Search NASA⌕ Search

SEARCH · Search NASA

Results for “intense”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Loss-compensation of intensity-modulating fiber-optic sensors

This report describes a new type of intensity-modulating fiber-optic sensor which has high immunity to the effects of variations in the losses of the fiber-link. A variable-splitting-ratio transducer is used to differentially modulate the intensities of the light which it transmits and reflects. Using a four-fiber optical link, light is impinged onto the transducer from either direction, and, in each case, the transmitted and reflected signals are measured. These four signals are then processed to remove the effects of the fiber and connector losses. Loss-compensated sensors of angular position and displacement are described, and their outputs are shown to be highly stable despite considerable variations in the transmissivities of the fiber-link components.

Beheim, G.↗
NASA NTRS1987

Stress-intensity factor calculations using the boundary force method

The Boundary Force Method (BFM) was formulated for the three fundamental problems of elasticity: the stress boundary value problem, the displacement boundary value problem, and the mixed boundary value problem. Because the BFM is a form of an indirect boundary element method, only the boundaries of the region of interest are modeled. The elasticity solution for the stress distribution due to concentrated forces and a moment applied at an arbitrary point in a cracked infinite plate is used as the fundamental solution. Thus, unlike other boundary element methods, here the crack face need not be modeled as part of the boundary. The formulation of the BFM is described and the accuracy of the method is established by analyzing a center-cracked specimen subjected to mixed boundary conditions and a three-hole cracked configuration subjected to traction boundary conditions. The results obtained are in good agreement with accepted numerical solutions. The method is then used to generate stress-intensity solutions for two common cracked configurations: an edge crack emanating from a semi-elliptical notch, and an edge crack emanating from a V-notch. The BFM is a versatile technique that can be used to obtain very accurate stress intensity factors for complex crack configurations subjected to stress, displacement, or mixed boundary conditions. The method requires a minimal amount of modeling effort.

Tan, P. W.↗
NASA NTRS1986

Q branches of the nu7 fundamental of ethane (C2H6) Integrated intensity measurements for atmospheric measurement applications

Laboratory spectra covering the nu7 band of ethane (C2H6) have been recorded, and measurements of integrated intensities of selected Q branches from these spectra are reported. The method by which the spectra were obtained is described, and a typical spectrum covering the PQ3 branch at 2976.8/cm is shown along with a plot of equivalent width vs. optical density for this branch. The values of the integrated intensities reported for each branch are the means of five different optical densities.

Rinsland, C. P.↗
NASA NTRS1986

Temperature and intensity dependence of photorefractive effect in GaAs

The photorefractive effect in semi-insulating Cr-doped GaAs as measured by the beam coupling technique was investigated as functions of temperature (295-386 K) and intensity (0.15-98 mW/sq cm of 1.15-micron light beams from a He-Ne laser). Results show that the photorefractive effect deteriorates rapidly over a narrow range of temperature as temperature rises, and that this characteristic temperature increases with the logarithm of beam intensity. The observed phenomenon is attributed to the competing effects of the dark- and light-induced conductivities.

Cheng, Li-Jen↗
NASA NTRS1987

Attenuation of intense sinusoidal waves in air-saturated, bulk porous materials

As intense, initially sinusoidal waves propagate in fluids, shocks form and excess attenuation of the wave occurs. Data are presented indicating that shock formation is not necessary for the occurrence of excess attenuation in nonlinear, lossy media, i.e., air-saturated, porous materials. An empirical equation is used to describe the excess attenuation of intense sinusoids in porous materials. The acoustic nonlinearity of and the excess attenuation in porous materials may be predicted directly from dc flow resistivity data. An empirical relationship is used to relate an acoustic nonlinearity parameter to the fundamental frequency and relative dc nonlinearity of two structurally different materials.

Kuntz, Herbert L.↗
NASA NTRS1988

Stress-intensity factors for small surface and corner cracks in plates

Three-dimensional finite-element and finite-alternating methods were used to obtain the stress-intensity factors for small surface and corner cracked plates subjected to remote tension and bending loads. The crack-depth-to-crack-length ratios (a/c) ranged from 0.2 to 1 and the crack-depth-to-plate-thickness ratios (a/t) ranged from 0.05 to 0.2. The performance of the finite-element alternating method was studied on these crack configurations. A study of the computational effort involved in the finite-element alternating method showed that several crack configurations could be analyzed with a single rectangular mesh idealization, whereas the conventional finite-element method requires a different mesh for each configuration. The stress-intensity factors obtained with the finite-element-alternating method agreed well (within 5 percent) with those calculated from the finite-element method with singularity elements.

Raju, I. S.↗
NASA NTRS1988

The gamma 1 and gamma 3 bands of (16)O3: Line positions and intensities

Using 0.005/cm-resolution Fourier transform spectra of samples of ozone, the gamma 1 and gamma 3 bands of (16)O3 have been reanalyzed to obtain accurate line positions and an extended set of upper state rotational levels (J up to 69, K sub a up to 20). Combined with the available microwave data, these upper state rotational levels were satisfactorily fitted using a Hamiltonian which takes explicitly into account the strong Coriolis interaction affecting the rotational levels of these two interacting states. In addition, 350 relative line intensities were measured from which the rotational expansions of the transition moment operators for the gamma 1 and gamma 3 states have been deduced. Finally, a complete listing of line positions, intensities, and lower state energies of the gamma 1 and gamma 3 bands of (16)O3 has been generated.

Flaud, J.-M.↗
NASA NTRS1988

Line positions and intensities for the gamma 1 + gamma 2 and gamma 2 + gamma 3 bands of (16)O3

Using 0.005 cm-resolution Fourier transform spectra of (16)O3, generated by electric discharge from a greater than 99.98 percent pure sample of (16)O3, an extensive analysis of the gamma 1 + gamma 2 and the gamma 2 + gamma 3 bands in the 5.7 micron region was performed. The rotational energy levels of the upper (110) and (011) vibrational states of (16)O3 were reproduced within their experimental uncertainties using a Hamiltonian which takes explicitly into account the Coriolis-type interaction occurring between the rotational energy levels of both states. Improved vibrational energies and rotational and coupling constants were also derived for the (110) and (011) states. Precise transition moment constants for these two bands were deduced from analysis of 220 measured line intensities. Finally, a complete list of line positions, intensities, and lower state energies for both bands has been generated.

Devi, V. Malathy↗
NASA NTRS1988

Fiber optic sensing systems using high frequency resonant sensing heads with intensity sensors

Optical fibers have an inherent capability of transmitting high bandwidth analog and digital signals. To apply this property of fiber optics to remote sensing, special sensing heads as well as signal processing electronics have to be developed. In systems employing intensity modulating sensors, there is also a need for a referencing technique to compensate for changes in the transmission of the connecting fibers and light source intensity. Fiber optic sensing systems incorporated in sensing heads of a special configuration are discussed. Different modes of operation as well as resonant conditions are explained. Theoretical and experimental analyses are also given.

Adamovsky, Grigory↗
NASA NTRS1986

A determination of sampling intensity to characterize a Landsat MSS scene using two block sizes

Three Landsat MSS scenes were processed to empirically determine the sampling intensity needed to characterize various land cover types including water, conifer, and hardwood. The block sizes used as the sampling units were 497 by 500 pixels (picture elements) and 248 by 250 pixels. It is found that, for a given accuracy criterion, the sampling intensity is dependent on the abundance of the cover type of interest in the MSS scene. The results also indicate that, when using the smaller block size, a smaller percentage of the scene has to be classified to obtain a given level of accuracy.

Horning, N.↗
NASA NTRS1987

Intensities and H2-broadened half-widths of germane lines around 4.7 microns at temperatures relevant to Jupiter's atmosphere

Absolute intensities and H2-broadened half-widths of R(0) and R(1) of Ge-72H4 have been measured at 119.5, 150.3, 199.0, 250.0, and 296.0 K using a tunable diode laser and the sweep integration technique. The combined intensity of the nu3 bands of all of the five isotopic species of GeH4 as well as that of the Q-branches alone have been measured independently at 294 K using the Wilson-Wells-Penner-Weber technique.

Varanasi, P.↗
NASA NTRS1987

Criteria of interplanetary parameters causing intense magnetic storms (Dst of less than -100 nT)

An analysis of ISEE-3 field and plasma data shows that 10 intense magnetic storms that occurred in 1979 were caused by long-duration, large-amplitude (13-30 nT) and negative (less than -10 nT) IMF Bz events associated with interplanetary duskward-electric fields of greater than 5 mV/m. The results suggest that these criteria may be used as predictors of intense storms. A study of opposite polarity (northward) Bz events with the same criteria shows that their occurrence is similar both in number and in their relationship to interplanetary disturbances. The amplitudes of the storms were not found to vary with shock strengths.

Gonzalez, Walter D.↗
NASA NTRS1987

Loss-compensation of intensity-modulating fiber-optic sensors

This report describes a new type of intensity-modulating fiber-optic sensor which as high immunity to the effects of variations in the losses of the fiber-link. A variable-splitting-ratio transducer is used to differentially modulate the intensities of the light which it transmits and reflects. Using a four-fiber optical link, light is impinged onto the transducer from either direction, and, in each case, the transmitted and reflected signals are measured. These four signals are then processed to remove the effects of the fiber and connector losses. Loss-compensated sensors of angular position and displacement are described, and their outputs are shown to be highly stable despite considerable variations in the transmissivities of the fiber-link components.

Beheim, Glenn↗
NASA NTRS1988

(1 + 1) resonant enhanced multiphoton ionization via the A2Sigma(+) state of NO - Ionic rotational branching ratios and their intensity dependence

Rotational branching ratios resulting from the (1 + 1) resonant enhanced multiphoton ionization spectroscopy of NO via the 0-0 transition of the A-X band for the four possible branches that can be assigned as R(21.5) are explored using calculation performed in the frozen-core approximation at the Hartree-Fock level. The four different branches, of which three are distinctly different in the perturbative limit, have rather different branching ratios. The mixed R12 + Q22(21.5) branch, which is not intense and has the lowest transition energy, appears to give the best agreement with experimental branching ratio for parallel detection. The agreement is less satisfactory for perpendicular detection. Neither the effect of finite-acceptance angle of the photoelectron detector nor high intensities can explain the discrepancy.

Rudolph, H.↗
NASA NTRS1988

Rain simulation studies for high-intensity acoustic nose cavities

Unarmed plastic projectiles can be equipped with small axisymmetric cavities for the generation of intense tones that are useful in training maneuvers. Attention is presently given to the simulation of rainfall in an airstream and the effect of rain droplet impingement on the nose of projectiles, and especially to any penetration or accumulation of water at the base of the cavity that might increase the fundamental cavity frequency and/or reduce the intensity of sound production during rain conditions.

Clayton, R. M.↗
NASA NTRS1988

The C IV doublet ratio intensity effect in symbiotic stars

High-resolution UV spectra in the 1200-2000 wavelength range of the symbiotic variable R Aqr and its nebular jet were obtained in July 1987 with the IUE. The line profile structure of the C IV 1548, 1550 doublet in the jet indicates multicomponent velocity structure from an optically thin emitting gas. The C IV doublet profiles in the compact H II region engulfing the Mira and hot companion binary also suggest multicomponent structure with radial velocities up to about -100 km/s. The value of the doublet intensity ratio in the R Aqr H II region has been observed in other similar symbiotic stars, such as RX Pup. It is suggested that the anomalous behavior of the C IV doublet intensities may be useful for studying the spatial structure and temporal nature of winds in symbiotic stars.

Michalitsianos, A. G.↗
NASA NTRS1989

Local intensity adaptive image coding

The objective of preprocessing for machine vision is to extract intrinsic target properties. The most important properties ordinarily are structure and reflectance. Illumination in space, however, is a significant problem as the extreme range of light intensity, stretching from deep shadow to highly reflective surfaces in direct sunlight, impairs the effectiveness of standard approaches to machine vision. To overcome this critical constraint, an image coding scheme is being investigated which combines local intensity adaptivity, image enhancement, and data compression. It is very effective under the highly variant illumination that can exist within a single frame or field of view, and it is very robust to noise at low illuminations. Some of the theory and salient features of the coding scheme are reviewed. Its performance is characterized in a simulated space application, the research and development activities are described.

Huck, Friedrich O.↗
NASA NTRS1989

Power flows and Mechanical Intensities in structural finite element analysis

The identification of power flow paths in dynamically loaded structures is an important, but currently unavailable, capability for the finite element analyst. For this reason, methods for calculating power flows and mechanical intensities in finite element models are developed here. Formulations for calculating input and output powers, power flows, mechanical intensities, and power dissipations for beam, plate, and solid element types are derived. NASTRAN is used to calculate the required velocity, force, and stress results of an analysis, which a post-processor then uses to calculate power flow quantities. The SDRC I-deas Supertab module is used to view the final results. Test models include a simple truss and a beam-stiffened cantilever plate. Both test cases showed reasonable power flow fields over low to medium frequencies, with accurate power balances. Future work will include testing with more complex models, developing an interactive graphics program to view easily and efficiently the analysis results, applying shape optimization methods to the problem with power flow variables as design constraints, and adding the power flow capability to NASTRAN.

Hambric, Stephen A.↗