata from both the human host and sample collection/processing protocols. This remains challenging due to sparsity and inconsistency in metadata annotation and availability. In this paper, we introduce a machine learning-based pipeline for predicting human disease states by integrating host and protocol metadata with microbiome abundance profiles from 68 different studies, processed through a consistent pipeline. Our findings indicate that metadata can enhance machine learning predictions, particularly at higher taxonomic ranks like Kingdom and Phylum, though this effect diminishes at lower ranks. Our study leverages a large collection of microbiome datasets comprising 11,208 samples, therefore enhancing the robustness and statistical confidence of our findings. This work is a critical step toward utilizing microbiome and metadata for predicting diseases such as gastrointestinal infections, diabetes, cancer, and neurological disorders.

Mathematics and Computing↗

NASA NTRS1985

A decentralized square root information filter/smoother

A number of developments has recently led to a considerable interest in the decentralization of linear least squares estimators. The developments are partly related to the impending emergence of VLSI technology, the realization of parallel processing, and the need for algorithmic ways to speed the solution of dynamically decoupled, high dimensional estimation problems. A new method is presented for combining Square Root Information Filters (SRIF) estimates obtained from independent data sets. The new method involves an orthogonal transformation, and an information matrix filter 'homework' problem discussed by Schweppe (1973) is generalized. The employed SRIF orthogonal transformation methodology has been described by Bierman (1977).

Bierman, G. J.↗