Search NASA⌕ Search

SEARCH · Search NASA

Results for “shared”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Sharing the 620-790 MHz band allocated to terrestrial television with an audio-bandwidth social service satellite system

A study was carried out to identify the optimum uplink and downlink frequencies for audio-bandwidth channels for use by a satellite system distributing social services. The study considered functional-user-need models for five types of social services and identified a general baseline system that is appropriate for most of them. Technical aspects and costs of this system and of the frequency bands that it might use were reviewed, leading to the identification of the 620-790 MHz band as a perferred candidate for both uplink and downlink transmissions for nonmobile applications. The study also led to some ideas as to how to configure the satellite system.

Smith, E. K.↗

Carrier-interference ratios for frequency sharing between frequency-modulated amplitude-modulated-vestigial-sideband television systems

For just perceptible interference, an FM television signal interfering with another FM television signal must have an average signal power that is 26 to 37 db less than the wanted signal power. For an AM-VSB television signal interfering with an FM television signal, the AM-VSB television's sync peak average power must be 18 to 31 db below the FM television signal's average power. Also, when an FM television signal interferes with an AM-VSB signal, the average signal power of the FM signal should be 56 to 59 db below the sync peak average power of the AM-VSB television signal. The range of power ratios occur as a result of different TV scenes used in the tests and different FM-signal frequency deviations used. All tests were performed using 525 line, system M, color-television signals.

Barnes, S. P.↗

Time-sharing switch for vacuum brazing

Switching unit changes power and cooling-water connections between two vacuum-brazing machines. It allows both units to be powered by single radio-frequency (RF) generator. One machine can be used for brazing while bell jar of other is being evacuated (20 minute process) in preparation for brazing or is being cooled after brazing (10 minute process).

Stein, J. A.↗

Panel D report: Standards needed to interconnect ADS pilots for data sharing in data formats and descriptions

Data exchange specifications and standards needed to facilitate the interchange of information between three pilot modes in an Applications Data Service program are addressed. In designing standards, the following considerations were considered important: (1) accessible, understandable Data Base Management Systems (DBMS) catalogs, (2) formatting conventions, (3) archival data records and data descriptions formats, (4) standardized terminology, and (5) optimization of data formats by individual DBMS.

Source record↗

The effects of cuing in time-shared tasks

The results of two divided-attention experiments involving the editing of route-way-point displays on an avionics computer unit are reported. Two side tasks were required of the subjects, and either no cue, verbal cues appearing on the CRT, or symbolic cues (lights on the keyboard adjacent to keys to be used) were given to facilitate the primary editing task. Forty female and 30 male undergraduates were trained in the separate and combined tasks and divided randomly into groups of 25 for the cuing tests. A second test with three 10-subject groups was conducted at least one month later to investigate the efficacy of cuing for infrequently used procedures. It is found that only symbolic cuing significantly improved primary-task performance, increasing editing accuracy in the repetitive tests and reducing editing time in the delayed tests. Verbal cuing, probably because it requires additional cognitive effort, has no significant beneficial effect. These results are considered important for designing instruments for work environments requiring the performance of concurrent tasks, and as aircraft cockpits.

Chechile, R. A.↗

Measurement of the inertial constants of a rigid or flexible structure of arbitrary share through a vibration test

The inertial constants of an aircraft rocket, or of any other structure, are defined without materializing any rotating axis. The necessary equipment is very similar to that used normally for ground vibration tests. An elastic suspension is used to obtain the total natural modes corresponding to the motions of the structure as a solid. From the measurements of the generalized masses of these modes it is possible to compute the inertial constants: (1) center of inertia; (2) tensor of inertia; and (3) mass. When the structure is not strictly rigid a purification process, based on the mean square method makes it possible to rigidify it at the price of some approximations and a few more measurements. Eventual additional masses, that are not parts of the structure, can be taken into account.

Engrand, D.↗

Concurrent communication among multi-transceiver stations over shared media

In order to increase a local-area network's throughput beyond a single bus data rate without using dedicated switching nodes, multiple buses and multitransceiver stations are required. The design space of single-hop interconnections is explored among such stations. Interconnections are presented whose throughput can grow quadratically with the number of transmitters and receivers per station. These are referred to as selective broadcast interconnections (SBIs). The performance of various SBIs are studied. A spread-spectrum channel can accommodate several current successful transmission, and a single-transceiver node can thus utilize only a small fraction of the channel capacity. In order to allocate the appropriate fraction of capacity to a busy node, it is proposed to equip it with several transmitters and receivers, thereby turning it into a supernode. Several architectures and operation policies for supernodes are suggested and compared. It is shown that a supernode can significantly outperform a collection of independent conventional nodes with the same total numbers of transmitters and receivers. Packet-radio networks with half-duplex nodes, as well as networks with full-duplex nodes, are considered.

Birk, Yitzhak↗

Response modalities and time-sharing performance

An experiment performed to investigate the role of resource competition and asymmetric transfer in dual-task performance is described. It is shown that there is an advantage to mixed manual/speech response modality configurations that cannot be accounted for by asymmetric transfer. The present results support the multiple resources approach to the application of speech technology. Once speech recognition achieves an acceptable level of operational reliability, speech controls can be used to reduce resource competition and improve performance in multitask environments.

Vidulich, Michael A.↗

Performance modeling and measurement of real-time multiprocessors with time-shared buses

A closed queueing network model is constructed to address workload effects on computer performance for a highly reliable unibus multiprocessor used in real-time control. The queueing model consists of multiserver nodes and a nonpreemptive priority queue. Use of this model requires partitioning the workload into task classes. The time average steady-state solution of the queueing model directly produces useful results that are necessary in performance evaluation. The model is experimentally justified with the Fault-Tolerant Multiprocessor (FTMP) located at the NASA AIRLAB. Extensive experiments are performed on FTMP with a synthetic workload generator (SWG) to directly measure performance parameters, such as processor idle time, system bus contention, and task processing times. These measurements determine values for parameters in the queueing model. Experimental and analytic results are then compared.

Woodbury, Michael H.↗

Speech responses and dual-task performance - Better time-sharing or asymmetric transfer?

The value of speech controls in a dual-task experiment that also evaluated asymmetric transfer effects is considered. There was no evidence of asymmetric transfer in spite of significant effects supporting the advantage of mixing manual and speech responses. The data suggest that speech controls can be used to enhance performance in operational multiple-task environments.

Vidulich, Michael A.↗

Paralleling power MOSFETs in their active region: Extended range of passively forced current sharing

A simple passive circuit that improves current balance in parallelled power MOSFETs that are not precisely matched and that are operated in their active region from a common gate drive are exhibited. A nonlinear circuit consisting of diodes and resistors generates the differential gate potential required to correct for unbalance while maintaining low losses over a range of current. Also application of a thin tape wound magnetic core to effect dynamic current balance is reviewed, and a simple theory is presented showing that for operation in the active region the branch currents tend to revert to their normal unbalanced values even if the core is not driven into saturation. Results of several comparative experiments are given.

Niedra, Janis M.↗

Dynamic load-sharing using predicted process resource requirements

Heuristics which use predicted process resource requirements to make scheduling decisions are proposed. Four heuristics are presented. The first two, MINQ and SMPL, employ centralized scheduling and the remaining two, DMINQ and FDMINQ, use distributed scheduling. These heuristics are first compared against random scheduling and then against two conventional heuristics, CENTEX and DISTED, which schedule processes solely based on system state information. Results based on trace-driven simulations show that the proposed centralized heuristics offer significantly improved mean response time and they require fewer status update messages. In experiments using the same status update rates, SMPL response times were, on the average, 22 percent lower than those for CENTEX; MINQ response times were, on the average, 18 percent lower. The simulations also showed that MINQ and SMPL can perform as well as, or better than, CENTEX while using up to 70 percent fewer status update messages. The use of fewer status update messages imposes less overhead on the system. The use of prediction for distributed scheduling produced similar results. When prediction was used to filter small processes and execute them locally a 50 percent improvement in response times was obtained.

Goswami, Kumar K.↗