Search NASA⌕ Search

SEARCH · Search NASA

Results for “rotation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

The computation of inviscid rotational gasdynamic flows using an alternate velocity decompositon

The present investigation has the objective to present a method which can be considered to be a modification of existing potential flow algorithms. The method can be employed for the accurate and efficient solution of rotational gasdynamic flows. The general approach to computing inviscid rotational flows considered makes use of a velocity decomposition discussed by Clebsch (1859). Recent applications of the Clebsch representation in inviscid flows have involved the convection of an externally generated vorticity. Attention is given to the case of a steady, inviscid flow of a perfect gas with a uniform incoming stream. The developed procedure makes it possible to obtain a rapid solution to inviscid, compressible, rotational flows with solution algorithms which are a modification of existing potential flow codes. An application of the procedure to supersonic rotational conical flow is discussed.

Grossman, B.↗

Bubble motion in a rotating liquid body

The behavior of a single gas bubble inside a rotating liquid-filled sphere has been investigated analytically and experimentally as part of ground-based investigations aimed at aiding in the design and interpretation of Shuttle experiments. In the analysis, a quasi-static description of the motion of a bubble was developed in the limit of small values of the Taylor number. A series of rotation experiments using air bubbles and silicone oils were designed to match the conditions specified in the analysis, i.e., the bubble size, sphere rotation rate, and liquid kinematic viscosity were chosen such that the Taylor number was much less than unity. The analytical description predicts the bubble velocity and its asymptotic location. It is shown that the asymptotic position is removed from the axis of rotation.

Annamalai, P.↗

Flow mechanism and experimental investigation of a rotating stall in transonic compressors

The flow characteristics of the rotating stall in compressors is studied, and a flow model is developed along with a theoretical calculation method based on vortex theory. A detailed theoretical calculation is completed for a two dimensional flow field in a transonic rotor in a rotating stall, and the result is in good agreement with experimental findings. The oscillograms of time-varying stall characteristic parameters recorded for the onset, growth, and cessation processes of rotating stall are analyzed, and some new flow phenomena deserving of further investigation are discovered. These include serious separation of individual blades, often preceding the onset of rotating stall in compressors with very small blade-camber angles, and periodical variation of the circumferential width of the stall cell with time, accompanied by periodical oscillation of the width of the stall cell in the radial direction of the blade. The circumferential and radial oscillation frequencies are the same.

Yajun, L.↗

Rotational CARS application to simultaneous and multiple-point temperature and concentration determination in a turbulent flow

Coherent anti-Stokes Raman scattering (CARS) from the pure rotational Raman lines of N2 is employed to measure the instantaneous (approximately 10 ns) rotational temperature of N2 gas at room temperature and below with good spatial resolution (0.2 x 0.2 x 3.0 cu mm). A broad bandwidth dye laser is used to obtain the entire rotational spectrum from a single laser pulse; the CARS signal is then dispersed by a spectrograph and recorded on an optical multichannel analyzer. A best fit temperature is found in several seconds with the aid of a computer for each experimental spectrum by a least squares comparison with calculated spectra. The model used to calculate the theoretical spectra incorporates the temperature and pressure dependence of the pressure-broadened rotational Raman lines, includes the nonresonant background susceptibility, and assumes that the pump laser has a finite linewidth. Temperatures are fit to experimental spectra recorded over the temperature range of 135 to 296 K, and over the pressure range of .13 to 15.3 atm.

Snow, J. B.↗

Rotational cars application to simultaneous and multiple-point temperature and concentration determination in a turbulent flow

Coherent Anti-stokes Raman Scattering (CARS) from the pure rotational Raman lines of N2 is employed to measure the instantaneous rotational temperature of N2 gas at room temperature and below with good spatial resolution. A broad-bandwidth dye laser is used to obtain the entire rotational spectrum from a signal laser pulse; the CARS signal is then dispersed by a spectrograph and recorded on an optical multichannel analyzer. A best-fit temperature is found in several seconds with the aid of a computer for each experimental spectrum by a least squares comparison with calculated spectra. The model used to calculate the theoretical spectra incorporates the temperature and pressure dependence of the pressure-broadened rotational Raman lines, includes the nonresonant background susceptibility, and assumes that the pump laser has a finite linewidth. Temperatures are fit to experimental spectra recorded over the temperature range of 135 to 296K, and over the pressure range of 0.13 to 15.3 atm. In addition to the spatially resolved single point work, we have used multipoint CARS to obtain information from many spatially resolved volume elements along a cylindrical line (0.1 x 0.1 x 2.0 mm). We also obtained qualitative information on the instantaneous species concentration and temperature at 20 spatially resolved volume elements (0.1 x 0.1 x 0.1 mm) along a line.

Snow, J. B.↗

Vibrational and rotational excitation of CO in comets. Part 1: Non-equilibrium calculations. Part 2: Results of the calculation for standard bright comet, comet Iras-Araki-Alcock and comet Halley

The vibrational and rotational excitation of the CO molecule in cometary comae were investigated using a model which includes IR vibrational pumping by the solar flux, vibrational and rotational radiative decay, and collisional coupling among rotational states. Steady state was not assumed in solving the rate equations. The evolution of a shell of CO gas was monitored as it expanded from the nucleus into the outer coma. Collisional effects were treated using a kinetic temperature profile derived from theoretical work on the coma energy balance. The kinetic temperature was assumed to be extremely cold in the inner coma; this has significant consequences for the CO excitation. If optical depth effects are ignored, only low J transitions will be significantly excited in comets observed at high spatial resolution. Ground-based observations of CO co-vibrational and rotational transitions will be extremely difficult due to lack of sensitivity and/or terrestrial absorption. However, CO should be detectable from a large comet with favorable observing geometry if the CO is a parent molecule present at the 10% level (or greater) relative to H2O. Observations using cooled, spaceborne instruments should be capable of detecting CO emission from even moderately bright comets.

Chin, G.↗

NASTRAN forced vibration analysis of rotating cyclic structures

Theoretical aspects of a new capability developed and implemented in NASTRAN level 17.7 to analyze forced vibration of a cyclic structure rotating about its axis of symmetry are presented. Fans, propellers, and bladed shrouded discs of turbomachines are some examples of such structures. The capability includes the effects of Coriolis and centripetal accelerations on the rotating structure which can be loaded with: (1) directly applied loads moving with the structure and (2) inertial loas due to the translational acceleration of the axis of rotation (''base' acceleration). Steady-state sinusoidal or general periodic loads are specified to represent: (1) the physical loads on various segments of the complete structure, or (2) the circumferential harmonic components of the loads in (1). The cyclic symmetry feature of the rotating structure is used in deriving and solving the equations of forced motion. Consequently, only one of the cyclic sectors is modelled and analyzed using finite elements, yielding substantial savings in the analysis cost. Results, however, are obtained for the entire structure. A tuned twelve bladed disc example is used to demonstrate the various features of the capability.

Elchuri, V.↗

Rotating-fluid experiments with an atmospheric general circulation model

In order to determine features of rotating fluid flow that are dependent on the geometry, rotating annulus-type experiments are carried out with a numerical model in spherical coordinates. Rather than constructing and testing a model expressly for this purpose, it is found expedient to modify an existing general circulation model of the atmosphere by removing the model physics and replacing the lower boundary with a uniform surface. A regime diagram derived from these model experiments is presented; its major features are interpreted and contrasted with the major features of rotating annulus regime diagrams. Within the wave regime, a narrow region is found where one or two zonal wave numbers are dominant. The results reveal no upper symmetric regime; wave activity at low rotation rates is thought to be maintained by barotropic rather than baroclinic processes.

Geisler, J. E.↗

Is stellar differential rotation observable?

Daily measures of the disk integral 2.8 GHz solar flux from the years 1947 through 1982 are analyzed to determine the detectability of stellar differential rotation using the tracer method. Autocorrelation and power spectral analyses of 1 yr data sets yield rotation periods whose scatter about the mean period is too large to permit detection of the expected differential rotation signal. The principal noise source is the random appearance of tracer regions on the solar surface, in time and longitude. Criteria are given for optimizing stellar observations and analyses to detect differential rotation.

Labonte, B. J.↗

A study of the dependence of Mg II emission on the rotational periods of main-sequence stars

International Ultraviolet Explorer satellite measurements of the Mg II chromospheric emission from a sample of late-type dwarfs with known rotational periods are presented. The ratio of chromospheric to photospheric luminosity for the late-G and K type stars in this sample can be fitted within the probable errors by a single function of rotational period. The chromospheric emission of early-G and F dwarfs appears to depend upon rotation in a qualitatively different way, which suggests that the rapid variation of convective zone properties in this spectral range affects the dissipation of energy in the chromosphere. Mg II h and k emission correlates fairly well with Ca II emission. However, the data sample is not large enough at present to show conclusively that Mg II emission exhibits precisely the same dependence on rotation and spectral type as the Ca II H and K line fluxes.

Hartmann, L.↗

Rotation in prominences

Rotation has been studied in noneruptive limb prominences; in most cases, Dopplergrams could be used to confirm proper motion measurments. In some cases, part of the prominence rotates; in the others, the entire body is in rotation. Velocities of 15-75 km/sec are found. Of 51 prominences studied in 1978, five showed rotation.

Liggett, M.↗

Block rotation by strike-slip faulting - Structural and paleomagnetic evidence

The magnitude and sense of block rotations depicted from such structural data as fault spacing and slip are noted to agree with values obtained from independent paleomagnetic determinations. The agreement between paleomagnetic rotation data and those inferred from offset and spacing data in northern Israel is excellent, suggesting that the faults and intervening blocks were rotated with progressive deformation along the levant transform. It is suggested that the rotation of blocks and the strike-slip displacement are two qualitative and quantitative contemporaneous aspects of a single deformation process.

Ron, H.↗

Rotational frequency splitting of solar oscillations

Prograde and retrograde sectoral oscillations of the sun have been observed so as to determine frequency differences produced by rotation. Oscillations in the frequency range 2.1-3.7 mHz and with spherical harmonic degrees from 1 to 100 have been identified. Average frequency shifts due to rotation in a sidereal reference frame are found to range from a high of about 660 nHz at degree 1 to a low of about 423 nHz at degree 6, rising to about 471 nHz at degree 100. These results indicate that most of the sun's volume rotates at a rate close to that of the surface, but also that the energy-generating core may rotate more rapidly than the surface.

Duvall, T. L., Jr.↗

Rotating Connection for Electrical Cables

Cable reel provides electrical connections between fixed structure and rotating one. Reel carries power and signal lines while allowing rotating structure to turn up to 360 degrees with respect to fixed structure. Reel replaces sliprings. Can be used to electrically connect arm of robot with body. Reel releases cable to rotating part as it turns and takes up cable as rotating part comes back to its starting position, without tangling, twisting, or kinking.

Manges, D. R.↗

Rotational Inversion from Global Solar Oscillations

The degree to which various sets of solar oscillations can resolve the solar internal rotation was investigated. Genuine observations were simulated by the following procedure; first an artificial angular velocity was invented, and from it the rotational splitting of a set of normal modes was calculated; to that was added some random noise. The result was treated as artificial data and an attempt to recover the rotation law by using the Backus-Gilbert optimal averaging procedure was made. Neither the original rotation law nor the amount of noise that had been added was known. The conclusion was compared with the actual artificial angular velocity.

Christensen-Dalsgaard, J.↗

Vibration and buckling of rotating, pretwisted, preconed beams including Cooriolis effects

The effects of pretwist, precone, setting angle and Coriolis forces on the vibration and buckling behavior of rotating, torsionally rigid, cantilevered beams were studied. The beam is considered to be clamped on the axis of rotation in one case, and off the axis of rotation in the other. Two methods are employed for the solution of the vibration problem: (1) one based upon a finite-difference approach using second order central differences for solution of the equations of motion, and (2) based upon the minimum of the total potential energy functional with a Ritz type of solution procedure making use of complex forms of shape functions for the dependent variables. The individual and collective effects of pretwist, precone, setting angle, thickness ratio and Coriolis forces on the natural frequencies and the buckling boundaries are presented. It is shown that the inclusion of Coriolis effects is necessary for blades of moderate to large thickness ratios while these effects are not so important for small thickness ratio blades. The possibility of buckling due to centrifugal softening terms for large values of precone and rotation is shown.

Subrahmanyam, K. B.↗

Space station rotational equations of motion

Dynamic equations of motion are developed which describe the rotational motion for a large space structure having rotating appendages. The presence of the appendages produce torque coupling terms which are dependent on the inertia properties of the appendages and the rotational rates for both the space structure and the appendages. These equations were formulated to incorporate into the Space Station Attitude Control and Stabilization Test Bed to accurately describe the influence rotating solar arrays and thermal radiators have on the dynamic behavior of the Space Station.

Rheinfurth, M. H.↗

Computation and turbulence closure models for shear flows in rotating curved bodies

This paper is concerned with the effects of rotation and curvature on the turbulence closure model. The k-epsilon model that includes the effects of curvature has been modified to include the anisotropy in turbulence. A space-marching algorithm which solves the parabolized Navier-Stokes equations is coupled with the turbulence closure model to predict the turbulent shear flow over a rotating cylinder and inside a rotating channel. The agreement between the predictions and available data is good. The rotation and curvature effects are predicted well.

Pouagare, M.↗