Search NASA⌕ Search

SEARCH · Search NASA

Results for “salinity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Predictive modeling of CO2 sequestration in deep saline sandstone reservoirs: Impacts of geochemical kinetics

One idea for mitigating the increase in fossil-fuel generated CO{sub 2} in the atmosphere is to inject CO{sub 2} into subsurface saline sandstone reservoirs. To decide whether to try such sequestration at a globally significant scale will require the ability to predict the fate of injected CO{sub 2}. Thus, models are needed to predict the rates and extents of subsurface rock-water-gas interactions. Several reactive transport models for CO{sub 2} sequestration created in the last decade predicted sequestration in sandstone reservoirs of ~17 to ~90 kg CO{sub 2} m{sup -3|. To build confidence in such models, a baseline problem including rock + water chemistry is proposed as the basis for future modeling so that both the models and the parameterizations can be compared systematically. In addition, a reactive diffusion model is used to investigate the fate of injected supercritical CO{sub 2} fluid in the proposed baseline reservoir + brine system. In the baseline problem, injected CO{sub 2} is redistributed from the supercritical (SC) free phase by dissolution into pore brine and by formation of carbonates in the sandstone. The numerical transport model incorporates a full kinetic description of mineral-water reactions under the assumption that transport is by diffusion only. Sensitivity tests were also run to understand which mineral kinetics reactions are important for CO{sub 2} trapping. The diffusion transport model shows that for the first ~20 years after CO{sub 2} diffusion initiates, CO{sub 2} is mostly consumed by dissolution into the brine to form CO{sub 2,aq} (solubility trapping). From 20-200 years, both solubility and mineral trapping are important as calcite precipitation is driven by dissolution of oligoclase. From 200 to 1000 years, mineral trapping is the most important sequestration mechanism, as smectite dissolves and calcite precipitates. Beyond 2000 years, most trapping is due to formation of aqueous HCO{sub 3}{sup -}. Ninety-seven percent of the maximum CO{sub 2} sequestration, 34.5 kg CO{sub 2} per m{sup 3} of sandstone, is attained by 4000 years even though the system does not achieve chemical equilibrium until ~25,000 years. This maximum represents about 20% CO{sub 2} dissolved as CO{sub 2},aq, 50% dissolved as HCO{sub 3}{sup -}{sub ,aq}, and 30% precipitated as calcite. The extent of sequestration as HCO{sub 3}{sup -} at equilibrium can be calculated from equilibrium thermodynamics and is roughly equivalent to the amount of Na+ in the initial sandstone in a soluble mineral (here, oligoclase). Similarly, the extent of trapping in calcite is determined by the amount of Ca2+ in the initial oligoclase and smectite. Sensitivity analyses show that the rate of CO{sub 2} sequestration is sensitive to the mineral-water reaction kinetic constants between approximately 10 and 4000 years. The sensitivity of CO{sub 2} sequestration to the rate constants decreases in magnitude respectively from oligoclase to albite to smectite.

54 ENVIRONMENTAL SCIENCES↗

A putative cyclin, SiPHO80 from root endophytic fungus Serendipita indica regulates phosphate homeostasis, salinity and heavy metal toxicity tolerance

Highlights: • SiPHO80 of S. indica gets upregulated in high Phosphate condition. • SiPHO80 restores Pi homeostasis in S. cerevisiae PHO80 mutants. • SiPHO80 rescues S. cerevisiae PHO80 mutants in salinity stress and heavy metal toxicity. Serendipita indica previously known as Piriformospora indica is an arbuscular mycorrhizal fungi (AMF) like endophytic fungus which can be cultivated axenically and colonizes an array of plants, thereby promoting their growth and confers biotic and abiotic stress tolerance to the colonized host plant. It efficiently sequestrates heavy metals and defends host plant against heavy metal-induced toxicity. In the present study, SiPHO80, a homologue of S. cerevisiae PHO80 was isolated from S. indica and functionally characterized in S. cerevisiae. SiPHO80 has conserved ‘cyclin box’ domain and closely related to negative regulator cyclin of the wood decaying fungi. In S. indica, its expression gets upregulated in phosphate-rich media. The regulation of Pi homeostasis which was disrupted in S. cerevisiae Δpho80 grown under high Pi condition was restored upon complementation with SiPHO80. Also, the expression of SiPHO80 in Δpho80 mutant restored osmotolerance and heavy metal tolerance. This is the first report of a cyclin which is involved in Pi homeostasis, salt tolerance, heavy metal toxicity tolerance in any plant growth promoting endophytic fungi.

60 APPLIED LIFE SCIENCES↗

Review of low salinity waterflooding in carbonate rocks: mechanisms, investigation techniques, and future directions

This review analyses the fundamental thermodynamic theory of the crude oil-brine-rock (COBR) interface and the underlying rock-brine and oil-brine interactions. Next, the available data are reviewed to outline potential mechanisms responsible for increased oil recovery from low salinity waterflooding (LSWF). We propose an approach to studying LSWF and identify the key missing links that are needed to explain observations at multiple length scales. The synergistic effect of LSWFon other chemical enhanced oil recovery methods such as surfactant, alkaline, nanoparticle and polymer flooding are also outlined. We specifically highlight key uncertainties that must be overcome to fully implement the technique in the field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scaling dynamics in low-salt-rejection reverse osmosis for high-salinity produced water desalination: Mechanistic modeling and membrane autopsy

Membrane scaling remains a critical barrier to the reliable operation of desalination systems, particularly for hypersaline produced water (PW) treatment. This study fills the knowledge gap of autopsy-based model validation for PW desalination by elucidating scaling mechanisms in a Low-Salt-Rejection Reverse Osmosis (LSRRO) system through the integration of pilot-scale experimentation and complementary modeling approaches. A semi-empirical modeling framework was developed and applied to a multistage pilot LSRRO system equipped with nanofiltration and RO membranes treating high-salinity PW from the Permian Basin. Water quality analysis showed that total dissolved solids decreased from ~130,000 mg/L to ~1900 mg/L in the permeate, then further reduced to ~300 mg/L by a second-pass RO. Two different thermodynamic modeling approaches were evaluated: the first extends the LSRRO framework by incorporating system complexity and scaling phenomena, whereas the second method explicitly captures concentration polarization in localized supersaturation. Both methods illustrate the tendency for carbonate and sulfate scaling throughout the stages. Membrane autopsies revealed a silica-dominated deposit matrix, localized CaSO 4 at Stage 2, and minor barite/celestite despite their prominence in model predictions. Quantum-chemical calculations indicated silica scaling can be rationalized by favorable adsorption of H 4 SiO 4 on Fe-oxide surfaces (ΔG ≈ −44 kJ/mol), providing a kinetic pathway for interfacial inorganic polymerization even when bulk equilibrium predictions are conservative. Overall, the thermodynamic scaling modeling and membrane autopsy revealed heterogeneous, localized deposits with limited impact on LSRRO performance, while quantum analysis rationalized the thermodynamically unfavorable precipitation formation under bulk equilibrium, reconciling model–autopsy discrepancies. These insights support targeted pretreatment and silica-specific antiscalants to extend membrane lifetime and increase recovery, providing a transferable framework for hypersaline water desalination systems. The combined experimental–computational approach provides new mechanistic insight into scaling in hypersaline membrane systems and establishes a transferable framework for predicting and mitigating scaling in next-generation desalination technologies.

Low-salt-rejection reverse osmosis↗

Response of Integrated CO 2 Capture and Storage Systems in Saline Aquifers and Fractured Shale Formations to Changes in CO 2 Capture Costs

Fractured shale formations are new potential target reservoirs for CO 2 capture and storage (CCS) and provide several potential advantages over storage in saline aquifers in terms of storage capacity, leakage risk, and cost savings from brownfield development. Here, we used a geospatial-optimization, engineering-economic model to investigate the sensitivity of integrated CCS networks in Ohio, Pennsylvania, and West Virginia to reductions in CO 2 capture costs. The resulting reductions in CO 2 capture costs were based on hypothetical cases where technological innovation reduced CO 2 capture costs. There were also small differences in the spatial organization of the CCS deployment when the capture costs were reduced. We also found that the percent reduction in average cost of CCS systems became smaller as the CO 2 capture costs were decreased.

54 ENVIRONMENTAL SCIENCES↗

New insights into the flow dynamics of a deep freshwater aquifer in the semi-arid and saline Cuvelai-Etosha Basin, Northern Namibia: Results of a multi-environmental tracer study

Study region A paleo-megafan system of the Cubango River in the northern parts of the semi-arid Cuvelai-Etosha Basin, shared by Angola and Namibia. It hosts a deep freshwater aquifer, the so-called Kalahari-Ohangwena 2 (KOH-2), with the potential to resolve the imminent regional water supply shortages. Study focus Hydrogeochemical and multi-environmental tracer studies incorporating the use of age tracers 14 C, 36 Cl, 81 Kr and 4 He to determine the age of groundwater and provide insights into the flow dynamics of the KOH-2. New hydrological insights for the region Stable water isotopes and noble gas thermometry show that in a period with higher rainfall and recharge, temperatures were at least 3 – 4 °C lower than today. Several arguments led to the conclusion that younger groundwater, possibly of an age of 35,000 years, is mixed with ancient saline pore water. These include: 1) the correlation of measured 36 Cl and 81 Kr ratios, as well as 4 He concentrations, using a binary mixing model, and 2) the substantial variation in 81 Kr ages, ranging from 40,000 to 170,000 years, over relatively short distances—a phenomenon challenging to explain by advective groundwater flow equations. Consequently, the ages derived from 81 Kr measurements serve as indicators of the extent of freshening and therefore describe mixing ages rather than absolute travel times.

54 ENVIRONMENTAL SCIENCES↗

Effect of Cu on the passivity of Ti–xCu (x = 0, 3 and 5 wt%) alloy in phosphate-buffered saline solution within the framework of PDM-II

The effect of copper content on the passivity of Ti–xCu alloys in a phosphate-buffered saline electrolyte (pH 7.4), in the steady-state condition, was examined using potentiostatic polarization, electrochemical impedance spectroscopy, and Mott-Schottky analysis. The study demonstrates that the oxide layer forms on the Ti–xCu alloys surface have n-type semiconducting character, and the steady-state thickness of the oxide layer is observed linearly and depends on the applied potential. The study observations are in line with the predictions of the Point Defect Model (PDM-II), which provides a physiochemically realistic description of the oxide layer formation on Ti–xCu alloys. The observations reveal that the Cu additions result in a decrease in the charge transfer resistance and capacitances associated with the hydroxide and barrier layer, an increase in the donor density, and reduce the electrochemical resistance of the Ti–xCu alloys. The study also exhibits that the decrease in the steady-state current density after the initial addition of 3 wt% of Cu is attributed to the progressive substitution of copper on the cation sublattice of the film resulting in enhanced electrostatic interaction between the immobilized copper $Cu^{x'}_{Ti}$, and the mobile cation interstitials $Cu^{+}_{i}$, which carries the excess current over and that conveyed by oxygen vacancies $V^{••}_o$ in the barrier layer. Moreover, it is also observed that over a hundred-year implant period, about 0.006 cm (0.06 mm) of Ti–3Cu alloy is predicted to lose due to steady-state corrosion in the PBS solution under the given set of conditions, it is further seen that, as the Cu amount increased from 3 wt% to 5 wt% in the Ti–xCu alloys, the steady-state corrosion rate decreases.

Electrochemical Impedance Spectroscopy↗

Synthesis of rhenium coatings on 316 stainless steel and their electrochemical behavior towards water oxidation in saline environments

The production of electrolytic hydrogen or Green Hydrogen has attracted the attention of scientists as a potential enabler of sustainable energy production. The cleavage of the water molecule requires high energy, in order to produce hydrogen and oxygen through their corresponding half reactions, the hydrogen evolution and oxygen evolution reactions. Further, this latter reaction has been studied in more detail, since its slow kinetics make the water electrolysis less efficient, and, for instance, delay the formation of hydrogen in the counter compartment of the electrolytic cell. In this work, a study of the oxygen evolution reaction is presented. For this, a series of rhenium catalysts deposited onto stainless steel 316 are studied with the aim of analyzing the effect of the pure metal (Re) and the metal with heteroatoms (Re-C, Re-B, and Re-O). As one of the problems worldwide is the scarcity of freshwater, the study focuses on the performance of this series of catalysts in highly saline environments, representative of seawater. The synthesis and electrochemical performance is shown, giving high expectations that these electrocatalysts could be potential electrocatalysts in marine environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fluorographite-co-polydimethylsiloxane coated polyvinylidene-fluoride membrane for desalination of highly saline water with humic acid in direct contact membrane distillation

Highlights: • Surface modifications by FGi particles with PDMS binder of PVDF microporous membranes shown improvement in DCMD. • LEP with DI water & performance of M2-M4 modified membranes in DCMD was enhanced with 1M NaCl & 10 ppm HA feed solution. • Amphiphobicity was evidenced by CA with low surface tension liquids upto 38 dyne/cm as well as with canola oil. • EDX analysis proved enhancement in FC ratio and membrane surface analysis lead to understand enhanced performance in DCMD. Membranes with amphiphobic properties are crucial for desalination of concentrated saline water with organic foulant by membrane distillation. In this research, we coated Fluorographite (FGi) particles on polyvinylidene-fluoride (PVDF) flat sheet membranes with 0.8% v/v polydimethylsiloxane (PDMS) as binder by filtration coating method. We evaluated its amphiphobicity via contact angles which were observed by DI water, canola oil and organic solutions as mimicking for oleophobicity. Surface modifications by FGi particles on the surface of membranes was introduced with PDMS binder which brought bifunctionality of amphiphobicity to enhance hydrophobicity and oleophobicity. We also investigated performance of coated membranes in direct contact membrane distillation (DCMD) with 1 molar concentrated NaCl solution along with humic acid being organic foulant and compared with virgin membrane (M1 membrane) and Liquid entry pressure (LEP) was also evaluated. LEP was measured by dynamic method which shown considerable improvement in coated membranes. M3 membrane showed overall better performance in terms of salt rejection higher than 99.87% and flux as compared to M1 membrane. Furthermore, the evaluation of surface characterizations was done by FESEM with EDX, AFM and FTIR. Surface morphology confirmed the coating of FGi on membrane surface while EDX evidenced increase in atomic percent of fluorine in turn F:C ratio.

54 ENVIRONMENTAL SCIENCES↗

The solubility of ErPO 4 and Er speciation in hydrothermal fluids at varying pH and salinity between 350 and 450 °C

The rare earth elements (REE) are important for the green-energy transition and can be incorporated into the REE phosphates, such as xenotime-(Y), which also hosts heavy REE (Tb– Lu). Xenotime-(Y) is a common accessory mineral in metamorphic rocks and a range of mineral deposits where it controls the mobility of heavy REE, however, the impact of high temperature aqueous fluids on the behavior of heavy REE is largely unknown. Thermodynamic modeling can be utilized as a tool to predict the mobility of REE in hydrothermal aqueous fluids, but must be supported by accurate experimental data. Here, we measured the solubility of endmember synthetic xenotime-structured ErPO4 in NaCl-HCl-NaOH-bearing aqueous solutions at 350 °C and water vapor saturation pressure, at 400 and at 450 °C and 500 bar using batch-type Inconel reactors. Erbium speciation was investigated as a function of pH from 2.8 to 8, where Er chloride species are predominant at acidic conditions (pH <3) and Er hydroxyl complexes are predominant at near- neutral to alkaline conditions (pH >3). At pH 7–9, the measured ErPO 4 solubility (-9.8 to -7.5 log m Er ) is up to 2.5 orders of magnitude lower than thermodynamic predictions (-9.4 to -6.7 log m Er ) using existing thermodynamic databases. At pH 2–3, the predicted ErPO 4 solubility is ~0.5 orders of magnitude higher at 350 °C and ~1 order of magnitude lower at 450 °C compared to experimentally measured Er concentrations. The thermodynamic properties of aqueous Er species were therefore revised in this study. The partial molal Gibbs energy of formation (Δ f G 0 T,P ) for aqueous Er hydroxyl and chloride species are optimized using GEMSFITS and the logarithmic formation constants (logβ n ( Cl,OH) ) were derived at each experimental temperature and pressure. The updated thermodynamic properties for Er hydroxyl species (Er(OH) +2 , Er(OH) 2 + , and Er(OH) 3 0 ) show that their stability shifts to more acidic conditions at and below 400 °C. The Er chloride species (ErCl +2 and ErCl 2 + ) show increased stability compared to Er hydroxyl species at temperatures of 450 °C and 0.01 mol/kg NaCl. The updated thermodynamic properties are implemented into the GEM-Selektor modeling package to investigate the mobility of Er in saline hydrothermal fluids in equilibrium with alkaline rocks. Importantly, the updated properties for Er hydroxyl species result in low Er solubility at rock equilibrated pH conditions due to an expanded hydroxyl predominance zone, but lower aqueous complex stability overall, whereas previous models suggest greater stability for aqueous Er species. Furthermore, ErPO 4 solubility increases with decreasing temperature due to the deprotonation of HCl, which increases the acidity of hydrothermal fluids and the availability of Cl - to complex with the REE. These simulations highlight how fluid-rock reaction and temperature affect the mobility of REE in hydrothermal ore-forming systems.

58 GEOSCIENCES↗

The solubility of NdPO 4 and DyPO 4 and stability of Nd and Dy chloride and hydroxyl complexes as a function of pH and salinity to 450 °C

The mobility of rare earth elements (REE) in geological systems is often controlled by the stability of monazite and xenotime, which are important hosts for the light and heavy REE. These REE phosphates constitute important resources and provide information on ore formation conditions and timing due to their uses as geothermometers and geochronometers. While the thermodynamic properties for these minerals are well-established up to high temperature and pressure, the properties for the aqueous REE complexes are not well constrained with limited information up to 300 °C. In this study, the solubility of synthetic NdPO 4 and DyPO 4 endmembers were measured in hydrothermal sub- to supercritical NaCl-bearing aqueous solutions from 350 at saturated water vapor pressure to 450 °C at 700 bar. The speciation of Nd and Dy was determined in acidic to alkaline solutions (pH 25 °C values from 2 to 10), and indicates that the hydroxyl species REE(OH) 2 + and REE(OH) 3 0 predominate at low salinity (0.01 mol/kg NaCl) with some contribution of REE chloride species REECl 2+ and REECl 2 + in acidic fluids. The REE phosphate solubility measured in these experiments is up to two orders of magnitude higher than predicted using existing thermodynamic properties from literature for aqueous species extrapolated from lower temperature data to supercritical conditions. To address this discrepancy, the thermodynamic properties of the REE aqueous species were optimized using GEMSFITS to derive the formation constants for the REE chloride (β Cl ) and hydroxyl (β OH ) complexes in the studied temperature range. This study highlights the importance of the hydroxyl species REE(OH) 2 + and REE(OH) 3 0 over a wide range of pH and temperature. As a result, the revised thermodynamic properties for Dy and Nd chloride and hydroxyl species more accurately predict the solubility of NdPO 4 and DyPO 4 and provide insight into the speciation and mobility of the light and heavy REE in hydrothermal supercritical fluids in the crust.

58 GEOSCIENCES↗

Effects of reduction in porosity and permeability with depth on storage capacity and injectivity in deep saline aquifers: A case study from the Mount Simon Sandstone aquifer

The Upper Cambrian Mount Simon Sandstone is recognized as a deep saline reservoir that has significant potential for geological sequestration in the Midwestern region of the United States. Porosity and permeability values collected from core analyses in rocks from this formation and its lateral equivalents in Indiana, Kentucky, Michigan, and Ohio indicate a predictable relationship with depth owing to a reduction in the pore structure due to the effects of compaction and/or cementation, primarily as quartz overgrowths. The regional trend of decreasing porosity with depth is described by the equation: Φ(d) = 16.36×e -0.00039*d , where Φ is the porosity and d is the depth in m. The decrease of porosity with depth generally holds true on a basinwide scale. Bearing in mind local variations in lithologic and petrophysical character within the Mount Simon Sandstone, the source data that were used to predict porosity were utilized to estimate the pore volume available within the reservoir that could potentially serve as storage space for injected CO 2 . The potential storage capacity estimated for the Mount Simon Sandstone in the study area, using efficiency factors of 1%, 5%, 10%, and 15%, is 23,680, 118,418, 236,832, and 355,242 million metric tons of CO 2 , respectively.

58 GEOSCIENCES↗

High-salinity brine desalination with amine-based temperature swing solvent extraction: A molecular dynamics study

Solvent extraction desalination (SED) is a promising technique for efficiently treating high salinity brines. However, only a few studies in the literature have investigated the influence of the molecular characteristics of the organic solvents on the emergent performance of the separation process. Thus, in this work we investigate the influence of the molecular structure of four different secondary amines on the desalination process of a concentrated aqueous solution of NaCl. Molecular dynamics simulations and free energy calculations are used to obtain the thermodynamic and structural properties of the pure solvent bulk phase, as well as a homogeneous solvent-water bulk mixture. Furthermore, solvent-water and solvent-brine interfacial systems are used to explicitly analyze the water partitioning behavior in the relevant temperature range for SED. The water solubilization in these secondary amines is found to be an exothermic process. Additionally, although the hydrogen-bonding interaction between the water and solvent molecules are beneficial, this interaction is not necessarily the dominant factor for ranking the water solubility performance of the different solvents. Finally, the excess volume of mixing of the bulk solvent-water mixture, as well as the electrostatic surface features of the solvents are also found to provide important clues for screening solvent behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unsteady- and Steady-State Relative Permeability Study with X-ray and Acoustic Monitoring for CO 2 Storage in Deep Saline Aquifers

In this study, we link the multiphase flow measurements with controls of sedimentary structures (e.g., heterogeneity and anisotropy) on relative permeability to variations in ultrasonic velocities for two deep saline aquifer formations (Entrada and Bluff Sandstones) in the San Juan Basin of the Southwestern USA. The rock specimens were extracted from outcrop sites near Durango, CO, USA. They have distinct differences in grain size, cementation composition, and individual chemical amounts, despite both formations being eolian sandstones. We performed a series of unsteady- and steady-state CO 2 -brine relative permeability experiments under capillary-controlled displacement rates. Unsteady-state experiments were conducted at 71 °C and 9.65 MPa; steady-state experiments were conducted at 85 °C and 22.8 MPa and 89 °C and 24.1 MPa for the Bluff and Entrada Sandstones, respectively. During the unsteady experiments, X-ray computed tomography was used to visualize multiphase flow in porous media and quantify saturations during brine drainage under various flow rates. Scan images and saturation profiles indicate that the CO 2 distribution in the pore volume was strongly impacted by the presence of high-angle cross-laminations, heterogeneous rock structure, and direction of bedding orientation. Those factors contribute to dramatic and quick initial breakthroughs and affect the overall saturation dynamics. Steady-state relative permeability tests were conducted at net flow rates of 1 mL/min for both brine drainage and imbibition. During the experimental steps, the CO 2 fractional flow was increased and decreased for both drainage and imbibition scenarios to mimic the front when CO 2 contacts brine and behind the front when brine enters space previously occupied by CO 2 . It was found that compressional velocity decreased, while shear waves slightly increased as brine saturation decreased. The hysteresis effects for the relative permeability and acoustic velocities were distinct. Furthermore, the CO 2 /brine front stability is quantified by applying a mobility ratio approach to spot saturations at which the boundary line between fluids becomes uneven. The results presented in this work can potentially boost the quality and precision of forecasts for the CO 2 storage projects in which the vertical and horizontal core-scale heterogeneity and anisotropy impact the plume migration within host reservoirs.

carbon dioxide (CO2)↗

Calcium Ion Bridging of Aqueous Carboxylates onto Silica: Implications for Low-Salinity Waterflooding

Release of crude oil from reservoir rock by low-salinity waterflooding is thought to occur by decreasing the advancing crude oil/brine/rock water contact angle to depin three-phase contact lines (i.e., by increasing reservoir water wettability). Crude oil likely adheres locally to reservoir rock asperities by deposition of asphaltene agglomerates formed at the crude oil/brine interface, following collapse of protective water films. One mechanism proposed for asphaltene adhesion and subsequent release is ion bridging of asphaltenic carboxylate groups protruding through molecularly thin water layers to calcium-occupied rock surface exchange sites, the so-called multicomponent ion exchange mechanism. To our knowledge, however, no experimental evidence directly establishes divalent cation bridging of aqueous carboxylates to anionic mineral surfaces. Using a quartz crystal microbalance with dissipation, we measure adsorption of aqueous carboxylates (benzoate, pentanoate, and hexanoate) onto silica, with and without calcium ion present at near-neutral pH. We find little to no adsorption on a silica surface to within the detection limit of our measurement (±1 Hz, 0.18 mg/m 2 ). Modeling of the silica surface chemistry, using classical ion-complexing triple-layer formalism, reveals that less than 10% of surface-hydroxylated sites actually ionize at pH 7. Of these, not all bind calcium ions. Accordingly, the calcium ion surface density is insufficient to reverse the negative surface charge of silica or to promote significant ion bridging of aqueous carboxylates. In so far as aqueous-soluble carboxylic acids mimic those incorporated in crude oil asphaltenes, we conclude that calcium ion bridging alone does not adhere asphaltenes to silica surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance Evaluation of a High Salinity Produced Water Treatment Train: Chemical Analysis and Aryl Hydrocarbon Activation

Water scarcity and increased energy demands have put a strong focus on improving industries at the heart of the water–energy nexus. Treatment of oil and gas produced water (PW) can help reduce freshwater consumption during hydraulic fracturing, especially in arid regions, while also removing harmful contaminants from entering the environment. However, it is also difficult to treat because PW contains high concentrations of many environmentally toxic contaminants, which require complex and expensive treatment processes to achieve their removal. To demonstrate the possibility of PW treatment and reuse in the O&G industry, a comprehensive environmental toxicity and water quality analysis throughout a five-process treatment train was performed on high salinity (>120 g/L) Permian basin raw PW. Here, the concentrations of naturally occurring radioactive materials were reduced by over 99%, total organic carbon was reduced by 93%, and inorganic constituents, including total dissolved solids, were reduced by over 99%. Compounds that induced the aryl hydrocarbon receptor and caused cytotoxicity in MCF-7 cells were also removed. Overall, the results of this study show that a short treatment train (five distinct unit processes) can be effective in treating PW to a level suitable for use outside of the oil industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoporous Carbon for Capacitive Deionization of Saline Water

Self-assembled mesoporous carbon (MC) materials have been synthesized and tested for application in capacitive deionization (CDI) of saline water. MC was prepared by self-assembly of a triblock copolymer with hydrogen-bonded chains via a phenolic resin, such as resorcinol or phloroglucinol in acidic conditions, followed by carbonization and, in some cases, activation by KOH. Carbon synthesized in this way was ground into powder, from which activated MC sheets were produced. In a variation of this process, after the reaction of triblock copolymer with resorcinol or phloroglucinol, the gel that was formed was used to coat a graphite plate and then carbonized. The coated graphite plate in this case was not activated and was tested to serve as current collector during the CDI process. The performance of these MC materials was compared to that of carbon aerogel for salt concentrations ranging between 1000 ppm and 35,000 ppm. Resorcinol-based MC removed up to 15.2 mg salt per gram of carbon, while carbon aerogel removed 5.8 mg salt per gram of carbon. Phloroglucinol-based MC-coated graphite exhibited the highest ion removal capacity at 21 mg of salt per gram of carbon for 35,000 ppm salt concentration.

54 ENVIRONMENTAL SCIENCES↗

Capacitive Deionization of High-Salinity Solutions

Desalination of high salinity solutions has been studied using a novel experimental technique and a theoretical model. Neutron imaging has been employed to visualize lithium ions in mesoporous carbon materials, which are used as electrodes in capacitive deionization for water desalination. Experiments were conducted with a flow-through capacitive deionization cell designed for neutron imaging and with lithium chloride ( 6 LiCl) as the electrolyte. Sequences of neutron images have been obtained at a relatively high concentration of lithium chloride ( 6 LiCl) solution to provide information on the transport of ions within the electrodes. A new model that computes the individual ionic concentration profiles inside mesoporous carbon electrodes has been used to simulate the capacitive deionization process. Modifications have also been introduced into the simulation model to calculate results at high electrolyte concentrations. Experimental data and simulation results provide insight into why capacitive deionization is not effective for desalination of high ionic-strength solutions. The combination of experimental information, obtained through neutron imaging, with the theoretical model will help in the design of capacitive deionization devices, which can improve the process for high ionic-strength solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗