Search NASA⌕ Search

SEARCH · Search NASA

Results for “technical issues”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

The cycle life chemistry of ambient-temperature secondary lithium cells

The Jet Propulsion Laboratory is involved in a NASA-sponsored research program to demonstrate the feasibility of ambient-temperature secondary lithium batteries for geosynchronous space applications. Encouraging cycle life has been demonstrated in sealed, cathode-limited laboratory cells. However, the cell capacity declines with cycle life. The results of recent studies of the lithium electrode passivation chemistry, and of conductive diluents for TiS2 cathodes and their possible contribution to capacity decline, are here presented. Technical issues associated with the unique operational requirements of a geosynchronous mission are also described.

Somoano, R.↗

SSME failure detection

During ground testing of the Space Shuttle Main Engine (SSME), there have been twenty-six major incidents resulting in substantial hardware damage and loss. Historical characteristics, advances in detection technology, and advances in computing technology led to plans for study of an advanced real time SSME test stand failure detection system which would reduce damage and preserve evidence when a failure with major incident potential occurs. This detection system will speed recognition of dangerous engine operation, and quicken the shutdown decision. The scope of this study, SSME characteristics, SSME test history, the problem definition, and some technical issues will be addressed herein.

Cikanek, H. A., III↗

International Symposium on Remote Sensing of Environment, Fourth Thematic Conference: Remote Sensing for Exploration Geology, San Francisco, CA, April 1-4, 1985, Proceedings. Volumes 1 & 2

State of the art applications of remote sensing in geological exploration programs are discussed along with research and development activities aimed at increasing the future capabilities of this technology for exploration geology. The topics considered include: technical issues in the state of the art; regional exploration models; remote sensing applications for hydrocarbon exploration; commercialization of remote sensing satellites; and data integration. Also addressed are: remote sensing applications for mineral exploration; geobotanical and environmental remote sensing; image processing techniques and applications; advanced sensors, radar, and airborne systems; and engineering, logistics, and marine applications.

Source record↗

AMTEC: High efficiency static conversion for space power

Future manned and unmanned space missions will require reliable, high efficiency energy conversion systems. For a manned Mars mission, power levels in the range of 10 to 100 kWe will be needed. The Alkali Metal Thermoelectric Converter (AMTEC) is a direct energy conversion technology with the potential to meet these needs. The AMTEC is a thermally regenerative electrochemical device that derives its operation from the sodium ion conducting properties of beta-alumina solid electrolyte (BASE). To date, an efficiency of 19%, area power density of 1 W/sq cm, and a lifetime of 10,000 hours at high temperature were demonstrated in laboratory devices. Systems studies show that projected AMTEC systems equal or surpass the performance of other static or dynamic systems in applications of 1 kWe-1 MWe. Thus, the laboratory experiments and applications studies conducted to date have shown that the AMTEC posseses great potential. In order to bring this technology to the stage where prototype units can be built and operated, several technical issues must be addressed. These include the need for long life, high power electrodes, minimization of radiative parasitic losses, and high temperature seals. In summary, the evidence shows that if AMTEC is developed, it can play a significant role in future space power applications.

Bankston, C. P.↗

Requirement analysis of an intelligent, redundant, actuation system

The reliability and fault tolerance requirements of integrated, critical, digital fly-by-wire control systems for advanced military and civil aircraft requires redundant, reconfigurable implementations of the actuation system. An effective way for controlling the actuators and implementing the required fault detection and reconfiguration strategies is by means of dedicated microprocessors. This paper describes a laboratory implementation of a flexible intelligent redundant actuation system capable of demonstrating the concept and analyzing a variety of configurations and technical issues.

De Feo, P.↗

Eye-voice-controlled interface

The Ocular Attention-Sensing Interface System (OASIS) is an innovative human-computer interface which utilizes eye movement and voice commands to communicate messages between the operator and the system. This report initially describes some technical issues relevant to the development of such an interface. The results of preliminary experiments which evaluate alternative eye processing algorithms and feedback techniques are presented. Candidate interface applications are also discussed.

Glenn, Floyd A., III↗

Analysis models for the estimation of oceanic fields

A general model for statistically optimal estimates is presented for dealing with scalar, vector and multivariate datasets. The method deals with anisotropic fields and treats space and time dependence equivalently. Problems addressed include the analysis, or the production of synoptic time series of regularly gridded fields from irregular and gappy datasets, and the estimate of fields by compositing observations from several different instruments and sampling schemes. Technical issues are discussed, including the convergence of statistical estimates, the choice of representation of the correlations, the influential domain of an observation, and the efficiency of numerical computations.

Carter, E. F.↗

Space Station gas-grain simulation facility - Application to exobiology

The technical issues involved in performing experiments on the behavior and properties of aerosols in a microgravity environment provided by the Space Station are reviewed. The displacement of a particle resulting from g-jitter for ballistic, Knudsen, and Stokes flow regimes is examined in detail, and the radiation, acoustic, electrostatic, and electromagnetic mechanisms for the control of this motion are described. The simulation of organic haze production on Titan has been selected as an example experiment for detailed study. The purpose of this experiment was to simulate the photolysis of methane and the subsequent formation of the organic haze particles in the Titan upper atmosphere.

Mckay, C. P.↗

Cost effective development of a national test bed

For several years, the Marshall Space Flight Center has pursued the coordinated development of a Large Space Structures (LSS) National Test Bed for the investigation of numerous technical issues involved in the use of LSS in space. The origins of this development, the current status of the various test facilities and the plans laid down for the next five years' activities are described. Particular emphasis on the control and structural interaction issues has been paid so far; however, immediately emerging are user applications (such as the proposed pinhole occulter facility). In the immediate future, such emerging technologies as smart robots and multibody interactions will be studied. These areas are covered.

Waites, H. B.↗

Fuel containment and damage tolerance in large composite primary aircraft structures. Phase 2: Testing

Technical issues associated with fuel containment and damage tolerance of composite wing structures for transport aircraft were investigated. Material evaluation tests were conducted on two toughened resin composites: Celion/HX1504 and Celion/5245. These consisted of impact, tension, compression, edge delamination, and double cantilever beam tests. Another test series was conducted on graphite/epoxy box beams simulating a wing cover to spar cap joint configuration of a pressurized fuel tank. These tests evaluated the effectiveness of sealing methods with various fastener types and spacings under fatigue loading and with pressurized fuel. Another test series evaluated the ability of the selected coatings, film, and materials to prevent fuel leakage through 32-ply AS4/2220-1 laminates at various impact energy levels. To verify the structural integrity of the technology demonstration article structural details, tests were conducted on blade stiffened panels and sections. Compression tests were performed on undamaged and impacted stiffened AS4/2220-1 panels and smaller element tests to evaluate stiffener pull-off, side load and failsafe properties. Compression tests were also performed on panels subjected to Zone 2 lightning strikes. All of these data were integrated into a demonstration article representing a moderately loaded area of a transport wing. This test combined lightning strike, pressurized fuel, impact, impact repair, fatigue and residual strength.

Sandifer, J. P.↗

Overview and future direction for blackbody solar-pumped lasers

A review of solar-pumped blackbody lasers is given which addresses their present status and suggests future research directions. The blackbody laser concept is one system proposed to scale to multimegawatt power levels for space-to-space power transmissions for such applications as onboard spacecraft electrical or propulsion needs. Among the critical technical issues are the scalability to high powers and the laser wavelength which impacts the transmission optics size as well as the laser-to-electric converter at the receiver. Because present blackbody solar-pumped lasers will have laser wavelengths longer than 4 microns, simple photovoltaic converters cannot be used, and transmission optics will be large. Thus, future blackbody laser systems should emphasize near visible laser wavelengths.

Deyoung, R. J.↗

Automated cataloging and characterization of space-derived data

One of the most significant technical issues that NASA must address and resolve is the problem of managing the enormous amounts of scientific and engineering data that will be generated by the next generation of remote sensing systems such as the Hubble Space Telescope (HST) and the Earth Observing System (EOS). The amount of data these sensors are expected to produce will be orders of magnitude greater than NASA has ever experienced. Consequently new solutions must be developed for managing, accessing, and automatically inputting the data into a database in some expressive fashion that will provide a meaningful understanding and effective utilization of this data in a multidisciplinary environment. Presently, scientific data provided by satellites and other sources are processed, cataloged, and archived according to narrow mission or project-specific requirements with little regard to the semantics of the overall research. Scientists therefore lack knowledge of or access to potentially valuable data outside their own field. What is needed is an innovative approach that will allow collected data to be automatically cataloged, characterized, and managed in a domain-community. A concept and design approach that employs expert system-based knowledge controllers combined with advanced spatial database systems and graphical data structures is discussed.

Campbell, William J.↗

Space Station ground data management system

KSC is planning a Space Station Ground Data Management System (GDMS) for support of functional interface verification, integration and test of Space Station modules and elements. This computer system, planned for initial operational support in 1992, currently is entering a definition and prototyping stage. This paper provides an overview of the GDMS system concept. It synopsizes system functional capabilities, and discusses software and hardware architectural approaches currently under evaluation. It identifies programmatic constraints and their influence upon the concept, as well as specific technical issues planned for study or evaluation via prototyping.

Heuser, Jan↗

Advanced radiator systems for space power

Space power systems generating powers of 1 MWe and higher will require new approaches in radiator design in order to reject large waste heat loads without the unmanageable weight burden of conventional pumped-loop radiator systems. This paper discusses recent design concepts for radiator systems which have the potential for reducing radiator mass by as much as an order of magnitude below the mass of conventional systems. These advanced concepts, including the heat pipe radiator, particle (dust and droplet) radiators, moving belt radiator, rotating membrane radiator, and several interesting variations of these, achieve low mass by reducing the armor requirement for protection against micrometeoroids. The design and performance of each of these concepts is discussed, along with technical issues which must be addressed to bring these concepts to fruition.

Mattick, A. T.↗

A Mars rover for the 1990's

Some technical issues concerning a Mars rover launched in the 1990s are discussed. Two particular modes of controlling the traveling of the vehicle are described. In one mode, most of the control is from earth, by human operators viewing stereo pictures sent from the rover and designating short routes to follow. In the other mode, computer vision is used in order to make the rover more autonomous, but reliability is aided by the use of orbital imagery and approximate long routes sent from earth. In the latter case, it is concluded that average travel rates of around 10 km/day are feasible.

Wilcox, Brian H.↗

Advanced extravehicular activity systems requirements definition study. Phase 2: Extravehicular activity at a lunar base

The focus is on Extravehicular Activity (EVA) systems requirements definition for an advanced space mission: remote-from-main base EVA on the Moon. The lunar environment, biomedical considerations, appropriate hardware design criteria, hardware and interface requirements, and key technical issues for advanced lunar EVA were examined. Six remote EVA scenarios (three nominal operations and three contingency situations) were developed in considerable detail.

Neal, Valerie↗

Workshop on Two-Phase Fluid Behavior in a Space Environment

The Workshop was successful in achieving its main objective of identifying a large number of technical issues relating to the design of two-phase systems for space applications. The principal concern expressed was the need for verified analytical tools that will allow an engineer to confidently design a system to a known degree of accuracy. New and improved materials, for such applications as thermal storage and as heat transfer fluids, were also identified as major needs. In addition to these research efforts, a number of specific hardware needs were identified which will require development. These include heat pumps, low weight radiators, advanced heat pipes, stability enhancement devices, high heat flux evaporators, and liquid/vapor separators. Also identified was the need for a centralized source of reliable, up-to-date information on two-phase flow in a space environment.

Swanson, Theodore D.↗

Doppler lidar wind measurements on the EOS - LAWS

This paper discusses the efforts currently underway to prepare for the deployment of the Laser Atmospheric Wind Sounder (LAWS) instrument on an Earth Observing System (EOS) polar orbiter and on the Space Station. Attention is given to the measurement techiques, which include ground-based and airborne measurements in the atmosphere, and to the scientific and the technical issues being addressed. Global wind profiles obtained with the LAWS will effect dramatic improvement in numerical weather prediction and will be useful in determining the midtroposphere steering currents that are important in hurricane track forecasts. The global wind data will also provide information on large-scale atmospheric circulation and climate dynamics and on biogeochemical and hydrologic cycles.

Fitzjarrald, Daniel E.↗