Search NASA⌕ Search

SEARCH · Search NASA

Results for “propagator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Assessment of Unsteady Propagation Characteristics and Corrections in Aeroacoustic Wind Tunnels Using an Acoustic Pulse

Two types of aeroacoustic wind tunnel test section configurations have been tested in the NASA Langley Quiet Flow Facility. The first is a more traditional open-jet configuration, where test section flow passes unbounded through the facility anechoic chamber. The second is the more recent Kevlar wall configuration, where a tensioned Kevlar sheet bounds the test section flow from the facility anechoic chamber. For both configurations, acoustic instrumentation is in the surrounding quiescent space. Both configurations are evaluated with a laser-based pulsed acoustic source, which provides unique capability for assessing the facility unsteady acoustic propagation characteristics. Metrics based on the wander and spread of the pulses are evaluated and show that measurements using Kevlar walls experience dramatically reduced unsteady effects when compared to the open-jet configuration. This leads to a corresponding improvement in coherence between microphones with the Kevlar configuration. Corrections for magnitude and phase for propagation through Kevlar as compared to open-jet propagation are calculated. While limitations in the experimental setup make quantitative analysis difficult, qualitative analysis shows Kevlar magnitude corrections similar to those determined in previous literature. Directivity effects beyond those already present for open-jet configurations are minimal. Phase corrections relative to open-jet configurations are indeterminate within the limitations of the experiment, though data suggest such corrections are not extreme. The background noise produced by the Kevlar is found to be its one drawback when compared with the open-jet configuration, showing significantly greater levels at high frequencies.

Bahr, Christopher↗
NASA NTRS2019

Recent Enhancements to NASA’s PCBoom Sonic Boom Propagation Code

This paper presents the recent updates the author has made to PCBoom sonic boom propagation code on its computational efficiency, predictive capability, and file operations. The updated version has recently been released and has a Burgers’ equation solver, which is computationally more efficient than that in the older version by 2 to 3 orders of magnitude. The updated version also enhances the accuracy of the sonic boom propagation prediction by accounting for the full wind effects on the shock wave propagation. Predictions from the updated PCBoom are compared with predictions from the older version and with data from flight tests. Other upgrades and changes that have been made in the latest version include support for Unix-like operating systems, bug fixes, and generation of new types of output files that allow for better manipulation of PCBoom-generated data.

Lonzaga, Joel B.↗
NASA NTRS2020

3D Propagation of Relativistic Solar Protons through Interplanetary Space

Context. Solar Energetic Particles (SEPs) with energy in the GeV range can propagate to Earth from their acceleration region near the Sun and produce Ground Level Enhancements (GLEs). The traditional approach to interpreting and modelling GLE observations assumes particle propagation only parallel to the magnetic field lines of interplanetary space, i.e. it is spatially 1D. Recent measurements by PAMELA have characterised SEP properties at 1 AU for the ~100 MeV-1 GeV range at high spectral resolution. Aims. We model the transport of GLE-energy solar protons using a 3D approach, to assess the effect of the Heliospheric Current Sheet (HCS) and drifts associated to the gradient and curvature of the Parker spiral. We derive 1 AU observables and compare the simulation results with data from PAMELA. Methods. We use a 3D test particle model including a HCS. Monoenergetic populations are studied first to obtain a qualitative picture of propagation patterns and numbers of crossings of the 1 AU sphere. Simulations for power law injection are used to derive intensity profiles and fluence spectra at 1 AU. A simulation for a specific event, GLE 71, is used to compare with PAMELA data. Results. Spatial patterns of 1 AU crossings and the average number of crossings are strongly influenced by 3D effects, with significant differences between periods of A+ and A- polarities. The decay time constant of 1 AU intensity profiles varies depending on the position of the observer and is not a simple function of the mean free path as in 1D models. Energy dependent leakage from the injection flux tube is particularly important for GLE energy particles, resulting in a rollover in the spectrum.

Solar energetic particles↗
NASA NTRSDate not supplied

Initiation and Propagation of Skin/Stiffener Separation in Postbuckled Structures Subjected to Cyclic Loads

A methodology is proposed to evaluate experimentally and numerically the initiation and propagation of skin/stiffener separation in postbuckled panels subjected to cyclic loads. The response mechanisms that characterize skin/stiffener separation were investigated using a three point bend (3PB) test specimen, which is a simple specimen consisting of a laminate representing the skin and a doubler representing the stiffener flange. The 3PB tests were performed under quasi-static and cyclic loads. A fatigue cohesive model was used to analyze the initiation and propagation of skin/stiffener separation in the 3PB. The results indicate that the fatigue cohesive model with model parameters obtained from quasi-static fracture tests can provide accurate predictions of initiation from a pristine state, and the rate of fatigue crack propagation for a variety of mode mixities, load levels, and stress ratios.

Carlos G Davila↗
NASA NTRSDate not supplied

Initiation and Propagation of Skin/Stiffener Separation in Postbuckled Structures

A methodology is proposed to experimentally and numerically evaluate the initiation and propagation of skin/stiffener separation in postbuckled panels subjected to cyclic loads. The response mechanisms that characterize skin/stiffener separation were investigated using a three point bend (3PB) test specimen, which is a simple specimen consisting of a laminate representing the skin and a doubler representing the stiffener flange. The 3PB tests were performed under quasi-static and cyclic loads. A fatigue cohesive model was used to analyze the initiation and propagation of skin/stiffener separation in the 3PB specimen. The results indicate that the fatigue cohesive model with model parameters obtained from quasi-static fracture tests can provide accurate predictions of initiation from a pristine state, and the rate of fatigue crack propagation for a variety of mode mixities, load levels, and stress ratios.

Carlos G. Dávila↗
NASA NTRS2021

Unsteady Propagation and Mean Corrections in Open-Jet and Kevlar® Wind Tunnels

Two types of aeroacoustic wind-tunnel test section configurations have been tested in the NASA Langley Quiet Flow Facility. The first is a more traditional open-jet configuration, where test section flow passes unbounded through the facility anechoic chamber. The second is a Kevlar® panel configuration, where a tensioned Kevlar sheet constrains the test section flow from the facility anechoic chamber. For both configurations, acoustic instrumentation is in the surrounding quiescent space. Both configurations are evaluated with a laser-based pulsed acoustic source, which provides unique capability for assessing the facility unsteady acoustic propagation characteristics. Metrics based on the wander and spread of the pulses are evaluated, and show that measurements using Kevlar walls experience dramatically reduced unsteady effects when compared to the open-jet configuration. This leads to a corresponding improvement in coherence between microphones with the Kevlar configuration, by reducing the variation in magnitude and phase differences between channels. Magnitude corrections for propagation through Kevlar as compared to open-jet propagation are calculated. Although limitations in the experimental setup make quantitative analysis difficult, qualitative analysis shows Kevlar magnitude corrections similar to those determined in previous literature. Directivity effects beyond those already present for open-jet configurations are minimal. When compared with the open-jet configuration, the background noise produced by the Kevlar is found to be its one drawback, showing significantly greater levels at high frequencies.

wind tunnel testing, hybrid acoustic tunnel, facil↗
NASA NTRS1994

ACTS Propagation Campaign

Because of a shortage of propagation data in satellite links, the existing Ka-band propagation models are inadequate for accurately predicting tropospheric-induced anomalies of the slant path. To remedy this shortcoming, NASA has implemented the Advanced Communications Technology Satellite (ACTS) Propagation Campaign.

Ka-band↗
NASA NTRSDate not supplied

An exact solution of an augmented Burgers equation and amplitude-dependent acoustic propagation speed

Nonlinear sound propagation in the atmosphere is usually modeled using an augmented Burgers equation accounting for a weak nonlinearity and atmospheric absorption. Because the absorption includes the molecular vibrational relaxation, such a Burgers equation is more complex than the regular Burgers equation that only accounts for the thermoviscous dissipation in the absorption. Although an exact solution of the regular Burgers equation has long been derived using the Cole- Hopf transform, an exact solution of the augmented Burgers equation has not been derived previously. Thus, this paper presents an exact solution of the augmented Burgers equation. This novel solution is shown to be equivalent to the solution using the Cole-Hopf transform when the absorption only involves thermoviscous dissipation. It can also be reduced to the known solution of an N-wave when the absorption is ignored. The augmented Burgers equation is an approximation valid for weak nonlinearity. However, this assumption may not be accurate for acoustic signals propagating from the lower atmosphere and which are subsequently refracted downward from the upper atmosphere (e.g., stratosphere and thermosphere) due to the decreasing air density with increasing altitude [Lonzaga, et al., Geophysical Journal International, 200(3), pp.1347-1361]. Consequently, the current paper also discusses the effects of a strong nonlinearity that lead to an amplitude-dependent increase in signal propagation speed. For an impulsive signal such as a sonic boom, these effects cause a dispersion of the signal similar to the observed dispersion of acoustic signals from supersonic Concorde as well as from large explosions.

Joel B Lonzaga↗
NASA NTRSDate not supplied

Updated Noise Dose Range of NASA’s X-59 Aircraft Estimated from Propagation Simulations

A follow-on study to Doebler and Loubeau, “The noise dose range of the X-59 estimated from propagation simulations,” JASA 150(4), A208 (2021); doi:10.1121/10.0008134 is described. In the previous work, propagation simulations of NASA’s X-59 sonic thump were conducted using two near-field pressure solutions from NASA’s Cart3D computational fluid dynamics (CFD) code. The near-fields were propagated through realistic atmospheric profiles from the Climate Forecast System Version 2 database across the USA, and Perceived Level statistics of the thumps were presented. The current work repeats the previous analyses, instead using near-field CFD solutions from NASA’s Fully Unstructured Navier-Stokes (FUN3D) code for the same aircraft conditions (Mach 1.4 at 53,200 feet and Mach 1.3 at 43,000 feet), which achieve the minimum and maximum cruise loudness. NASA and contractors in the X-59 development and community noise testing project mutually agreed upon using FUN3D for generating near-field pressures. Sonic thump loudness statistics using the FUN3D near-fields are similar to those of Cart3D. The min loudness condition is about 1 dB (PL) greater when using the FUN3D solution, and the max loudness condition results are nearly identical. Understanding the X-59’s dose range for various flight and atmospheric conditions is important for planning X-59 community noise surveys.

X-59↗
NASA NTRSDate not supplied

4pPA1 - Turbulence Effects on Shaped Booms: Central Composite Design of Modeled Atmospheric Turbulence Parameters for Sonic Boom Propagation

Propagation of sonic booms through turbulence reduces mean sonic boom perception metric levels and also causes considerable variability. NASA’s PCBoom suite of sonic boom acoustic propagation modules includes an approximate method for accounting for the effects of turbulence on traditional N-wave sonic booms. The current implementation is ineffective for shaped sonic booms or low-booms, and it also has limited values for turbulence and ambient input parameters. NASA’s future X-59 low-boom community noise surveys require an accurate estimate of the effects of turbulence in regions across the USA, so the module must be improved. This work presents the methods of selecting which ambient and turbulence parameters should be included in an improved PCBoom turbulence module. Turbulence and ambient data were collected from two atmospheric model databases, the Climate Forecast System Version 2 and European Centre for Medium-Range Weather Forecast Reanalysis Version 5 (ERA5), hourly from 7 AM to 7 PM local time for 10 years at 19 locations across the USA. A fully-factorial propagation analysis using these parameters would be exceedingly computationally expensive. Instead, a central composite design was chosen resulting in 45 combinations of ambient and turbulence parameters. These 45 cases effectively sample the space balancing computational burden.

turbulence↗
NASA NTRS1967

Crack propagation at stresses below the fatigue limit.

Crack propagation for stainless steel and Ti alloy at stresses below fatigue limit, noting of alternating stress cycles crack propagation for stainless steel and Ti alloy at stresses below fatigue limit, noting role of alternating stress cycles

STAINLESS STEEL↗
NASA NTRS1951

Theory of flame propagation

The mechanism of flame propagation has been qualitatively formulated. In accordance with this formulation, the chemical reaction initiated in some layer brings about an increase in the temperature; because of the heat conduction, the temperature is raised in the neighboring layer where in turn the chemical reaction is initiated. In this manner the flame is propagated.

THEORIES - FLAME-PROPAGATION↗
NASA NTRS1999

Propagation Database Version 6.0

The National Aeronautics and Space Administration's (NASA's) Propagation Program supports academic research that models various propagation phenomena in the space research frequency bands.

propagation database models↗
NASA NTRS2012

A Survey of Symplectic and Collocation Integration Methods for Orbit Propagation

Demands on numerical integration algorithms for astrodynamics applications continue to increase. Common methods, like explicit Runge-Kutta, meet the orbit propagation needs of most scenarios, but more specialized scenarios require new techniques to meet both computational efficiency and accuracy needs. This paper provides an extensive survey on the application of symplectic and collocation methods to astrodynamics. Both of these methods benefit from relatively recent theoretical developments, which improve their applicability to artificial satellite orbit propagation. This paper also details their implementation, with several tests demonstrating their advantages and disadvantages.

integration↗
NASA NTRS2009

Mean Element Propagations Using Numerical Averaging

The long-term evolution characteristics (and stability) of an orbit are best characterized using a mean element propagation of the perturbed two body variational equations of motion. The averaging process eliminates short period terms leaving only secular and long period effects. In this study, a non-traditional approach is taken that averages the variational equations using adaptive numerical techniques and then numerically integrating the resulting EOMs. Doing this avoids the Fourier series expansions and truncations required by the traditional analytic methods. The resultant numerical techniques can be easily adapted to propagations at most solar system bodies.

orbit propagations↗
NASA NTRS2017

Design of a Combined Beacon Receiver and Digital Radiometer for 40 GHz Propagation Measurements at the Madrid Deep Space Communications Complex

NASA Glenn Research Center (GRC) and the Jet Propulsion Laboratory (JPL) have jointly developed an atmospheric propagation terminal to measure and characterize propagation phenomena at 40 GHz at the Madrid Deep Space Communications Complex (MDSCC) in Robledo de Chavela, Spain. The hybrid Q-band system utilizes a novel design which combines a 40 GHz beacon receiver and digital radiometer into the same RF front-end and observes the 39.402 GHz beacon of the European Space Agencys Alphasat Aldo Paraboni TDP5 experiment. Atmospheric measurements include gaseous absorption, rain fade, and scintillation. The radiometric measurement is calibrated by means of an included noise diode as well as tipping calibration. The goals of these measurements are to assist MDSCC mission operations as the facility increasingly supports Ka-band missions, as well as to contribute to the development and improvement of International Telecommunications Union (ITU) models for prediction of communications systems performance within the Q-band through the Aldo Paraboni Experiment. Herein, we provide an overview of the system design, characterization, and plan of operations which commenced at the MDSCC beginning in March 2017.

Radiowave Propagation↗