Search NASA⌕ Search

SEARCH · Search NASA

Results for “random composite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Bicomponent Block Copolymers Derived from One or More Random Copolymers as an Alternative Route to Controllable Phase Behavior

Block copolymers have been extensively studied due to their ability to spontaneously self-organize into a wide variety of morphologies that are valuable in energy-, medical- and conservation-related (nano)technologies. While the phase behavior of bicomponent diblock and triblock copolymers is conventionally governed by temperature and individual block masses, we demonstrate that their phase behavior can alternatively be controlled through the use of blocks with random monomer sequencing. Block random copolymers (BRCs), i.e., diblock copolymers wherein one or both blocks is a random copolymer comprised of A and B repeat units, have been synthesized, and their phase behavior, expressed in terms of the order-disorder transition (ODT), has been investigated. Our results establish that, depending on the block composition contrast and molecular weight, BRCs can microphase-separate. We also report that the predicted ODT can be generated at relatively constant molecular weight and temperature with these new soft materials. This sequence-controlled synthetic strategy is extended to thermoplastic elastomeric triblock copolymers differing in chemistry and possessing a random-copolymer midblock.

Ashraf, Arman R.↗

Scalable thin graphene oxide membranes enabled by polydopamine gutter layer

Two-dimensional (2D) nanosheets have been widely used to fabricate thin-film composite membranes for dye desalination. However, they often need to be thick to mitigate the defects resulting from their random stacking and rough support surface. Herein, bio-adhesive polydopamine (PDA) is used as a gutter layer to prepare graphene oxide (GO)-based membranes by improving the adhesion between the GO and porous support and providing a smooth surface to form thin, highly selective layers. For example, the PDA priming reduces the GO layer thickness by 57 %, from 447 to 190 nm, while achieving similar dye desalination properties. The effect of the dopamine concentration, exposure time, and GO layer thickness on the membrane structure and desalination performance are thoroughly investigated using various techniques, such as scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), and x-ray diffraction (XRD). The PDA gutter layer is also applied for hollow fiber membranes, achieving water permeance of 79 L m -2 h −1 bar−1 and rejection of ∼99 % for Direct red 80. The membranes were challenged by simulated dye/salt mixtures to elucidate the complicated effect of the compositions on the desalination performance. Furthermore, this study unveils a new avenue to improve separation performance and large-scale manufacturability of 2D material-based membranes.

Dye desalination↗

Geochemistry and Multiomics Data Differentiate Streams in Pennsylvania Based on Unconventional Oil and Gas Activity

Unconventional oil and gas (UOG) extraction is increasing exponentially around the world, as new technological advances have provided cost-effective methods to extract hard-to-reach hydrocarbons. While UOG has increased the energy output of some countries, past research indicates potential impacts in nearby stream ecosystems as measured by geochemical and microbial markers. Here, we utilized a robust data set that combines 16S rRNA gene amplicon sequencing (DNA), metatranscriptomics (RNA), geochemistry, and trace element analyses to establish the impact of UOG activity in 21 sites in northern Pennsylvania. These data were also used to design predictive machine learning models to determine the UOG impact on streams. We identified multiple biomarkers of UOG activity and contributors of antimicrobial resistance within the order Burkholderiales. Furthermore, we identified expressed antimicrobial resistance genes, land coverage, geochemistry, and specific microbes as strong predictors of UOG status. Of the predictive models constructed (n = 30), 15 had accuracies higher than expected by chance and area under the curve values above 0.70. The supervised random forest models with the highest accuracy were constructed with 16S rRNA gene profiles, metatranscriptomics active microbial composition, metatranscriptomics active antimicrobial resistance genes, land coverage, and geochemistry (n = 23). The models identified the most important features within those data sets for classifying UOG status. These findings identified specific shifts in gene presence and expression, as well as geochemical measures, that can be used to build robust models to identify impacts of UOG development.

16S rRNA↗

The influence of age and gender on skin-associated microbial communities in urban and rural human populations

Differences in the bacterial community structure associated with 7 skin sites in 71 healthy people over five days showed significant correlations with age, gender, physical skin parameters, and whether participants lived in urban or rural locations in the same city. While body site explained the majority of the variance in bacterial community structure, the composition of the skin-associated bacterial communities were predominantly influenced by whether the participants were living in an urban or rural environment, with a significantly greater relative abundance of Trabulsiella in urban populations. Adults maintained greater overall microbial diversity than adolescents or the elderly, while the intragroup variation among the elderly and rural populations was significantly greater. Lastly, skin-associated bacterial community structure and composition could predict whether a sample came from an urban or a rural resident ~ 5x greater than random.

59 BASIC BIOLOGICAL SCIENCES↗

Miscanthus x giganteus yield in a REpeated PLAnting Year (REPLAY) experiment across three sites in Iowa, USA.

Research objectives were to study nitrogen (N) fertilization and age effect on Miscanthus x giganteus (mxg) yield and their interaction. In addition, we studied how establishment conditions affected mxg yield response to N fertilization. This is the first repeated planting year experiment conducted on perennial bioenergy grasses. Data showed that mxg yield response to N fertilization was highly variable. Establishment effects were an important driver of this variability and caused significant changes on the magnitude and direction of one-year-old stands’ response to N fertilization. With repeated planting we compared yield gain from first to second year of growth of different single starts. Yield gain of each single start was different within and between sites. This site-specific response suggests that important biases could be introduced when comparing results across studies if repeated planting is not utilized. Biomass from mxg plots was sampled annually in winter or early spring after multiple days with freezing temperatures (Table 1). At each harvest, two 1-m2 quadrats per plot were collected by hand at 0.10 m above the soil surface and weighed. In 2016 and 2018, we used a composite subsample to estimate dry matter content. In 2017, the dry weight subsamples were made of 15 randomly collected stems from each plot. Subsamples were weighed in the field and dried to constant mass at 60 °C in a forced air drier. The final mass was recorded and dry matter content was calculated for each plot.

Agricultural Science↗

Synergistic ablation does not affect atrophy or altered myosin heavy chain expression in the non-weight bearing soleus muscle

The purpose of this study was to investigate whether the soleus muscle undergoes atrophy and alterations in myosin heavy chain (MHC) composition during non-weight bearing in the absence of synergists. Thirty-two female rats were randomly assigned to four groups: control (C), synergistic ablation (ABL) of the gastrocnemius and plantaris muscles to overload the soleus muscle, hindlimb suspension (HLS), or a combination of synergistic ablation and hindlimb suspension (HLS-ABL). After 28 days of hindlimb suspension, soleus atrophy was more pronounced in HLS (58%) than in HLS-ABL (43%) rats. Compared to C rats, non-weight bearing decreased mixed and myofibrillar protein contents and Type I MHC 49%, 45%, and 7%, respectively, in HLS animals. In addition, de novo expression of fast Type IIx and Type IIb MHC (5% and 2%, respectively) was observed in HLS animals. Similarly, when compared to C rats, mixed and myofibrillar protein contents and Type I MHC decreased 43%, 46%, and 4%, respectively, in HLS-ABL animals. Also, de novo expression of Type IIx (4%) and IIb (1%) MHC was observed. Collectively, these data indicate that the loss of muscle protein and Type I MHC, and the de novo expression of Type IIx and Type IIb MHC in the rat soleus occur independently of the presence of synergists during non-weight bearing. Furthermore, these results confirm the contention that soleus mass and MHC expression are highly sensitive to alterations in mechanical load.

NASA Center ARC↗

Equation of State and High Pressure Irreversible Amorphization in Y[subscript 3] Fe[subscript 5]O[subscript 12]

The change of crystal structure in yttrium iron garnet Y{sub 3}Fe{sub 5}O{sub 12} was studied at room temperature at high pressures up to {approx}55 GPa by the x-ray diffraction technique in diamond anvil cells. At a pressure of about {approx}50 GPa, a drastic change in the x-ray diffraction pattern was observed indicating the transition into an amorphouslike state. When the pressure was increased, the bulk modulus of YIG was found to be 193 {+-} 4 GPa. It was also found that the amorphous state was retained after decompression down to ambient pressure. From the shape of x-ray patterns in the 'amorphous' phase, it was concluded that the local atomic structure consists of iron-oxygen FeO{sub 6} octahedral complexes with disordered orientations of local axis and of randomly arranged others ion fragments with the overall Y{sub 3}Fe{sub 5}O{sub 12} composition. For the amorphous phase, it was evaluated that the bulk modulus of FeO{sub 6} octahedral complexes is about 260 GPa.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis, characterization and composition-dependent magnetic properties of LaFe{sub 1-x}Cr{sub x}O{sub 3} system (0{<=}x{<=}1)

Hydrothermal synthesis, characterization and magnetic properties of a series of ABO{sub 3}-perovskites LaFe{sub 1-x}Cr{sub x}O{sub 3} (0{<=}x{<=}1) are reported. The alkalinity in initial reaction mixtures plays a critical role in controlling the designed stoichiometry of the final compositions. Their magnetic properties are strongly dependent on the compositions and a maximum magnetic moment is found for the sample at x=0.5. Weak ferromagnetic interaction observed for the samples from x=0 to 0.9 arises from the presence of Fe-O-Fe antisymmetric exchange and Fe-O-Cr superexchange interaction. The weak ferromagnetism as well as the linear variation of the lattice parameters implies the possible random distribution of Fe and Cr ions in B sites of the perovskites. The evolution of magnetic ordering transition temperatures has a close relationship with substituent ratios, for the competition of antiferromagnetism and ferromagnetism. The saturated magnetic moment shows a great improvement compared with that for the samples synthesized by solid state method. - Graphical abstract: A series of perovskites LaFe{sub 1-x}Cr{sub x}O{sub 3} (0{<=}x{<=}1) were synthesized by mild hydrothermal method and characterized by their weak ferromagnetism due to the possible random distribution of Fe and Cr ions in B sites of the perovskites. The magnetic property of the perovskites is strongly dependent upon the compositions and a maximum magnetic moment is found for LaFe{sub 1-x}Cr{sub x}O{sub 3} at x=0.5.

36 MATERIALS SCIENCE↗

Fine-scale landscape characteristics, vegetation composition, and snowmelt timing control phenological heterogeneity across low-Arctic tundra landscapes in Western Alaska

The Arctic is warming at over twice the rate of the rest of the Earth, resulting in significant changes in vegetation seasonality that regulates annual carbon, water, and energy fluxes. However, a crucial knowledge gap exists regarding the intricate interplay among climate, permafrost, and vegetation that generates high phenology variability across extensive tundra landscapes. This oversight has led to significant discrepancies in phenological patterns observed across warming experiments, long-term ecological observations, and satellite and modeling studies, undermining our ability to understand and forecast plant responses to climate change in the Arctic. To address this problem, we assessed plant phenology across three low-Arctic tundra landscapes on the Seward Peninsula, Alaska, using a combination of in-situ phenocam observations and high-resolution PlanetScope CubeSat data. We examined the patterns and drivers of phenological diversity across the landscape by (1) quantifying phenological diversity among dominant plant function types (PFTs) and (2) modeling the interrelations between plant phenology and fine-scale landscape features, such as topography, snowmelt, and vegetation. Our findings reveal that both spring and fall phenology varied significantly across Arctic PFTs, accounting for about 25%–44% and 34%–59% of the landscape-scale variation in the start of spring [SOS] and start of fall [SOF], respectively. Deciduous tall shrubs (e.g. alder and willow) had a later SOS (~7 d behind the mean of other PFTs), but completed leaf expansion (within 2 weeks) considerably faster compared to other PFTs. We modeled the landscape-scale variation in SOS and SOF using Random Forest, which showed that plant phenology can be accurately captured by a suite of variables related to vegetation composition, topographic characteristics, and snowmelt timing (variance explained: 53%–68% for SOS and 59%–82% for SOF). Notably, snowmelt timing was a crucial determinant of SOS, a factor often neglected in most spring phenology models. Our study highlights the impact of fine-scale vegetation composition, snow seasonality, and landscape features on tundra phenological heterogeneity. Improved understanding of such considerable intra-site phenological variability and associated proximate controls across extensive Arctic landscapes offers critical insights for representation of tundra phenology in process models and associated impact assessments with climate change.

54 ENVIRONMENTAL SCIENCES↗

Electron transport in unipolar InGaN/GaN multiple quantum well structures grown by NH{sub 3} molecular beam epitaxy

Unipolar-light emitting diode like structures were grown by NH{sub 3} molecular beam epitaxy on c plane (0001) GaN on sapphire templates. Studies were performed to experimentally examine the effect of random alloy fluctuations on electron transport through quantum well active regions. These unipolar structures served as a test vehicle to test our 2D model of the effect of compositional fluctuations on polarization-induced barriers. Variables that were systematically studied included varying quantum well number from 0 to 5, well thickness of 1.5 nm, 3 nm, and 4.5 nm, and well compositions of In{sub 0.14}Ga{sub 0.86}N and In{sub 0.19}Ga{sub 0.81}N. Diode-like current voltage behavior was clearly observed due to the polarization-induced conduction band barrier in the quantum well region. Increasing quantum well width and number were shown to have a significant impact on increasing the turn-on voltage of each device. Temperature dependent IV measurements clearly revealed the dominant effect of thermionic behavior for temperatures from room temperature and above. Atom probe tomography was used to directly analyze parameters of the alloy fluctuations in the quantum wells including amplitude and length scale of compositional variation. A drift diffusion Schrödinger Poisson method accounting for two dimensional indium fluctuations (both in the growth direction and within the wells) was used to correctly model the turn-on voltages of the devices as compared to traditional 1D simulation models.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of certain control-system nonlinearities on stability and pointing of an attached double-gimbal experiment package in presence of random crew-motion disturbances

The effects of two types of control-system nonlinearities, sensor deadband and actuator breakout torque, on the pointing capability of a Apollo Telescope Mount (ATM) double-gimbal experiment isolation and control system are investigated. A composite structural model of a flexible experiment package connected through frictionless double gimbals to a flexible carrier vehicle is used for this investigation. Contributions of the primary carrier control system to experiment pointing are neglected. Pointing errors onboard the experiment package due to random crew-motion input into the carrier vehicle are computed. A stability investigation is performed to verify control-system stability with nominal nonlinearities and gains. Indications are that there is no stability problem due to the nonlinearities. A nonlinearity sensitivity study is carried out to determine the effects on pointing accuracy. Its results indicate that nominal ATM control system nonlinearities limit the pointing accuracy to approximately 0.4 arc second in the presence of crew motion. Methods of reducing the error to less than 0.1 arc second are discussed.

Shaughnessy, J. D.↗

X-ray diffraction and extended X-ray absorption fine structure study of epitaxial mixed ternary bixbyite Pr{sub x}Y{sub 2-x}O{sub 3} (x = 0-2) films on Si (111)

Ternary single crystalline bixbyite Pr{sub x}Y{sub 2-x}O{sub 3} films over the full stoichiometry range (x = 0-2) have been epitaxially grown on Si (111) with tailored electronic and crystallographic structure. In this work, we present a detailed study of their local atomic environment by extended X-ray absorption fine structure at both Y K and Pr L{sub III} edges, in combination with complementary high resolution x-ray diffraction measurements. The local structure exhibits systematic variations as a function of the film composition. The cation coordination in the second and third coordination shells changes with composition and is equal to the average concentration, implying that the Pr{sub x}Y{sub 2-x}O{sub 3} films are indeed fully mixed and have a local bixbyite structure with random atomic-scale ordering. A clear deviation from the virtual crystal approximation for the cation-oxygen bond lengths is detected. This demonstrates that the observed Vegard's law for the lattice variation as a function of composition is based microscopically on a more complex scheme related to local structural distortions which accommodate the different cation-oxygen bond lengths.

36 MATERIALS SCIENCE↗

Contact Versus Non-Contact Measurement of a Helicopter Main Rotor Composite Blade

The dynamic characterization of lightweight structures is particularly complex as the impact of the weight of sensors and instrumentation (cables, mounting of exciters...) can distort the results. Varying mass loading or constraint effects between partial measurements may determine several errors on the final conclusions. Frequency shifts can lead to erroneous interpretations of the dynamics parameters. Typically these errors remain limited to a few percent. Inconsistent data sets however can result in major processing errors, with all related consequences towards applications based on the consistency assumption, such as global modal parameter identification, model-based damage detection and FRF-based matrix inversion in substructuring, load identification and transfer path analysis [1]. This paper addresses the subject of accuracy in the context of the measurement of the dynamic properties of a particular lightweight structure. It presents a comprehensive comparative study between the use of accelerometer, laser vibrometer (scanning LDV) and PU-probe (acoustic particle velocity and pressure) measurements to measure the structural responses, with as final aim the comparison of modal model quality assessment. The object of the investigation is a composite material blade from the main rotor of a helicopter. The presented results are part of an extensive test campaign performed with application of SIMO, MIMO, random and harmonic excitation, and the use of the mentioned contact and non-contact measurement techniques. The advantages and disadvantages of the applied instrumentation are discussed. Presented are real-life measurement problems related to the different set up conditions. Finally an analysis of estimated models is made in view of assessing the applicability of the various measurement approaches for successful fault detection based on modal parameters observation as well as in uncertain non-deterministic numerical model updating.

36 MATERIALS SCIENCE↗

Disturbance differentially affects alpha and beta diversity of ants in tallgrass prairies

Abstract Biodiversity conservation requires understanding how disturbance influences biodiversity patterns at multiple spatial scales. Because the total diversity of species within a given region (γ diversity) is influenced by both local diversity (α diversity) and dissimilarity in community composition (β diversity), understanding disturbance effects on both components of diversity is essential, especially if disturbance impacts α and β diversities differently. In this three‐year study, we examined how a disturbance (annual harvesting of grasslands) and environmental gradients in the proportion of sand locally, habitat size, and landscape diversity influenced the abundance and α and β diversities of ants within tallgrass prairie habitat in Wisconsin. We used a null‐model approach to examine how harvest and environmental factors influence β diversity. Following three years of treatments, we found that ant abundance was greater in harvested sites compared to control sites and ant abundance was positively correlated with soil sandiness. We also found that α diversity was lower in harvested sites compared to control sites and none of the measured environmental gradients influenced α diversity. The effects of harvest on α‐diversity patterns may have been mediated through the competitive interactions of the two dominant ant species ( Formica montana and Lasius neoniger ). In contrast, β diversity (after adjusting for random effects and changes to α diversity) was higher in harvest sites compared to control sites, and variability in community composition was largely driven by the occurrence of rare species. The proportion of sand in the local habitat and habitat size positively influenced β diversity suggesting that community dissimilarity was due in part to environmental filtering and the size of species pools. Because biomass harvest had contrasting effects on ant α and β diversities, trade‐offs in maintaining α vs. β diversity might need to be considered in land management and conservation efforts.

Kim, Tania N.↗

Raman scattering by the E{sub 2h} and A{sub 1}(LO) phonons of In{sub x}Ga{sub 1-x}N epilayers (0.25 < x < 0.75) grown by molecular beam epitaxy

We use Raman scattering to investigate the composition behavior of the E{sub 2h} and A{sub 1}(LO) phonons of In{sub x}Ga{sub 1-x}N and to evaluate the role of lateral compositional fluctuations and in-depth strain/composition gradients on the frequency of the A{sub 1}(LO) bands. For this purpose, we have performed visible and ultraviolet Raman measurements on a set of high-quality epilayers grown by molecular beam epitaxy with In contents over a wide composition range (0.25 < x < 0.75). While the as-measured A{sub 1}(LO) frequency values strongly deviate from the linear dispersion predicted by the modified random-element isodisplacement (MREI) model, we show that the strain-corrected A{sub 1}(LO) frequencies are qualitatively in good agreement with the expected linear dependence. In contrast, we find that the strain-corrected E{sub 2h} frequencies exhibit a bowing in relation to the linear behavior predicted by the MREI model. Such bowing should be taken into account to evaluate the composition or the strain state of InGaN material from the E{sub 2h} peak frequencies. We show that in-depth strain/composition gradients and selective resonance excitation effects have a strong impact on the frequency of the A{sub 1}(LO) mode, making very difficult the use of this mode to evaluate the strain state or the composition of InGaN material.

36 MATERIALS SCIENCE↗

Can We Reconcile the TA Excess and Hotspot with Auger Observations?

The Telescope Array (TA) shows a 20° hotspot as well as an excess of ultra-high-energy cosmic-rays (UHECRs) above 50 EeV when compared with the Auger spectrum. We consider the possibility that both the TA excess and hotspot are due to a dominant source in the northern sky. We carry out detailed simulations of UHECR propagation in both the intergalactic medium and the Galaxy, using different values for the intergalactic magnetic field. We consider two general classes of sources: transients and steady, adopting a mixed UHECR composition that is consistent with the one found by Auger. The spatial location of the sources is drawn randomly. We generate Auger-like and TA-like data sets from which we determine the spectrum, the sky maps, and the level of anisotropy. We find that, while steady sources are favored over transients, it is unlikely to account for all the currently available observational data. While we reproduce fairly well the Auger spectrum for the vast majority of the simulated data sets, most of the simulated data sets with a spectrum compatible with that of TA (at most a few percent depending on density model tested) show a much stronger anisotropy than the one observed. We find that the rare cases in which both the spectrum and the anisotropy are consistent require a steady source within ∼10 Mpc, to account for the flux excess, and a strong extragalactic magnetic field ∼10 nG, to reduce the excessive anisotropy.

79 ASTRONOMY AND ASTROPHYSICS↗

Igneous inclusions from ordinary chondrites: High temperature cumulates and a shock melt

We report microprobe, instrumental neutron activation analysis, and radiochemical neutron activation analysis data for three large igneous inclusions in the Yamato (Y-)75097, Y-793241, and Y-794046 ordinary chondrites. The inclusions in the first two chondrites are troctolitic cumulates that have undergone appreciable reactions with their hosts either during emplacement and/or cooling. Olivine-spinel Fe-Mg exchange pairs in these two inclusions record equilibration temperatures of about 710 C, and these temperatures are similar to those exhibited by mineral pairs in the Y-75097 and Y-793241 hosts. The inclusion in Y-794046 is texturally unique, consisting of fine-grained, randomly distributed olivines, coarse (approximately 2 mm) fascicular pyroxene laths, and angular pockets of maskelynite/plagioclase feldspar. The phase compositions are readily interpreted as having resulted from extremely rapid, essentially isochemical cooling to temperatures less than 1000 C of a melt with an initial temperature greater than 1670 C. We suggest that this igneous inclusion formed in-situ by shock.

Sack, Richard O.↗

Idealized textile composites for experimental/analytical correlation

Textile composites are fiber reinforced materials produced by weaving, braiding, knitting, or stitching. These materials offer possible reductions in manufacturing costs compared to conventional laminated composites. Thus, they are attractive candidate materials for aircraft structures. To date, numerous experimental studies have been performed to characterize the mechanical performance of specific textile architectures. Since many materials and architectures are of interest, there is a need for analytical models to predict the mechanical properties of a specific textile composite material. Models of varying sophistication have been proposed based on mechanics of materials, classical laminated plate theory, and the finite element method. These modeling approaches assume an idealized textile architecture and generally consider a single unit cell. Due to randomness of the textile architectures produced using conventional processing techniques, experimental data obtained has been of limited use for verifying the accuracy of these analytical approaches. This research is focused on fabricating woven textile composites with highly aligned and accurately placed fiber tows that closely represent the idealized architectures assumed in analytical models. These idealized textile composites have been fabricated with three types of layer nesting configurations: stacked, diagonal, and split-span. Compression testing results have identified strength variations as a function of nesting. Moire interferometry experiments are being used to determine localized deformations for detailed correlation with model predictions.

Adams, Daniel O.↗