Calorimetric emittance and reflectance measuring equipment, appendix E
Equipment and procedures for measuring shield emittance and reflectance data
Source record↗
SEARCH · Search NASA
Results for “reflection data”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Preliminary results of aerial infrared surveys at Pisgah Crater, California
In-flight tests of airborne infrared scanners, and comparison with field reflectance data
Fischer, W. A.↗
Ecological potentials in spectral signature analysis
Ecological potentials in spectral signature analysis, using laboratory leaf and soil spectral reflectance data
Hoffer, R. M.↗
Simulation of Mariner Mars 1971 spacecraft
Preparation for the Mariner Mars 1971 mission is reported, including an extensive training program for operations personnel during which the primary source of spacecraft data was a computer program simulating the spacecraft. The objectives of a simulation model for training purposes differed from objectives appropriate to a design or analysis model. Model subsystems were designed to provide realistic telemetry data reflecting changes due both to commands and environmental parameters affecting the spacecraft at various times during the mission. The spacecraft is modeled along two separate functional lines. Boolean operations are concentrated in the spacecraft logic model, which determines the spacecraft state or mode, while mathematical operations or algorithms are executed in computational subsystem models. Although logic parameters are interrogated as a part of each computational pass, actual logic model processing occurs only when a change-of-state input is generated by the operations organization. The program design, some of the special characteristics of each of the modeled subsystems, and how the model was used in support of mission operations training are presented.
Ausman, N. E., Jr.↗
Lunar dust and radiation darkening of Surveyor 3 surfaces
Measured spectral reflectance, evidence obtained from photographs, scanning electron microscopy, and previous work on Surveyor hardware were used to develop an understanding of the observed discoloration and its meaning to future space and lunar operations. Measured reflectance data were analyzed to separate and understand the effects of lunar dust and radiation damage. It was concluded that organic contamination is not a major contributor to the discoloration. Radiation-induced discoloration on the various surfaces was found to be proportional to the degree of solar illumination. Photobleaching of the radiation damage was observed and was responsible for a gradual change in the color of the camera's surface during the evaluation.
Carroll, W. F.↗
Prediction of directional reflectance of a corn field under stress
A vegetative canopy model concept is developed and used to calculate the directional spectral reflectance of a corn field under stress. The problem has been idealized by assuming that the canopy is represented in several layers of uniform but randomly distributed biological components; horizontal and vertical projection of leaves, for example, replaces the actual leaf. An accumulative horizontal projection leads to a quantitative horizontal leaf area index while accumulated vertical projections provide the vertical leaf index area for each layer. The spectral properties of the projections are obtained from the spectral properties of the biological components. These techniques together with soil reflectance data provide a physical description for the vegetative canopy and adequately interprete multispectral scanning data.
Suits, G. H.↗
Analysis of fungal type isolates taken from a 90-day manned test of an advanced regenerative life support system
Fungal-like cultures isolated before, during, and after the 90-day test from samples of space station simulator (SSS) atmosphere, surfaces, subsystem componets, and crew dermal sites were identified to genus. Out of the original 525 isolates, approximately 80% were classified as bacteria. Laboratory methods (culture media, moisturization, and incubation temperatures) favored the recovery of medically significant bacteria rather than fungi. Therefore, fungal isolates were mostly, nonfastidious types which are ubiquitous in soil and air and commonly contaminate laboratory cultures of pathogens. Predominant isolates were species of Aspergillus, Penicillium, Pullularia, Rhodotorula, and various yeasts. No instances of fungal proliferation were observed; test data reflect the survival of environmental types indigenous to the SSS pretests.
Sofios, M.↗
Automated geologic mapping using rock reflectances.
Investigation of the feasibility of preparing geologic maps automatically through computer processing of calibrated narrow-band visible and near IR reflectivity data collected with a 12-channel scanner. Five procedures were followed in the computer analysis of the radiances recorded as voltages on analog magnetic tape. Three recognition maps have been generated iteratively using a progressively more complex classification scheme. The overall accuracy of the first recognition map was 80%, but the discrimination of the limestone and dolomite was only 50-60%. All three maps are very accurate outcrop maps. The results demonstrate the feasibility of automated geologic mapping in this relatively simple setting.
Watson, R. D.↗
Multi-spectral image dissector camera system
The image dissector sensor for the Earth Resources Program is evaluated using contrast and reflectance data. The ground resolution obtainable for low contrast at the targeted signal to noise ratio of 1.8 was defined. It is concluded that the system is capable of achieving the detection of small, low contrast ground targets from satellites.
Source record↗
Determination of Optical Constants of in Bi from Reflectance Measurements
A fall in reflectance was noted from values obtained for a freshly cleaved sample to values obtained after periods of exposure of the surface to air. The decrease in reflectance with increased exposure time is attributed to formation of a surface layer insoluble in Freon or ethyl alcohol; it is assumed to be a tarnish layer. Computer processing was employed to calculate optical constants from reflectance data.
Martin, F. E.↗
Revised tables of airspeed, altitude, and Mach number presented in the International system of units
Because inception of a national program to implement the International System of Units (SI) appears to be inevitable and imminent, the tables of airspeed, altitude, and Mach number prepared by Livingston and Gracey to serve for airspeed meter and altimeter calibrations and for the conversion of flight measurements of these quantities to related parameters - Mach number, true airspeed, equivalent airspeed, etc. - have been revised to the SI. Tables of airspeed in knots are also included because of the significance of this quantity in navigation. In addition, the data in the altitude tables have been revised to the U.S. Standard Atmosphere of 1962. The latter data reflect increased knowledge of the higher atmosphere and more precise determination of basic quantities, including the redefinition of the absolute thermodynamic temperature scale by the Tenth General Conference on Weights and Measures in 1954. The U.S. Standard Atmosphere, 1962, corresponds to the International Civil Aviation Organization (ICAO) Standard Atmosphere up to 20 kilometers (geopotential altitude). A table of conversion factors for various pressure units is presented in SI Units.
Benner, M. S.↗
Investigation of the Kramers-Kronig analysis - Revised optical constants of AgCl
White and Straley (1968) have reported room-temperature optical constants for AgCl that exhibit negative, unphysical dips at the band edge. Because Morrison (1961) also obtained such behavior for InAs, InSb, and GaAs, a study is made of the possible sources of this anomaly. An artifact of the experimental reflectance data near this energy is found to be responsible. No defect in the Kramers-Kronig transform or its use is implied, contrary to some suggestions. The corrected optical constants of AgCl were modified by about 10% up to 5 eV, whereas at higher energies they were barely affected. Thus Kramers-Kronig-deduced optical constants that exhibit unusual structure are not affected by this structure at other energies. The new AgCl results are presented, and assignments are briefly discussed.
Bauer, R. S.↗
Reflectance and optical constants for Cer-Vit from 250 to 1050 A
The reflectance for a bowl-feed polished Cer-Vit sample was measured at nine wavelengths and five angles of incidence from 15 to 85 deg. Optical constants were derived by the reflectance-vs-angle-of-incidence method and compared to previously reported values for ultralow-expansion fused silica and several other glasses. Surface-roughness corrections of the reflectance data and optical constants are discussed.
Osantowski, J. F.↗
Highly reflecting stable white paint for the detection of ultraviolet and visible radiations
Compositions, formulating procedures, and application techniques are presented for highly reflecting stable white paint coatings suitable for the detection of ultraviolet and visible radiations. For completeness, absolute and relative reflectance data are included for intrasystem and intersystem comparisons.
Schutt, J. B.↗
Techniques for carrying out radiative transfer calculations for the Martian atmospheric dust
A description is given of the modification of a theory on the reflectance of particulate media so as to apply it to analysis of the infrared spectra obtained by the IRIS instrument on Mariner 9. With the aid of this theory and the optical constants of muscovite mica, quartz, andesite, anorthosite, diopside pyroxenite, and dunite, modeling calculations were made to refine previous estimates of the mineralogical composition of the Martian dust particles. These calculations suggest that a feldspar rich mixture is a very likely composition for the dust particles. The optical constants used for anorthosite and diopside pyroxenite were derived during this program from reflectance measurements. Those for the mica were derived from literature reflectance data. Finally, a computer program was written to invert the measured radiance data so as to obtain the absorption coefficient spectrum which should then be independent of the temperature profile and gaseous component effects.
Aronson, J. R.↗
LANDSAT inventory of surface-mined areas using extendible digital techniques
Multispectral analysis of LANDSAT imagery provides a rapid and accurate means of identification, classification, and measurement of strip-mined surfaces in Western Maryland. Four band analysis allows distinction of a variety of strip-mine associated classes, but has limited extendibility. A method for surface area measurement of strip mines, which is both geographically and temporally extendible, was developed using band-ratioed LANDSAT reflectance data. The accuracy of area measurement by this method, averaged over three LANDSAT scenes taken between September 1972 and July 1974, is greater than 93%. Total affected acreage of large (50 hectare/120 acre) mines can be measured to within 1.0%.
Anderson, A. T.↗
LANDSAT inventory of surface-mined areas using extendible digital techniques
Multispectral LANDSAT imagery was analyzed to provide a rapid and accurate means of identification, classification, and measurement of strip-mined surfaces in Western Maryland. Four band analysis allows distinction of a variety of strip-mine associated classes, but has limited extendibility. A method for surface area measurements of strip mines, which is both geographically and temporally extendible, has been developed using band-ratioed LANDSAT reflectance data. The accuracy of area measurement by this method, averaged over three LANDSAT scenes taken between September 1972 and July 1974, is greater than 93%. Total affected acreage of large (50 hectare/124 acre) mines can be measured to within 1.0%.
Anderson, A. T.↗
The infrared optical constants of sulfuric acid at 250 K
Results are presented for measurements of the IR spectral reflectance at near-normal incidence of aqueous solutions of sulfuric acid with acid concentrations of 75% and 95.6% by weight. Kramers-Kronig analyses of the reflectance data are employed to obtain values of the optical constants n(nu) and k(nu) in the spectral range from 400 to 6000 cm to the -1 power. The optical constants of these solutions at 250 K and 300 K are compared. It is found that in spectral regions remote from strong absorption bands, the values of the n(nu) indices obtained at 250 K agree with the values given by Lorentz-Lorenz correction of the same indices at 300 K. All absorption bands observed at 300 K are found to be present at 250 K with slight shifts in frequency and with significant differences in the k(nu) indices at the band maxima. Based on these results, it is concluded that the clouds of Venus probably consist of droplets of aqueous solutions of sulfuric acid with acid concentrations of about 75% by weight.
Pinkley, L. W.↗