SEARCH · Search NASA

Results for “initial data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Validation of a Custom Ball-on-Ring Apparatus and Consideration of Common Issues for Use in Further Testing (SULI Deliverables)

Ceramic materials are well-known for their high hardness and strength but are limited in their application due to low toughness and sudden failure. As a potential solution, inspiration can be taken from dental enamel nanostructure, where undulating rods cause cracks to branch or deflect, increasing the energy needed to cause total fracture of a ceramic part. Following the dental enamel structure, a novel ceramic which uses 3D printed Yttria stabilized Zirconia rods in an alumina matrix was developed. To test this bio-inspired ceramic material, a proper testing apparatus needed to be created and tested to verify its accuracy. For this project, a bespoke ball on ring testing apparatus was created and tested using both conventionally sintered alumina disks and purchased alumina disks to validate its accuracy. By comparing the Weibull distribution of rupture strengths measured by the tests to literature values, it was shown that the testing frame had a wide distribution of strength which did not align with literature values on the lower end. Through fractography, it was found that some samples fractured from the contact stress induced by the ball indenter, which could not be used to calculate rupture strength. This fracture was often linked to low stress to failure, which was initiated by a flaw on the surface near the indenter which acted as a stress concentrator. Removal of these samples from the data set increased the accuracy of the reported rupture strength values for the ceramic. Considering the equations for the magnitude of contact and flexural strength, along with observations of initiating flaws, several measures can be taken for testing the bio-inspired composite. These measures include proper polishing of both sides of the sample, reducing sample thickness, and potentially using a softer indenter material.

36 - MATERIALS SCIENCE↗

DOE OSTI2024

The Dynamics of Debris Disk Creation in Neutron Star Mergers

Abstract The detection of GW170817/AT2017gfo inaugurated an era of multimessenger astrophysics, in which gravitational-wave and multiwavelength photon observations complement one another to provide unique insight into astrophysical systems. A broad theoretical consensus exists, in which the photon phenomenology of neutron star mergers largely rests upon the evolution of the small amount of matter left on bound orbits around the black hole or massive neutron star remaining after the merger. Because this accretion disk is far from inflow equilibrium, its subsequent evolution depends very strongly on its initial state, yet very little is known about how this state is determined. Using both snapshot and tracer particle data from a numerical relativity/MHD simulation of an equal-mass neutron star merger that collapses to a black hole, we show how gravitational forces arising in a nonaxisymmetric, dynamical spacetime supplement hydrodynamical effects in shaping the initial structure of the bound debris disk. The work done by hydrodynamical forces is ∼10 times greater than that due to time-dependent gravity. Although gravitational torques prior to remnant relaxation are an order of magnitude larger than hydrodynamical torques, their intrinsic sign symmetry leads to strong cancellation; as a result, hydrodynamical and gravitational torques have a comparable effect. We also show that the debris disk’s initial specific angular momentum distribution is sharply peaked at roughly the specific angular momentum of the merged neutron star’s outer layers, a fewr g c, and identify the regulating mechanism.

Astronomy & Astrophysics↗

DOE OSTI2024

Framework for custom event sample augmentations for ATLAS analysis data

For HEP event processing, data is typically stored in column-wise synchronized containers, such as most prominently ROOT’s TTree, which have been used for several decades to store by now over 1 exabyte. These containers can combine row-wise association capabilities needed by most HEP event processing frameworks (e.g. Athena for ATLAS) with column-wise storage, which typically results in better compression and more efficient support for many analysis use-cases. One disadvantage is that these containers, TTree in the HEP use-case, require to contain the same attributes for each entry/row (representing events), which can make extending the list of attributes very costly in storage, even if those are only required for a small subsample of events. Since the initial design, the ATLAS software framework features powerful navigational infrastructure to allow storing custom data extensions for subsamples of events in separate, but synchronized containers. This allows adding event augmentations to ATLAS standard data products (such as DAOD-PHYS or PHYSLITE) avoiding duplication of those core data products, while limiting their size increase. For this functionality, the framework does not rely on any associations made by the I/O technology (i.e. ROOT), however it supports TTree friends and builds the associated index to allow for analysis outside of the ATLAS framework. A prototype based on the Long-Lived Particle search is implemented and preliminary results with this prototype will be presented. At this point, augmented data are stored within the same file as the core data. Storing them in separate files will be investigated in future, as this could provide more flexibility, e.g. certain sites may only want a subset of several augmentations or augmentations can be archived to tape once their analysis is complete.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Correlations between azimuthal anisotropy and mean transverse momentum in pp, pPb, and peripheral PbPb collisions

Correlations between azimuthal anisotropy and mean transverse momentum of charged particles in proton-proton (pp), proton-lead (pPb), and peripheral lead-lead (PbPb) collisions are presented as a function of charged particle multiplicity. The pp, pPb and PbPb collision data were collected using the CMS detector at the LHC with a center-of-mass energy per nucleon pair of 13, 8.16 and 5.02 TeV, respectively. The two- and four-particle cumulants for the second- and third-order Fourier anisotropy harmonics are correlated with the mean transverse momentum of charged particles on an event-by-event basis. In pp and pPb systems, the observed correlation coefficients based on two-particle cumulants are found to change from negative to positive values as the charged particle multiplicity decreases. The sign changes disappear when the correlated particles are required to be further apart in pseudorapidity. Additionally, no sign changes in correlation coefficients are observed when employing four-particle cumulants. Models incorporating initial-state gluon saturation and final-state hydrodynamic evolutions are compared to pPb data and the predicted sign changes are not observed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Influence of Local Water Vapor Analysis Uncertainty on Ensemble Forecasts of Tropical Cyclogenesis Using Hurricane Irma (2017) as a Testbed

Abstract Tropical cyclone formation is known to require abundant water vapor in the lower to middle troposphere within the incipient disturbance. In this study, we assess the impacts of local water vapor analysis uncertainty on the predictability of the formation of Hurricane Irma (2017). To this end, we reduce the magnitude of the incipient disturbance’s water vapor perturbations obtained from an ensemble-based data assimilation system that constrained moisture by assimilating all-sky infrared and microwave radiances. Five-day ensemble forecasts are initialized two days before genesis using each set of modified analysis perturbations. Growth of convective differences and intensity uncertainty are evaluated for each ensemble forecast. We observe that when initializing an ensemble forecast with only moisture uncertainty within the incipient disturbance, the resulting intensity uncertainty at every lead time exceeds half that of an ensemble containing initial perturbations to all variables throughout the domain. Although ensembles with different initial moisture uncertainty amplitudes reveal a similar pathway to genesis, uncertainty in genesis timing varies substantially across ensembles since moister members exhibit earlier spinup of the low-level vortex. These differences in genesis timing are traced back to the first 6–12 h of integration, when differences in the position and intensity of mesoscale convective systems across ensemble members develop more quickly with greater initial moisture uncertainty. In addition, the rapid growth of intensity uncertainty may be greatly modulated by the diurnal cycle. Ultimately, this study underscores the importance of targeting the incipient disturbance with high spatiotemporal water vapor observations for ingestion into data assimilation systems. Significance Statement Hurricanes form from clusters of thunderstorms that organize into a coherent system. One of the key ingredients for the formation process is an abundance of moisture. In this study, we test the sensitivity of hurricane formation to the initial moisture content in the vicinity of the cluster of thunderstorms that would become Hurricane Irma (2017). To do so, we initialize sets of forecasts each having a different variability of initial moisture content within the embryonic disturbance. Our results show that the predictability of hurricane formation is highly dependent on the uncertainty of the moisture content within the initial disturbance. Consequently, more high-quality observations of the moisture within the precursor disturbances to hurricanes are expected to improve forecasts of their formation.

Hartman, Christopher M.↗

DOE OSTI2025

The Baby Universe is Fine and the CFT Knows It: On Holography for Closed Universes

Big bang/big crunch closed universes can be realized in AdS/CFT, even though they lack asymptotically AdS boundaries. With enough bulk entanglement, the bulk Hilbert space of a closed universe can be holographically encoded in the CFT. We clarify the relation of this encoding to observer-clone proposals and refute recent arguments about the breakdown of semiclassical physics in such spaces. In the limit of no bulk entanglement, the holographic encoding breaks down. The oft-cited one-dimensional nature of the closed universe Hilbert space represents the limitation of the external (CFT) Hilbert space to access the quantum information in the closed universe, similar to the limitations imposed on observers outside a perfectly isolated quantum lab. We advocate that the CFT nevertheless continues to determine the physical properties of the closed universe in this regime, showing how to interpret this relationship in terms of a final state projection in the closed universe. We provide a dictionary between the final state wavefunction and CFT data. We propose a model of the emergence of an arrow of time in the universe with a given initial or final state projection. Finally, we show that the conventional EFT in the closed universe, without any projection, can be recovered as a maximally ignorant description of the final state. This conventional EFT is encoded in CFT data, and it can be probed by computing coarse-grained observables. We provide an example of one such observable. Taken together, these results amount to a clean bill of health for baby universes born of AdS/CFT.

FOS: Physical sciences↗

DOE OSTI2024

A comprehensive numerical investigation on spray models for Direct-Injection Spark-Ignition engines

Gasoline direct-injection spark-ignition (DISI) engines generate a large portion of their unburned hydrocarbon (UHC) and soot emissions during the cold-start phase. A predictive computational fluid dynamics (CFD) modeling framework can be used to understand the physical processes that characterize fuel spray evolution and fuel-film formation at cold start conditions, which can help to reduce engine-out particulate emissions. This study systematically evaluated spray submodels and developed a set of simulation best practices for physical-numerical submodels with the goal of enabling accurate simulations of liquid spray behavior in a DISI engine. Three comprehensive experimental datasets containing free-spray projected liquid volume (PLV), liquid volume fraction (LVF), and near-field X-ray radiography data were used to validate the simulation results and evaluate the spray submodels. Systematic analysis delved into injected parcel distribution, droplet collision, spray breakup, and evaporation via a detailed assessment of the relevant spray submodels. Moreover, the effects of turbulence models and the initial turbulent flow properties on the liquid spray evolution were examined. Based on extensive calibration efforts, a set of simulation best practices for the free spray was developed and validated against the PLV/LVF data. Simulation results indicated that the uniform distribution for parcel initialization, coupled with appropriate droplet collision submodels, provides an improved spray morphology compared to the cluster distribution. The findings also underscored the importance of calibrating the Kelvin-Helmholtz Rayleigh-Taylor (KH-RT) breakup model constants and droplet heat transfer coefficient scaling factor to achieve favorable agreement regarding measured liquid penetration and spray widths. In conclusion, this study marks a substantial stride towards accurately predicting fuel film evolution and soot formation within DISI engine performance.

ECN Spray G↗

DOE OSTI2026

Supervisory Control and Data Acquisition for Electrochemical Separation Experimentation

The Python-based program is a laboratory automation tool designed to control and monitor electrochemical systems. The tool was developed for capacitive deionization (CDI) experiments, but it can be used for any system that requires controlled voltage or current segments and multi-parameter monitoring. The program integrates hardware components to run user-defined experimental parameters, providing operational control of a programmable power supply, peristaltic pump, and data acquisition devices. Currently, the program is structured with a workflow that includes an initialization (or pre-run) phase, a main loop, and a post-experiment stabilization (or post-run) phase. The initialization phase prepares and stabilizes the cell, ensuring that the electrodes and solution reach a baseline state before the experiment begins. The main loop consists of multiple voltage segments that repeat, controlling the experiment while recording key parameters such as time, voltage, current, pH, and conductivity. Finally, the post-experiment stabilization phase allows the system to stabilize after the experiment, returning the cell and solution to equilibrium conditions before ending the sequence. The program is designed with four variations, each tailored to different experimental needs. All variations include both the initialization and post-experiment stabilization stages, which run for a set amount of time, voltage, current, and flow rate before and after the main experiment block. The main loop runs for a set number of cycles, as defined by the user input, and each cycle is composed of 2 or 4 segments. The 4 program variations are described as follows: Program 1: The main program includes 2 segments. Each segment is defined to have a set duration, flow rate, voltage, and current. This program measures conductivity, flow rate, voltage, and current. Program 2: The main program expands Program 1 to include 4 segments. Each segment has a specified duration, flow rate, voltage, and current. Like Program 1, it measures conductivity, flow rate, voltage, and current. Program 3: The main program consists of 2 segments, each defined by time, flow rate, voltage, and current. In addition to conductivity, flow rate, voltage, and current, Program 3 collects pH and temperature data through a 4-channel data acquisition device. Program 4: This program independently controls two channels of a multi-channel power supply simultaneously. While conductivity can only be measured for one cell at a time, the dual-channel control makes it possible to operate two cells simultaneously under different voltage/current conditions. The main program includes 2 segments.For each program, all measurements are automatically logged and integrated into a single Excel output file. Data are displayed in numerical format and plotted, both in real time, to track system performance. A key feature of the program is its ability to synchronize all outputs so that every measurement shares a single timestamp, ensuring accurate alignment of voltage, current, pH, conductivity, and pH data.By combining hardware control, real-time monitoring, and unified data collection, this program significantly reduces manual workload and minimizes errors, making it a reliable platform for researchers, engineers, and laboratory technicians conducting CDI experiments, among other electrochemical tests.

Valentino, Lauren [Argonne National Laboratory (AN↗

DOE OSTI2024

Simulations of nozzle gas flow and gas-puff Z-pinch implosions on the Weizmann Z-pinch

We present simulations of an oxygen gas puff Z-pinch on a University scale generator at the Weizmann Institute of Science. The work accounts for the detailed geometry of the nozzle, the initial neutral gas density distribution, and the subsequent implosion. The modeling results show significant improvement with data for the current at the time of stagnation in comparison with a previous effort [Rosenzweig et al., Phys. Plasmas 27, 022705 (2020)]. As a first step, we performed simulations of the flow of neutral diatomic oxygen from a plenum through a nozzle within a recessed cathode, across a gap, and into the anode with a recessed grounded honeycomb. These simulations show an agreement with the measured initial gas density profiles within the region not blocked by the recesses and accessible to visible measurements. The computed neutral gas flow profile serves as the initial condition for a radiation magnetohydrodynamic simulation of the implosion using the MACH2-TCRE code. By considering the specific details of the nozzle and chamber geometry, we find agreement with the measured current profile, including the inductive notch. The simulations predict that the plasma undergoes a strong pinch within the hidden anode recess. The simulations also predict the strongest radiation pulse occurs within the anode recess and at the time of the observed inductive notch.

Physics↗

DOE OSTI2026

Diesel Fuel Consumption in Prominent U.S. Open-Pit Mines: Site-Level Estimates

This report presents a comprehensive framework for estimating diesel fuel consumption and prices at open-pit mines in the United States. The framework includes transparent methods for calculating site-level diesel energy use when direct reporting is unavailable, and a structured confidence evaluation for each method. The framework is demonstrated to estimate current diesel consumption at 21 open-pit mines in the United States. Initial findings support ongoing efforts to strengthen the competitiveness and security of the U.S. industrial base by supporting data-driven supply chain analysis and decision-making, improved transparency in mining sector energy use, and targeted deployment of energy innovation and cost-reduction strategies. Future updates to the dataset—coupled with expanded data transparency and method validation—will help ensure that the findings remain relevant as the sector continues to evolve.

02 PETROLEUM↗

DOE OSTI2024

Understanding Event Trajectories Across Massive Temporal Datasets with Word Embeddings and Visualization

In collaboration with researchers from Virginia Tech, Savannah River National Laboratory has continued development of a natural language processing pipeline to identify and extract events of interest from massive open data sources in the domain of worldwide state-sponsored civil nuclear energy. The foundation of the pipeline is built on compass aligned temporal word embedding models, whereby contextual shifts are automatically identified by comparing keyword embedding vectors across successive time windows. Within the approach, a contextual shift indicates the occurrence of a potential event of interest. However, in such a broad topical domain that captures events at a global scale, across various life cycle stages, and across numerous different technology types, a user that is monitoring events may have broad interests in capturing many different event types with varying degrees of signal. As such, the quantity of information that may be returned from an automated event extraction pipeline can be substantial, requiring manual effort to sift through the information to identify any relevant bits of information. Therefore, a more streamlined workflow that aids in directing a user toward specific information at different points in time is necessary. The workflow presented here has been developed with this concept in mind, built on top of the initial prototype event extraction pipeline, whereby a user can analyze temporal text-based data sources at multiple different contextual levels to isolate key points in time and key subdomains captured within a data corpus. Using multiple corpuses that consist of approximately 7 million Tweets and 7 million news articles, the team has extended compass aligned temporal word embedding models to establish an interconnected and hierarchical structure that relates known key words of interest to documents, local topics (i.e., within a time window), and global topics across the corpuses. All of this information is packaged into a visual analytics system that is linked to the information extraction pipeline and enables a user to identify contextual information that describes the evolution of a high dimensional embedding space across time to isolate changes of interest and explore associated events. This report demonstrates the use of these analytics and a means to fuse information across multiple datasets.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

The use of digital thread for reconstruction of local fiber orientation in a compression molded pin bracket via deep learning

A deep convolutional neural network (DCNN) was used for microstructure reconstruction using artificial intelligence (MR-AI) by predicting local average fiber orientation distributions (FOD) in a 3D prepreg platelet molded composite (PPMC) pin bracket. To train the MR-AI model, surface strain fields from residual stresses simulated in PPMC plates were used as the input to the DCNN. A training dataset included PPMC plates with various degrees of global fiber alignment, based on the information obtained from high-fidelity flow simulation of a pin bracket. Further, the MR-AI model was then deployed to analyze FOD in the 3D pin bracket by conducting thermo-elastic residual stress analysis. Initially, the MR-AI model was established entirely on the synthetic simulation data. Then, a μCT scan of a physically molded pin bracket was used to create a finite element model that provided data for additional validation of the DCNN model. For the μCT scan finite element pin bracket the MR-AI model predicted the distribution of fiber orientation tensor components with MAE of 0.10 indicating a global prediction error of 10%. For the flow simulated pin bracket, the MR-AI model predicted the distribution of fiber orientation tensor components with a global prediction error of 11%. The MR-AI model showed the ability to predict regions of varying alignment in the base and flange of the pin bracket. The proposed MR-AI methodology allows for rapid prediction of FOD in geometrically complex parts and offers a promising path to detecting unique fiber orientation states in molded components.

42 ENGINEERING↗

DOE OSTI2025

Acid-Catalyst is Required for Hydrogenolysis of a Late Metal Hydroxo Complex

The cationic AuIII pincer complex [(tBuPCP)AuIII -OH]OTf (AuOH, tBuPCP = 2,6-(CH2PtBu2)2C6H3) was prepared and characterized. In contrast to hydrogenolysis reactions of other late metal-hydroxides, the hydrogenolysis of AuOH to form the corresponding AuIII -H and water is shown to require an acid catalyst. The kinetic data, collected in acetone-d6, are consistent with a reaction mechanism involving initial protonation to form the AuIII aquo complex, [(tBuPCP)AuIII -OH2](OTf)2 (AuOH2), which was isolated and characterized. Following substitution of the water by coordinating solvent, the dicationic AuIII center undergoes electrophilic activation of H2 to generate the [(tBuPCP)AuIII -H]OTf product (AuH). The mechanism of hydrogenolysis is supported by experimental and computational (DFT) results. A AuIII dihydrogen complex (Au(H2)) was located along the potential energy surface for the reaction and computations indicate that deprotonation of Au(H2) by acetone solvent is barrierless. The bonding and properties of the proposed AuIII -H2 complex are consistent with predictions made for high-valent, electrophilic metal-dihydrogen complexes.

Ardon, Yotam [University of Pennsylvania] (ORCID:0↗

DOE OSTI2024

Multi-scale Simulation, Calibration, and Optimization of Calcium Carbonate Precipitation in Microbial Communities

Ensuring the efficient engineering of microbially induced calcium carbonate precipitation (MICP) is crucial for a variety of environmental and civil engineering applications, such as soil stabilization and carbon sequestration. Addressing this need, we present a comprehensive multi-scale workflow that begins with the isolation of calcium carbonate-producing microbes from soil samples, followed by metagenomic sequencing and metabolic reconstruction. We then characterize microbial growth phenotypes under diverse nutrient conditions, compare observed growth with metabolic model predictions, and apply the Consistent Reproduction of Phenotype (CROP) algorithm to refine these models. Furthermore, we analyze metabolite consumption and production, and develop a consumer-resource model that is calibrated using time-series measurements of growth rates, pH levels, and calcium carbonate precipitation. The primary benefit of our approach lies in its ability to predict and control MICP outcomes, facilitated by a Bayesian methodology that incorporates priors on initial conditions and parameters. This allows us to compute posteriors by integrating experimental data, and to solve a risk optimization problem under uncertainty to identify nutrient conditions that maximize calcium carbonate production. In contrast to non-Bayesian methods, which fail to quantify uncertainty accurately, our approach provides a more reliable pathway to optimizing nutrient conditions, enhancing the likelihood of achieving desired MICP outcomes. This positions our method as a superior alternative in the quest to improve MICP through engineered microbial consortia.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

CMCSCFCB—Critical Minerals in Coaly Strata of the Cherokee-Forest City Basin

This report summarizes results of CMCSCFCB—Critical Minerals in Coaly Strata of the Cherokee-Forest City Basin, a multiyear and multidisciplinary study funded through DE-FOA-0002364 as part of the Department of Energy Office of Fossil Energy and Carbon Management (FECM) Carbon Ore, Rare Earth and Critical Minerals (CORE-CM) Initiative for U.S. Basins. Our working group of state and tribal agencies collected data and made interpretations included herein. It also surveyed the regional potential for critical mineral/material production.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2025

Report on Preliminary Detailed Experimental Plan for Neutron Irradiation of A709 at ATR and HFIR

Advanced nuclear power technologies will use higher temperatures as a means to extract energy at a higher efficiency than current plants and therefore put a larger demand on the structural materials. Improved performance of structural materials could enable greater safety margins, longer plant lifetimes, and reduce maintenance costs. Alloy 709 is championed as the next generation of austenitic alloys for advanced nuclear reactors. In parallel to the ASME code case pursued, the AMMT program is initiating a neutron irradiation campaign to provide first-of-a-kind engineering data to establish operational design parameters and how the mechanical response is modified by environmental factors. This document refines the AMMT neutron irradiation campaign to a 4 year program to support the generation of creep knockdown factors for Alloy 709 and welded Alloy 709. The campaign is divided among two national laboratories, Oak Ridge National Laboratory and Idaho National Laboratory, to use the strengths of each laboratory. Through a cooperative plan, time-independent properties and time-dependent properties will be obtained across a large temperature window, nominally 300°C to 800°C, damage levels up to 10 dpa, and with and without the impacts of transmutation produced helium.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2026

Report on Preliminary Detailed Experimental Plan for Neutron Irradiation of A709 at ATR and HFIR

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2025

Design, Build, and Initial Testing of a Portable Methane Measurement Platform

The quantification of methane concentrations in air is essential for the quantification of methane emissions, which in turn is necessary to determine absolute emissions and the efficacy of emission mitigation strategies. These are essential if countries are to meet climate goals. Large-scale deployment of methane analyzers across millions of emission sites is prohibitively expensive, and lower-cost instrumentation has been recently developed as an alternative. Currently, it is unclear how cheaper instrumentation will affect measurement resolution or accuracy. To test this, the Wireless Autonomous Transportable Methane Emission Reporting System (WATCH 4 ERS) has been developed, comprising four commercially available sensing technologies: metal oxide (MOx,), Non-dispersion Infrared (NDIR), integrated infrared (INIR), and tunable diode laser absorption spectrometer (TDLAS). WATCHERS is the accumulated knowledge of several long-term methane measurement projects at Colorado State University’s Methane Emission Technology Evaluation Center (METEC), and this study describes the integration of these sensors into a single unit and reports initial instrument response to calibration procedures and controlled release experiments. Specifically, this paper aims to describe the development of the WATCH 4 ERS unit, report initial sensor responses, and describe future research goals. Meanwhile, future work will use data gathered by multiple WATCH 4 ERS units to 1. better understand the cost–benefit balance of methane sensors, and 2. identify how decreasing instrumentation costs could increase deployment coverage and therefore inform large-scale methane monitoring strategies. Both calibration and response experiments indicate the INIR has little practical use for measuring methane concentrations less than 500 ppm. The MOx sensor is shown to have a logarithmic response to methane concentration change between background and 600 ppm but it is strongly suggested that passively sampling MOx sensors cannot respond fast enough to report concentrations that change in a sub-minute time frame. The NDIR sensor reported a linear change to methane concentration between background and 600 ppm, although there was a noticeable lag in reporting changing concentration, especially at higher values, and individual peaks could be observed throughout the experiment even when the plumes were released 5 s apart. The TDLAS sensor reported all changes in concentration but remains prohibitively expensive. Our findings suggest that each sensor technology could be optimized by either operational design or deployment location to quantify methane emissions. The WATCH4ERS units will be deployed in real-world environments to investigate the utility of each in the future.

47 OTHER INSTRUMENTATION↗