Search NASA⌕ Search

SEARCH · Search NASA

Results for “simple”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

A Simple Analytical Model for Predicting the Detectable Ion Current in Ion Mobility Spectrometry Using Corona Discharge Ionization Sources

Corona discharge ionization sources are often used in ion mobility spectrometers (IMS) when a non-radioactive ion source with high ion currents is required. Typically, the corona discharge is followed by a reaction region where analyte ions are formed from the reactant ions. In this work, we present a simple yet sufficiently accurate model for predicting the ion current available at the end of this reaction region when operating at reduced pressure as in High Kinetic Energy Ion Mobility Spectrometers (HiKE-IMS) or most IMS-MS instruments. It yields excellent qualitative agreement with measurement results and is even able to calculate the ion current within an error of 15%. Additional interesting findings of this model are the ion current at the end of the reaction region being independent from the ion current generated by the corona discharge and the ion current in High Kinetic Energy Ion Mobility Spectrometers (HiKE-IMS) growing quadratically when scaling down the length of the reaction region. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Impact of Ceramic Substrates Geometry on the Performance of Simple Thermo-Acoustic Engines

This work experimentally examines the influence of the stack geometry and position on the performance of thermo-acoustic engines (TAE). Twenty cordierite honeycomb ceramic stacks with square pores and five different lengths (7, 13, 17, 22 and 25 mm) were considered. Measurements were taken at seven different locations of the stack hot ends from the pressure antinode (closed end), namely 52, 72, 92,112, 132, 152 and 172 mm respectively. The temperature difference across the stack and radiated sound pressure level at steady state are considered indicators of the performance of the device. The results obtained with a simple standing wave thermo-acoustic engine used in this experiment reveals that the relationships between the length, the stack pores sizes and the input power are non-linear. In addition, the effect of the viscous resistance and the thermal losses were confirmed to be strong enough when the input heating power is low.

42 ENGINEERING↗

Enforcing global constraints for the dispersion closure problem: τ 2 -SIMPLE algorithm

Permeability and effective dispersion tensors are critical parameters to characterize flow and transport in porous media at the continuum scale. Homogenization theory defines a framework in which such effective properties are first computed from solving a closure problem in a repeating unit cell of the periodic microstructure and then used in a macroscopic formulation for efficient computation. The closure problem is formulated as a local boundary value problem subjected to global constraints, which guarantee the uniqueness of the solution and can be difficult to satisfy for complex geometries and at high flow conditions. These constraints also ensure that pore-scale pressure, velocity, and concentration fields can be accurately reconstructed from the closure variable. Building on a previous work, here we present a framework that allows to satisfy global constraints associated to both the permeability and the dispersion closure problems by introducing two artificial time scales. The algorithm, called τ 2 -SIMPLE, computes both permeability and effective dispersion given an arbitrarily complex geometry and flow condition. Furthermore, this algorithm is demonstrated to be accurate for both 2D and 3D geometries across varying flow conditions, and thus it can be used to quickly characterize effective properties from porous media images in many applications.

97 MATHEMATICS AND COMPUTING↗

Effects of the Gill-Solent WindMaster-Pro “w-boost” firmware bug on eddy covariance fluxes and some simple recovery strategies

In late 2015 and early 2016, work done by the AmeriFlux Management Project Technical Team (amerilfux.lbl.gov) helped to uncover an issue with Gill WindMaster and WindMaster Pro sonic anemometers used by many researchers for eddy covariance flux measurements. Gill has addressed this issue and has since sent out a notice that the vertical wind speed component (a critical piece of all eddy covariance fluxes) was being erroneously computed and reported. The problem (known as the “w-boost” bug) ended in positive (upward) wind speeds being under-reported by 16.6% and negative (downward) wind speeds being under-reported by 28.9%. This has the possibility to cause similar under estimates in fluxes derived from measurements using these instruments. Additionally, the bug affects corrections for angle of attack as derived by Nakai and Shimoyama, rendering them invalid. Although the manufacturer has offered a firmware upgrade for existing instruments that will fix this issue, many existing data sets have been affected by it and are currently in use by the scientific community. To address the issue of affected data, currently in use, we analyzed multi-year and short-term data sets from a variety of ecosystems to assess methods of correcting existing flux data. We found that simple multiplicative correction factors (~1.18) may be used to remove most of the “w-boost” bias from fluxes in existing data sets that do not include angle of attack corrections.

54 ENVIRONMENTAL SCIENCES↗

Simple condensation of composite bosons in a number conserving approach to many fermion-systems

We recently proposed an exact bosonization procedure which generates a Hamiltonian of composite bosons interacting among themselves and with fermionic quasiparticles. The interaction among composites whose mixing is allowed by symmetries is strong, but a simple condensate cannot have a significant mixing with other composites. We determine the conditions of decoupling, study their effects and compare the results with the Random Phase Approximation and the BCS theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

When are two fermions a simple boson? New Gross–Pitaevskii actions for cold Fermi condensates

The BEC regime of a cold fermi gas is characterised by coupled atoms (dimers) which, superficially, look like elementary bosons. We examine how simply-bosonic they really are; firstly, in the Bogoliubov approximation and further, through new actions for the BEC regime in which dimers are represented by coupled Gross–Pitaevskii fields. We find identity at the level of the Bogoliubov approximation in the deep BEC regime, permitting a simple Gross–Pitaevskii description. This fails rapidly as we move towards the BCS regime. However, even in the deep BEC regime there is an intrinsic difference if we go beyond the Bogoliubov approximation. To exemplify this we construct vortex solutions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A simple centrifuge cell method for ex situ quantification of electrical conductivity of slurry electrode materials

We present the design, experimental procedure, and experimental evaluation of a system for fast, simple, and ex situ characterization of electrical conductivity of slurry electrode materials. The system uses a custom-designed electrochemical cell compatible with centrifugation in a swing-bucket centrifuge. The cell features cylindrical graphite electrodes that are partially sheathed so as to expose only 2 mm of the electrode surface to the bottom region of the packed particulate pellet. Also presented is a conduction model that provides a shape factor for estimating effective conductivity. We tested aqueous solutions of carbon black (CB), activated carbon (AC), and mixtures thereof. These particles were dispersed in 0.0 and 0.5 M NaCl solutions. Measurements show that the effective conductivity initially increases linearly with pellet mass and then saturates at higher masses. Notably, CB exhibited a fivefold increase in conductivity than AC at equal pellet masses. CB/AC mixtures at a fixed pellet mass were tested with CB mass fractions of 0 to 100%. Interestingly, the mixture conductivity was found to be a non-monotonic function of CB mass fraction, with a maximum conductivity at about 60 % CB mass fraction. At this maximum, the mixture conductivity is approximately 30 % higher than pure CB. NaCl concentration in the slurry solution had no effects on conductivity. These results highlight the interactions between slurry electrode composition and compaction, offering insights for optimizing slurry electrodes. Furthermore, the system and results may also be applicable to evaluation of particulate materials (including slurries) used for Li-ion batteries, capacitive deionization, fuel cells, and flow electrodes.

Capacitive deionization↗

Autogenous healing of sea-water exposed mortar: Quantification through a simple and rapid permeability test

Concrete has an autogenous ability to heal cracks potentially contributing to its functional water tightness and durability. Here, we quantify the crack-healing capacity of sea-water submerged mortar specimens through a simple and rapid permeability test. Defined crack width geometries were created in blast furnace slag cement specimens allowing healed specimens to be quantified against unhealed specimens. Specimens with 0.2 mm wide cracks were not permeable after 28 days submersion. Specimens with 0.4 mm cracks had decreases in permeability of 66% after 28 days submersion, and 50–53% after 56 days submersion. Precipitation of aragonite and brucite in the cracks was the main cause of crack healing. Healing potential was dependent on the initial crack width, thermodynamic considerations and the amount of ions available in the crack. To our knowledge, this is the first study to quantify the functional autogenous healing capacity of cracked sea-water exposed cementitious specimens.

36 MATERIALS SCIENCE↗

A simple method to measure the isosteric energy of adsorption

The effect of temperature on water vapour desorption isotherms can be described simply using the Clausius-Clapeyron equation and the isosteric energy of adsorption, the latter conventionally estimated using two (or more) isotherms obtained at different temperatures. This approach has some disadvantages, however, and this article puts forward a simple alternative methodology for characterising this isosteric energy experimentally. Our method is based on monitoring the relative humidity of a cementitious material heated under sealed conditions. The evolution of the relative humidity as a function of temperature makes it possible to directly evaluate the isosteric energy. In practice, the tests are performed using a cell of the type that is used for self-desiccation studies.

36 MATERIALS SCIENCE↗

A simple theoretical analysis of the pyrolysis of an isothermal particle of coal

The pyrolysis of particles of coal (or biomass), small enough for internal conduction of heat not to be a controlling factor, is considered. Altogether five dimensionless groups are identified as characterising both the rates of pyrolysis and the change in temperature of these small isothermal particles. A sensitivity analysis demonstrates that three dimensionless groups easily have most influence on the kinetics of pyrolysis. This enables a simple mathematical model to be formulated, but assuming that only one reaction for thermal decomposition occurs at a time. The heat of devolatilisation is not ignored. It is found that, if the temperature around such a pyrolysing particle exceeds a threshold value, external heat transfer controls the rate of pyrolysis. In fact, whether there is kinetic or external heat transfer control is mainly determined by the two dimensionless groups 3Nuk{sub l},{sub 8} /2A{rho}{sub c,o} anti Cr{sub o}{sup 2} (a modification of the ratio of the characteristic times for chemical reaction and a coal particle to heat up) and RT{sub 8}/E{sub v}. Thus, for kinetic control RT{sub 8}/E{sub v} must be smaller than a critical value, i.e.E{sub v} has to exceed a threshold value. The third important group, R{delta}H{sub v}/ anti CE{sub v} has less influence. Under kinetic control, a particle's temperature is close to the ambient temperature and consequently does not change during thermal decomposition, whereas, when external heat transfer controls, the particle's temperature can rise during pyrolysis by up to 100 K. The mean value of the activation energy for the devolatilisation of many coals is deduced to be {approx}240 kJ/mol, i.e. higher than many measured values, which appear to have been obtained, when heat transfer controlled the rate. The temperature during pyrolysis of these ''thermally thin particles'' is not altered significantly by fragmentation, swelling or a change of shape. (author)

01 COAL, LIGNITE, AND PEAT↗

The Materials Application Programming Interface (API): A simple, flexible and efficient API for materials data based on REpresentational State Transfer (REST) principles

Here in this paper, we describe the Materials Application Programming Interface (API), a simple, flexible and efficient interface to programmatically query and interact with the Materials Project database based on the REpresentational State Transfer (REST) pattern for the web. Since its creation in Aug 2012, the Materials API has been the Materials Project's de facto platform for data access, supporting not only the Materials Project's many collaborative efforts but also enabling new applications and analyses. We will highlight some of these analyses enabled by the Materials API, particularly those requiring consolidation of data on a large number of materials, such as data mining of structural and property trends, and generation of phase diagrams. We will conclude with a discussion of the role of the API in building a community that is developing novel applications and analyses based on Materials Project data.

97 MATHEMATICS AND COMPUTING↗

A simple and practical process modeling methodology for pressure swing adsorption

Although many dynamic models exist for the design and simulation of pressure swing adsorption (PSA) processes, these models involve the solution of a complex system of coupled partial differential equations. Process engineers need a simple, practical, and yet robust short-cut model that helps decide whether to implement a PSA system in a process flowsheet. This work presents a “virtual” moving bed modeling methodology that considers only mass and energy balances and adsorption isotherms to describe the cyclic steady state behavior of PSA systems. Similar to tray efficiencies in distillation calculations, adsorption efficiencies are further introduced to account for system “non-ideality.” Finally, a lab-scale air separation system is used to illustrate the application of this modeling methodology.

42 ENGINEERING↗

Linearized self-consistent quasiparticle GW method: Application to semiconductors and simple metals

We present a code implementing the linearized self-consistent quasiparticle GW method (QSGW) in the LAPW basis. Our approach is based on the linearization of the self-energy around zero frequency which differs it from the existing implementations of the QSGW method. The linearization allows us to use Matsubara frequencies instead of working on the real axis. This results in efficiency gains by switching to the imaginary time representation in the same way as in the space time method. The all electron LAPW basis set eliminates the need for pseudopotentials. We discuss the advantages of our approach, such as its N 3 scaling with the system size N, as well as its shortcomings. We apply our approach to study the electronic properties of selected semiconductors, insulators, and simple metals and show that our code produces the results very close to the previously published QSGW data. Our implementation is a good platform for further many body diagrammatic resummations such as the vertex-corrected GW approach and the GW+DMFT method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SIMULATeQCD: A simple multi-GPU lattice code for QCD calculations

The rise of exascale supercomputers has fueled competition among GPU vendors, driving lattice QCD developers to write code that supports multiple APIs. Moreover, new developments in algorithms and physics research require frequent updates to existing software. These challenges have to be balanced against constantly changing personnel. At the same time, there is a wide range of applications for HISQ fermions in QCD studies. This situation encourages the development of software featuring a HISQ action that is flexible, high-performing, open source, easy to use, and easy to adapt. In this technical paper, we explain the design strategy, provide implementation details, list available algorithms and modules, and show key performance indicators for SIMULATeQCD, a simple multi-GPU lattice code for large-scale QCD calculations, mainly developed and used by the HotQCD collaboration. The code is publicly available on GitHub.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A simple and fast algorithm for estimating the capacity credit of solar and storage

Energy storage is a leading option to enhance the resource adequacy contribution of solar energy. Detailed analysis of the capacity credit of solar energy and energy storage is limited in part due to the data intensive and computationally complex nature of probabilistic resource adequacy assessments. This paper presents a simple algorithm for calculating the capacity credit of energy-limited resources that, due to the low computational and data needs, is well suited to exploratory analysis. Validation against benchmarks based on probabilistic techniques shows that it can yield similar insights. The method is used to evaluate the impact of different solar and storage configurations, particularly with respect to the strategy for coupling storage and solar photovoltaic systems. Furthermore, application of the method to a case study of utilities in Florida, where solar is rapidly growing and demand peaks in the winter and summer, demonstrates that it can improve on rules of thumb used in practice by some utilities. If storage is required to charge only from solar, periods of high demand driven by cold weather events accompanied by lower solar production can result in a capacity credit of solar and storage that is less than the capacity credit of storage alone.

14 SOLAR ENERGY↗

A simple model for estimating changes in rainfall erosivity caused by variations in rainfall patterns

Highlights: • A simple relationship was developed for predicting daily erosivity in changing climates. • The relationship depends on precipitation amount and maximum 0.5-h intensity I{sub 0.5} . • The relationship was calibrated using measured climate data and had a R{sup 2} of 0.99. • Simulated daily and annual erosivities were predicted with a R{sup 2} of 0.99 using the relationship. • The relationship was tested using I{sub 24}, showing a R{sup 2} of 0.78 for the simulated data. A major challenge when coupling soil loss models with precipitation forecasts from Global Circulation Models (GCMs) is that their time resolutions do not generally agree. Precipitation forecasts from GCM must be scaled down; however, the distribution of the rainfall intensity, which can affect soil loss as much as precipitation amounts, is usually not considered in this process. Therefore, the objective of this study was to develop a statistical equation for computing event-based rainfall erosivity under changing precipitation patterns using the least amount of information possible. For this purpose, an empirical equation for predicting event-based rainfall erosivity was developed using the product of the total precipitation P and the maximum 0.5-h rainfall intensity, I{sub 0.5}. This equation was calibrated using measured precipitation data from 28 sites in Central Chile and then tested with simulated data with different rainfall patterns from the CLIGEN (CLImate GENerator) weather generator. More than 53,000 rainfall events were analyzed, where the equation consistently provided R{sup 2} values of 0.99 for every dataset used, revealing its robustness when used in potential climate change scenarios in the study site. However, because computing I{sub 0.5} requires estimating precipitation at a high time resolution, the relationship was recalibrated and tested using 1 through 24-h maximum rainfall intensities. Using these intensities, the equation provided erosivity estimates with R{sup 2} ranging from 0.78 to 0.99, where better results were obtained as the resolution of the data increased. This study provides the methodology for building and testing the proposed equation and discusses its advantages and limitations.

54 ENVIRONMENTAL SCIENCES↗

SIMPLE-G: A multiscale framework for integration of economic and biophysical determinants of sustainability

We introduce SIMPLE-G, a Simplified International Model of agricultural Prices, Land use, and the Environment- Gridded version, which is a novel tool for evaluating sustainability policies in a global context while factoring in local heterogeneity in land and water resources and natural ecosystem services. This multi-scale model can provide boundary conditions for local decision makers, as well as capturing feedback from local policies to national and global scales. Additionally, to illustrate its value in environmental analysis, we provide two applications of the model. First, we quantify the local stresses on land and water resources due to global changes in population, income, and productivity. Second, we quantify the global impacts of local policy responses and adaptations to water scarcity.

42 ENGINEERING↗

Using simple PID-inspired controllers for online resilient resource management of distributed scientific workflows

Scientific workflows have become mainstream for conducting large-scale scientific research. As a result, many workflow applications and Workflow Management Systems (WMSs) have been developed as part of the cyberinfrastructure to allow scientists to execute their applications seamlessly on a range of distributed platforms. Although the scientific community has addressed this challenge from both theoretical and practical approaches, failure prediction, detection, and recovery still raise many research questions. In this paper, we propose an approach inspired by the control theory developed as part of autonomic computing to predict failures before they happen, and mitigated them when possible. The proposed approach is inspired on the proportional–integral–derivative controller (PID controller) control loop mechanism, which is widely used in industrial control systems, where the controller will react to adjust its output to mitigate faults. PID controllers aim to detect the possibility of a non-steady state far enough in advance so that an action can be performed to prevent it from happening. To demonstrate the feasibility of the approach, we tackle two common execution faults of large scale data-intensive workflows—data storage overload and memory overflow. We developed a simulator, which implements and evaluates simple standalone PID-inspired controllers to autonomously manage data and memory usage of a data-intensive bioinformatics workflow that consumes/produces over 4.4 TB of data, and requires over 24 TB of memory to run all tasks concurrently. Experimental results obtained via simulation indicate that workflow executions may significantly benefit from the controller-inspired approach, in particular under online and unknown conditions. Simulation results show that nearly-optimal executions (slowdown of 1.01) can be attained when utilizing our proposed method, and faults are detected and mitigated far in advance of their occurrence.

97 MATHEMATICS AND COMPUTING↗