Search NASA⌕ Search

SEARCH · Search NASA

Results for “prototype specifications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Mu2e Tracker's Gas Connection

This report is a resume of the activities in which I was involved during my internship at Fermilab Particle Physics and Accelerator Laboratory in Batavia. The experiment at whom my work is connected is the Mu2e experiment, in particular I worked in the Tracker’s group. The main task of my training program was to design a gas service connection that take place in a small volume located between the Tracker and the Calorimeter (two main elements that constitute the detector). During the initial phase I was lightly trained about the experiment and its general design, then I was supervised on my specific task. All the work aimed to reach a design solution that could meet all the BCs, in this view, a reasonable solution was prototyped and tested. The tests performed at Lab 3 were another fundamental aspect of my experience at Fermilab closing the circle of studying, modelling, machining and testing. I want to thank primarily Aseet Mukherjee and Mete Yucel that were my supervisors, they constantly spent their time attempting to create a favourable workplace, suggesting, listening and meeting all the requests in short time, working for them was absolutely like "working with them", without their help achieve the result would been greatly harder. Giuseppe Gallo deserve a special thanks too for revising mostly of my work and being always available for support. I had also the chance to share my work during the "Weekly Tracker’s Meetings" dealing with other bright engineers and physicists, between them I really appreciate George Ginter, Russel Rucinski, Yujing Sun and Waqar Ahmed. I want also to express my gratitude to Simone Donati, Giorgio Bellettini and Emanuela Barzi that make this unique experience possible organizing this program for decades. Thanks to my Mother, my Father, my Brother, my Nephew, my uncle Damiano and my friend Simona always near, never stopping to dream with me.

43 PARTICLE ACCELERATORS↗

Surrogate materials options for single phase conjugate heat transfer scaled experiments of light water reactors at prototypical conditions

In light water reactors, the conjugate heat transfer between heating rods and cooling water is a problem of paramount importance that has been studied for decades. The design of nuclear reactors depends on correlations for the heat transfer coefficient between heat source and coolant, and experimental studies are needed to improve the existing correlations, develop new ones that are adapted to the new reactors designed and their components, and develop high fidelity turbulence models. No studies have been carried out yet at prototypical conditions where the liquid velocity and temperature fields are measured, because of the difficulty to find instruments that can resist the extreme operating conditions. Here, two surrogate gases, sulfur hexafluoride and cryogenic nitrogen, are proposed to conduct conjugate heat transfer experiments at prototypical conditions. Surrogate structural materials are also investigated to favorably reproduce conjugate heat transfer for steady and transient operations. The operating conditions are now less demanding than high-pressure, high-temperature water, which allows the deployment of many proven diagnostics. To demonstrate these surrogate materials, a sample scaling analysis is applied to one pressurized water reactor fuel rod under axial flow and vibrations, showing a very close matching between prototype and model for the conjugate heat transfer. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

GeMini: The Next-Generation Mechanically-Cooled Germanium Spectrometer

The next-generation mechanically-cooled germanium spectrometer has been developed. GeMini (MINIature GErmanium spectrometer) has been designed to bring high-resolution gamma-ray spectroscopy to a range of demanding field environments. Intended applications include short-notice inspections, border patrol, port monitoring and emergency response, where positive nuclide identification of radioactive materials is required but power and liquid cryogen are not easily available. GeMini weighs 2.75 kg for the basic instrument and 4.5 kg for the full instrument including user interface and ruggedized hermetic packaging. It is very low power allowing it to operate for 10 hours on a single set of rechargeable batteries. This instrument employs technology adapted from the gamma-ray spectrometer currently flying on NASA's Mercury MESSENGER spacecraft. Specifically, infrared shielding techniques allow for a vast reduction of thermal load. This in turn allows for a smaller, lighter-weight design, well-suited for a hand-held instrument. Three working prototypes have been built and tested in the lab. The measured energy resolution is 3 keV fwhm at 662 keV gamma-rays. This paper will focus on the design and performance of the instrument.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The CMS Phase-2 Fast Beam Condition Monitor prototype test with beam

The Fast Beam Condition Monitor (FBCM) is a standalone luminometer for the High Luminosity LHC (HL-LHC) program of the CMS Experiment at CERN. The detector is under development and features a new, radiation-hard, front-end application-specific integrated circuit (ASIC) designed for beam monitoring applications. The achieved timing resolution of a few nanoseconds enables the measurement of both the luminosity and the beam-induced background. The ASIC, called FBCM23, features six channels with adjustable shaping times, enabling in-field fine-tuning. Each ASIC channel outputs a single binary asynchronous signal encoding time-of-arrival and time-over-threshold information. The FBCM is based on silicon-pad sensors, with two sensor designs presently being considered. This paper presents the results of tests of the FBCM detector prototype using both types of silicon sensors with hadron, muon, and electron beams. Irradiated FBCM23 ASICs and silicon-pad sensors were also tested to simulate the expected conditions near the end of the detector's lifetime in the HL-LHC radiation environment. Based on test results, direct bonding between the sensor and ASIC was chosen, and an optimal bias voltage and ASIC threshold for FBCM operation were proposed. The current design of the front-end test board was validated following the beam test and is now being used for the first front-end module, which is expected to be produced in summer 2025. These results represent a major step forward in validating the FBCM concept, first version of the firmware and establishing a reliable design path for the final detector.

Beam-line instrumentation (beam position and profi↗

Interactions of aquatic animals with the ORPC OCGen® in Cobscook Bay, Maine: Monitoring behavior change and assessing the probability of encounter with a deployed MHK device

Commercial viability of the marine hydrokinetic (MHK) energy industry is contingent on numerous and diverse factors. A major factor is the effects deployed devices have on animals. This factor is multi-faceted since it is dependent on the availability of appropriate scientific approaches to detect these effects. One of the animal groups with overlapping distributions of MHK devices are fishes. As such, individual fish behavior is likely to be influenced by the presence and operation of MHK devices. Depending on the scale of deployment there are implications for changes to essential fish habitat and effects that can be explored during deployment of a single device yet most changes are likely to be realized when multiple devices are deployed over large areas. It is not only important to document these effects and examine the need for mitigation, but also determine whether the methods involved can be used within the economic constraints of this nascent industry. The results presented in this report benefit the MHK industry by providing transferrable environmental monitoring approaches for MHK projects, specifically related to the interactions between static and dynamic tidal turbines and fish. In addition, some of the data can be used to generalize conditions (e.g., the temporal periodicity of fish presence in tidal regions and probability of fish encountering a device) at other MHK sites with similar physical conditions and fish assemblages. Ocean Renewable Power Company, LLC (ORPC) deployed and tested a prototype OCGen® tidal module in Cobscook Bay, Maine, in the summer of 2014. University of Maine researchers proposed an approach to inform other researchers, regulators, and industry members of the effects of this deployment on fish. While the approach was specifically applied to the OCGen® module, results are applicable to other pilot projects and inform future array deployments. Research funded under this grant allowed us to quantify fish presence as well as individual and group-level behavior changes in the presence of the deployed OCGen® module along with a bottom support frame from a previously deployed device (TidGen®). Specific objectives associated with fish behavior changes were (1) continuation of two long-term datasets: (a) stationary down-looking hydroacoustic dataset near an MHK device (group-level) and (b) stationary side-looking hydroacoustics near the bottom-support frame of a previously deployed MHK device (individual-level); (2) application of new processing methods to down-looking hydroacoustic datasets to improve fish species identification (group-level); and (3) development of an encounter probability model using data on fish abundance, vertical distribution, and behavior.

16 TIDAL AND WAVE POWER↗

Experimental validation of a method characterizing bow tie filters in CT scanners using a real-time dose probe

Purpose: Beam-shaping or ''bow tie'' (BT) filters are used to spatially modulate the x-ray beam in a CT scanner, but the conventional method of step-and-shoot measurement to characterize a beam's profile is tedious and time-consuming. The theory for characterization of bow tie relative attenuation (COBRA) method, which relies on a real-time dosimeter to address the issues of conventional measurement techniques, was previously demonstrated using computer simulations. In this study, the feasibility of the COBRA theory is further validated experimentally through the employment of a prototype real-time radiation meter and a known BT filter. Methods: The COBRA method consisted of four basic steps: (1) The probe was placed at the edge of a scanner's field of view; (2) a real-time signal train was collected as the scanner's gantry rotated with the x-ray beam on; (3) the signal train, without a BT filter, was modeled using peak values measured in the signal train of step 2; and (4) the relative attenuation of the BT filter was estimated from filtered and unfiltered data sets. The prototype probe was first verified to have an isotropic and linear response to incident x-rays. The COBRA method was then tested on a dedicated breast CT scanner with a custom-designed BT filter and compared to the conventional step-and-shoot characterization of the BT filter. Using basis decomposition of dual energy signal data, the thickness of the filter was estimated and compared to the BT filter's manufacturing specifications. The COBRA method was also demonstrated with a clinical whole body CT scanner using the body BT filter. The relative attenuation was calculated at four discrete x-ray tube potentials and used to estimate the thickness of the BT filter. Results: The prototype probe was found to have a linear and isotropic response to x-rays. The relative attenuation produced from the COBRA method fell within the error of the relative attenuation measured with the step-and-shoot method. The BT filter thickness estimates resulting from the dual energy scans on the breast CT system were equivalent to the manufacturing specifications. The clinical CT evaluation produced data conceptually similar to previous computer simulations and plausible relative attenuation profiles were observed. Conclusions: The COBRA method is a fast and accurate method for BT filter characterization, which requires a simple experimental setup in a clinical environment. Because of the ease of data acquisition, multienergy scans can be acquired which allow characterization of the BT filter thickness.

60 APPLIED LIFE SCIENCES↗

30-kW Maintenance-Free Stirling Engine for High-Performance Dish Concentrating Solar

This final report summarizes the final results of the 30-kW Maintenance-Free Stirling Engine for High-Performance Dish Concentrating Solar project performed by Infinia Corporation for the U.S. Department of Energy under contract DE-FC36-08GO18032 during the project period of March 1, 2008 – March 31, 2012. Over the course of the project, Infinia Corporation achieved substantial progress in the design, fabrication, assembly, testing and evaluation of a 30-kW multi-cylinder, free-piston Stirling engine (MCFPSE) prototype. In this effort, prior MCFPSE conceptual design approaches were adapted for the development of a 30-kW design, thereby producing a cohesive design package and detailed performance specifications. Numerical analysis using the Stirling Engine Analysis and Optimization Code (SAGE) was completed culminating in the selection of a fully balanced 6-cylinder configuration composed of two 3-cylinder engine modules. The model was refined throughout the program to include all wall conduction losses, piston and rod seal losses, appendix, shuttle and pumping losses, and piston radiation loss to closely represent the real system. Performance mapping of the engine was then completed using the detailed model. Based on knowledge and experience from its existing commercial products, and using the results from the extensive numerical modeling discussed above, Infinia successfully fabricated, assembled and tested two sets of 30-kW engine modules. One of these configurations was driven by an external power supply and operated as a cooler in order to verify the mechanical integrity of the system. In the engine configuration, induction heaters provided the energy to the heater head to operate the engine. Considerable effort was expended on correcting problems associated with contact and rubbing of internal components, identification and subsequent elimination of internal leaks, and undesirable amounts of piston bias. Many details concerning the fabrication and testing efforts are considered proprietary. As a result, those findings are not disclosed herein but rather can be found in proprietary reports supplied to the DOE on a periodic basis. The prototype did not fully demonstrate performance nor did it realize the projected cost targets. Furthermore, the basis of the mechanical and electrical architecture of the 30-kW multi-cylinder prototype design is now at least two generations old. Alternatively, Infinia’s 8-kW Bonneville generator, which was successfully demonstrated in April 2012, and is slated to enter commercial production in late 2013, offers immediate benefits of lower cost and significantly higher power density such that the generator will likely meet DOE’s Sunshot LCOE target goal of $\$$0.07-0.10/kWh by 2015 and $\$$0.05-0.07/kWh by 2020. Therefore, the design of a 30-kW Stirling engine as disclosed in the project will not be pursued further. However, Infinia remains keenly interested in developing higher power Stirling machines in the future based on the new Bonneville mechanical design.

14 SOLAR ENERGY↗

The development programme of cathodes and electron guns for the Hollow Electron Lenses of the High Luminosity LHC project1

The High Luminosity LHC project (HL-LHC) foresees the construction and installation of important new equipment to increase the performance of the LHC machine. The Hollow Electron Lens (HEL) is a promising system to control the beam halo. It improves the beam collimation system of the HL-LHC and mitigates possible equipment damage in case of failure scenarios from halo losses. The halo can store up to 30 MJ energy. The specifications for this new device are quite demanding. The source, an electron gun with an annular shaped cathode, has to deliver a current up to 5 A. This is five times higher than the current in the existing electron lenses in Fermi and Brookhaven national laboratories. This note describes the programme carried out to design and test high-perveance guns equipped with two types of high-performance scandate cathodes. The size of the final gun is now considerably smaller than the one of the first prototype, allowing a reduction of diameter and cost of the superconducting magnet system used to steer the electron beam. The tests carried out at FNAL, BVERI and BJUT demonstrated that the developed cathodes fulfil the specifications and can supply a 5 A fully Space Charge Limited (SCL) current.

43 PARTICLE ACCELERATORS↗

Tethered from the Head and from the Tail: The Structure of Hydroxyl-Functionalized Ionic Liquids

Ionic liquids with special functionalities are synthesized with the specific purpose of creating new patterns of interaction in the condensed phase. This Letter discusses the case of alcohol-functionalized ILs, the so-called HFILs, which are part of the larger cohort of task-specific ionic liquids. We find that this small chemical modification can cause massive changes in the liquid landscape when the cationic tails are longer. For prototypical ionic liquids, larger alkyl tails act as separators of charge networks, but in the case of HFILs these become physical charge network linkers. The OH functionality adds a large repertoire of interactions and correlations that were mostly unavailable to traditional ILs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Near-Isotropic Performance of Intrinsically Anisotropic High-Temperature Superconducting Tapes Due to Self-Assembled Nanostructures

We report material and operating parameter conditions where prototype high-temperature superconducting tape conductors exhibit in-plane critical current characteristics that are essentially field orientation independent. This phenomenon is observed for specific magnetic field intensities that depend on the operating temperature and in materials having strong flux pinning by extended nanoscale structures aligned roughly along the crystalline c-axis. The effect can be described by a simple model for the field dependence of critical current density, generalized for anisotropic electronic response. This description may provide insight into means to fine tune the material properties for nearly isotropic performance characteristics at a preferred field and temperature.

36 MATERIALS SCIENCE↗

Varying topological properties of two-dimensional honeycomb lattices composed of endohedral fullerenes

Honeycomb lattices (HLs) have been widely explored for realization of massless Dirac quasiparticles and intriguing topological properties in both the quantum and classical regimes, with elemental and artificial atoms as the corresponding building blocks. Here we provide a demonstration showing that when the fullerene molecules of C 28 are used as prototypical building blocks, stable two-dimensional (2D) HLs can also be achieved, with the structural, electronic, and topological properties tuned via proper atom encapsulation. Specifically, whereas a closely packed structure is preferred for the C 28 lattice, honeycomb structures with different spacial symmetries are energetically favored for both the Bi@C 28 and In@C 28 endohedral fullerenes. In particular, Bi@C 28 -HL is revealed to be a quantum spin Hall insulator because of strong spin-orbit coupling effects in the f molecular orbitals, while In@C 28 -HL is a quantum valley Hall insulator resulting from mirror symmetry breaking. Here, the present study offers superatom-based platforms for realizing quantum spin Hall and quantum valley Hall effects in 2D systems, with distinctly enhanced tunability and robustness against atomic-scale imperfections.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropic, multiband, and strong-coupling superconductivity of the Pb 0.64 ⁢Bi 0.36 alloy

This paper presents theoretical and experimental studies on the superconductivity of Pb ⁢0.64 ⁢Bi 0.36 alloy, which is a prototype of strongly coupled superconductors and exhibits one of the strongest coupling under ambient pressure among the materials studied so far. The critical temperature, the specific heat in the superconducting state, and the magnetic critical fields are experimentally determined. Deviations from the single-gap s-wave BCS-like behavior are observed. The electronic structure, phonons, and electron-phonon interactions are analyzed in relation to the metallic Pb, explaining why the Pb-Bi alloy exhibits such a large value of the electron-phonon coupling parameter λ ≃ 2. Superconductivity is studied using the isotropic Eliashberg formalism as well as the anisotropic density functional theory for superconductors. Here, we find that while Pb is a two-gap superconductor with well-defined separate superconducting gaps, in the Pb-Bi alloy an overlapped three-gap-like structure is formed with a strong anisotropy. Furthermore, the chemical disorder, inherent to this alloy, leads to strong electron scattering, which is found to reduce the critical temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlating the properties of amorphous silicon with its flexibility volume

For metallic glasses, “flexibility volume” has recently been introduced as a property-revealing indicator of the structural state the glass is in. This parameter incorporates the atomic volume and the vibrational mean-square displacement, to combine both static structure and dynamics information. Flexibility volume was shown to quantitatively correlate with the properties of metallic glasses. However, it remains to be examined if this parameter is useful for other types of glasses with bonding characteristics, atomic packing structures, as well as properties that are distinctly different from metallic glasses. In this paper, we tackle this issue through systematic molecular-dynamics simulations of amorphous silicon (a-Si) models produced with different cooling rates, as a-Si is a prototypical covalently bonded network glass whose structure and properties cannot be characterized using structural parameters such as free volume used for metallic and polymeric glasses. Specifically, we demonstrate a quantitative prediction of the shear modulus of a-Si from the flexibility for atomic motion. This flexibility volume descriptor, when evaluated on the atomic scale, is shown to also correlate well with local packing, as well as with the propensity for thermal relaxations and shear transformations, providing a metric to map out and explain the structural and mechanical heterogeneity in the amorphous material. Overall, this case study of a model of covalently bonded network a-Si, together with our earlier demonstration for metallic glasses, points to the universality of flexibility volume as an indicator of the structure state to link with properties, applicable across amorphous materials with different chemical bonding and atomic packing structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Performance of a second generation of the Fermilab Constant Fraction Discriminator ASIC for time-stamping long-strip AC-LGAD sensors.

We present the design and performance characterization results of the second generation of the novel Fermilab Constant Fraction Discriminator ASIC (FCFD) developed to readout AC-coupled low gain avalanche detector (AC-LGAD) sensors. This study presents the performance of the ASIC which was optimized specifically for reading out strip AC-LGAD sensors designed for ePIC experiment at EiC. Performance was measured using charge injection and particle beams with prototype AC-LGAD sensors wirebonded to the FCFD ASIC.

Apresyan, A.↗

Sci-Sat AM: Radiation Dosimetry and Practical Therapy Solutions - 10: Towards LET detection: A study on the effects of scintillator doping

Purpose: In radiotherapy, the amount of radiation delivered is determined by optimizing the amount of absorbed dose to the tumor. Dose does not always correlate well with the actual biological effects of radiation. This work seeks to validate the LET-dependence of doped plastic scintillators for use in a radiation beam quality (LET) detector. Methods: The LET spectrum ([Φ]) can be resolved knowing the measured signals of uniquely LET-dependent detectors, [S], and the response of each LET-dependent detector to specific LETs ([R]), through the relation [Φ]=[S][R]{sup −1}. Plastic scintillator response is intrinsically LET dependent and can be varied via doping. Initial prototype consists of plastic scintillator and glass taper coupled to an optical fiber; components are housed in black acrylic, reducing effect of ambient light. In order to determine [R], the light response matrix, GEANT4.10.1 Monte Carlo (MC) was used. To validate MC, measurements were done using high energy electrons (9,12,15MeV) and orthovoltage x-rays (100,250kV); scintillator signal was normalized to dose measured simultaneously. Results: Stopping power was varied by changing particle type/energy; measurements indicated that as stopping power increased from 1.9 to 6.6MeV/cm, detector response increased by 263% (+/−29.2%) for 5%Pb-doped scintillator (155% in MC); 52% (+/−7.8%) increase observed when undoped scintillator was used (49% in MC). 5%Pb-doped discrepancy (100kV x-rays) is being investigated. Conclusions: This work validates that doping effects LET/energy response of scintillators; an effect that can be utilized for construction of an LET detector.

60 APPLIED LIFE SCIENCES↗

Ride Pingo to Transit

In this project, we developed an on-demand microtransit first- and last-mile service. To integrate the service with fixed-route transit, we developed a feature called Transit Connect that prioritized riders’ on-time arrival at the transit station over other service requirements. We first prototyped service and related algorithms in a simulated environment, and then piloted the service in the city of Kent, Washington. Our algorithm incorporates request-specific hard drop-off deadlines to ensure timely arrivals for transit transfers. In the pilot, these constraints were obtained from GTFS Realtime data to accurately determine the schedule of the transit and the location of the stations. This approach introduced the ability to accept or decline new requests based on the timing of transit connections for these new requests and connection status of onboarding customers. The pilot (called “Ride Pingo to Transit”) deployed a fleet of three 14-person vans, ran from September 2021 to March 2023, and served a total of 21,329 trips. Transit Connect was offered for drop-offs at both Kent Station and the Kent Valley hub. In total, 2,844 such trips were completed. This dataset was collected from our pilot, which includes the following: - Requests: List of all trip requests, including those that were actually served and those not materialized. - Fleet: Daily vehicle service logs. - Service details: Daily vehicle stop logs (boarding and alighting). - Trip types: First mile, last mile, or point-to-point. ![pingo to transit](pingo-to-transit.jpg)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Cummins R-SOFC System Development

The overall purpose of this project was to reduce the Reversible-Solid Oxide Fuel Cell (R-SOFC) system cost by developing two technologies, an improved cell design and the incorporation of an ejector in the fuel recycle loop instead of a blower. A Simulink model of the baseline SOFC system was developed and calibrated with experimental test data. The R-SOFC system model was built by integrating GT Suite developed models of the steam generation components into the baseline Simulink SOFC system model. The ability to run the stack in SOEC operating mode was also added to the model. The system model was used to explore the ability of the R-SOFC system to meet operational constraints on Steam/Carbon ratio and H2 concentration on the fuel side electrode. A CFD ejector model was developed and used to explore a range of ejector design parameters, leading to the final ejector design that was prototyped for testing. A prototype steam ejector was first tested in a laboratory environment using room temperature air. The steam ejector was subsequently tested using the full hot recycle loop with all relevant heat exchangers and steam generation components. The test conditions utilized temperatures, pressures, and flow rates expected in an R-SOFC application. Throughout the experimental testing work, ejector performance test data was used to improve and then validate the CFD ejector model. A CFD cell model was developed and used to optimize thermal gradients, voltage, and cost of a new cell substrate design. A CFD comparison of co-flow and cross-flow cell designs informed the decision to use a co-flow design for the new cell substrate. Multiple rounds of CFD simulation were used to improve the cell design to minimize the variation in air and fuel distribution across cell channels and to minimize the variation in air and fuel distribution across different cells in the stack. A few prototypes of the new cell substrate design were produced and validated in a laboratory environment by thermally spraying and verifying that they met established manufacturing specifications. The cell manufacturing process was adjusted in order to bring these metrics within acceptable tolerances. Cummins’ internal calculations show that the new cell design reduces cost ~50% compared to the baseline cell, while the ejector + superheater/boiler concept reduces cost of the recycle loop by ~40%. The impact of these cost reductions on the cost of producing H2 will depend on the specific system where they are applied. Therefore, a Techno-Economic Analysis was completed using system cost as a variable, and showing how the NREL Current and Future system costs translate into H2 production cost.

Henrichsen, Lars↗

Coupled SAM/Griffin Model of a Reference Pebble Bed High-Temperature Gas Cooled Reactor for Multi-Physics Simulations

An effort has been dedicated to developing a reference model for multi-physics coupled simulation of the pebble bed high-temperature gas-cooled reactor (PB-HTGR) with SAM and Griffin computer codes for safety analysis and licensing purpose. The reference problem of a prototypical reactor design serves as the foundation for the U.S. NRC (Nuclear Regulatory Commission) to verify the adequacy of computer codes and evaluation models for specific reactor types. In this work, a SAM model of the HTR-PM reactor has been developed based on publicly available design information and the multi-dimensional Pronghorn model developed by Idaho National Laboratory. The SAM HTR-PM model includes a multi-dimensional core region and 0- D/1-D fluid components. Additionally, a simplified air RCCS loop is modeled for decay heat removal. The Griffin model is based on a recent work by Idaho National Laboratory. The coupling between the models is achieved through the MOOSE MultiApp system. Both steady-state and transient scenarios were simulated to demonstrate the coupled model’s capability for multi-physics simulations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗