Search NASA⌕ Search

SEARCH · Search NASA

Results for “systems testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

TOPEX Microwave Radiometer Thermal Control: Post-System-Test Modifications and On-Orbit Performance

The Topex Microwave Radiometer has had an excellent thermal performance since launch. The instrument, however, went through a hardware modification right before launch to correct for athermal design inadequacy that was uncovered during the spacecraft thermal vacuum test. This paper reports on how the initially obscure problem was tracked down, and how the thermal models were revised, validated, and utilized to investigate the solution options and guide the hardware modification decisions. Details related to test data interpretation, analytical uncertainties, and model-prediction vs. test-data correlation, are documented. Instrument/spacecraft interface issues, where the problem originated and where in general pitfalls abound, are dealt with specifically. Finally, on-orbit thermal performance data are presented, which exhibit good agreement with flight predictions, and lessons learned are discussed.

Lin, Edward I.↗
NASA NTRSDate not supplied

Roman Space Telescope - Demonstration of Integrated Thermal Control System Test for the Optical Telescope

On-orbit optical stability of the Nancy Grace Roman Space Telescope (RST) is a key requirement that enables multiple science objectives and drives multiple aspects of telescope design and analysis. Thermoelastic changes are typically large contributors to optical instability, and both extremely low CTE materials and extremely stable temperatures are needed to achieve the RST optical stability requirements. We will present the results from a test that demonstrated the L3Harris capability to sense and control temperatures to milli-kelvin levels of stability across a range of operating temperatures.

RST, Roman Space Telescope, Temperature Sensing, T↗
NASA NTRS2022

RVLT Concept Vehicle Powertrain Arrangement Study and Candidate Powertrain System Test Arrangements

This work was motivated by the vision of the NASA’s Revolutionary Vertical Lift Technology (RVLT) Project and project goals to support the Urban Air Mobility mission. A RVLT concept vehicle, namely the side-by-side helicopter with hybrid electric propulsion, was selected to conduct a powertrain study. The specific objectives of this work were to explore powertrain designs for the RVLT side by side hybrid electric concept vehicle to assess powertrain configurations, and in the process identify general trends for design tradeoffs, technology barriers, and research needs. A notional powertrain for the vehicle was created, and this led to identifying some mechanical components for development and testing. Three powertrain component concepts designs were created, namely a pericyclic drive mast gearbox, a control clutch, and an overrunning cutch. The design approach and evolution are documented. A universal combining gearbox was conceived and designed that would extend the capability of a NASA test facility for testing and demonstration of technologies for urban air mobility vehicle powertrains. Candidate powertrain test arrangements as enabled by the proposed universal combining gearbox are explained and depicted.

gears↗
NASA NTRSDate not supplied

Roman Space Telescope – Demonstration of Integrated Thermal Control System Test for the Optical Telescope Assembly

On-orbit optical stability of the Nancy Grace Roman Space Telescope (RST) is a key requirement that enables multiple science objectives and drives multiple aspects of telescope design and analysis. Thermoelastic changes are typically large contributors to optical instability, and both extremely low CTE materials and extremely stable temperatures are needed to achieve the RST optical stability requirements. We will present the results from a test that demonstrated the L3Harris capability to sense and control temperatures to milli-kelvin levels of stability across a range of operating temperatures.

Peter Miller↗
NASA NTRS1973

Shuttle active thermal control system development testing. Volume 2: Modular radiator system tests

Tests were designed to investigate the validity of the "modular" approach to space radiator system design for space shuttle and future applications by gathering performance data on various systems comprised of different numbers of identical panels, subject to nominal and extreme heat loads and environments. Both one-sided and two-sided radiation was tested, and engineering data was gathered on simulated low a/e coatings and system response to changes in outlet temperature control point. The results of the testing showed system stability throughout nominal orbital transients, unrealistically skewed environments, freeze-thaw transients, and rapid changes in outlet temperature control point. Various alternative panel plumbing arrangements were tested with no significant changes in performance being observed. With the MRS panels arranged to represent the shuttle baseline system, a maximum heat rejection of 76,600 Btu/hr was obtained in segmented tests under the expected worst case design environments. Testing of an alternate smaller two-sided radiation configuration yielded a maximum heat rejection of 52,931 Btu/hr under the maximum design environments.

Scheps, P. B.↗
NASA NTRS2019

In-Space Robotic Assembly Joint Characterization Approach

This paper describes the test systems and approaches developed to characterize the performance of a structural joint that is intended for robotic in-space assembly (ISA). The design of the joint is based on a heritage concept from National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) originally intended for structural assembly by astronauts during extravehicular activity (EVA). Its design was modified under a public-private partnership and is intended to accelerate the availability of, and reduce costs for the infusion of NASA developed technologies into commercial ISA systems. Test systems were developed to measure the axial, bending, and torsional stiffness of the joint at a wide range of temperatures. A test system was also developed to measure the reliability of the joint in terms of translation and rotation when disassembled and re-assembled in space. These test systems were used to characterize the joint behavior and provide performance data for the iterative joint design process. The paper also lists the lessons learned to aid testing of next generation robotic in-space assembly joints.

Abraham, Nijo A.↗
NASA NTRS1973

Shuttle active thermal control system development testing. Volume 3: Modular radiator system test data correlation with thermal model

Results are presented of an analysis which compares the performance predictions of a thermal model of a multi-panel modular radiator system with thermal vacuum test data. Comparisons between measured and predicted individual panel outlet temperatures and pressure drops and system outlet temperatures have been made over the full range of heat loads, environments and plumbing arrangements expected for the shuttle radiators. Both two sided and one sided radiation have been included. The model predictions show excellent agreement with the test data for the maximum design conditions of high load and hot environment. Predictions under minimum design conditions of low load-cold environments indicate good agreement with the measured data, but evaluation of low load predictions should consider the possibility of parallel flow instabilities due to main system freezing. Performance predictions under intermediate conditions in which the majority of the flow is not in either the main or prime system are adequate although model improvements in this area may be desired. The primary modeling objective of providing an analytical technique for performance predictions of a multi-panel radiator system under the design conditions has been met.

Phillips, M. A.↗
NASA NTRS1974

Shuttle active thermal control system development testing. Volume 5: Integrated radiator/expendable cooling system tests

Tests were conducted to gather data on a space shuttle active control system (ATCS) incorporating both radiators and an expendable cooling device to provide vehicle heat removal. Two systems were tested and design information was provided for both nominal and limit conditions. The tests verified the concept that an integrated radiator/expendable cooling system can adequately maintain desired water quantities while responding to variations in heat loads and environments. In addition, the need for duct heating was demonstrated, while exhaust nozzle heating was also shown to be unnecessary.

Scheps, P. B.↗