Search NASA⌕ Search

SEARCH · Search NASA

Results for “proposal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Multiscale modeling to evaluate proposed space-based Doppler lidar sampling strategies

A proposal has been made to place a pulsed Doppler lidar on a space platform (Huffaker, et al., 1980; Emmitt, 1982) in a low earth orbit (200 to 800 km) to measure the atmospheric winds with a spatial resolution commensurate with the current continental rawinsonde network density - i.e., 300 to 500 km resolution. In the case of the space-based doppler lidar, the full range of space scales applies. Single shot pulses with dimensions of 10 x 1000 meters are used to sample areas 100,000 x 100,000 meters to resolved mass flow structure with wavelength of 1 million meters. Simulation studies, therefore, require an equally broad range of atmospheric models. A general circulation model is appropriate to answer questions regarding the impact of a global wind measuring system upon synoptic forecasts. Since the nominal resolution of the spacebased system is expected to be a few 100's of kilometers, then a numerical model with mesoscale dynamics is required. The meaning of an average Doppler shift within a laser pulse volume must be evaluated with models of turbulent/convective scale motions and aerosol gradients. Examples of how models on all these scales have been applied in an ongoing simulation study are presented. In particular, the uncertainties in a mesoscale wind estimate are separated into those arising from pulse scale variances and those due to sample distribution within a prescribed resolution volume. Trade-offs between accuracy and representativeness are discussed in terms of the model results.

Emmitt, G. D.↗
NASA NTRS1987

On the potential impact of the newly proposed quality factors on space radiation protection

The recently proposed changes in the defined quality factor hold great potential for easing some of the protection requirements from electrons and protons in the near-Earth environment. At the same time, the high Linear Energy Transfer (LET) components play an even more important role which must be further evaluated. Several recommendations are made which need to be addressed before these new quality factors can be implemented into space radiation potection practice.

Wilson, John W.↗
NASA NTRS1986

A proposal for adopting a standard coordinate system for defining atmospheric nomenclature for the giant planets

Although the albedo of specific belts and zones varies as a function of time, there is evidence that wind maxima may be fixed in latitude. Before considering a standard notation for wind jets, it is necessary to establish a coordinate system within which the nomenclature would be defined. Traditionally, the BAA has used planetographic latitudes; however, this system is based not only on an accurate determination of the polar diameter but also on the assumption that the equipotential surfaces can be represented by biaxial ellipsoids. The International Astronomical Union strives to adopt unambiguous nomenclature that will be universally acceptable. It is proposed that planetocentric coordinates be utilized and that a standardized value of the ratio of the polar diameter to the equatorial diameter be established for each planet to facilitate transformation into planetographic coordinates.

Beebe, R.↗
NASA NTRS1987

Proposed upgrade of the Deep Space Network research and development station

Continued exploration of the solar system will require continued evolution of capabilities to support deep space communication and navigation. That evolution will rely, as it has in the past, on the development, demonstration, and field testing of communication and navigation technologies. The existing Deep Space Network (DSN) research and development station, DSS 13, at the Venus site, Goldstone, California was instrumental in those prior developments. However, the present antenna is no longer able to provide the necessary support for technology. The 26 meter antenna has good performance at S-band, fair performance at X-band, but is unusable at the anticipated Ka-band. It is not suitable for conversion to beam waveguides, and is not usable as a test bed for demonstrating high efficiency because of structural pliancy. Additionally, its size and age are increasingly a liability in demonstrations. A 34 meter beam waveguide version of the existing DSN high efficiency (HEF) antennas was proposed for FY-88 Construction of Facilities budget. The antenna is to be built at the Venus site, adjacent to the old antenna, and serve as the DSN research and development antenna through the end of the century.

Smith, Joel G.↗
NASA NTRS1987

Experimental evaluation of two turning vane designs for fan drive corner of 0.1-scale model of NASA Lewis Research Center's proposed altitude wind tunnel

Two turning vane designs were experimentally evaluated for corner 2 of a 0.1 scale model of the NASA Lewis Research Center's proposed Altitude Wind Tunnel (AWT). Corner 2 contained a simulated shaft fairing for a fan drive system to be located downstream of the corner. The corner was tested with a bellmouth inlet followed by a 0.1 scale model of the crossleg diffuser designed to connect corners 1 and 2 of the AWT. Vane A was a controlled-diffusion airfoil shape; vane B was a circular-arc airfoil shape. The A vanes were tested in several arrangements which included the resetting of the vane angle by -5 degrees or the removal of the outer vane. The lowest total pressure loss for vane A configuration was obtained at the negative reset angle. The loss coefficient increased slightly with the Mach number, ranging from 0.165 to 0.175 with a loss coefficient of 0.170 at the inlet design Mach number of 0.24. Removal of the outer vane did not alter the loss. Vane B loss coefficients were essentially the same as those for the reset vane A configurations. The crossleg diffuser loss coefficient was 0.018 at the inlet design Mach number of 0.33.

Boldman, Donald R.↗
NASA NTRS1987

Detailed flow surveys of turning vanes designed for a 0.1-scale model of NASA Lewis Research Center's proposed altitude wind tunnel

Detailed flow surveys downstream of the corner turning vanes and downstream of the fan inlet guide vanes have been obtained in a 0.1-scale model of the NASA Lewis Research Center's proposed Altitude Wind Tunnel. Two turning vane designs were evaluated in both corners 1 and 2 (the corners between the test section and the drive fan). Vane A was a controlled-diffusion airfoil and vane B was a circular-arc airfoil. At given flows the turning vane wakes were surveyed to determine the vane pressure losses. For both corners the vane A turning vane configuration gave lower losses than the vane B configuration in the regions where the flow regime should be representative of two-dimensional flow. For both vane sets the vane loss coefficient increased rapidly near the walls.

Moore, Royce D.↗
NASA NTRS1986

Microgravity crystallization of macromolecules: An interim report and proposal for continued research

An initial investigation exploring the effects of gravity on the crystallization of macromolecular systems has been completed. Monodisperse poly(ethylene), molecular weight 48,000 was melted and recrystallized under gravitational conditions: 0, 1, and 2 g. No correlations to gravitational environment were noted for the 20 C/min melt, as monitored with a photodensitometer system. However, post-crystallization testing of the recrystallized samples revealed thicker samples with more regions of large, well defined spherulites for the zero gravity crystallization environment. The results of the post-crystallization analysis have been reviewed and the results related to nucleation concerns. Finally, birefringence data, consistent with, but not explained by, the nucleation scenarios is detailed, and further investigations are proposed.

Goldberg, Benjamin E.↗
NASA NTRS1987

Experimental determination of the stable-trim attitudes of two proposed, general-purpose, heat-source modules

Ballistic range tests have been conducted to determine the aerodynamically stable trim attitudes of two proposed general-purpose heat-source module configurations. Tests were conducted at speeds of 4.6 km/sec for the concept module, and at both 4.6 km/sec and 1.4 km/sec for the MOD II. Test results indicated that both configurations were stable when launched in the face-on attitude. When launched in the side-on attitude, the MOD II configuration was found to be stable, while tests of the concept module did not give definitive results.

Kruse, Robert L.↗
NASA NTRS1986

The proposed NRAO millimeter array and its use for solar studies

A brief summary is given of the proposed National Radio Astronomy Observatory (NRAO) Millimeter Array discussed at a workshop held in Green Bank, W. Va., September 30 to October 2, 1985. A brief description of the solar studies that can be made with such an array is provided.

Kundu, Mukul R.↗
NASA NTRS1987

Experimental evaluation of blockage ratio and plenum evacuation system flow effects on pressure distribution for bodies of revolution in 0.1 scale model test section of NASA Lewis Research Center's proposed altitude wind tunnel

An experimental investigation was conducted in the slotted test section of the 0.1-scale model of the proposed Altitude Wind Tunnel to evaluate wall interference effects at tunnel Mach numbers from 0.70 to 0.95 on bodies of revolution with blockage rates of 0.43, 3, 6, and 12 percent. The amount of flow that had to be removed from the plenum chamber (which surrounded the slotted test section) by the plenum evacuation system (PES) to eliminate wall interference effects was determined. The effectiveness of tunnel reentry flaps in removing flow from the plenum chamber was examined. The 0.43-percent blockage model was the only one free of wall interference effects with no PES flow. Surface pressures on the forward part of the other models were greater than interference-free results and were not influenced by PES flow. Interference-free results were achieved on the aft part of the 3- and 6-percent blockage models with the proper amount of PES flow. The required PES flow was substantially reduced by opening the reentry flaps.

Burley, Richard R.↗
NASA NTRS1986

A proposed comet nucleus penetrator for the Comet Rendezvous Asteroid Flyby mission

The importance of the study of comets has led NASA to plan a mission to rendezvous with comet Tempel 2 in 1997. Critical to the understanding of comets will be measurements of the nucleus material to determine its elemental and isotopic composition, its mechanical properties, and its thermal state and properties. this paper describes a proposal for a Comet Nucleus Penetrator to accomplish these measurement goals. The Comet Nucleus Penetrator will implant instruments into the comet's nucleus beneath a probable volatile-depleted surface mantle into material more representative of the bulk composition of the nucleus.

Swenson, B. L.↗
NASA NTRS1986

Proposal for superstructure based high efficiency photovoltaics

A novel class of cascade structures is proposed which features multijunction upper subcells, referred to as superstructure high-efficiency photovoltaics (SHEPs). The additional junctions enhance spectral response and improve radiation tolerance by reducing bulk recombination losses. This is important because ternary III-V alloys, which tend to have short minority-carrier diffusion lengths, are the only viable materials for the high-bandgap upper subcells required for cascade solar cells. Realistic simulations of AlGaAs SHEPs show that one-sun AM0 efficiencies in excess of 26 percent are possible.

Wagner, M.↗
NASA NTRS1986

Flight evaluation of height response characteristics for the hover bob-up task and comparison with proposed criteria

The CH-47B variable-stability helicopter was used to evaluate a range of height-response configurations while performing a precision hover bob-up task. The purpose of the study was to assess the validity of results obtained in previous ground-based and in-flight simulations in the context of a precision bob-up task and to provide additional flight data for inclusion in revisions to specifications for helicopter handling qualities. Height response characteristics were implemented using explicit model-following techniques, and the resulting CH-47B dynamics were validated using time-domain and frequency-domain data-analysis methods. The tests complemented the previous investigations by providing detailed pilot comments and ratings, and performance and control-utilization data that relate exclusively to the hover bob-up task. The results are compared with those from previous investigations and with new criteria that have been proposed for handling qualities requirements for helicopters.

Hindson, W. S.↗
NASA NTRS1986

A proposed architecture for a satellite-based mobile communications network - The lowest three layers

Architecture for a commercial mobile satellite network is proposed. The mobile satellite system (MSS) is composed of a network management center, mobile terminals, base stations, and gateways; the functions of each component are described. The satellite is a 'bent pipe' that performs frequency translations, and it has multiple UHF beams. The development of the MSS design based on the seven-layer open system interconnection model is examined. Consideration is given to the functions of the physical, data link, and network layers and the integrated adaptive mobile access protocol.

Yan, T. Y.↗
NASA NTRS1987

Proposed mechanistic model to simulate transfer line cool-down process using liquid helium

This paper proposes a mathematical model to simulate the cool-down behavior of a warm transfer line using liquid helium (including He II) in a microgravity environment. The thermal-hydraulic characteristics of different possible flow regimes which may occur during the cool-down process are discussed. Correlations for predicting the heat and momentum transfer rates in each flow regime are presented.

Ng, Y. S.↗
NASA NTRS1987

Proposed CMG momentum management scheme for space station

A discrete control moment gyro (CMG) momentum management scheme (MMS) applicable to spacecraft with principal axes misalignments, such as the proposed NASA dual keel space station, is presented in this paper. The objective of the MMS is to minmize CMG angular momentum storage requirements for maintaining the space station near local vertical in the presence of environmental disturbances. It utilizes available environmental disturbances, namely gravity gradient torques, to minimize CMG momentum storage. The MMS is executed once per orbit and generates a commanded torque equilibrium attitude (TEA) time history which consists of a yaw, pitch and roll angle command profile. Although the algorithm is called only once per orbit to compute the TEA profile, the space station will maneuver several discrete times each orbit.

Bishop, L. R.↗
NASA NTRS1987

Experimental Evaluation of Turning Vane Designs for High-speed and Coupled Fan-drive Corners of 0.1-scale Model of NASA Lewis Research Center's Proposed Altitude Wind Tunnel

Two turning vane designs were experimentally evaluated for the fan-drive corner (corner 2) coupled to an upstream diffuser and the high-speed corner (corner 1) of the 0.1 scale model of NASA Lewis Research Center's proposed Altitude Wind Tunnel. For corner 2 both a controlled-diffusion vane design (vane A4) and a circular-arc vane design (vane B) were studied. The corner 2 total pressure loss coefficient was about 0.12 with either vane design. This was about 25 percent less loss than when corner 2 was tested alone. Although the vane A4 design has the advantage of 20 percent fewer vanes than the vane B design, its vane shape is more complex. The effects of simulated inlet flow distortion on the overall losses for corner 1 or 2 were small.

Gelder, Thomas F.↗
NASA NTRS1987

Proposed reference models for ozone

Ozone reference models are proposed here similar to the Keating and Young (1985) models which were prepared for the new COSPAR International Reference Atmosphere. This paper updates tables provided in the Keating and Young ozone model, giving improved monthly zonal mean total column ozone in 10 deg latitude increments, improved monthly zonal mean ozone volume mixing ratios (ppmv) from 20 to 0.003 mb in 10 deg latitude increments, and conversion tables providing ozone vertical structure in other units. Also, a new table is provided giving ozone vertical structure as a function of altitude (from 25 to 80 km), latitude, and month. The models are based on measurements from six contemporary satellite instruments.

Keating, G. M.↗