Search NASA⌕ Search

SEARCH · Search NASA

Results for “method of cells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

The UW digital ozonesonde: Characteristics and flow rate calibration

During the austral springs of 1986 and 1987, a series of balloon soundings were conducted to characterize the temporal and vertical development of Antarctic ozone depletion using the electrochemical concentration cell method (ECC). An important part of this study was to perform correlative studies between ozone and aerosol particles. In order to facilitate these simultaneous measurements, a digital ozonesonde system was developed to interface with aerosol counters. The ozone measurements will be described herein. The ozonesonde modification was accomplished by converting the current output of the sonde to a frequency and adding this digital signal to the serial data stream of a Vaisala Corporation RS-80 radiosonde under microprocessor control. A number of advantages over the standard ozonesonde system currently in use are noted.

Harder, J. W.↗

Particle-In-Cell Simulation Of Explosive Flow

Report describes use of second-order particle-in-cell method to compute two-dimensional hydro/elastic/plastic flow of hemispherical copper shell after detonation of axisymmetric explosive charge.

Kwak, Dochan↗

Transonic blade-vortex interactions noise: A parametric study

Transonic Blade-Vortex Interactions (BVI) are simulated numerically and the noise mechanisms are investigated. The 2-D high frequency transonic small disturbance equation is solved numerically (VTRAN2 code). An Alternating Direction Implicit (ADI) scheme with monotone switches is used; viscous effects are included on the boundary and the vortex is simulated by the cloud-in-cell method. The Kirchoff method is used for the extension of the numerical 2-D near field aerodynamic results to the linear acoustic 3-D far field. The viscous effect (shock/boundary layer interaction) on BVI is investigated. The different types of shock motion are identified and compared. Two important disturbances with different directivity exist in the pressure signal and are believed to be related to the fluctuating lift and drag forces. Noise directivity for different cases is shown. The maximum radiation occurs at an angle between 60 and 90 deg below the horizontal for an airfoil fixed coordinate system and depends on the details of the airfoil shape. Different airfoil shapes are studied and classified according to the BVI noise produced.

Lyrintzis, A. S.↗

A study of the noise mechanisms of transonic blade-vortex interactions

Transonic blade-vortex interactions (BVI) are simulated numerically and the noise mechanisms are investigated. The two-dimensional high frequency transonic small disturbance equation is solved numerically (VTRAN2 code). An ADI scheme with monotone switches is used; viscous effects are included on the boundary, and the vortex is simulated by the cloud in cell method. The Kirchhoff method is used for the extension of the numerical two-dimensional near-field aerodynamic results to the linear acoustic three dimensional far field. The viscous effects (shock/boundary layer interactions) on BVI is investigated. The different types of shock motion are identified and compared. Two important disturbances with different directivity exist in the pressure signal and are believed to be related to the fluctuating lift and drag forces. Noise directivity for different cases is shown. The maximum radiation occurs at an angle between 60 and 90 degrees below the horizontal for an airfoil-fixed coordinate system and depends on the details of the airfoil shape. Different airfoil shapes are studied and classified according to the BVI noise produced.

Lyrintzis, Anastasios S.↗

Analysis of rotationally symmetric arrays of apertures on conducting spherical surfaces

Rotationally symmetric arrays of circular waveguide fed apertures on conducting spherical surfaces have been analyzed. Representation of the outside electromagnetic fields in terms of spherical transmission line modes permit the array analysis to be viewed as a spherical waveguide junction discontinuity problem. The apertures, in general, carry dual polarized circular waveguide TE11 modes. Two independent formulations - the unit cell method and the eigenexcitation method that take rotational symmetry into account - are developed and are checked against each other numerically for computational accuracy. These two formulations are analytically linked as discrete Fourier series pairs. It is seen that mutual coupling along the array decays more rapidly when the polarization of excitation is perpendicular to the array plane than when it is parallel to it. This analysis has been applied in the performance analysis of the Dome Lens phased array radar antenna.

Bondyopadhyay, Probir K.↗

Current Flow and Pair Creation at Low Altitude in Rotation-Powered Pulsars' Force-Free Magnetospheres: Space Charge Limited Flow

We report the results of an investigation of particle acceleration and electron-positron plasma generation at low altitude in the polar magnetic flux tubes of rotation-powered pulsars, when the stellar surface is free to emit whatever charges and currents are demanded by the force-free magnetosphere. We apply a new 1D hybrid plasma simulation code to the dynamical problem, using Particle-in-Cell methods for the dynamics of the charged particles, including a determination of the collective electrostatic fluctuations in the plasma, combined with a Monte Carlo treatment of the high-energy gamma-rays that mediate the formation of the electron-positron pairs.We assume the electric current flowing through the pair creation zone is fixed by the much higher inductance magnetosphere, and adopt the results of force-free magnetosphere models to provide the currents which must be carried by the accelerator. The models are spatially one dimensional, and designed to explore the physics, although of practical relevance to young, high-voltage pulsars. We observe novel behaviour (a) When the current density j is less than the Goldreich-Julian value (0 < j/j(sub GJ) < 1), space charge limited acceleration of the current carrying beam is mild, with the full Goldreich-Julian charge density comprising the charge densities of the beam and a cloud of electrically trapped particles with the same sign of charge as the beam. The voltage drops are of the order of mc(sup 2)/e, and pair creation is absent. (b) When the current density exceeds the Goldreich-Julian value (j/j(sub GJ) > 1), the system develops high voltage drops (TV or greater), causing emission of curvature gamma-rays and intense bursts of pair creation. The bursts exhibit limit cycle behaviour, with characteristic time-scales somewhat longer than the relativistic fly-by time over distances comparable to the polar cap diameter (microseconds). (c) In return current regions, where j/j(sub GJ) < 0, the system develops similar bursts of pair creation. These discharges are similar to those encountered in previous calculations by Timokhin of pair creation when the surface has a high work function and cannot freely emit charge. In cases (b) and (c), the intermittently generated pairs allow the system to simultaneously carry the magnetospherically prescribed currents and adjust the charge density and average electric field to force-free conditions. We also elucidate the conditions for pair creating beam flow to be steady (stationary with small fluctuations in the rotating frame), finding that such steady flows can occupy only a small fraction of the current density parameter space exhibited by the force-free magnetospheric model. The generic polar flow dynamics and pair creation are strongly time dependent. The model has an essential difference from almost all previous quantitative studies, in that we sought the accelerating voltage (with pair creation, when the voltage drops are sufficiently large; without, when they are small) as a function of the applied current.

Timokhin, A. N.↗

Summary and Statistical Analysis of the First AIAA Sonic Boom Prediction Workshop

A summary is provided for the First AIAA Sonic Boom Workshop held 11 January 2014 in conjunction with AIAA SciTech 2014. Near-field pressure signatures extracted from computational fluid dynamics solutions are gathered from nineteen participants representing three countries for the two required cases, an axisymmetric body and simple delta wing body. Structured multiblock, unstructured mixed-element, unstructured tetrahedral, overset, and Cartesian cut-cell methods are used by the participants. Participants provided signatures computed on participant generated and solution adapted grids. Signatures are also provided for a series of uniformly refined workshop provided grids. These submissions are propagated to the ground and loudness measures are computed. This allows the grid convergence of a loudness measure and a validation metric (dfference norm between computed and wind tunnel measured near-field signatures) to be studied for the first time. Statistical analysis is also presented for these measures. An optional configuration includes fuselage, wing, tail, flow-through nacelles, and blade sting. This full configuration exhibits more variation in eleven submissions than the sixty submissions provided for each required case. Recommendations are provided for potential improvements to the analysis methods and a possible subsequent workshop.

Park, Michael A.↗

Automation of Overset Structured Mesh Generation onBoundary Representation Geometries

A scheme is presented for the automatic generation of structured overset meshes ongeometries that are defined by Boundary Representation (BRep) solids. The surface meshsystem consists of face, edge and node meshes corresponding to the three respective basicBRep entity types. A cut-cell method is introduced to improve robustness of the on-geometrydetermination test for a face mesh grid point. A geometric component tagging scheme is utilizedto enhance local grid point distribution on a configuration with a large range of geometricscales. A cap grid topology is automatically utilized around the trailing edge of wing and tailtips to enhance mesh quality and to enable more effective surface coverage. Robustness of thehyperbolic surface marching method is improved by replacing the point projection scheme witha walking scheme. Relaxation of surface grid spacing at concave corners enables automatedhigh quality hyperbolic volume mesh creation. Domain connectivity is automatically performedon the surface mesh system. A variety of test cases are presented including a re-entry capsule,two models of the Juncture Flow Experiment wing-body, five rotorcraft concept vehicles, andvarious components of the High-Lift Common Research Model from the High-Lift PredictionWorkshop 4.

TTT↗

Efficient GPU implementation for Particle in Cell algorithm

Particle in cell method is widely used method in the plasma physics to study the trajectories of charged particles under electromagnetic fields. The PIC algorithm is computationally intensive and its time requirements are proportional to the number of charged particles involved in the simulation. The focus of the paper is to parallelize the PIC algorithm on Graphics Processing Unit (GPU). We present several performance tradeoffs related to the small shared memory and atomic operations on the GPU to achieve high performance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electrolytic/fuel cell bundles and systems including a current collector in communication with an electrode thereof

Electrolytic/fuel cell bundles and systems including such bundles include an electrically conductive current collector in communication with an anode or a cathode of each of a plurality of cells. A cross-sectional area of the current collector may vary in a direction generally parallel to a general direction of current flow through the current collector. The current collector may include a porous monolithic structure. At least one cell of the plurality of cells may include a current collector that surrounds an outer electrode of the cell and has at least six substantially planar exterior surfaces. The planar surfaces may extend along a length of the cell, and may abut against a substantially planar surface of a current collector of an adjacent cell. Methods for generating electricity and for performing electrolysis include flowing current through a conductive current collector having a varying cross-sectional area.

25 ENERGY STORAGE↗

Soft actuators and soft actuating devices

A soft buckling linear actuator is described, including: a plurality of substantially parallel bucklable, elastic structural components each having its longest dimension along a first axis; and a plurality of secondary structural components each disposed between and bridging two adjacent bucklable, elastic structural components; wherein every two adjacent bucklable, elastic structural components and the secondary structural components in-between define a layer comprising a plurality of cells each capable of being connected with a fluid inflation or deflation source; the secondary structural components from two adjacent layers are not aligned along a second axis perpendicular to the first axis; and the secondary structural components are configured not to buckle, the bucklable, elastic structural components are configured to buckle along the second axis to generate a linear force, upon the inflation or deflation of the cells. Methods of actuation using the same are also described.

42 ENGINEERING↗

3-D simulation codes for EMP E1 formation and propagation

LLNL is developing a suite of modern tools for simulating the generation and propagation of the prompt (E1) electromagnetic pulse (EMP). These include the 3-D EMPulse code, based on particle-in-cell methods and a Cartesian grid in the laboratory frame, and a fast-running companion 3-D code, SHEMP, which employs a vector spherical harmonic decomposition. EMPulse is a comprehensive, first-principles code with full generality and requiring significant computing resources. It tracks Compton electrons directly in the laboratory frame, and includes Ohmic and swarm models for the evolving local conductivity. SHEMP builds on the methods used in Longmire's fast-running CHAP code and in our own CHAP-lite; in those codes, 1-D spherical symmetry is assumed, and the calculation takes advantage of a separation of scales. In SHEMP we seek similar efficiencies in 3-D, incorporating non-spherically-symmetric physics via a pseudospectral approach. We describe these tools and other aspects of our project herein.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Soft actuators and soft actuating devices

A soft buckling linear actuator is described, including: a plurality of substantially parallel bucklable, elastic structural components each having its longest dimension along a first axis; and a plurality of secondary structural components each disposed between and bridging two adjacent bucklable, elastic structural components; wherein every two adjacent bucklable, elastic structural components and the secondary structural components in-between define a layer comprising a plurality of cells each capable of being connected with a fluid inflation or deflation source; the secondary structural components from two adjacent layers are not aligned along a second axis perpendicular to the first axis; and the secondary structural components are configured not to buckle, the bucklable, elastic structural components are configured to buckle along the second axis to generate a linear force, upon the inflation or deflation of the cells. Methods of actuation using the same are also described.

Yang, Dian↗

Synthesis and oxidation of methane

The present disclosure describes genes and proteins of the coenzyme F430 synthetic pathway. The genes and proteins in the pathway find uses as isolated nucleic acids, transformation vectors, a transformation media, genetically modified cells, methods of modulating methanogenesis, methods of modulating methane oxidation, methods of making a tetrapyrrole compound, methods of oxidizing methane, methods of biogenic methane synthesis is provided, methods of assaying an organism for potential methanogenic or methanotrophic activity, and isolated proteins.

10 SYNTHETIC FUELS↗

Synthesis and oxidation of methane

The present disclosure describes genes and proteins of the coenzyme F430 synthetic pathway. The genes and proteins in the pathway find uses as isolated nucleic acids, transformation vectors, a transformation media, genetically modified cells, methods of modulating methanogenesis, methods of modulating methane oxidation, methods of making a tetrapyrrole compound, methods of oxidizing methane, methods of biogenic methane synthesis is provided, methods of assaying an organism for potential methanogenic or methanotrophic activity, and isolated proteins.

Mansoorabadi, Steven↗

A cell-vertex multigrid method for the Navier-Stokes equations

A cell-vertex scheme for the Navier-Stokes equations, which is based on central difference approximations and Runge-Kutta time stepping, is described. Using local time stepping, implicit residual smoothing, a multigrid method, and carefully controlled artificial dissipative terms, very good convergence rates are obtained for a wide range of two- and three-dimensional flows over airfoils and wings. The accuracy of the code is examined by grid refinement studies and comparison with experimental data. For an accurate prediction of turbulent flows with strong separations, a modified version of the nonequilibrium turbulence model of Johnson and King is introduced, which is well suited for an implementation into three-dimensional Navier-Stokes codes. It is shown that the solutions for three-dimensional flows with strong separations can be dramatically improved, when a nonequilibrium model of turbulence is used.

Radespiel, R.↗

Method of making chalcogen catalysts for polymer electrolyte fuel cells

A method of making an electrode catalyst material using aqueous solutions. The electrode catalyst material includes a support comprising at least one transition metal and at least one chalcogen disposed on a surface of the transition metal. The method includes reducing a metal powder, mixing the metal powder with an aqueous solution containing at least one inorganic compound of the chalcogen to form a mixture, and providing a reducing agent to the mixture to form nanoparticles of the electrode catalyst. The electrode catalyst may be used in a membrane electrode assembly for a fuel cell.

Choi, Jong-Ho↗

Methods of expressing and detecting activity of expansin in plant cells

A method of expressing heterologous expansin in a plant cell is provided where a nucleic acid molecule encoding expansin is introduced into the plant cell and in an embodiment is operably linked to a promoter preferentially expressing in the seed tissue of the plant, and in another embodiment is linked to a promoter preferentially expressing in the embryo tissue of the seed. An embodiment provides the nucleic acid molecule is operably linked to a second nucleic acid molecule that directs expression to the endoplasmic reticulum, vacuole or cell wall. Plants and plant parts expressing expansin are provided. An assay for detection of expansin activity is also provided.

59 BASIC BIOLOGICAL SCIENCES↗