Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Silica Nanoparticle-Induced Structural Reorganizations in Pulmonary Surfactant Films: What Monolayer Compression Isotherms Do Not Say

The interaction of nanoparticles (NPs) with pulmonary surfactant is important for understanding the potential adverse effects of inhaled engineered and incidental nanomaterials. The effects of a low concentration (0.001 wt %) of charged, hydrophilic silica NPs of hydrodynamic diameter of ~20 nm on the phase behavior and lateral structure of lipid-only and naturally derived surfactant monolayers were investigated at the air/water interface using surface pressure–area isotherms and Brewster angle microscopy, respectively. Atomic force microscopy was used to image the morphology of films transferred onto mica substrate with nanometer resolution. We show herein that the silica NPs can significantly alter the condensed domain size and shape even in the absence of apparent differences in the monolayer compression isotherms. The cationic particles notably induce structural and morphological progressions in a binary model containing anionic phosphoglycerol that are similar to those observed for the natural surfactant film that contains cationic proteins. These findings specifically highlight the impact of the NP charge on the phase transformations in pulmonary surfactant, with implications for the engineering of nanomaterials for commercial use and bioapplications.

membrane organization↗
DOE OSTI2024

Virtual Substrates for Wide Bandgap AlyX1-yN Growth

Lattice-matched substrates are critical for growth of high quality, compositionally-targeted ternary AlyX1-yN compounds with properties suitable for a wide variety of next-generation opto- and power electronic applications. [DOI:10.1149/2.0111702jss] We have identified the (111) plane of transition metal carbides and nitrides as lattice matched "virtual" substrate layers that have additional benefits of electrical conductivity and appropriate coefficients of thermal expansion for nitride layer at both growth and operating temperatures. [arXiv:2208.11769 2022] In this work, (111)-oriented TaC and ZrN are grown by RF sputtering and optimized as substrate layers for AlyGa1-yN and AlyGd1-yN, respectively. TaC is demonstrated as a full proof of concept. (111)-stabilized TaC layers with a rock-salt crystal structure are annealed to improve surface crystal quality and surface morphology and then used as a template for growth of an Al0.7Ga0.3N layer by molecular beam epitaxy. X-ray diffraction (XRD) demonstrates epitaxial registry of the grown layer to the substrate. High resolution transmission electron microscopy (TEM) is used to investigate interface behavior, showing regions of abrupt interface transitions and nitrogen polar termination of the Al0.7Ga0.3N. We also grew (111)-oriented ZrN on Ti-Zr-N graded buffer layers as a lattice-matched virtual substrate for AlyGd1-yN. Structure, morphology, and strain are analyzed using XRD and atomic force microscopy. Structure and quality of initial Al0.8Gd0.2N thin films are investigated for both in-situ and ex-situ growths.

AlyX1-yN↗
DOE OSTI2023

Degradation Effects at the Porous Transport Layer/Catalyst Layer Interface in Polymer Electrolyte Membrane Water Electrolyzer

The porous transport layer (PTL)/catalyst layer (CL) interface plays a crucial role in the achievement of high performance and efficiency in polymer electrolyte membrane water electrolyzers (PEMWEs). This study investigated the effects of the PTL/CL interface on the degradation of membrane electrode assemblies (MEAs) during a 4000 h test, comparing the MEAs assembled with uncoated and Ir-coated Ti PTLs. Our results show that compared to an uncoated PTL/CL interface, an optimized interface formed when using a platinum group metal (PGM) coating, i.e., an iridium layer at the PTL/CL interface, and reduced the degradation of the MEA. The agglomeration and formation of voids and cracks could be found for both MEAs after the long-term test, but the incorporation of an Ir coating on the PTL did not affect the morphology change or oxidation of IrO x in the catalyst layer. In addition, our studies suggest that the ionomer loss and restructuring of the anodic MEA can also be reduced by Ir coating of the PTL/CL interface. Optimization of the PTL/CL interface improves the performance and durability of a PEMWE.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

A Perspective into Operando Methods for Probing Catalytic Interfaces

Rational design of electrocatalysts for (photo)electrochemical (PEC) processes like hydrogen and oxygen evolution and CO2 reduction reactions is aided by the recent improvements in capabilities of operando measurements, where morphology, composition, and/or function are probed during active catalysis. Through operando microscopy and spectroscopy, structure, catalytic microenvironment, oxidation state, adsorbates, and products can be measured to gain a better understanding of catalyst behavior and suggest possible improvements. Visualizing evolving catalyst morphologies, surface compositions, and electrochemical behavior also helps address many fundamental research questions for a better understanding of catalytic mechanisms. Correlating morphology with chemical identity or functional behavior using a variety of innovative microscopy methods is particularly promising for guiding development of next generation catalysts, and there are also many recent examples of using AI and robotics tools to innovate and speed development. In this Perspective, advances made over the past few years in operando imaging of catalysts relevant to solar fuels will be explored, followed by an outlook on technological developments in instrumentation, sample design, and computational power that may be applied to this field.

Catalysts↗
DOE OSTI2024

A Self-Healing, Flowable, Yet Solid Electrolyte Suppresses Li-Metal Morphological Instabilities

In this article, lithium metal (Li 0 ) solid-state batteries encounter implementation challenges due to dendrite formation, side reactions, and movement of the electrode–electrolyte interface in cycling. Notably, voids and cracks formed during battery fabrication/operation are hot spots for failure. Here, a self-healing, flowable yet solid electrolyte composed of mobile ceramic crystals embedded in a reconfigurable polymer network is reported. This electrolyte can auto-repair voids and cracks through a two-step self-healing process that occurs at a fast rate of 5.6 µm h -1 . A dynamical phase diagram is generated, showing the material can switch between liquid and solid forms in response to external strain rates. The flowability of the electrolyte allows it to accommodate the electrode volume change during Li 0 stripping. Simultaneously, the electrolyte maintains a solid form with high tensile strength (0.28 MPa), facilitating the regulation of mossy Li 0 deposition. The chemistries and kinetics are studied by operando synchrotron X-ray and in situ transmission electron microscopy (TEM). Solid-state NMR reveals a dual-phase ion conduction pathway and rapid Li + diffusion through the stable polymer-ceramic interphase. This designed electrolyte exhibits extended cycling life in Li 0 –Li 0 cells, reaching 12 000 h at 0.2 mA cm -2 and 5000 h at 0.5 mA cm -2 . Furthermore, owing to its high critical current density of 9 mA cm -2 , the Li 0 –LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) full cell demonstrates stable cycling at 5 mA cm -2 for 1100 cycles, retaining 88% of its capacity, even under near-zero stack pressure conditions.

25 ENERGY STORAGE↗
DOE OSTI2018

Engineering the Kinetics of Directed Self-Assembly of Block Copolymers toward Fast and Defect-Free Assembly

Directed self-assembly (DSA) of block copolymers (BCPs) can achieve perfectly aligned structures at thermodynamic equilibrium, but the self-assembling morphology can become kinetically trapped in defective states. Understanding and optimizing the kinetic pathway toward domain alignment is crucial for enhancing process throughput and lowering defectivity to levels required for semiconductor manufacturing, but there is a dearth of experimental, three-dimensional studies of the kinetic pathways in DSA. Here, we combined arrested annealing and TEM tomography to probe the kinetics and structural evolution in the chemoepitaxy DSA of PS-b-PMMA with density multiplication. During the initial stages of annealing, BCP domains developed independently at first, with aligned structures at the template interface and randomly oriented domains at the top surface. As the grains coarsened, the assembly became cooperative throughout the film thickness, and a metastable stitch morphology was formed, representing a kinetic barrier. The stitch morphology had a three-dimensional structure consisting of both perpendicular and parallel lamellae. On the basis of the mechanistic information, we studied the effect of key design parameters on the kinetics and evolution of structures in DSA. Three types of structural evolutions were observed at different film thicknesses: (1) immediate alignment and fast assembly when thickness 1.64L(0). We found that the DSA kinetics can be significantly improved by avoiding the formation of the metastable stitch morphology. Increasing template topography also enhanced the kinetics by increasing the PMMA guiding surface area. A combination of 0.75L(0) BCP thickness and 0.50L(0) template topography achieved perfect alignment over 100 times faster than the baseline process. This research demonstrates that an improved understanding of the evolution of structures during DSA can significantly improve the DSA process.

Ren, Jiaxing↗
DOE OSTI2026

Shining a Light on Some Fundamental Research Opportunities in Semiconductor Photoelectrochemistry

Decades of research in semiconductor photoelectrochemistry have yielded a deep understanding of charge transfer, energetics, and stability at solid−liquid interfaces. Theoretical frameworks developed by Gerischer and contemporaries, together with extensive experimental validation, have clarified the key principles affecting the interfacial kinetics and energetics of semiconductor photoelectrodes. Nevertheless, significant opportunities remain for advances in fundamental understanding of semiconductor photoelectrochemistry. Exciting opportunities include exploiting advances in theory, synthesis, and instrumentation to determine the chemical identity and reactivity of surface states; exerting control of band-edge energetics through molecular-level surface modification processes; and systematically improving emerging photoelectrode protection strategies to enable long-term photoelectrode operation under both oxidative and reductive conditions. Advanced morphologies, such as nanowire and microwire arrays, present new pathways to combine efficient light absorption with effective charge collection and catalyst integration. Unique light−matter interactions during photoelectrochemical deposition of p-type semiconductors readily allow preparation at scale of complex 3D morphologies that are difficult, if not impossible, to access by other methods. Continued exploration of these avenues will expand the fundamental understanding of semiconductor−liquid interfaces and could additionally advance the realization of efficient, stable, and scalable systems for solar fuel generation and other emerging photoelectrochemical applications.

Bean, Paul J. L. [California Institute of Technolo↗
DOE OSTI2021

Interfacial engineering of lithium-polymer batteries with in situ UV cross-linking

Developing promising solid-state Li batteries with capabilities of high current densities have been a major challenge partly due to large interfacial resistance across the electrode/electrolyte interfaces. This work represents an integrated network of self-standing polymer electrolyte and active electrode materials with in situ UV cross-linking. This method provides a uniform morphology of composite polymer electrolyte with low thickness of 20–40 μm. This modification leads to promising cycling results with 85% specific capacity retention in Li||LiFePO4 cell over 100 cycles at high current densities of 170 mA g -1 (~25 μA cm -2 , 1 C). By applying this method, the interfacial resistance decreases as high as seven folds compared to noncross-linked interfaces. The following work introduce a facile and cost-effective method in developing fast-charging self-standing polymer batteries with enhanced electrochemical properties.

25 ENERGY STORAGE↗
DOE OSTI2021

Ultrahigh-Rate and Long-Life Zinc–Metal Anodes Enabled by Self-Accelerated Cation Migration

Aqueous zinc ion batteries are receiving unprecedented attention owing to their markedly high safety and sustainability, yet their lifespan particularly at high rates is largely limited by the poor reversibility of zinc (Zn) metal anodes, due to the random ion diffusion and sluggish ion replenishment at reaction interface. In this work, we propose a tunnel-rich and corona-poled ferroelectric thin film coating for Zn metal anode to tackle above conundra. It is demonstrated that the poled ferroelectric coating can better deconcentrate and self-accelerate ion migration at coating/Zn interface upon electroplating process than untreated ferroelectric coating and bare Zn, thus enabling a compact and horizontally-aligned Zn morphology even at ultrahigh rates. Notably, a maximal cumulative plating capacity of over 6500 mAh cm -2 (at 10 mA cm -2 ) is achieved for the surface-modified Zn metal anode, showing extraordinary reversibility of Zn plating/stripping. This work provides new insights in stabilizing Zn metal electrodeposition at the scale of interfacial ion diffusion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

The role of interfacial donor–acceptor percolation in efficient and stable all-polymer solar cells

Polymerization of Y6-type acceptor molecules leads to bulk-heterojunction organic solar cells with both high power-conversion efficiency and device stability, but the underlying mechanism remains unclear. Here we show that the exciton recombination dynamics of polymerized Y6-type acceptors (Y6-PAs) strongly depends on the degree of aggregation. While the fast exciton recombination rate in aggregated Y6-PA competes with electron-hole separation at the donor–acceptor (D–A) interface, the much-suppressed exciton recombination rate in dispersed Y6-PA is sufficient to allow efficient free charge generation. Indeed, our experimental results and theoretical simulations reveal that Y6-PAs have larger miscibility with the donor polymer than Y6-type small molecular acceptors, leading to D–A percolation that effectively prevents the formation of Y6-PA aggregates at the interface. Besides enabling high charge generation efficiency, the interfacial D–A percolation also improves the thermodynamic stability of the blend morphology, as evident by the reduced device “burn-in” loss upon solar illumination.

14 SOLAR ENERGY↗
DOE OSTI2020

Hydration structure and water exchange kinetics at xenotime–water interfaces: implications for rare earth minerals separation

Hydration of surface ions gives rise to structural heterogeneity and variable exchange kinetics of water at complex mineral–water interfaces. In this work, we employ ab initio molecular dynamics (AIMD) simulations and water adsorption calorimetry to examine the aqueous interfaces of xenotime, a phosphate mineral that contains predominantly Y 3+ and heavy rare earth elements. Consistent with natural crystal morphology, xenotime is predicted to have a tetragonal prismatic shape, dominated by the {100} surface. Hydration of this surface induces multilayer interfacial water structures with distinct OH orientations, which agrees with recent crystal truncation rod measurements. The exchange kinetics between two adjacent water layers exhibits a wide range of underlying timescales (5–180 picoseconds), dictated by ion–water electrostatics. Adsorption of a bidentate hydroxamate ligand reveals that {100} xenotime surface can only accommodate monodentate coordination with water exchange kinetics strongly depending on specific ligand orientation, prompting us to reconsider traditional strategies for selective separation of rare-earth minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Suppressing metal corrosion through identification of optimal crystallographic plane for Zn batteries

Direct use of metals as battery anodes could significantly boost the energy density, but suffers from limited cycling. To make the batteries more sustainable, one strategy is mitigating the propensity for metals to form random morphology during plating through orientation regulation, e.g., hexagonal Zn platelets locked horizontally by epitaxial electrodeposition or vertically aligned through Zn/electrolyte interface modulation. Current strategies center around obtaining (002) faceted deposition due to its minimum surface energy. Here, benefiting from the capability of preparing a library of faceted monocrystalline Zn anodes and controlling the orientation of Zn platelet deposits, we challenge this conventional belief. We show that while monocrystalline (002) faceted Zn electrode with horizontal epitaxy indeed promises the highest critical current density, the (100) faceted electrode with vertically aligned deposits is the most important one in suppressing Zn metal corrosion and promising the best reversibility. Such uniqueness results from the lowest electrochemical surface area of (100) faceted electrode, which intrinsically builds upon the surface atom diffusion barrier and the orientation of the pallets. These new findings based on monocrystalline anodes advance the fundamental understanding of electrodeposition process for sustainable metal batteries and provide a paradigm to explore the processing–structure–property relationships of metal electrodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Experimental and Computational Studies of Stress Corrosion Cracking of Alloys 308/309 and 82/182 Weldments in Corrosive and Radiation Environment

The goal of the project was to determine factors that influence SCC and IASCC in weldments found in LWR nuclear power plants. We focused on a SA508-304L SS weldment fabricated by EPRI using gas tungsten arc welding and used an aggressive BWR normal water chemistry (NWC) immersion environment. This weldment used 309L butter and 308L groove filler material. The microstructure of the 309L butter was non-uniform, exhibiting a 20–30μm thick martensitic layer closest to the SA508 interface, a 1–4 mm thick single γ austenite phase dilution zone, and a γ–δ duplex region extending to the 308L groove filler. The 308L groove filler had an entirely γ–δ duplex microstructure. Two approximately 1-inch thick 304L and SA508 plates approximately 12 by 6 square inches were joined using standard nuclear grade welding techniques. This included a post weld heat treatment of the 309L butter after application, a 0.32 cm fit-up root opening, and 57 bead lines of 308L groove filler applied in 18 layers. A 60 degree weld bevel angle was used and the 309L butter was 1.5 cm thick. Displacement cascade damage was induced using proton irradiation at the Michigan Ion Beam Laboratory. The incident proton energy was 2 MeV, the sample temperature was 360 ºC, and the calculated dpa value at 10 μm (60% of the Bragg peak depth of ~18 μm) was 5 dpa using the quick Kinchin-Pease model. Proton irradiation to this damage level required approximately 125 hours of beam time. Two types of samples were irradiated, tensile specimens and TEM bars. Samples were selected from all regions of the weldment, including the SA508-309L butter interface, the 309L-308L interface, and 308L-304L interface. The stainless steel alloys (304L, 308L, and 309L) within the heat affected zone are characterized by a duplex skeletal morphology of δ-ferrite and γ-austenite resulting from the recrystallization associated with weld fabrication. Approximately 7 to 8 mm of length along the specimen was irradiated. The gauge volume surfaces were mechanically polished and then electro-polished to remove mechanical damage from the mechanical polishing step prior to irradiation. Immersion tests were performed in a recirculating autoclave under BWR NWC conditions (2000 ppb wt. dissolved oxygen, neutral pH, 288 ºC, 10 MPa, and inlet water conductivity <100 nS/cm) to accelerate corrosion. Constant strain rate tests were performed either to failure or to approximately 5% strain. Strain rates of 10 -7 to 10 -6 mm/mm/s were used and typical immersion testing required four to six weeks to achieve failure or strains near 5%. Analysis primarily used advanced electron microscopy techniques of FIB lift out specimens.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2009

Quantifying Therapeutic and Diagnostic Efficacy in 2D Microvascular Images

VESGEN is a newly automated, user-interactive program that maps and quantifies the effects of vascular therapeutics and regulators on microvascular form and function. VESGEN analyzes two-dimensional, black and white vascular images by measuring important vessel morphology parameters. This software guides the user through each required step of the analysis process via a concise graphical user interface (GUI). Primary applications of the VESGEN code are 2D vascular images acquired as clinical diagnostic images of the human retina and as experimental studies of the effects of vascular regulators and therapeutics on vessel remodeling.

Parsons-Wingerter, Patricia↗
NASA NTRSDate not supplied

Testing of a Multi-Stringer Post-Buckled Panel with Incremental Damage Detection

A multi-stringer panel was designed and tested to produce a failure mode of skin-stiffener delamination due to compression loading of a post-buckled skin to support the validation of high-fidelity progressive damage failure analysis modeling. The test procedure included multiple methods of data acquisition ranging from multiple strain gages, front and back digital image correlation, passive thermography, acoustic emission, and ultrasonic inspection to capture key events and damage progression prior to catastrophic failure. Detailed data showing the initial stiffness, onset of skin buckling, buckled mode shape, damage initiation load, damage propagation morphology, and peak load was captured. Two panel configurations were tested. The first had a Teflon insert placed in the interface between the skin and the stiffener flanges adjacent to the center skin bay. The second was subjected to impact damage to the skin-stiffener flange. In each case, continuously-loaded-to-failure tests were conducted first with passive thermography being used exclusively to determine key damage events. Then, incrementally loaded tests were completed where ultrasonic inspections were conducted between each increment. The amount of load applied between each increment was determined based on the in-situ damage detection provided by the passive thermography system. The results of the testing showed a complex delamination growth pattern which migrated between ply interfaces through matrix splits in the upper skin ply of the panel. The result of the testing produced very detailed data which will prove to be useful for validation of delamination growth and migration predictions from progressive damage failure analysis methods.

Jason Action↗
DOE OSTI2024

PRODUCTION OF GLASS-TO-METAL SEALS USING ADDITIVE MANUFACTURING TECHNIQUES

Glass-to-metal (GtM) seals are hermetic barriers between glass and metal components, often used in the electronic and vacuum industries. Creating the seals traditionally requires heating all the components to the glass melting temperature, where the glass will flow and bond to the metal. Due to the manufacturing constraints of the individual components and sealing conditions there are geometric and material restrictions. Additive manufacturing techniques were used to make GtM seals to reduce these restrictions. Hermetic, single pin seals were produced using printed metal shells, by selective laser melting (SLM), and digital light processing (DLP) printed glass preforms. Glass preforms were printed with photosensitive resin mixed with a silicate sealing glass powder in a 1:2 weight ratio. Thermal analysis, TGA/DSC, and screening experiments were used to determine an organic removal schedule. Video techniques determined a sintering schedule by producing a densification curve at different isothermal holds which were fit with a viscous sintering model. Single pin seals were also produced use a laser assisted manufacturing (LAM) process as an alternative to the conventional furnace sealing process. A Nd:YAG laser was focused on a solid glass preform, heating the glass to form the glass-metal bond. The sealing glass was doped with a transition metal oxide, Fe2O3 or CuO, to increase absorption of the laser wavelength. The interface of hermetic LAM seals were analyzed using electron microscopy, compared to conventional prepared seals, finding a reduction of interfacial morphologies.

Read, Aaron Reece↗
DOE OSTI2024

Thermodynamic Analysis of Silk Fibroin–Graphite Hybrid Materials and Their Morphology

Silk fibroin (SF) is a β-sheet-rich protein that is responsible for the remarkable tensile strength of silk. In addition to its mechanical properties, SF is biocompatible and biodegradable, making it an attractive candidate for use in biotic/abiotic hybrid materials. A pairing of particular interest is the use of SF with graphene-based nanomaterials (GBNs). The properties of this interface drive the formation of well-ordered nanostructures and can improve the electronic properties of the resulting hybrid. It was previously demonstrated that SF can form lamellar nanostructures in the presence of graphite; however, the equilibrium morphology and associated driving interactions are not fully understood. Here, in this study, we characterize these interactions between SF and SF lamellar with graphite using molecular dynamics (MD) simulations and umbrella sampling (US). We find that SF lamellar nanostructures have strong orientational and spatial preferences on graphite that are driven by the hydrophobic effect, destabilizing solvent–protein interactions and stabilizing protein–protein and protein–graphite interactions. Finally, we show how careful consideration of these underlying interactions can be applied to rationally modify the nanostructure morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗