Search NASA⌕ Search

SEARCH · Search NASA

Results for “laser simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Calculation of the spectrum of whispering gallery modes in cylindrical resonators with perturbed boundary conditions

The spectrum of whispering gallery modes for resonators with a small deformation of the boundary is calculated analytically. Cylindrical resonators with two different cross sections (segment close to a circle and segment close to a semicircle) are considered. The calculation is performed for resonators with metal boundaries, but the obtained result is a good approximation for dielectric resonators as well. The applicability limits of the found expressions for the spectra are analysed. It is shown that the spectra calculated using the obtained expressions coincide well with computer-calculated spectra. The perturbation-induces changes in the field distribution are qualitatively studied using numerical simulation. (semiconductor lasers. physics and technology)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New regime of single-pulse lasing in fibre lasers with mode locking by nonlinear polarisation evolution

A new lasing regime has been obtained experimentally and as a result of numerical simulation of fibre lasers with mode locking by nonlinear polarisation evolution. This regime differs radically from the previously known regimes of stable single-pulse lasing and generation of wave packets with quasi-stochastic filling. The spectral and temporal features of the pulses generated in the new regime, as well as the possibilities of pulse compression, have been investigated. Simple criteria are formulated, which make it possible to identify rapidly the new lasing regime in experiment. (optical fibres, lasers and amplifiers. properties and applications)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Positive streamer formation in cathode region of pulsed high-pressure discharges for transversely excited atmosphere laser applications

A two-dimensional model of a high-pressure cathode region with nonuniform secondary electron emission has been used for conditions close to those used in pulsed discharge XeCl lasers. To simulate processes leading to a cathode spot formation, an inhomogeneity in the cathode electron emission was introduced by varying the electron emission in a 100 {mu}m-radius cathode surface region. The results obtained indicate that the inhomogeneous cathode emission can induce an instability in the cathode-faced surface of the bulk discharge plasma leading to the development of a cathode-directed streamer inside of the cathode region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser-seeded modulation instability within LHC proton beams

A new method for seeding the modulation instability (MI) within an SPS-LHC proton beam using a laser pulse is presented. Using simulations, we show that a laser pulse placed ahead of a proton beam excites axially symmetric selfmodulation modes within the proton beam and leads to peak accelerating fields that are comparable to previously proposed seeding methods.

43 PARTICLE ACCELERATORS↗

Numerical 1D PIC-simulations of ion acceleration during laser-plasma interaction: Optimization of a two-component multilayered target structure

Ion beam acceleration is simulated using a one-dimensional 1D2P PIC code. The dependences of the maximum energy and width of the energy spectrum of the generated ion beams on the duration and intensity of laser radiation, as well as on the target parameters (thickness and number of layers, types and densities of atoms), are investigated. The optimal target configuration at which the energy of the accelerated ions is maximum (5-160 MeV for intensities of 5 x 10{sup 18-5} x 10{sup 20} W/cm{sup 2}) is found. The optimal target configuration is shown to depend on the intensity and be independent of the laser pulse duration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantum-mechanical calculations of residual current density excited during gas ionisation by an intense two-colour laser pulse

By solving analytically and numerically the three-dimensional time-dependent Schrödinger equation, we have studied the excitation of a residual current density during gas ionisation by a two-colour laser pulse containing a field at the fundamental frequency and an additional field at the doubled frequency. We have found the dependences of the residual current density on the phase shift between the components of the field and on the intensity of the fundamental harmonic. It is shown that the strong-field approximation taking into account the interaction of freed electrons with the parent ion yields a good quantitative agreement with the results of direct numerical simulation. (extreme laser radiation: physics and fundamental applications)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fiber-coupled laser-driven flyer plates system

A system for the launch of hypervelocity flyer plates has been developed and characterized. Laser-driven flyers were launched from the substrate backed aluminum-alumina-aluminum sandwiched films. A laser-induced plasma is used to drive flyers with typical thickness of 5.5 {mu}m and diameters of less than 1 mm, to achieve velocities of a few km/s. These flyer plates have many applications, from micrometeorite simulation to laser ignition. The flyer plates considered here have up to three layers: an ablation layer, to form plasma; an insulating layer; and a final, thicker layer that forms the final flyer plates. This technique was developed aiming at improving the energy efficiency of the system. The kinetic energy of flyers launched with the additional layer was found to be enhanced by a factor of near 2 (up to 30%). The optical fiber delivery system governs the output spatial profile of the laser spot and power capacity. Moreover, a technique for coupling high-power laser pulses into an optical fiber has been developed. This fiber optic system has been successfully used to launch flyer plates, and the surface finishing quality of the fiber was found to be an important factor. Importantly, measurements of the flyer performance including the mean velocities and planarity were made by an optical time-of-arrival technique using an optical fiber array probe, demonstrating the good planarity of the flyer and the achievable average velocity of 1.7 km/s with approaching 1 mm diameter. Finally, the relationship between flyer velocities and incident laser pulses energy was also investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sodium tracer measurements of an expanded dense aluminum plasma from e-beam isochoric heating

Spatially and temporally resolved visible absorption spectroscopy is performed on sodium D-lines present as surface contaminants on an expanded dense aluminum plasma plume. An 80-ns FWHM, intense, relativistic electron beam deposits 5.4 J into a 100- μ m-thick Al foil, which isochorically heats and subsequently hydrodynamically expands the material through the warm dense matter state and into a classical-like plasma state, with a coupling parameter of approximately 0.2 and a degeneracy parameter of approximately 270. The Na contamination, carried along with the expanding plume, shows saturated absorption features in the dense Al continuum for λ > 450 nm. X-ray photoelectron spectroscopy and laser-induced breakdown spectroscopy confirm Na is a surface contaminant with an atomic concentration of ~ 0.1 % when interrogating identical foil samples. Additioanlly, a spectroscopic-quality radiation transport model is used to post-process 2D hydrodynamic simulations to interpret the plasma conditions based on the measured Na 3p-3s doublet line profiles. A sodium number density of 3 × 10 15 cm -3 best matches the experimental spectra, which originate from a dense surface plasma with n e = 3.0 ± 0.8 × 10 18 cm -3 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser-plasma interactions with a Fourier-Bessel particle-in-cell method

A new spectral particle-in-cell (PIC) method for plasma modeling is presented and discussed. In the proposed scheme, the Fourier-Bessel transform is used to translate the Maxwell equations to the quasi-cylindrical spectral domain. In this domain, the equations are solved analytically in time, and the spatial derivatives are approximated with high accuracy. In contrast to the finite-difference time domain (FDTD) methods, that are used commonly in PIC, the developed method does not produce numerical dispersion and does not involve grid staggering for the electric and magnetic fields. These features are especially valuable in modeling the wakefield acceleration of particles in plasmas. The proposed algorithm is implemented in the code PLARES-PIC, and the test simulations of laser plasma interactions are compared to the ones done with the quasi-cylindrical FDTD PIC code CALDER-CIRC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Solidification structures on carbon materials surface-melted by repetitive laser pulses

The solidification morphology of carbon materials surface-melted by laser radiation at atmospheric pressure is studied. Electron microscopy results indicate that melt solidification is accompanied by the formation of surface microstructures, presumably due to the Rayleigh-Taylor instability in the molten carbon. The instability increment and surface tension coefficient of molten carbon are estimated, and the penetration of carbon vapour into the melt during one laser pulse is examined using numerical simulation. (interaction of laser radiation with matter. laser plasma)

36 MATERIALS SCIENCE↗

Dissipative and non-dissipative solitons in the SRS- backscattering of laser radiation in underdense plasma

The process of stimulated Raman backscattering of laser pulse in underdense plasma is considered self-consistently in 1D model. Solutions to this problem in the form of backward-propagating bright solitons (the Stokes scattered pulse and the plasma density wave) coupled with the dark soliton in the pump laser pulse are found. These solitary solutions exist both in the non-dissipative (non-collisional plasma) case and in the dissipative (collisional plasma) case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation studies of the interaction of laser radiation with additively manufactured foams

The interaction of laser radiation with foams of various porosities and low densities has been the subject of several numerical and experimental studies. In all cases, the modeling of low-Z under-dense foams as uniform gases of equivalent average density using standard radiation-hydrodynamics codes has resulted in heat-front velocities that are considerably faster than those observed experimentally. It has been theoretically conjectured that this difference may be attributed to the breakdown of the foam’s morphology, leading to a dynamics of filament expansion where the ion and electron energy partitions are significantly different from those calculated using the uniform gas model. We found that 3D computer simulations employing a disconnected representation of the foam’s microstructure which allowed for the dynamics of foam element heating, expansion, and stagnation largely supported the theoretical picture. Simulations using this model for laser experiments on under-dense 2 mg cc -1 SiO 2 aerogel foams reproduced the experimental data fairly well. We used the validated model in simulations of low-density structured foam-like materials (produced via additive manufacturing) with a variety of morphologies. We found that the log-pile configurations were consistent with the analytical propagation model of Gus’kov et al. Further validation of the model was obtained by simulating experiments performed at the Jupiter Laser Facility using the log-pile and octet-truss foam morphologies. Simulations of the foam-laser interaction using a wave propagation code showed that the microstructure was able to enhance stimulated Brillouin scattering (SBS) by concentrating the light energy into density holes. In turn, this promotes laser filamentation, reducing SBS and bringing the predicted values closer to the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical simulation of a high efficiency combustion-driven HF laser with preheated fuels

We report a simulation calculation of the processes proceeding in a nozzle array and an optical cavity of a combustion-driven cw HF chemical laser with preheated fuels. Investigation results demonstrate that fuel preheating can dramatically improve the output characteristics of combustion-driven HF chemical lasers. The available output power and specific output power are improved by ∼13% and ∼46%, respectively, when fuels are preheated to 1200 K. It is shown that the fuel consumption in the combustor is reduced by ∼36%, which allows one to improve the performance of combustion-driven HF lasers and make them more compact due to fuel preheating. (paper)

42 ENGINEERING↗

Laboratory tests of laser control of electron beams for future colliders

Laser-driven Compton backscattering (CBS) has been proposed as method for controlling the intensity of colliding bunches in the FCC-ee so as to avoid the flip-flop instability caused by intensity asymmetry in colliding bunches. Laser-based collimation has also been proposed as an indestructible collimator for high-intensity electron beams. We have initiated a laboratory-based test program of these concepts with the E344 experiment at FACET-II. In this paper, we describe simulations of laser–beam interactions at FACET-II and the relevant scaling for FCC-ee. We also describe the experimental setup and diagnostics that will be used to make the measurements at FACET-II.

accelerator physics↗

Fast-ignition transport studies: Realistic electron source, integrated particle-in-cell and hydrodynamic modeling, imposed magnetic fields

Transport modeling of idealized, cone-guided fast ignition targets indicates the severe challenge posed by fast-electron source divergence. The hybrid particle-in-cell (PIC) code Zuma is run in tandem with the radiation-hydrodynamics code Hydra to model fast-electron propagation, fuel heating, and thermonuclear burn. The fast electron source is based on a 3D explicit-PIC laser-plasma simulation with the PSC code. This shows a quasi two-temperature energy spectrum and a divergent angle spectrum (average velocity-space polar angle of 52 Degree-Sign ). Transport simulations with the PIC-based divergence do not ignite for >1 MJ of fast-electron energy, for a modest (70 {mu}m) standoff distance from fast-electron injection to the dense fuel. However, artificially collimating the source gives an ignition energy of 132 kJ. To mitigate the divergence, we consider imposed axial magnetic fields. Uniform fields {approx}50 MG are sufficient to recover the artificially collimated ignition energy. Experiments at the Omega laser facility have generated fields of this magnitude by imploding a capsule in seed fields of 50-100 kG. Such imploded fields will likely be more compressed in the transport region than in the laser absorption region. When fast electrons encounter increasing field strength, magnetic mirroring can reflect a substantial fraction of them and reduce coupling to the fuel. A hollow magnetic pipe, which peaks at a finite radius, is presented as one field configuration which circumvents mirroring.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Phase noise of dispersion-managed solitons

We quantify noise-induced phase deviations of dispersion-managed solitons (DMS) in optical fiber communications and femtosecond lasers. We first develop a perturbation theory for the dispersion-managed nonlinear Schroedinger equation (DMNLSE) in order to compute the noise-induced mean and variance of the soliton parameters. We then use the analytical results to guide importance-sampled Monte Carlo simulations of the noise-driven DMNLSE. Comparison of these results with those from the original unaveraged governing equations confirms the validity of the DMNLSE as a model for many dispersion-managed systems and quantify the increased robustness of DMS with respect to noise-induced phase jitter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coherent lidar design and performance verification

The verification of LAWS beam alignment in space can be achieved by a measurement of heterodyne efficiency using the surface return. The crucial element is a direct detection signal that can be identified for each surface return. This should be satisfied for LAWS but will not be satisfied for descoped LAWS. The performance of algorithms for velocity estimation can be described with two basic parameters: the number of coherently detected photo-electrons per estimate and the number of independent signal samples per estimate. The average error of spectral domain velocity estimation algorithms are bounded by a new periodogram Cramer-Rao Bound. Comparison of the periodogram CRB with the exact CRB indicates a factor of two improvement in velocity accuracy is possible using non-spectral domain estimators. This improvement has been demonstrated with a maximum-likelihood estimator. The comparison of velocity estimation algorithms for 2 and 10 micron coherent lidar was performed by assuming all the system design parameters are fixed and the signal statistics are dominated by a 1 m/s rms wind fluctuation over the range gate. The beam alignment requirements for 2 micron are much more severe than for a 10 micron lidar. The effects of the random backscattered field on estimating the alignment error is a major problem for space based lidar operation, especially if the heterodyne efficiency cannot be estimated. For LAWS, the biggest science payoff would result from a short transmitted pulse, on the order of 0.5 microseconds instead of 3 microseconds. The numerically errors for simulation of laser propagation in the atmosphere have been determined as a joint project with the University of California, San Diego. Useful scaling laws were obtained for Kolmogorov atmospheric refractive turbulence and an atmospheric refractive turbulence characterized with an inner scale. This permits verification of the simulation procedure which is essential for the evaluation of the effects of refractive turbulence on coherent Doppler lidar systems. The analysis of 2 micron Doppler lidar data from Coherent Technologies, Inc. (CTI) has demonstrated many of the advantages of doppler lidar measurements of boundary layer winds. The effects of wind shear and wind turbulence over the pulse volume are probably the dominant source of the reduced performance. The effects of wind shear and wind turbulence on the statistical description of doppler lidar data has been derived and calculated.

Frehlich, Rod↗