Search NASA⌕ Search

SEARCH · Search NASA

Results for “rectifiers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Higher Ion Selectivity with Lower Energy Usage Promoted by Electro-osmotic Flow in the Transport through Conical Nanopores

The tradeoff between selectivity and throughput presents fundamental challenges to improve desalination and charge storage, salinity gradient-based energy harvesting, memory device/circuit development, and so forth. The well-known ion-current rectification and the recently resolved time-dependent transport hysteresis in conical nanopores or asymmetric nanointerfaces offer new opportunities for the selective transport of matter. This report shows that electro-osmotic flow (EOF) is an overlooked factor that increases ion selectivity while maintaining enhanced transport throughput in rectified nanoscale electrokinetic transport. The increased selectivity originates primarily from the suppression of anion flux by the fluid flow in the opposite direction under the applied electrical field. By solving the Poisson and Nernst–Planck (PNP) equations without and with coupled Navier–Stokes (PNP–NS) equations, the EOF effects on cation and anion transport are unequivocally revealed in asymmetric nanopipettes. The flux of cations and anions as well as the transference number and flow velocity are elucidated using the models and boundary conditions validated by previous experiments. A dimensionless parameter, radius over the Debye length, reveals optimal ion selectivity and energy cost at intermediate ion concentrations and nanopore sizes, up to hundreds of millimolars and tens of nanometers under time-dependent potential stimulus. Furthermore, the fundamental insights into EOF at nanointerfaces suggest new routes/strategies for better separation, analysis, and energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Underlying Mechanisms of Hot Carrier-Driven Reactivity on Bimetallic Nanostructures

Bimetallic nanostructures exhibit unique catalytic activity and selectivity that is not evident for their monometallic analogs. Such nanostructures contain plasmonic metals, such as gold or silver, that afford highly efficient harvesting of electromagnetic radiation and its conversion into hot carriers. These highly energetic species are transferred to the catalytic metal sub-component of the bimetallic nanostructure, where a large spectrum of chemical reactions may be catalyzed. The strength of the electric field and the interplay between catalytic and plasmonic metals at the nanoscale are thus critically important for the catalytic activity of bimetallic nanostructures. In this study, we investigate the relationship between the catalytic activity and local electric fields sustained on the surface of gold-palladium (Au@PdNPs) and gold-platinum (Au@PtNPs) nanoplates using tip-enhanced Raman spectroscopy (TERS). We image the spatially varying magnitudes of rectified (DC) local electric fields on the surface of these nanostructures and compare them to fields sustained on the surface of monometallic nanoplates. We find substantially larger electric field magnitudes on Au@PdNPs and Au@PtNPs as compared to their monometallic analogs. These findings suggest that catalytic efficiency of bimetallic nanostructures may be mediated and potentially tuned through precise control of electric fields sustained on their surfaces.

Li, Zhandong↗

Selective Ion Enrichment and Charge Storage through Transport Hysteresis in Conical Nanopipettes

Greater selectivity and controls in the ion transport dynamics are essential in fields such as charge storage, separation, energy storage and conversion, neuromorphic computing and learning, electrochemistry, to name a few. Mechanistic insights into the intriguing hysteresis effects in the rectified electrokinetic transport through single conical nanopipettes are unveiled by combining time-resolved electroanalytical experiments with numeric simulation. Cations as counterions for surface charges are found to dominate not just the through-nanopore flux but also the hysteresis charges, that is, the net enriched or expelled charges during the transport process. Built on our earlier report on the through-nanopore ion flux dominated by counterions for surface charges, the “trapped ions” or hysteresis charges are analyzed herein. Cation selectivity is almost 100% in the hysteresis charges during the potential scans in low conductivity states driven by the combined applied and intrinsic surface electrical fields. Surprisingly, the cation selectivity in the total hysteresis charges remains high at 70–80% over a wide bulk concentration range in the high conductivity (HC) states, where higher ionic strength due to ion enrichment would decrease electrostatistic effects and thus ion selectivity. The retained high selectivity at HC is explained by the competition effects of electroosmotic flow against the co-ion migration. Furthermore, the respective cation and anion portions in the total hysteresis charges over a wide range of ionic strength and measurement conditions provide generalizable strategies for improvements in both transport throughput and selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical, Photoelectrochemical, and Photoelectron Spectroscopic Investigation of the Interfacial Transport and Energetics of Amorphous TiO 2 /Si Heterojunctions

Solid-state electrical, photoelectrochemical, and photoelectron spectroscopic techniques have been used to characterize the behavior and electronic structure of interfaces between n-Si, n + -Si, or p + -Si surfaces and amorphous coatings of TiO 2 formed using atomic-layer deposition. Photoelectrochemical measurements of n-Si/TiO 2 /Ni interfaces in contact with a series of one-electron, electrochemically reversible redox systems indicated that the n-Si/TiO 2 /Ni structure acted as a buried junction whose photovoltage was independent of the formal potential of the contacting electrolyte. Solid-state current–voltage analysis indicated that the built-in voltage of the n-Si/TiO 2 heterojunction was ~0.7 V, with an effective Richardson constant ~1/100th of the value of typical Si/metal Schottky barriers. Furthermore, x-ray photoelectron spectroscopic data allowed formulation of energy band-diagrams for the n-Si/TiO 2 , n + -Si/TiO 2 , and p + -Si/TiO 2 interfaces. The XPS data were consistent with the rectifying behavior confirmed for amorphous TiO 2 interfaces with n-Si and n + -Si surfaces and with an ohmic contact at the interface between amorphous TiO 2 and p + -Si.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoinduced Electron Transfer from ZrOCo Binuclear Light Absorber to Pyridine Elucidated by Transient Optical and Infrared Spectroscopy

All-inorganic heterobinculear units can be excited to a metal-to-metal charge transfer (MMCT) state by visible and ultraviolet light and form the core of multicomponent artificial photosystems that rely on conjugated molecular wires to transmit electrons and holes across ultrathin silica separation membranes to catalytic sites. To understand electron transfer from a heterobinuclear unit to an organic molecule, model systems consisting of pyridine interacting with Zr IV OCo II or Tisup>IV OCo II sites on silica nanoparticles were assembled and spectroscopically characterized. Transient optical absorption spectroscopy combined with infrared analysis revealed that visible light excitation of assemblies in which pyridine interacts with the Zr center of the ZrOCo unit results in sub-10 ns separation by electron transfer to the organic moiety. Rapid-scan FT-IR spectroscopy supported by density functional theory confirmed the identity of the pyridine radical anion charge-separated state. This state shows a lifetime of 220 (±60) ms prior to complete recovery of the initial state, suggesting spin crossover along the electron transfer path. No hole transfer from excited Zr IV OCo II → Zr III OCo III to pyridine is observed. The rectifying charge transfer behavior is an important design aspect for developing efficient artificial photosystems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cooperative Transport in a Multi-Particle, Multi-Dimensional Flashing Ratchet

In this work, random and undirected forces are rectified in biological and synthetic systems using ratcheting mechanisms, which employ periodic asymmetric potentials and nonequilibrium conditions to produce useful transport. The density of motors or transported particles is known to strongly affect the nature and efficacy of transport in biological systems, as well as in synthetic ratchets and active swimmer systems. While experimental ratchet implementations normally employ potentials varying in two dimensions (2D), the role of the density of interacting particles in such a system has not been modeled. Prompted by experimental observations and building upon previous simulations, this paper describes the ratcheting process of interacting particles in a 2D flashing ratchet, examined using classical simulations. Increased particle density is found to allow effective ratcheting at higher driving frequencies, compared to the low-density or non-interacting case. High densities also produce a new ratcheting mode at low driving frequencies, based on independent trajectories of high kinetic-energy particles, more than doubling transport at low frequencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron Spin Polarization and Rectification Driven by Chiral Perylene Diimide-Based Nanodonuts

The chirality-induced spin selectivity (CISS) effect allows thin-film layers of chiral conjugated molecules to function as spin filters at ambient temperature. Through solvent-modulated dropcasting of chiral l- and d-perylene diimide (PDI) monomeric building blocks, two types of aggregate morphologies, nanofibers and nanodonuts, may be realized. Spin-diode behavior is evidenced in the nanodonut structures. Stacked PDI units, which form the conjugated core of these nanostructures, dominate the nanodonut–Au electrode contact; in contrast, the AFM tip contacts largely the high-resistance solubilizing alkyl chains of the chiral monomers that form these nanodonuts. Current–voltage responses of the nanodonuts, measured by magnetic conductive AFM (mC-AFM), demonstrate substantial spin polarizations as well as spin current rectification ratios (>10) that exceed the magnitudes of those determined to date for other chiral nanoscale systems. Furthermore, these results underscore the potential for chiral nanostructures, featuring asymmetric molecular junctions, to enable CISS-based nanoscale spin current rectifiers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crucial role of nuclear dynamics for electron injection in a dye–semiconductor complex

In this study, we investigate the electron injection from a terrylene-based chromophore to the TiO 2 semiconductor bridged by a recently proposed phenyl-amide-phenyl molecular rectifier. The mechanism of electron transfer is studied by means of quantum dynamics simulations using an extended Hückel Hamiltonian. It is found that the inclusion of the nuclear motion is necessary to observe the photoinduced electron transfer. In particular, the fluctuations of the dihedral angle between the terrylene and the phenyl ring modulate the localization and thus the electronic coupling between the donor and acceptor states involved in the injection process. The electron propagation shows characteristic oscillatory features that correlate with interatomic distance fluctuations in the bridge, which are associated with the vibrational modes driving the process. The understanding of such effects is important for the design of functional dyes with optimal injection and rectification properties.

36 MATERIALS SCIENCE↗

Automated discovery and construction of surface phase diagrams using machine learning

Surface phase diagrams are necessary for understanding surface chemistry in electrochemical catalysis, where a range of adsorbates and coverages exist at varying applied potentials. These diagrams are typically constructed using intuition, which risks missing complex coverages and configurations at potentials of interest. More accurate cluster expansion methods are often difficult to implement quickly for new surfaces. We adopt a machine learning approach to rectify both issues. Using a Gaussian process regression model, the free energy of all possible adsorbate coverages for surfaces is predicted for a finite number of adsorption sites. Our result demonstrates a rational, simple, and systematic approach for generating accurate free-energy diagrams with reduced computational resources. Finally, the Pourbaix diagram for the IrO 2 (110) surface (with nine coverages from fully hydrogenated to fully oxygenated surfaces) is reconstructed using just 20 electronic structure relaxations, compared to approximately 90 using typical search methods. Similar efficiency is demonstrated for the MoS 2 surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polarization of gold in nanopores leads to ion current rectification

Biomimetic nanopores with rectifying properties are relevant components of ionic switches, ionic circuits, and biological sensors. Rectification indicates that currents for voltages of one polarity are higher than currents for voltages of the opposite polarity. Ion current rectification requires the presence of surface charges on the pore walls, achieved either by the attachment of charged groups or in multielectrode systems by applying voltage to integrated gate electrodes. Here we present a simpler concept for introducing surface charges via polarization of a thin layer of Au present at one entrance of a silicon nitride nanopore. In an electric field applied by two electrodes placed in bulk solution on both sides of the membrane, the Au layer polarizes such that excess positive charge locally concentrates at one end and negative charge concentrates at the other end. Consequently, a junction is formed between zones with enhanced anion and cation concentrations in the solution adjacent to the Au layer. This bipolar double layer together with enhanced cation concentration in a negatively charged silicon nitride nanopore leads to voltage-controlled surface-charge patterns and ion current rectification. The experimental findings are supported by numerical modeling that confirm modulation of ionic concentrations by the Au layer and ion current rectification even in low-aspect ratio nanopores. Lastly, our findings enable a new strategy for creating ionic circuits with diodes and transistors.

36 MATERIALS SCIENCE↗

Extreme Levitation of Colloidal Particles in Response to Oscillatory Electric Fields

Micron-scale colloidal particles suspended in electrolyte solutions have been shown to exhibit a distinct bifurcation in their average height above the electrode in response to oscillatory electric fields. Recent work by Hashemi Amrei et al. (Phys. Rev. Lett.,2018,121, 185504) revealed that a steady, long-range asymmetric rectified electric field (AREF) is formed when an oscillatory potential is applied to an electrolyte with unequal ionic mobilities. In this work, we use confocal microscopy to test the hypothesis that a force balance between gravity and an AREF-induced electrophoretic force is responsible for the particle height bifurcation observed in some electrolytes. We demonstrate that at sufficiently low frequencies, particles suspended in electrolytes with large ionic mobility mismatches exhibit extreme levitation away from the electrode surface (up to 50 particle diameters). This levitation height scales approximately as the inverse square root of the frequency for both NaOH and KOH solutions. Moreover, larger particles levitate smaller distances, while the magnitude of the applied field has little effect above a threshold voltage. A force balance between the AREF-induced electrophoresis and gravity reveals saddle node bifurcations in the levitation height with respect to the frequency, voltage, and particle size, yielding stable fixed points above the electrode that accord with the experimental observations. These results point toward a low-energy, non-fouling method for concentrating colloids at specific locations far from the electrodes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Nonreciprocal Supercurrents in a Field-Free Graphene Josephson Triode

Superconducting diodes are proposed non-reciprocal circuit elements that should exhibit nondissipative transport in one direction while being resistive in the opposite direction. Multiple examples of such devices have emerged in the past couple of years, however their efficiency is typically limited, and most of them require magnetic field to function. Here we present a device achieving efficiencies upwards of 90% while operating at zero field. Our samples consist of a network of three graphene Josephson junctions linked by a common superconducting island, to which we refer as a Josephson triode. The triode is tuned by applying a control current to one of the contacts, thereby breaking the time-reversal symmetry of the current flow. The triode’s utility is demonstrated by rectifying a small (tens of nA amplitude) applied square wave. Finally, we speculate that devices of this type could be realistically employed in the modern quantum circuits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Introduction of Interfacial Charges to Black Phosphorus for a Family of Planar Devices

The capabilities to tune the conduction properties of materials by doping or electric fields are essential for the design of electronic devices. However, in two-dimensional materials substitutional doping has been achieved in only a few systems, such as Nb substitutional doping in MoS 2 . Surface charge transfer is still one of the popular ways to control whether the conduction is dominated by holes or electrons. Here, we demonstrate that a capping layer of cross-linked poly(methyl methacrylate) modifies the potential in a black phosphorus (BP) layer so that conduction in the absence of an external electric field is dominated by electrons, rather than holes. Using this technique to form adjoining regions dominated by hole and electron conduction, a family of novel planar devices, such as BP-gated diodes, BP bidirectional rectifier, and BP logic inverters, can be fabricated. The devices are potentially useful for electronic applications, including rectification and switching.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Powerful Organic Molecular Oxidants and Reductants Enable Ambipolar Injection in a Large-Gap Organic Homojunction Diode

Doping has proven to be a critical tool for enhancing the performance of organic semiconductors in devices like organic light-emitting diodes. However, the challenge in working with high-ionization-energy (IE) organic semiconductors is to find p-dopants with correspondingly high electron affinity (EA) that will improve the conductivity and charge carrier transport in a film. Here, we use an oxidant that has been recently recognized to be a very strong p-type dopant, hexacyano-1,2,3-trimethylene-cyclopropane (CN6-CP). The EA of CN6-CP has been previously estimated via cyclic voltammetry to be 5.87 eV, almost 300 meV higher than other known high-EA organic molecular oxidants. We measure the frontier orbitals of CN6-CP using ultraviolet and inverse photoemission spectroscopy techniques and confirm a high EA value of 5.88 eV in the condensed phase. The introduction of CN6-CP in a film of large-band-gap, large-IE phenyldi(pyren-1-yl)phosphine oxide (POPy 2 ) leads to a significant shift of the Fermi level toward the highest occupied molecular orbital and a 2 orders of magnitude increase in conductivity. Using CN6-CP and n-dopant (pentamethylcyclopentadienyl)(1,3,5-trimethylbenzene)ruthenium (RuCp*Mes)2, we fabricate a POPy 2 -based rectifying p–i–n homojunction diode with a 2.9 V built-in potential. Blue light emission is achieved under forward bias. Furthermore, this effect demonstrates the dopant-enabled hole injection from the CN6-CP-doped layer and electron injection from the (RuCp*Mes) 2 -doped layer in the diode.

36 MATERIALS SCIENCE↗

The Influence of Structure and Processing on the Behavior of TiO 2 Protective Layers for Stabilization of n-Si/TiO 2 /Ni Photoanodes for Water Oxidation

Light absorbers with moderate band gaps (1–2 eV) are required for high-efficiency solar fuels devices, but most semiconducting photoanodes undergo photocorrosion or passivation in aqueous solution. Amorphous TiO 2 deposited by atomic-layer deposition (ALD) onto various n-type emiconductors (Si,GaAs, GaP, and CdTe) and coated with thin films or islands of Ni produces efficient, stable photoanodes for water oxidation, with the TiO 2 films protecting the underlying semiconductor from photocorrosion in pH = 14 KOH(aq). The links between the electronic properties of the TiO 2 in these electrodes and the structure and energetic defect states of the material are not yet well-elucidated. We show herein that TiO 2 films with a variety of crystal structures and mid-gap defect state distributions, deposited using both ALD and sputtering, form rectifying junctions with n-Si and are highly conductive towards photogenerated carriers in n-Si/TiO 2 /Ni photoanodes. Moreover, the photovoltage of these electrodes can be modified by annealing the TiO 2 in reducing or oxidizing environments. All of the polycrystalline TiO 2 films with compact grain boundaries investigated herein protected the n-Si photoanodes against photocorrosion in pH = 14 KOH(aq). Hence, in these devices conduction through the TiO 2 layer is neither specific to a particular amorphous or crystalline structure nor determined wholly by a particular extrinsic dopant impurity. The coupled structural and energetic properties of TiO 2 , and potentially other protective oxides, can therefore be controlled to yield optimized photoelectrode performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterobinuclear Light Absorber Coupled to Molecular Wire for Charge Transport across Ultrathin Silica Membrane for Artificial Photosynthesis

Coupling of robust, all-inorganic heterobinuclear light absorbers to metal oxide catalysts for water oxidation across an ultrathin product-separating silica membrane requires charge transfer through organic molecular wires embedded in the silica. A synthetic approach for assembling the bimetallic units on the silica surface is introduced that is compatible with the presence of encapsulated organic molecules. Accurate selection and fine tuning of the concentration of embedded conducting wires are enabled by a two-step method consisting of surface attachment of a tripodal anchor, trimethoxysilyl aniline, followed by attachment of p-oligo(phenylene vinylene) through amide linkage. Each step of the assembly process was monitored and characterized by a combination of Fourier transform infrared, Fourier transform-Raman, and UV-vis spectroscopy techniques. Hole transfer was observed from transient Co III , formed by Ti IV OCo II → Ti III OCo III charge transfer excitation of the chromophore, to p-oligo(phenylene vinylene) molecule within the 8 ns width of the photolysis laser pulse by transient optical absorption spectroscopy of the wire radical cation. The rectifying property of the light absorber-wire assembly enabled by appropriate selection of redox potentials of metals and embedded wire obviates the need for a molecularly defined linkage between the components. Combined with the previously observed ultrafast hole injection from the embedded wires to Co oxide catalyst, the result implies visible-light-induced hole transfer from visible-light-excited binuclear light absorber to water oxidation catalyst across the silica separation membrane in a few nanoseconds or faster. Finally, demonstration and understanding of this interfacial charge-transfer step is critical for developing nanoscale core-shell architectures for complete photosynthetic cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of the Dielectric Constant on the Ionic Current Rectification of Bipolar Nanopores

In this paper, we investigate how the dielectric constant, ϵ, of an electrolyte solvent influences the current rectification characteristics of bipolar nanopores. It is well recognized that bipolar nanopores with two oppositely charged regions rectify current when exposed to an alternating electric potential difference. Here, we consider dilute electrolytes with NaCl only and with a mixture of NaCl and charged nanoparticles. These systems are studied using two levels of description, all-atom explicit water molecular dynamics (MD) simulations and coarse-grained implicit solvent MD simulations. The charge density and electric potential profiles and current-voltage relationship predicted by the implicit solvent simulations with ϵ = 11.3 show good agreement with the predictions from the explicit water simulations. Under nonequilibrium conditions, the predictions of the implicit solvent simulations with a dielectric constant closer to the one of bulk water are significantly different from the predictions obtained with the explicit water model. Further, these findings are closely aligned with experimental data on the dielectric constant of water when confined to nanometric spaces, which suggests that ϵ decreases significantly compared to its value in the bulk. Moreover, the largest electric current rectification is observed in systems containing nanoparticles when ϵ = 78.8. Using enhanced sampling, we have shown that this larger rectification arises from the presence of a significantly deeper minimum in the free energy of the system with a larger ϵ, and when a negative voltage bias is applied. Since implicit solvent models and mean-field continuum theories are often used to design Janus membranes based on bipolar nanopores, this work highlights the importance of properly accounting for the effects of confinement on the dielectric constant of the electrolyte solvent. The results presented here indicate that the dielectric constant in implicit solvent simulations may be used as an adjustable parameter to approximately account for the effects of nanometric confinement on aqueous electrolyte solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanisms of Symmetry Breaking in a Multidimensional Flashing Particle Ratchet

Ratcheting is a mechanism that produces directional transport of particles by rectifying nondirectional energy using local asymmetries rather than a net bias in the direction of transport. In a flashing ratchet, an oscillating force (here, an AC field) is applied perpendicular to the direction of transport. In an effort to explore the properties of current experimentally realizable ratchet systems, and to design new ones, this paper describes classical simulations of a damped flashing ratchet that transports charged nanoparticles within a transport layer of finite, non-zero thickness. The thickness of the layer, and the decay of the applied field in the z -direction throughout that thickness, provide a mechanism of symmetry breaking in the system that allows the ratchet to produce directional transport using a temporally unbiased oscillation of the AC driving field, a sine wave. Sine waves are conveniently produced experimentally or harvested from natural sources but cannot produce transport in a 1D or pseudo-1D system. The sine wave drive produces transport velocities an order of magnitude higher than those produced by the common on/off drive, but lower than those produced by a temporally biased square wave drive (unequal durations of the positive and negative states). Finally, the dependence of the particle velocity on the thickness of the transport layer, and on the homogeneity of the oscillating field within the layer, is presented for all three driving schemes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗