SEARCH · Search NASA

Results for “metastable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1984

SPAR X Technical Report for Experiment 76-22 Directional Solidification of Magnetic Composites

The effects of gravity on Bridgman-Stockbarger directional solidification of off-eutectic Bi/MnBi were studied in reduced gravity aboard the SPAR X flight and compared to normal-gravity investigations and previous eutectic Bi/MnBi SPAR flight experiments. The directional solidification of off-eutectic Bi/MnBi results in either a dendritic structure connected with local cooperative growth or a coupled low volume fraction faceted/non faceted aligned rod eutectic whose Mn macrosegregation, MnBi rod size, interrod spacing, and thermal and magnetic properties are sensitive functions of the solidification processing conditions. Two hypoeutectic and two hypereutectic samples were solidified during 605 sec of furnace travel, with an initial 265 sec low-gravity interval. Comparison Earth-gravity samples were solidified in the same furance assembly under identical processing conditions. Macrosegregation in the low-g samples was consistent with a metastable increase in Mn solubility in the Bi matrix, in partial agreement with previous Bi/MnBi SPAR findings of MnBi volume reduction.

Bethin, J.↗

NASA NTRS1984

Transformation toughened ceramics for the heavy duty diesel engine technology program

The objective of this program is to develop an advanced high temperature oxide structural ceramic for application to the heavy duty diesel engine. The approach is to employ transformation toughening by additions of ZrO.5HfO.5O2 solid solution to the oxide ceramics, mullite (2Al2O3S2SiO2) and alumina (Al2O3). The study is planned for three phases, each 12 months in duration. This report covers Phase 1. During this period, processing techniques were developed to incorporate the ZrO.5HfO.5O2 solid solution in the matrices while retaining the necessary metastable tetragonal phase. Modulus of rupture and of elasticity, coefficient of thermal expansion, fracture toughness by indent technique and thermal diffusivity of representative specimens were measured. In Phase 2, the process will be improved to provide higher mechanical strength and to define the techniques for scale up to component size. In Phase 3, full scale component prototypes will be fabri-]cated.

Musikant, S.↗

NASA NTRS1985

Imaging Spectrometric Observatory (ISO)

The imaging spectrometric observatory (ISO) is discussed. The objectives of this instrument are to measure the spectral signatures of a large range of minor constituents, metastable, and excited species of both atomic and molecular ions, and neutrals in the atmosphere (from the stratosphere to the upper thermosphere). The instrument is composed of five identical spectrometers, each restricted to a given spectral range between 20 and 1200 nanometers designed for high speed operation as an imaging device. Each module is an imaging scanning spectrometer with coincident 0.5 x 0.007 degree field of view.

Roberts, W. T.↗

NASA NTRS1985

SU(2) x U(1) vacuum and the Centauro events

It is proposed that the fireballs invoked to explain the Centauro events are bubbles of a metastable superdense state of nuclear matter, created in high energy (E approximately 10 to the 15th power eV) cosmic ray collisions at the top of the atmosphere. If these bubbles are created with a Lorentz factor gamma approximately equals 10 at their CM frame, the objections against the origin of these events in cosmic ray interactions are overcome. A relationship then between their lifetime, tau, and the threshold energy for bubble formation, E sub th, appears to be insensitive to the value of tau and always close to E sub th approximately 10 to 15th power eV. Finally it is speculated that these bubbles might be manifestations of the SU(2) x U(1) false vacuum excited in these collisions. The absence of in the Centauro events is then explained by the decay modes of these excitations.

Kazanas, D.↗

NASA NTRS1985

A preliminary spectroscopic assessment of the Spacelab 1/Shuttle optical environment

Attention is given to the Space Lab/Space Shuttle-borne Imaging Spectrometric Observatory's 1150-8000 A spectral data, which was gathered while this instrument package was looking tangentially away from the earth and into the velocity vector. The spectrum is noted to contain the expected atmospheric features, together with bright molecular bands between 6400 and 8000 A. These bands appear to be part of the N2 First Positive system. If most of the emission is due to this system, two excitation mechanisms are implied: direct collisional excitation of the local Shuttle atmosphere by the terrestrial atmosphere, or alternatively a surface interaction which generates metastable N2(A); this subsequently radiates via inverse first positive N2 transitions, followed by first positive transitions.

Torr, M. R.↗

NASA NTRS1984

Plastic flow of plasma sprayed ceramics

The plastic flow of plasma-sprayed ZrO2-8Y2O3 ceramic has been measured at temperatures up to 1250 C and compared to the plastic flow of pressed and sintered ZrO2-8Y2O3. Plasma spraying of binary oxide ceramics is found to result in a metastable state which is inelastic at high temperature but can also be stabilized or devitrified through heat treating so as to decrease plastic properties. The mechanical properties of the as-plasma sprayed and devitrified ceramic sheet material was measured. An improved algorithm that incorporates the inherently nonlinear thermomechanical field equations was used to determine the influence of inelastic material behavior on the thermomechanical response of ceramic coated seal components. Significant creep was found during the thermal shock and steady heating periods with insufficient time during thermal quench to reverse the process, thereby inducing significant residual stresses into the components.

Padovan, J.↗

NASA NTRS1983

Kinetic modeling of an IBr solar pumped laser

The possibility of using an IBr laser as a solar-energy converter is examined theoretically, and reasons for its choice are given. Broadband absorption results in dissociation with the formation of excited metastable Br atoms, some of which then lase to the ground state Br. The ground state is depopulated by three-body recombination and, more importantly, by exchange reactions which more than compensate for the high quenching in heteronuclear halogen systems. Kinetic modeling indicates lasing is possible in the pulsed mode and possibly in the steady state with a cooled gas flow system. Temperature effects are discussed. The efficiency of the laser approaches 1.2 percent at optical thicknesses large enough for complete absorption of the photons.

Harries, W. L.↗

NASA NTRS1983

Condensation of chondrules

Analysis of current experimental results concerned with the kinetic constraints on chondrule formation showed that the major physical properties of chondrules could have been produced by direct condensation of metastable liquid silicates droplets from a hot gas in the primordial nebula. It is argued that such a condensation process would have to be followed by crystallization, accretion, and partial comminution of the droplets. The chemical mechanisms driving this process are described, including: nucleation constraints on comminution and crystallization; slow transformations and chemical reactions in chain silicates; and the slow diffusion of ions. It is shown that the physical mechanisms for chondrule condensation are applicable to a broad spectrum of chondrule sources.

Blander, M.↗

NASA NTRS1985

IUE observations of Beta Pictoris - An IRAS candidate for a proto-planetary system

The results of a preliminary analysis of high-resolution and low-resolution UV spectra of the edge-on extended-disk shell star Beta Pic, obtained with the IUE SWP and LWR instruments on November 5-6, 1984, are reported and compared with IRAS and ground-based observations. No selective UV extinction is detected, and the fine structure of the Fe II and C I absorption lines and the presence of metastable Fe II lines are considered consistent with a circumstellar nebula or extended envelope of density greater than 1000/cu cm and electron density (1-10) x 10 to the 8th/cu cm or less at 1-2 AU from the central star. The possibility that the extended orbiting disk is clumpy, as observed by Smith and Terrile (1985), is discussed.

Kondo, Y.↗

NASA NTRS1985

Theoretical investigation of the interstellar CH3NC/CH3CN ratio

Calculations have been performed to determine the abundance ratio of the metastable isomer CH3NC to the stable isomer CH3CN in dense interstellar clouds. According to gas phase, ion-molecule treatments, these molecules are both synthesized via protonated ion precursors. A calculation has been made of the ratio of the formation rates of the protonated precursor ions, CH3NCH(+) and CH3CNH(+), synthesized via the radiative association reaction between CH3(+) and HCN, which is thought to be the dominant formation process of the two isomeric ions. The calculations, which involve both ab initio quantum chemistry and equilibrium determinations, lead to a predicted CH3NCH(+)/CH3CNH(+) formation rate ratio between 0.1 and 0.4. If this ratio is maintained in the neutral species formed from the precursor ions, theory predicts a sizable abundance for methyl isocyanide (CH3NC) and lends credence to its tentative observation.

Defrees, D. J.↗

NASA NTRS1985

Extinction coefficient of H2CC(3B2) at 137 nm

In spite of the conduction of numerous studies regarding the vinylidene free radical, its role and importance as a reactive intermediate is not well characterized. Laufer (1980, 1983) has reported the absorption spectrum of metastable H2CC(3B2), the lowest excited state, in the vacuum ultraviolet and has measured several aspects of its quenching properties. The present study provides a measurement of the extinction coefficient of H2CC(3B2). Knowledge of the vinylidene concentration is required to convert readily available absorption data into an extinction coefficient or cross section. In the current work, the H2CC(3B2) concentration was determined in an investigation of the photodissociation of vinyl chloride.

Fahr, A.↗

NASA NTRS1985

The lower electronic states of ClOO - A computational investigation

Eight doublet and eight quartet states of ClOO were investigated by ab initio CI techniques. The potential energy surfaces of the four lowest energy doublet states of both A-double-prime and A-prime symmetry indicate that only the 1 2A-double-prime state is bound. In contrast to the model provided by the HO2 radical, all of the excited doublet states investigated were repulsive with respect to dissociation to Cl + O2 and metastable or bound with respect to dissociation to ClO + O. The transitions to the excited states investigated span the visible and near UV spectral regions, but the transition moments indicate that they are very weak. Since the photolysis products are the same as those of the rapid thermal dissociation, photolysis is not expected to be an important atmospheric process. The soft bending potential for the 1 2A-prime state and the shape of the 1 4A-double-prime state in the entrance channel of the ClO + O yields Cl + O2 reaction provide a qualitative explanation for the underprediction of the low temperature reaction rate by previous trajectory calculations.

Jafri, J. A.↗

NASA NTRS1985

Effect of Undercooling in a Low-Gravity Containerless Environment on the Structure and Properties of Alloys

The 30 meter and 100 meter drop tubes at the Marshall Space Flight Center offer a unique opportunity to study solidification in a containerless, microgravity environment. Samples are melted in a furnace at the top of the drop tube and solidify during a 4.5 second free fall in the 100 meter drop tube or a 2.6 second free fall in the 30 meter drop tube. The cooling rate obtained in the drop tubes is lower than cooling rates in atomization and splat-quenching processes. Decoupling the rapid solidification process allows the study of the effects of undercooling and recalescence on alloy morphologies. The research therefore has a three-fold purpose. The first is examination of the limits of undercooling of niobium and niobium-base alloys in the drop tube. The second purpose is the observation of microstructures resulting from the solidification of samples at large undercoolings and moderate cooling rates. The third purpose is the observation of metastable phase formation in highly undercooled samples.

Bayuzick, R. J.↗

NASA NTRS1985

Effect of Undercooling and Modified Microstructure on the Physical Properties of Material Synthesized in the Drop Tube and Drop Tower

The effects of undercooling and modified microstructure on the physical properties of synthesized materials were investigated. The objectives of this program are: (1) to determine the possible existence of metastable phases and novel physical processes on material prepared in a microgravity environment; and (2) to investigate the feasibility of fabricating advanced electronic devices using material with microstructures obtainable in a microgravity environment. The specific alloys and compounds under study are Au-Ge and immiscible alloys Nb-Ge compounds, and Ga-Bi immiscible alloys, and Ba-Pb-Bi-O. The superconducting and normal state transport properties of the materials under different pressures and in different magnetic fields were determined. The simultaneous study on the physical properties and the microstructure of material will provide information about the potential applications of materials processed in a microgravity environment.

Chu, C. W.↗

NASA NTRS1985

Undercooling, Remelting, and Coarsening

Solidification of metal alloys with initial high undercoolings occurs with rapid recalescence due to rapid heat release of the latent heat of fusion. The recalescence temperature is usually higher than the solidus and/or the thermodynamic T sub o temperature of the alloy, depending on the initial undercooling and alloy composition. The rapid heating during recalescence alters the initially solidified structures, in ways that must include partial remelting, ripening, coarsening, and decomposition of the rapidly solidified primary metastable or supersaturated phases. New ways to study the solidification and remelting phenomena associated with the rapid heating during recalescence of undercooled alloys were developed. The phenomena are studied by using: (1) emulsions of iron and nickel base alloys in viscous liquid carriers; and (2) rapid heating of metal samples by electric discharge, using a technique similar to the exploding wire process (EWP), except with less power input. Experimental results are combined with theoretical analyses to better understand the solidification of levitated metal droplets with high undercooling, which relates to the solidification process.

Flemings, M. C.↗

NASA NTRS1985

Role of Convection in Grain Refining

A quantitative representation of the heat and fluid flow fields in electromagnetically levitated (positioned) metallic specimens is examined. Experimental studies as well as modelling of those studies on undercooling and solidification of levitated metal droplets are also considered. Thermal measurements will be made of the undercooling and solidification of levitated metal droplets. Thermal measurements will be made of the undercooling and of the details of the ultra-rapid recalescence. This levitation technique combined with quenching will be used to aid in the development of coherent model for the solidification process related to structural studies, including thermodynamics and kinetics for nucleation and metastable solute partition, kinetics for solid/liquid interface velocity with high undercooling, and heat flow consideration.

Szekely, J.↗

NASA NTRS1985

Undercooling and solidification behavior in the InSb-Sb system

Use of the droplet emulsion technique has been successful in studying the undercooling and crystallization behavior of Sb, InSb, and an InSb-Sb eutectic alloy. Both droplet size and imposed cooling rate were influential in controlling the extent of liquid undercooling. The droplet surface coating was of significant importance in determining the resultant solidification product structure through its effect on nucleation kinetics. The maximum undercooling for pure Sb was extended from 0.08 to 0.23 T sub m. While simple crushing techniques provided a dramatic increase in droplet undercooling over the bulk material, emulsification treatments both enhanced this undercooling and allowed successful formation of a metastable simple cubic Sb phase. This phase was stable to temperatures approaching the melting point. The simple cubic phase was detected in droplet samples processed using DTA, air and water quenching, and drop tube processing under a helium gas atmosphere. A deviation in the InSb parent ingot composition limited interpretation of the line compound results, however, emulsification techniques extended the undercooling of this material to 0.17 T sub L and provided a stable, protective surface coating for the droplets. Emulsification of the eutectic alloy was effective at producing various levels of undercooling from 0.1 to 0.2 T sub E. Microstructural examination revealed a normal-type eutectic structure in the undercooled droplets indicating that solidification occurred within the coupled zone and that this zone is somewhat symmetric about the eutectic composition.

Graves, J. A.↗

NASA NTRS1985

Report from the Transfer-Laser Working Group

Light absorbing molecules and lasing molecules were discussed with regard to satisfying the following criteria for blackbody transfer lasers: (1) Good absorbers of blackbody radiation at 1500-2000 K; (2) Near resonant energy transfer from the absorbing gas to the lasant, provided not too many quantum number changes are required; (3) Dipole-dipole interactions for most efficient energy transfer; (4) Exothermic forward transfer reaction; (5) Polyatomic lasant molecules with at least two fundamental vibrational modes to ensure one or more states between the upper laser level and the ground state; (6) Polyatomic lasant molecules should not be so large or so complex that fast V-V relaxation occurs; (7) Metastable upper laser level for maintaining inversion, at least with respect to radiative and V-V decay; (8) Fast V-V into the upper laser level and out of the lower laser level; and (9) Lasing wavelengths less than 10.6 microns. Possible combinations of absorbers and lasants satisfying these criteria were discussed.

Meador, W. E.↗