Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Ion Beam Induced Surface Modulations from Nano to Pico: Optimizing Deposition During Erosion and Erosion During Deposition.

Ion beams of sufficient energy to erode a surface can lead to surface modulations that depend on the ion beam, the material surface it impinges, and extrinsic parameters such as temperature and geometric boundary conditions. Focused Ion Beam technology both enables site-specific placement of these modulations and expedites research through fast, high dose and small efficient use of material. The DualBeam (FIB/SEM) enables in situ metrology, with movies observing ripple formation, wave motion, and the influence of line defects. Nanostructures (ripples of >400nm wavelength to dots spaced <40nm) naturally grow from atomically flat surfaces during erosion, however, a steady state size may or may not be achieved as a consequence of numerous controlled parameters: temperature, angle, energy, crystallography. Geometric factors, which can be easily invoked using a FIB, enable a controlled component of deposition (and/or redeposition) to occur during erosion, and conversely allow a component of etching to be incurred during (ion-beam assisted) deposition. High angles of ion beam inclination commonly lead to 'rougher' surfaces, however, the extreme case of 90.0{sup o} etching enables deposition of organized structures 1000 times smaller than the aforementioned, video-recorded nanostructures. Orientation and position of these picostructures (naturally quantized by their atomic spacings) may be controlled by the same parameters as for nanostructures (e.g. ion inclination and imposed boundary conditions, which are flexibly regulated by FIB). Judicious control of angles during FIB-CVD growth stimulates erosion with directionality that produces surface modulations akin to those observed for sputtering. Just as a diamond surface roughens from 1-D ripples to 2-D steps with increasing angle of ion sputtering, so do ripples and steps appear on carbon-grown surfaces with increase in angle of FIB-CVD. Ion beam processing has been a stalwart of the microelectronics industry, is now a vital tool for research of self-organizing nanostructures, and promises to be a focus for future picotechnology.

36 MATERIALS SCIENCE↗

Geochemical rate processes at mineral-water interfaces: Linking molecular-scale surface properties to macroscopic observables

The project emphasis at WSU is on the understanding of the principal influences on surface chemistry, morphology, and kinetics of reactions of minerals in aqueous solutions. This emphasis, in the last project period has guided our efforts to the study of morphological relaxation in response to solution perturbations as well as to develop a methodology for creating on-demand etch pits for the purposes of generating specific step orientations on calcite surfaces. In the response of any mineral-water interface to changes in environmental conditions, dissolution and mineralization rates undergo rapid changes because the reaction rates at step edges are governed directly by these conditions. Our previous investigations of mineral dissolution have revealed that the topographic relaxation time under near equilibrium conditions can be much longer than the characteristic times of experimental investigations. The investigations described below are directed towards evaluating the effects of sample history, miscut and pretreatment on the observed dissolution behavior of our target mineral-water interface systems. In addition, we have developed a simple method for generating on-demand etch pits for the purposes of studying kinetically unstable step orientations.

Higgins, Steven R.↗

Turbocharger with variable nozzle having vane sealing surfaces

A variable nozzle for a turbocharger includes a plurality of vanes rotatably mounted on a nozzle ring and disposed in a nozzle flow path defined between the nozzle ring and an opposite nozzle wall. Either or both of the faces of the nozzle ring and nozzle wall include(s) at least one step that defines sealing surfaces positioned to be substantially abutted by airfoil surfaces of the vanes in the closed position of the vanes and to be spaced from the airfoil surfaces in positions other than the closed position. This substantial abutment between the airfoil surfaces and the sealing surfaces serves to substantially prevent exhaust gas from leaking past the ends of the airfoil portions. At the same time, clearances between the nozzle ring face and the end faces of the airfoil portions can be sufficiently large to prevent binding of the vanes under all operating conditions.

42 ENGINEERING↗

Calculations of oxide formation on low-index Cu surfaces

Density-functional theory is used to evaluate the mechanism of copper surface oxidation. Reaction pathways of O{sub 2} dissociation on the surface and oxidation of the sub-surface are found on the Cu(100), Cu(110), and Cu(111) facets. At low oxygen coverage, all three surfaces dissociate O{sub 2} spontaneously. As oxygen accumulates on the surfaces, O{sub 2} dissociation becomes more difficult. A bottleneck to further oxidation occurs when the surfaces are saturated with oxygen. The barriers for O{sub 2} dissociation on the O-saturated Cu(100)-c(2×2)-0.5 monolayer (ML) and Cu(100) missing-row structures are 0.97 eV and 0.75 eV, respectively; significantly lower than those have been reported previously. Oxidation of Cu(110)-c(6×2), the most stable (110) surface oxide, has a barrier of 0.72 eV. As the reconstructions grow from step edges, clean Cu(110) surfaces can dissociatively adsorb oxygen until the surface Cu atoms are saturated. After slight rearrangements, these surface areas form a “1 ML” oxide structure which has not been reported in the literature. The barrier for further oxidation of this “1 ML” phase is only 0.31 eV. Finally the oxidized Cu(111) surface has a relatively low reaction energy barrier for O{sub 2} dissociation, even at high oxygen coverage, and allows for facile oxidation of the subsurface by fast O diffusion through the surface oxide. The kinetic mechanisms found provide a qualitative explanation of the observed oxidation of the low-index Cu surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generalized Brønsted‐Evans‐Polanyi Relationships for Reactions on Metal Surfaces from Machine Learning

Abstract Brønsted‐Evans‐Polanyi (BEP) relationships, i. e., a linear scaling between reaction and activation energies, lie at the core of computational design of heterogeneous catalysts. However, BEPs are not general and often require reparameterization for each class of reactions. Here we construct generalized BEPs (gBEPs), which can predict activation energies for a diverse dataset of reactions of C, O, N and H containing molecules on metal surfaces. In a first step we develop a set of descriptors based on scaling relationships that can capture the change in chemical identity of reactants during the reaction. Subsequently, we use the reaction energy, these descriptors and a single descriptor for the surface structure to parameterize machine learning based regression approaches for the prediction of activation energies. The best approach we developed shows a Mean Absolute Error (MAE) of 0.11 eV for the training set (80 % of the data set) and 0.23 eV for the test set (20 % of the data set). The methodology presented here allows to calculate activation energies within fractions of seconds on a typical personal computer and due to its generality, accuracy and simplicity in application it might prove to be useful in transition metal catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Surface Roughness on the Electrochemical Reduction of CO 2 over Cu

We have investigated the role of surface roughening on the CO 2 reduction reaction (CO 2 RR) over Cu. The activity and product selectivity of Cu surfaces roughened by plasma pretreatment in Ar, O 2 , or N 2 were compared with that of electrochemically polished Cu samples. Differences in total and product current densities, the ratio of current densities for HER (the hydrogen evolution reaction) to CO 2 RR, and the ratio of current densities for C 2+ to C 1 products depend on the electrochemically active surface and are nearly independent of plasma composition. Theoretical analysis of an electropolished and roughened Cu surface reveals a higher fraction of undercoordinated Cu sites on the roughened surface, sites that bind CO preferentially. Roughened surfaces also contain square sites similar to those on a Cu(100) surface but with neighboring step sites, which adsorb OC-COH, a precursor to C 2+ products. Here, these findings explain the increases in the formation of oxygenates and hydrocarbons relative to CO and the ratio of oxygenates to hydrocarbons observed with increasing surface roughness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

2169 Steel Waveform Experiments

In support of LLNL efforts to develop multiscale models of a variety of materials, we have performed a set of eight gas gun impact experiments on 2169 steel (21% Cr, 6% Ni, 9% Mn, balance predominantly Fe). These experiments provided carefully controlled shock, reshock and release velocimetry data, with initial shock stresses ranging from 10 to 50 GPa (particle velocities from 0.25 to 1.05 km/s). Both windowed and free-surface measurements were included in this experiment set to increase the utility of the data set, as were samples ranging in thickness from 1 to 5 mm. Target physical phenomena included the elastic/plastic transition (Hugoniot elastic limit), the Hugoniot, any phase transition phenomena, and the release path (windowed and free-surface). The Hugoniot was found to be nearly linear, with no indications of the Fe α – ε phase transition. Releases were non-hysteretic, and relatively consistent between 3- and 5-mm–thick samples (the 3 mm samples giving slightly lower wavespeeds on release). Reshock tests with explosively welded impactors produced clean results; those with glue bonds showed transient releases prior to the arrival of the reshock, reducing their usefulness for deriving strength information. The free-surface samples, which were steps on a single piece of steel, showed lower wavespeeds for thin (1 mm) samples than for thicker (2 or 4 mm) samples. A configuration used for the last three shots allows release information to be determined from these free surface samples. The sample strength appears to increase with stress from ~1 GPa to ~ 3 GPa over this range, consistent with other recent work but about 40% above the Steinberg model.

Furnish, Michael David↗

Method for warning of radiological and chemical agents using detection paints on a vehicle surface

A paint that warns of radiological or chemical substances comprising a paint operatively connected to the surface, an indicator material carried by the paint that provides an indication of the radiological or chemical substances, and a thermo-activation material carried by the paint. In one embodiment, a method of warning of radiological or chemical substances comprising the steps of painting a surface with an indicator material, and monitoring the surface for indications of the radiological or chemical substances. In another embodiment, a paint is operatively connected to a vehicle and an indicator material is carried by the paint that provides an indication of the radiological or chemical substances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aerial vehicle with paint for detection of radiological and chemical warfare agents

A paint that warns of radiological or chemical substances comprising a paint operatively connected to the surface, an indicator material carried by the paint that provides an indication of the radiological or chemical substances, and a thermo-activation material carried by the paint. In one embodiment, a method of warning of radiological or chemical substances comprising the steps of painting a surface with an indicator material, and monitoring the surface for indications of the radiological or chemical substances. In another embodiment, a paint is operatively connected to a vehicle and an indicator material is carried by the paint that provides an indication of the radiological or chemical substances.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Paint for detection of radiological or chemical agents

A paint that warns of radiological or chemical substances comprising a paint operatively connected to the surface, an indicator material carried by the paint that provides an indication of the radiological or chemical substances, and a thermo-activation material carried by the paint. In one embodiment, a method of warning of radiological or chemical substances comprising the steps of painting a surface with an indicator material, and monitoring the surface for indications of the radiological or chemical substances. In another embodiment, a paint is operatively connected to a vehicle and an indicator material is carried by the paint that provides an indication of the radiological or chemical substances.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Growth mechanism and microstructure of low defect density InN (0001) In-face thin films on Si (111) substrates

Transmission electron microscopy has been employed to analyze the direct nucleation and growth, by plasma-assisted molecular beam epitaxy, of high quality InN (0001) In-face thin films on (111) Si substrates. Critical steps of the heteroepitaxial growth process are InN nucleation at low substrate temperature under excessively high N-flux conditions and subsequent growth of the main InN epilayer at the optimum conditions, namely, substrate temperature 400–450 °C and In/N flux ratio close to 1. InN nucleation occurs in the form of a very high density of three dimensional (3D) islands, which coalesce very fast into a low surface roughness InN film. The reduced reactivity of Si at low temperature and its fast coverage by InN limit the amount of unintentional Si nitridation by the excessively high nitrogen flux and good bonding/adhesion of the InN film directly on the Si substrate is achieved. The subsequent overgrowth of the main InN epilayer, in a layer-by-layer growth mode that enhances the lateral growth of InN, reduces significantly the crystal mosaicity and the density of threading dislocations is about an order of magnitude less compared to InN films grown using an AlN/GaN intermediate nucleation/buffer layer on Si. The InN films exhibit the In-face polarity and very smooth atomically stepped surfaces.

36 MATERIALS SCIENCE↗

Annual Mean Arctic Amplification 1970–2020: Observed and Simulated by CMIP6 Climate Models

While the annual mean Arctic Amplification (AA) index varied between two and three during the 1970–2000 period, it reached values exceeding four during the first two decades of the 21st century. The AA did not change in a continuous fashion but rather in two sharp increases around 1986 and 1999. During those steps the mean global surface air temperature trend remained almost constant, while the Arctic trend increased. Although the “best” CMIP6 models reproduce the increasing trend of the AA in 1980s they do not capture the sharply increasing trend of the AA after 1999 including its rapid step-like increase. We propose that the first sharp AA increase around 1986 is due to external forcing, while the second step close to 1999 is due to internal climate variability, which models cannot reproduce in the observed time.

54 ENVIRONMENTAL SCIENCES↗

Capsule Shimming Developments for National Ignition Facility (NIF) Hohlraum Asymmetry Experiments

Capsule drive in National Ignition Facility (NIF) indirect drive implosions is generated by x-ray illumination from cylindrical hohlraums. The cylindrical hohlraum geometry is axially symmetric but not spherically symmetric causing capsule-fuel drive asymmetries. We hypothesize that fabricating capsules asymmetric in wall thickness (shimmed) may compensate for drive asymmetries and improve implosion symmetry. Simulations suggest that for high compression implosions Legendre mode P 4 hohlraum flux asymmetries are the most detrimental to implosion performance. General Atomics has developed a diamond turning method to form a GDP capsule outer surface to a Legendre mode P 4 profile. The P 4 shape requires full capsule surface coverage. Thus, in order to avoid tool-lathe interference flipping the capsule part way through the machining process is required. This flipping process risks misalignment of the capsule causing a vertical step feature on the capsule surface. Recent trials have proven this step feature height can be minimized to ~0.25 µm.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Using regime analysis to identify the contribution of clouds to surface temperature errors in weather and climate models

Many global circulation models (GCMs) exhibit a persistent bias in the 2 m temperature over the midlatitude continents, present in short-range forecasts as well as long-term climate simulations. A number of hypotheses have been proposed, revolving around deficiencies in the soil–vegetation–atmosphere energy exchange, poorly resolved low-level boundary-layer clouds or misrepresentations of deep-convective storms. A common approach to evaluating model biases focuses on the model-mean state. However, this makes difficult an unambiguous interpretation of the origins of a bias, given that biases are the result of the superposition of impacts of clouds and land-surface deficiencies over multiple time steps. This article presents a new methodology to objectively detect the role of clouds in the creation of a surface warm bias. A unique feature of this study is its focus on temperature-error growth at the time-step level. It is shown that compositing the temperature-error growth by the coinciding bias in total downwelling radiation provides unambiguous evidence for the role that clouds play in the creation of the surface warm bias during certain portions of the day. Furthermore, the application of an objective cloud-regime classification allows for the detection of the specific cloud regimes that matter most for the creation of the bias. We applied this method to two state-of-the-art GCMs that exhibit a distinct warm bias over the Southern Great Plains of the USA. Our analysis highlights that, in one GCM, biases in deep-convective and low-level clouds contribute most to the temperature-error growth in the afternoon and evening respectively. In the second GCM, deep clouds persist too long in the evening, leading to a growth of the temperature bias. In conclusion, the reduction of the temperature bias in both models in the morning and the growth of the bias in the second GCM in the afternoon could not be assigned to a cloud issue, but are more likely caused by a land-surface deficiency.

54 ENVIRONMENTAL SCIENCES↗

Fischer-Tropsch synthesis: Direct cobalt nitrate reduction of promoted Co/TiO 2 catalysts

The effect of the direct reduction of cobalt nitrate versus the more conventional calcination/reduction treatment has been investigated. Porosity properties of the catalysts are not significantly modified by avoiding the calcination step, as similar BET surface area, pore volume and pore diameter are obtained for the activated catalysts. In contrast, the cobalt reducibility decreases, but smaller cobalt particles size and higher dispersion are obtained. The reduction phenomena occurring for the uncalcined catalysts are more complex because of the additional nitrate decomposition steps. TPR-MS and TPR-XANES point out that CoO x intermediate species are formed during the reductive nitrate decomposition. However, these species are oxidized by NO X (formed by nitrate decomposition) to spinel type Co 3 O 4 , which is then converted to CoO prior to the final reduction step to Co 0 . The addition of promoters (Pt, Re, Ru, Ag) improves the cobalt reducibility, especially by shifting the final reduction step (i.e., CoO to Co 0 ) to lower temperature. FT activity testing data show that activated uncalcined catalysts have higher CO conversion following the initial decline and leveling off period relative to the activated calcined catalyst. We find that the best performance is achieved with uncalcined Pt-12%Co/TiO 2 . This catalyst has the highest CO steady state conversion, which is 1.2 times higher than the Pt-promoted calcined catalyst. Moreover, its deactivation rate is 0.13%/h compared to 0.2%/h for the corresponding calcined catalyst. The difference in the catalytic activity is even higher for the un-promoted samples, where the activated uncalcined catalyst has almost double the CO conversion as compared to its calcined counterpart. Finally, the addition of other promoters such as Ru, Re and Ag has no significant effect on catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unraveling In-Situ Formation of Surface Nickel Nitride Structures in Plasma-Assisted Catalytic Ammonia Synthesis

We report the in situ formation of Ni nitride for plasma-assisted ammonia synthesis. Both the surface nitrogen concentration and the ammonia formation rate exhibit dependence on the N 2 :H 2 feed ratio. The maximum surface nitrogen concentration occurs at a N 2 :H 2 ratio of 4:1, and the maximum catalytic activity occurs at 2:1. In contrast, the formation of gas phase radicals is less sensitive to feed composition, indicating that Ni nitride is more kinetically relevant to ammonia production than gas-phase radicals. The plasma-induced formation of Ni nitride is therefore proposed to be a critical contributor to the synergistic effects in plasma-assisted catalytic ammonia synthesis. Additionally, Ni nitride alters the surface reaction mechanism of plasma-assisted ammonia synthesis, with the rate-determining-step (RDS) shifting to surface-bound NH 3 formation rather than N 2 activation at temperatures below 373 K. These findings provide mechanistic insight that opens opportunities for optimizing the performance of plasma-assisted catalytic ammonia synthesis

Ammonia↗