Search NASA⌕ Search

SEARCH · Search NASA

Results for “preprocessing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Development of large rotorcraft transmissions

The U.S. Army Heavy Lift Helicopter (HLH) represents a large rotorcraft which was developed by an American aerospace company. In the early 1970's with the HLH Advanced Technology Components (ATC) program, the development of large rotorcraft transmission and drive systems was started. Failures in the spiral bevel gearing were experienced in tests because the employed method of analysis had not considered the effect of rim bending. Consequently, new gears with strengthened rims were designed and fabricated. For a more accurate prediction of the load capacity of the gears, an extensive Finite Element Method (FEM) system was developed. The U.S. Army's XCH-62 HLH aft rotor transmission was finally successfully tested at full design torque and speed. A description of the test program is provided, and the analytical program is discussed. The analytical phase includes the development of a preprocessing program which aids in the review of calculated FEM stresses.

Samanich, N. E.↗
NASA NTRS1985

Analysis of Spiral Bevel Gearing

Program generalized for automated finite-element-method model generation. Tedious task of finite-element-method (FEM) model preparation greatly reduced by development of preprocessing program for automated model generation. Utility of program, including ability to rapidly evaluate parametric changes, demonstrated for spiral, helical, and spiral bevel gearing. Postprocessing program also developed, aids in review and interpretation of calculated FEM stresses.

Drago, R. J.↗
NASA NTRS1984

Space America's commercial space program

Space America prepared a private sector land observing space system which includes a sensor system with eight spectral channels configured for stereoscopic data acquisition of four stereo pairs, a spacecraft bus with active three-axis stabilization, a ground station for data acquisition, preprocessing and retransmission. The land observing system is a component of Space America's end-to-end system for Earth resources management, monitoring and exploration. In the context of the Federal Government's program of commercialization of the US land remote sensing program, Space America's space system is characteristic of US industry's use of advanced technology and of commercial, entrepreneurial management. Well before the issuance of the Request for Proposals for Transfer of the United States Land Remote Sensing Program to the Private Sector by the US Department of Commerce, Space Services, Inc., the managing venturer of Space America, used private funds to develop and manage its sub-orbital launch of its Conestoga launch vehicle.

Macleod, N. H.↗
NASA NTRS1983

Noise removal in multichannel images

A adaptive filtering method, the Windrow-Hoff algorithm, for enhancing multichannel signals against aditive noise was investigated. It removes noise for multichannel images containing correlated signal compoments but uncorrelated noise components. Its potential application is the enhancement of multichannel microwave satellite images as a preprocessing step for the extraction of geophysical parameters.

Yeh, C. L.↗
NASA NTRS1983

Detecting agricultural to urban land use change from multi-temporal MSS digital data

Conversion of agricultural land to a variety of urban uses is a major problem along the Wasatch Front, Utah. Although LANDSAT MSS data is a relatively coarse tool for discriminating categories of change in urban-size plots, its availability prompts a thorough test of its power to detect change. The procedures being applied to a test area in Salt Lake County, Utah, where the land conversion problem is acute are presented. The identity of land uses before and after conversion was determined and digital procedures for doing so were compared. Several algorithms were compared, utilizing both raw data and preprocessed data. Verification of results involved high quality color infrared photography and field observation. Two data sets were digitally registered, specific change categories internally identified in the software, results tabulated by computer, and change maps printed at 1:24,000 scale.

Ridd, M. K.↗
NASA NTRS1984

The MST Radar Technique

The coherent radar technique is reviewed with special emphasis to mesosphere-stratosphere-troposphere (MST) radars operating in the VHF band. Some basic introduction to Doppler radar measurements and the radar equation is followed by an outline of the characteristics of atmospheric turbulence, viewed from the scattering and reflection processes of radar signals. Radar signal acquisition and preprocessing, namely coherent detection, digital sampling, pre-integration and coding, is briefly discussed. The data analysis is represented in terms of the correlation and spectrum analysis, yielding the essential parameters: power, signal-to-noise ratio, average and fluctuating velocity and persistency. The techniques to measure wind velocities, viz. the different modes of the Doppler method as well as the space antenna method are surveyed and the feasibilities of the MST radar interferometer technique are elucidated. A general view on the criteria to design phased array antennas is given. An outline of the hardware of a typical MST radar system is presented.

Roettger, J.↗
NASA NTRS1984

Summary of progress at the Poker Flat Observatory in Alaska

A description of the status of the Poker Flat MST Radar as of early 1983 is included in the 1983 mesosphere-stratosphere-troposphere MST Workshop Proceedings. The Observatory continues to operate in a continuous data-taking mode, except for a three-week planned campaign experiment concurrent with the STATE rocket program during June 1983. Construction of the digital preprocessing system mentioned in the last status report is all but complete. This additional improvement should be operational by late summer. The possibility of steering the array also mentioned in the last status report is being investigated. A project is underway to electronically steer the one-quarter vertical section of the array. Steering will be in finite steps within about + or - 5 deg of vertical. Successful testing of this modification may lead to eventually steering the entire array in this manner. Data analysis of the data base (now more than four years in length) continues with well over one dozen extramural scientific groups participating.

Balsley, B. B.↗
NASA NTRS1984

Future interactive data systems

The information and control requirements of the investigator-users of future free-flying, platform-based, or Space Station-based scientific experiments are assessed, and the implications of these requirements for the design of the information systems are discussed. The principal requirements include near-real-time interaction with the payload, distributed or remote payload command and control, rapid access to quick-look data, flexibility of payload command sequences, on-demand uplink-downlink availability, system transparency, and modular design to facilitate replacement of system components. Current developments in systems architecture such as increased use of onboard microprocessors to select and preprocess data and transmit autonomous streams directly to the user, standardization of interfaces, and the NASA Tracking and Data Relay Satellite System are characterized, and block diagrams of present and future systems are provided.

Bracken, P. A.↗
NASA NTRS1984

Development of a quantitative basis for selection of spectral features in a vegetation monitoring system

The development of an objective methodology for evaluation of alternative Landsat data preprocessing options, spectral transform features for monitoring vegetation, and feature summarization algorithms is presented. Based on estimates of spectral separability between a target class and its confusion classes, analysis of variance techniques are used to evaluate potential design options for large scale vegetation monitoring systems. Case studies are presented for early season and through the season spring small grains separation and for barley/other spring small grains separation. It is concluded that a basis for efficient, objective selection among alternative feature extraction approaches has been established for the large scale vegetation mapping/inventory problem. Although the approach has been demonstrated for the unitemporal class separability case, extensions to the multitemporal case are under development.

Phinney, D. E.↗
NASA NTRS1984

Landsat image registration - A study of system parameters

Some applications of Landsat data, particularily agricultural and forestry applications, require the ability to geometrically superimpose or register data acquired at different times and possibly by different satellites. An experimental investigation relating to a registration processor used by the Johnson Space Center for this purpose is the subject of this paper. Correlation of small subareas of images is at the heart of this registration processor and the manner in which various system parameters affect the correlation process is the prime area of investigation. Parameters investigated include preprocessing methods, methods for detecting sucessful correlations, fitting a surface to the correlation patch, fraction of pixels designated as edge pixels in edge detection adn local versus global generation of edge images. A suboptimum search procedure is used to find a good parameter set for this registration processor.

Wacker, A. G.↗
NASA NTRS1984

Early season spring small grains proportion estimation

An accurate, automated method for estimating early season spring small grains from Landsat MSS data is discussed. The method is summarized and the results of its application to 100 sample segment-years of data from the US Northern Great Plains in 1976, 1977, 1978, and 1979 are summarized. The results show that this estimator provides accurate estimates earlier in the growing season than previous methods. Ground truth is required only in the estimator development, and data storage, transmission, preprocessing, and processing requirements are minimal.

Phinney, D. E.↗
NASA NTRS1983

A survey of automated remote sensing for agriculture

The state-of-the-art of the technology available to make remote sensing crop production estimates is reviewed with reference to several past and present research projects. In particular, attention is given to Landsat data acquisition, registration and preprocessing, data transformation, data modeling, proportion estimation, and labeling. Development stage models and crop condition models are briefly characterized, and areas where further research is needed are identified.

Hall, F. G.↗
NASA NTRS1983

Improving our understanding of the remote sensing process

Plans for two fundamental research programs aimed at improving an understanding of the physics and mathematics of remote sensing are discussed. The first program, Scene Radiation and Atmospheric Research Program, is concerned with developing the capability to determine biophysical attributes of terrestrial scenes through an improved understanding of the relationships between those properties and remotely sensed radiation. The research issues in the second program, Mathematical Pattern Recognition and Image Analysis, are discussed with reference to the following five categories: preprocessing, digital image representation, object scene inference, computational structures, and continuing studies.

Calabrese, M. A.↗
NASA NTRS1983

Comparison of modelled and empirical atmospheric propagation data

The radiometric integrity of TM thermal infrared channel data was evaluated and monitored to develop improved radiometric preprocessing calibration techniques for removal of atmospheric effects. Modelled atmospheric transmittance and path radiance were compared with empirical values derived from aircraft underflight data. Aircraft thermal infrared imagery and calibration data were available on two dates as were corresponding atmospheric radiosonde data. The radiosonde data were used as input to the LOWTRAN 5A code which was modified to output atmospheric path radiance in addition to transmittance. The aircraft data were calibrated and used to generate analogous measurements. These data indicate that there is a tendency for the LOWTRAN model to underestimate atmospheric path radiance and transmittance as compared to empirical data. A plot of transmittance versus altitude for both LOWTRAN and empirical data is presented.

Schott, J. R.↗
NASA NTRS1984

Use of satellite data in agricultural surveys

The state-of-the-art of crop surveying by satellite is reviewed with an emphasis on the signature extension problem. Registration and preprocessing procedures are discussed with refereence to: normalization of the radiometric values of each scene for scene-to-scene differences; registration techniques, implemented at the NASA Johnson Space Center, capable of 0.5 pixel root-mean-square error; and current research in this direction. Data transformation and modeling techniques applied to the Landsat MSS images and a solution for the field-to-field variations of the greenness and brightness temporal trajectories are included. Finally, a review of the mixture decomposition method of labeling and estimating the areal proportions is given.

Hall, F. G.↗
NASA NTRS1984

Summary of workshop on the application of VLSI for robotic sensing

It was one of the objectives of the considered workshop to identify near, mid, and far-term applications of VLSI for robotic sensing and sensor data preprocessing. The workshop was also to indicate areas in which VLSI technology can provide immediate and future payoffs. A third objective is related to the promotion of dialog and collaborative efforts between research communities, industry, and government. The workshop was held on March 24-25, 1983. Conclusions and recommendations are discussed. Attention is given to the need for a pixel correction chip, an image sensor with 10,000 dynamic range, VLSI enhanced architectures, the need for a high-density serpentine memory, an LSI-tactile sensing program, an analog-signal preprocessor chip, a smart strain gage, a protective proximity envelope, a VLSI-proximity sensor program, a robot-net chip, and aspects of silicon micromechanics.

Brooks, T.↗
NASA NTRS1985

Glass breaking strength: The role of surface flaws and treatments

Although the intrinsic strength of silicon dioxide glass is of the order of 10 to the 6th power lb/sq in, the practical strength is roughly two orders of magnitude below this theoretical limit, and depends almost entirely on the surface condition of the glass, that is, the number and size of flaws and the residual surface compression (temper) in the glass. Glass parts always fail in tension when these flaws grow under sustained loading to some critical size. Research associated with glass encapsulated crystalline-Si photovoltaic (PV) modules has greatly expanded our knowledge of glass breaking strength and developed sizeable data base for commercially available glass types. A detailed design algorithm is developed for thickness sizing of rectangular glass plates subject to pressure loads. Additional studies examine the strength of glass under impact loading conditions such as that caused by hail. Although the fundamentals of glass breakage are directly applicable to thin film modules, the fracture strength of typical numerical glass must be replaced with data that reflect the high temperature tin oxide processing, laser scribing, and edge processing peculiar to thin film modules. The fundamentals of glass breakage applicable to thin film modules and preliminary fracture strength data for a variety of 1 ft square glass specimens representing preprocessed and post processed sheets from current amorphous-Si module manufacturers are presented.

Moore, D.↗
NASA NTRS1982

Computer program for post-flight evaluation of the control surface response for an attitude controlled missile

A FORTRAN IV coded computer program is presented for post-flight analysis of a missile's control surface response. It includes preprocessing of digitized telemetry data for time lags, biases, non-linear calibration changes and filtering. Measurements include autopilot attitude rate and displacement gyro output and four control surface deflections. Simple first order lags are assumed for the pitch, yaw and roll axes of control. Each actuator is also assumed to be represented by a first order lag. Mixing of pitch, yaw and roll commands to four control surfaces is assumed. A pseudo-inverse technique is used to obtain the pitch, yaw and roll components from the four measured deflections. This program has been used for over 10 years on the NASA/SCOUT launch vehicle for post-flight analysis and was helpful in detecting incipient actuator stall due to excessive hinge moments. The program is currently set up for a CDC CYBER 175 computer system. It requires 34K words of memory and contains 675 cards. A sample problem presented herein including the optional plotting requires eleven (11) seconds of central processor time.

Knauber, R. N.↗