Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Feedback stabilization and control of linear neutral systems

The first problem treated here is the realization and stabilization of linear neutral systems with discrete delays. It is shown that any autonomous linear neutral system with discrete delays is zero-state equivalent to an abstract linear system over a local ring of operators. Using the abstract model, the basic existence question for neutral realization is then settled. For general infinite dimensional linear systems, there is no precise analog of the finite dimensional state space isomorphism theorem. Because of this, the notion of spectral minimality must be introduced. For the case of single input-single output systems, realizations are obtained that are both minimal and spectrally minimal. Using the Cruz-Hale theory of stable D-operators, conditions are given that ensure that any poles introduced into the realization are strictly contained in the left half plane and indeed are characterized as characteristic values of the D-operator. The problem of the feedback stabilization of neutral systems is then considered using the abstract model. It is shown that, for neutral systems with commensurable delays and a stable D-operator in the sense of Cruz and Hale, Morses theorem (1976) on pole assignment over a PID implies stabilizability in the reachable case.

Tarn, T. J.↗

Conduction cooling systems for linear accelerator cavities

A conduction cooling system for linear accelerator cavities. The system conducts heat from the cavities to a refrigeration unit using at least one cavity cooler interconnected with a cooling connector. The cavity cooler and cooling connector are both made from solid material having a very high thermal conductivity of approximately 1.times.10.sup.4 W m.sup.-1 K.sup.-1 at temperatures of approximately 4 degrees K. This allows for very simple and effective conduction of waste heat from the linear accelerator cavities to the cavity cooler, along the cooling connector, and thence to the refrigeration unit.

42 ENGINEERING↗

On the periodic solutions of the Michelson continuous and discontinuous piecewise linear differential system

Applying new results from the averaging theory for continuous and discontinuous differential systems, we study the periodic solutions of two distinct versions of the Michelson differential system: a Michelson continuous piecewise linear differential system and a Michelson discontinuous piecewise linear differential system. The tools here used can be applied to general nonsmooth differential systems.

97 MATHEMATICS AND COMPUTING↗

Canonical forms for nonlinear systems

Necessary and sufficient conditions for transforming a nonlinear system to a controllable linear system have been established, and this theory has been applied to the automatic flight control of aircraft. These transformations show that the nonlinearities in a system are often not intrinsic, but are the result of unfortunate choices of coordinates in both state and control variables. Given a nonlinear system (that may not be transformable to a linear system), we construct a canonical form in which much of the nonlinearity is removed from the system. If a system is not transformable to a linear one, then the obstructions to the transformation are obvious in canonical form. If the system can be transformed (it is called a linear equivalent), then the canonical form is a usual one for a controllable linear system. Thus our theory of canonical forms generalizes the earlier transformation (to linear systems) results. Our canonical form is not unique, except up to solutions of certain partial differential equations we discuss. In fact, the important aspect of this paper is the constructive procedure we introduce to reach the canonical form. As is the case in many areas of mathematics, it is often easier to work with the canonical form than in arbitrary coordinate variables.

Su, R.↗

An identification algorithm for linear stochastic systems with time delays

Linear discrete stochastic control systems containing unknown multiple time delays, plant parameters and noise variances are considered. An algorithm is established which uses the maximum-likelihood technique to identify the unknown parameters. An estimated likelihood function is evaluated based on the previous parameter estimates, which in turn generates a new descent direction vector to update the unknown parameters. The delays and plant parameters are identified in their respective parameter spaces. An example of a second-order stochastic system has been implemented by digital simulation to demonstrate the applicability of the algorithm.

Leondes, C. T.↗

Euclidean controllability of linear delay systems with limited controls

For linear delay systems with limited controls the notion of a proper control system is introduced. If the uncontrolled system x(t) = Ax(t) + Bx(t - h) is uniformly asymptotically stable and the control equation x(t) = Ax(t) + Bx(t-) + Cu(t) is proper, then the control system is Euclidean null-controllable. It is noted that controllability is equivalent to the system being proper for delay systems with unlimited power.

Chukwu, E. N.↗

Krylov subspace recycling for evolving structures

Krylov subspace recycling is a powerful tool when solving a long series of large, sparse linear systems that change only slowly over time. In PDE constrained shape optimization, these series appear naturally, as typically hundreds or thousands of optimization steps are needed with only small changes in the geometry. In this setting, however, applying Krylov subspace recycling can be a difficult task. As the geometry evolves, in general, so does the finite element mesh defined on or representing this geometry, including the numbers of nodes and elements and element connectivity. This is especially the case if re-meshing techniques are used. As a result, the number of algebraic degrees of freedom in the system changes, and in general the linear system matrices resulting from the finite element discretization change size from one optimization step to the next. Changes in the mesh connectivity also lead to structural changes in the matrices. In the case of re-meshing, even if the geometry changes only a little, the corresponding mesh might differ substantially from the previous one. Obviously, this prevents any straightforward mapping of the approximate invariant subspace of the linear system matrix (the focus of recycling in this work) from one optimization step to the next; similar problems arise for other selected subspaces. In this paper, we present an algorithm to map an approximate invariant subspace of the linear system matrix for the previous optimization step to an approximate invariant subspace of the linear system matrix for the current optimization step, for general meshes. This is achieved by exploiting the map from coefficient vectors to finite element functions on the mesh, combined with interpolation or approximation of functions on the finite element mesh. We demonstrate the effectiveness of our approach numerically with several proof of concept studies for a specific meshing technique.

42 ENGINEERING↗

Synthesis of a non-linear feedback system with significant plant-ignorance for prescribed time-domain tolerances

The problem considered is the design of a feedback system containing a linear, time invariant, minimum phase plant, whose parameters are known only within given bounds, such that the time response of the system remains within specified limits. A quasi-optimal design, for given design constraints, is one which minimizes the effect of white sensor noise on the input to the plant. An investigation was conducted on the use of the non linear device known as the Clegg integrator in the design of such a system. The describing function of the Clegg integrator has the same magnitude characteristic, apart from a scale factor, as the linear integrator, but has 52 deg less phase-lag, at all frequencies, than the linear integrator; thus, when used in a feedback system, it provides a larger stability margin than the linear integrator. This property allows the nonlinear feedback system to be designed so that the sensor noise is attenuated more than in the linear design.

Krishnan, K. R.↗

Convolution feedback systems.

Linear time-invariant feedback systems with multiple inputs and multiple outputs are examined. It is demonstrated that no loss of generality takes place considering the feedback to be unity. Necessary and sufficient conditions are derived for the closed-loop impulse response to be stable in a prescribed sense.

Desoer, C. A.↗

Contrast changes in fluoroscopic imaging systems and statistical variations of these changes

Experimental studies have indicated that: (1) The response of digitized fluoroscopic imaging systems is linear systems is linear with contrast over a rather wide range of absorber and cavity thicknesses. (2) Contrast changes associated with the addition of aluminum, iodine containing contrast agents and air of thicknesses 1mm or less can be detected with a 95% confidence level. (3) The standard deviation associated with such determination using clinically available X-ray generators and video disc recording is less than 1 percent. A large flat screen X-ray image intensifier has been constructed and some preliminary results obtained. Sensitivity achieved makes dose reduction a factor often greater than previously reported for a system using a conventional X-ray image intensifier.

Bailey, N. A.↗

Reduced-order modeling on a near-term quantum computer

Quantum computing is an advancing area of research in which computer hardware and algorithms are developed to take advantage of quantum mechanical phenomena. In recent studies, quantum algorithms have shown promise in solving linear systems of equations as well as systems of linear ordinary differential equations (ODEs) and partial differential equations (PDEs). Reducedorder modeling (ROM) algorithms for studying fluid dynamics have shown success in identifying linear operators that can describe flowfields, where dynamic mode decomposition (DMD) is a particularly useful method in which a linear operator is identified from data. In this work, DMD is reformulated as an optimization problem to propagate the state of the linearized dynamical system on a quantum computer. This reformulation was chosen as a means of facilitating implementation on a near-term quantum computer. Quadratic unconstrained binary optimization (QUBO), a technique for optimizing quadratic polynomials in binary variables, allows for quantum annealing algorithms to be applied. A quantum circuit model (quantum approximation optimization algorithm, QAOA) is utilized to obtain predictions of the state trajectories. Results are shown for the quantum-ROM predictions for flow over a 2D cylinder at Re = 220 and flow over a NACA0009 airfoil at Re = 500 and α = 15°. The quantum-ROM predictions are found to depend on the number of bits utilized for a fixed point representation and the truncation level of the DMD model. Comparisons with DMD predictions from a classical computer algorithm are made, as well as an analysis of the computational complexity and prospects for future, more fault-tolerant quantum computers.

97 MATHEMATICS AND COMPUTING↗