Search NASA⌕ Search

SEARCH · Search NASA

Results for “parallel processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Single-mode projection filters for modal parameter identification for flexible structures

Single-mode projection filters are developed for eigensystem parameter identification from both analytical results and test data. Explicit formulations of these projection filters are derived using the orthogonal matrices of the controllability and observability matrices in the general sense. A global minimum optimization algorithm is applied to update the filter parameters by using the interval analysis method. The updated modal parameters represent the characteristics of the test data. For illustration of this new approach, a numerical simulation for the MAST beam structure is shown by using a one-dimensional global optimization algorithm to identify modal frequencies and damping. The projection filters are practical for parallel processing implementation.

Huang, Jen-Kuang↗
NASA NTRS1988

Arranging computer architectures to create higher-performance controllers

Techniques for integrating microprocessors, array processors, and other intelligent devices in control systems are reviewed, with an emphasis on the (re)arrangement of components to form distributed or parallel processing systems. Consideration is given to the selection of the host microprocessor, increasing the power and/or memory capacity of the host, multitasking software for the host, array processors to reduce computation time, the allocation of real-time and non-real-time events to different computer subsystems, intelligent devices to share the computational burden for real-time events, and intelligent interfaces to increase communication speeds. The case of a helicopter vibration-suppression and stabilization controller is analyzed as an example, and significant improvements in computation and throughput rates are demonstrated.

Jacklin, Stephen A.↗
NASA NTRS1990

Fast, Real-Time, Animated Displays

Displays for Advanced Concepts Simulator (ACS) generated on Adage Raster Display System 3000 (RDS 3000). Improved programming techniques developed, and revisions to language implementation made. Both types of changes took better advantage of high-speed characteristics of RDS 3000 hardware. Increases in speed resulted from: utilization of parallel-processing capabilities of AGG4, and use of AGG4 to take advantage of certain high-speed characteristics of display memory not previously used. Result was fourfold increase in animation-update rate to 16 frames per second.

Kahlbaum, William M.↗
NASA NTRS1990

Advanced detection, isolation, and accommodation of sensor failures in turbofan engines: Real-time microcomputer implementation

The objective of the Advanced Detection, Isolation, and Accommodation Program is to improve the overall demonstrated reliability of digital electronic control systems for turbine engines. For this purpose, an algorithm was developed which detects, isolates, and accommodates sensor failures by using analytical redundancy. The performance of this algorithm was evaluated on a real time engine simulation and was demonstrated on a full scale F100 turbofan engine. The real time implementation of the algorithm is described. The implementation used state-of-the-art microprocessor hardware and software, including parallel processing and high order language programming.

Delaat, John C.↗
NASA NTRS1989

Eigensolution of finite element problems in a completely connected parallel architecture

A parallel algorithm for the solution of the generalized eigenproblem in linear elastic finite element analysis, (K)(phi)=(M)(phi)(omega), where (K) and (M) are of order N, and (omega) is of order q is presented. The parallel algorithm is based on a completely connected parallel architecture in which each processor is allowed to communicate with all other processors. The algorithm has been successfully implemented on a tightly coupled multiple-instruction-multiple-data (MIMD) parallel processing computer, Cray X-MP. A finite element model is divided into m domains each of which is assumed to process n elements. Each domain is then assigned to a processor, or to a logical processor (task) if the number of domains exceeds the number of physical processors. The macro-tasking library routines are used in mapping each domain to a user task. Computational speed-up and efficiency are used to determine the effectiveness of the algorithm. The effect of the number of domains, the number of degrees-of-freedom located along the global fronts and the dimension of the subspace on the performance of the algorithm are investigated. For a 64-element rectangular plate, speed-ups of 1.86, 3.13, 3.18 and 3.61 are achieved on two, four, six and eight processors, respectively.

Akl, Fred A.↗
NASA NTRS1990

Transient finite element computations on the transputer system

The aim was to study the solution of transient finite element problems on the Transputer system of parallel processors. The central difference time integration rule was used so that no equation solving was necessary. Also investigated was subcycling time integration which uses different time steps in different subdomains of the finite element mesh. A one-dimensional bar problem was analyzed using the parallel time integration algorithm. This involves subdividing the bar into subproblems which are assigned to different processors. Results show that the significant speed-up can be obtained through parallel processing. Also subcycling can give an additional speed-up in certain classes of problems. A two-dimensional problem was also examined to evaluate the effect of the communication to computation ratio on solution time.

Smolinski, Patrick J.↗
NASA NTRS1990

Implementation of Sensor and Control Designs for Bioregenerative Systems

The goal of the Spring 1990 EGM 4001 Design class was to design, fabricate, and test sensors and control systems for a closed loop life support system (CLLSS). The designs investigated were to contribute to the development of NASA's Controlled Ecological Life Support System (CELSS) at Kennedy Space Center (KSC). Designs included a seed moisture content sensor, a porous medium wetness sensor, a plant health sensor, and a neural network control system. The seed group focused on the design and implementation of a sensor that could detect the moisture content of a seed batch. The porous medium wetness group concentrated on the development of a sensor to monitor the amount of nutrient solution within a porous plate incorporating either infrared reflectance or thermal conductance properties. The plant health group examined the possibility of remotely monitoring the health of the plants within the Biomass Production Chamber (BPC) using infrared reflectance properties. Finally, the neural network group concentrated on the ability to use parallel processing in order to control a robot arm and analyze the data from the health sensor to detect regions of a plant.

Rodriguez, Pedro R.↗
NASA NTRS1990

Beam rider for an Articulated Robot Manipulator (ARM) accurate positioning of long flexible manipulators

Laser beam positioning and beam rider modules were incorporated into the long hollow flexible segment of an articulated robot manipulator (ARM). Using a single laser beam, the system determined the position of the distal ARM endtip, with millimetric precision, in six degrees of freedom, at distances of up to 10 meters. Preliminary designs, using space rated technology for the critical systems, of a two segmented physical ARM, with a single and a dual degree of freedom articulation, were developed, prototyped, and tested. To control the positioning of the physical ARM, an indirect adaptive controller, which used the mismatch between the position of the laser beam under static and dynamic conditions, was devised. To predict the behavior of the system and test the concept, a computer simulation model was constructed. A hierarchical artificially intelligent real time ADA operating system program structure was created. The software was designed for implementation on a dedicated VME bus based Intel 80386 administered parallel processing multi-tasking computer system.

Malachowski, M. J.↗
NASA NTRS1989

Adaptive implicit-explicit and parallel element-by-element iteration schemes

Adaptive implicit-explicit (AIE) and grouped element-by-element (GEBE) iteration schemes are presented for the finite element solution of large-scale problems in computational mechanics and physics. The AIE approach is based on the dynamic arrangement of the elements into differently treated groups. The GEBE procedure, which is a way of rewriting the EBE formulation to make its parallel processing potential and implementation more clear, is based on the static arrangement of the elements into groups with no inter-element coupling within each group. Various numerical tests performed demonstrate the savings in the CPU time and memory.

Tezduyar, T. E.↗
NASA NTRS1989

Spectral element simulations of laminar and turbulent flows in complex geometries

Spectral element methods are high-order weighted residual techniques based on spectral expansions of variables and geometry for the Navier-Stokes (NS) and transport equations. Here, practical aspects of these methods and their efficient implementation are examined, and several examples of flows in truly complex geometries are presented. The spectral element discretization for NS equations is introduced, and the convergence of the method is addressed. An efficient data management scheme is discussed in the context of parallel processing computations. The method is validated by comparing the spectral element solutions with the exact eigensolutions for the Orr-Sommerfeld equations in two and three dimensions. Computer-aided flow visualizations are presented for an impulsive flow past a sharp edge wedge. Three-dimensional states of channel flow disrupted by an array of cylindrical eddy promoters are studied, and the results of a direct simulation of the turbulent flow in a plane channel are presented.

Karniadakis, George EM↗
NASA NTRS1990

Aeroelastic problems in turbomachines

A review of the field of turbomachinery aeroelasticity is presented. Developments over the past decade are emphasized, and an assessment of possible future directions of research is offered. The paper reviews the areas of unsteady cascade flows, structural modeling, and flutter prediction methods. Representative results for unsteady flow calculations and flutter boundary predictions in subsonic, transonic, and supersonic flows are discussed, including recent calculations based on the methods of computational fluid mechanics. Results from current attempts to correlate experimental data with theoretical predictions are discussed briefly. It is recommended that future research include investigations of novel approaches to flutter calculations that can take full advantage of parallel processing supercomputers. The feasibility of using mistuning and aeroelastic tailoring as passive flutter suppression techniques should also be pursued.

Bendiksen, Oddvar O.↗
NASA NTRS1990

Time optimal feedback control of discrete systems with bounded inputs

Deadbeat control theory gives a feedback solution to the time optimal control of discrete time systems. Experience has shown the results to be impractical because they ignore bounds on the actuator strength. This paper develops two algorithms for generating time optimal control in feedback form for discrete systems with bounded controls. The results are also applicable for generating recovery regions and the set of reachable states. For multiple control problems a method of generating sublayers is developed which decreases off-line and on-line computational effort. Two algorithms are presented with somewhat different computational and storage requirements. The algorithms are practical within certain dimension constraints, and are natural for implementation with parallel processing.

Chen, Xin↗
NASA NTRS1990

Order (n) DISCOS for multibody systems with gear reduction

Recent developments in O(n) algorithms (where n is the number of bodies in the system) and parallel processing have drastically reduced the computer time needed to simulate systems involving many bodies. This paper presents a gear-reduction model for the O(n) version of DISCOS, a standard software package for simulation and analysis of flexible multibody systems. The gear-reduction model allows the accurate modeling of harmonic drives, which are commonly used in robot joints. The formulation has been implemented and validated with known results. The gear model can also be used for gear-train, rack-and-pinion, and screw joints.

Chun, Hon M.↗
NASA NTRS1990

Modulation and coding for satellite and space communications

Several modulation and coding advances supported by NASA are summarized. To support long-constraint-length convolutional code, a VLSI maximum-likelihood decoder, utilizing parallel processing techniques, which is being developed to decode convolutional codes of constraint length 15 and a code rate as low as 1/6 is discussed. A VLSI high-speed 8-b Reed-Solomon decoder which is being developed for advanced tracking and data relay satellite (ATDRS) applications is discussed. A 300-Mb/s modem with continuous phase modulation (CPM) and codings which is being developed for ATDRS is discussed. Trellis-coded modulation (TCM) techniques are discussed for satellite-based mobile communication applications.

Yuen, Joseph H.↗
NASA NTRS1990

Shared direct memory access on the Explorer 2-LX

Advances in Expert System technology and Artificial Intelligence have provided a framework for applying automated Intelligence to the solution of problems which were generally perceived as intractable using more classical approaches. As a result, hybrid architectures and parallel processing capability have become more common in computing environments. The Texas Instruments Explorer II-LX is an example of a machine which combines a symbolic processing environment, and a computationally oriented environment in a single chassis for integrated problem solutions. This user's manual is an attempt to make these capabilities more accessible to a wider range of engineers and programmers with problems well suited to solution in such an environment.

Musgrave, Jeffrey L.↗
NASA NTRS1990

Method of up-front load balancing for local memory parallel processors

In a parallel processing computer system with multiple processing units and shared memory, a method is disclosed for uniformly balancing the aggregate computational load in, and utilizing minimal memory by, a network having identical computations to be executed at each connection therein. Read-only and read-write memory are subdivided into a plurality of process sets, which function like artificial processing units. Said plurality of process sets is iteratively merged and reduced to the number of processing units without exceeding the balance load. Said merger is based upon the value of a partition threshold, which is a measure of the memory utilization. The turnaround time and memory savings of the instant method are functions of the number of processing units available and the number of partitions into which the memory is subdivided. Typical results of the preferred embodiment yielded memory savings of from sixty to seventy five percent.

Baffes, Paul Thomas↗
NASA NTRS1991

Hyperswitch communication network

The Hyperswitch Communication Network (HCN) is a large scale parallel computer prototype being developed at JPL. Commercial versions of the HCN computer are planned. The HCN computer being designed is a message passing multiple instruction multiple data (MIMD) computer, and offers many advantages in price-performance ratio, reliability and availability, and manufacturing over traditional uniprocessors and bus based multiprocessors. The design of the HCN operating system is a uniquely flexible environment that combines both parallel processing and distributed processing. This programming paradigm can achieve a balance among the following competing factors: performance in processing and communications, user friendliness, and fault tolerance. The prototype is being designed to accommodate a maximum of 64 state of the art microprocessors. The HCN is classified as a distributed supercomputer. The HCN system is described, and the performance/cost analysis and other competing factors within the system design are reviewed.

Peterson, J.↗