Search NASA⌕ Search

SEARCH · Search NASA

Results for “three component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Analysis of low altitude atmospheric turbulence data measured in flight

All three components of turbulence were measured simultaneously in flight at each wing tip of a Beech D-18 aircraft. The flights were conducted at low altitude, 30.5 - 61.0 meters (100-200 ft.), over water in the presence of wind driven turbulence. Statistical properties of flight measured turbulence were compared with Gaussian and non-Gaussian turbulence models. Spatial characteristics of the turbulence were analyzed using the data from flight perpendicular and parallel to the wind. The probability density distributions of the vertical gusts show distinctly non-Gaussian characteristics. The distributions of the longitudinal and lateral gusts are generally Gaussian. The power spectra compare in the inertial subrange at some points better with the Dryden spectrum, while at other points the von Karman spectrum is a better approximation. In the low frequency range the data show peaks or dips in the power spectral density. The cross between vertical gusts in the direction of the mean wind were compared with a matched non-Gaussian model. The real component of the cross spectrum is in general close to the non-Gaussian model. The imaginary component, however, indicated a larger phase shift between these two gust components than was found in previous research.

Ganzer, V. M.↗

Pulsar average wave forms and hollow-cone beam models

Pulsar wave forms have been analyzed from observations conducted over a wide radio-frequency range to assess the wave-form morphologies and to measure wave-form widths. The results of the analysis compare favorably with the predictions of a model with a hollow-cone beam of fixed dimensions and with random orientation of both the observer and the cone axis with respect to the pulsar spin axis. A class of three-component wave forms is included in the model by adding a central pencil beam to the hollow-cone hypothesis. The consequences of a number of discrepancies between observations and quantitative predictions of the model are discussed.

Backer, D. C.↗

The Viking atmosphere structure experiment - Techniques, instruments, and expected accuracies

During high-speed entry and descent through the atmosphere of Mars, the two Viking spacecraft will make in situ measurements of the structure of the atmosphere. The profiles of temperature, pressure, and density with altitude will be defined from an altitude of about 100 km to touchdown, from measurements of the atmospherically induced deceleration and directly measured temperatures and pressures, the latter at altitudes below about 20 km. These data will be supplemented by onboard-radar altitudes and, below 8 km, by three-component Doppler radar velocities. Winds will be derived from the Doppler velocities and from gyro records of vehicle attitude changes. The planet radius at the landing site, needed to interpret the atmospheric data, will be defined to within a few tenths of a kilometer from the measured acceleration due to gravity after landing. It is expected that temperature will be determined to within about 1 K in the lower atmosphere, and to within a few degrees up to 100 km; pressures to within a few percent; and wind velocities to within about 2 meters/second below 8 km.

Seiff, A.↗

Study of a light curve of Beta Persei at 3428 A

Photometric light-curve data obtained during Copernicus satellite observations of Beta Persei in the Balmer continuum at 3428 A are analyzed and reduced. A small but significant fluctuation with a period of very nearly 0.069167 day in the photometric counts is tentatively attributed to a small perturbation in spacecraft attitude introduced each time the satellite passes from daylight into darkness. The light curve is intensity-rectified, phase-rectified, and solved on the assumption that the limb darkening follows the linear cosine law. The resulting distributions of luminosity among the three components of Beta Persei are plotted, and it is shown that the effective temperature of Algol B may be higher than 5000 K.

Chen, K.-Y.↗

The angular dependence of partially redistributed resonance radiation

Explicit expressions for the angular distribution and frequency dependence of radiation scattered by a spatially degenerate atom undergoing collisions are derived using a previously developed formalism of the quantum theory of line broadening for an atom in its rest frame. Results valid in the impact regime for resonant scattering are presented for the cases of linear incident and scattered polarization circular incident and linear scattered polarization, and unpolarized incident radiation with no monitoring of the scattered polarization. These results relate to scattering involving a j - j + or - 1 - j atomic transition, with lower-state interactions neglected; the expressions obtained take a relatively simple form involving atomic multipolar relaxation rates of the order of k = 0 and k = 2. The angular distributions for each case are combined with the frequency dependences to yield a three-component frequency redistribution function for an s-p-s transition, the components being a coherent term, a frequency-redistributed term with the same angular dependence as the coherent term, and an isotropic frequency-redistributed term.

Ballagh, R. J.↗

Potential structural material problems in a hydrogen energy system

Potential structural material problems that may be encountered in the three components of a hydrogen energy system - production, transmission/storage, and utilization - have been identified. Hydrogen embrittlement, corrosion, oxidation, and erosion may occur during the production of hydrogen. Hydrogen embrittlement is of major concern during both transmission and utilization of hydrogen. Specific materials research and development programs necessary to support a hydrogen energy system are described. An awareness of probable shortages of strategic materials has been maintained in these suggested programs.

Gray, H. R.↗

Mean horizontal wind profiles measured in the atmospheric boundary layer about a simulated block building

Instrumented wind towers are used to measure the three components of wind about a simulated block building. The mean horizontal wind profiles over the building are compared with wind profiles measured in the absence of the building and the wind speed deficit in the wake of the building is correlated. The turbulence intensity is of the order of 20% in the undisturbed flow whereas the free stream turbulence intensity of wind-tunnel studies is generally not more than 5%. The velocity profiles measured in the undisturbed flow zones support the representation of a neutrally stable atmospheric boundary layer with a logarithmic wind profile.

Frost, W.↗

A computer program for analyzing unresolved Mossbauer hyperfine spectra

The program for analyzing unresolved Mossbauer hyperfine spectra was written in FORTRAN 4 language for the Control Data CYBER 170 series digital computer system with network operating system 1.1. With the present dimensions, the program requires approximately 36,000 octal locations of core storage. A typical case involving two innermost coordination shells in which the amplitudes and the peak positions of all three components were estimated in 25 iterations requires 30 seconds on CYBER 173. The program was applied to determine the effects of various near neighbor impurity shells on hyperfine fields in dilute FeAl alloys.

Schiess, J. R.↗

Development of advanced methods for continuous Czochralski growth. Silicon sheet growth development for the large area silicon sheet task of the low cost silicon solar array project

The three components required to modify the furnace for batch and continuous recharging with granular silicon were designed. The feasibility of extended growth cycles up to 40 hours long was demonstrated by a recharge simulation experiment; a 6 inch diameter crystal was pulled from a 20 kg charge, remelted, and pulled again for a total of four growth cycles, 59-1/8 inch of body length, and approximately 65 kg of calculated mass.

Wolfson, R. G.↗

The far field diffraction pattern for corner reflectors with complex reflection coefficients

The far field diffraction pattern of a geometrically perfect corner reflector is examined analytically for normally incident monochromatic light. The states of polarization and the complex amplitudes of the emerging light are expressed through transformation matrices in terms of those of the original incident light for each sextant of the face in a single coordinate system. The analytic expression of the total diffraction pattern is obtained for a circular face. This expression consists of three component functions in addition to the basic Airy function. The coefficient of each function is expressed in terms of complex coefficients of reflectance of the reflecting surface. Some numerical results for different reflecting surfaces, including total internal reflection, are presented. The iso-intensity contours of the diffraction pattern evaluated from the analytical expressions for an uncoated solid corner reflector are also presented along with the photographs of the pattern.

Chang, R. F.↗

The ILLIAC IV memory system: Current status and future possibilities

The future needs of researchers who will use the Illiac were examined and the requirements they will place on the memory system were evaluated. Various alternatives to replacing critical memory components were considered with regard to cost, risk, system impact, software requirements, and implementation schedules. The current system, its performance and status, and the limitations it places on possible enhancements are discussed as well as the planned enhancements to the Illiac processor. After a brief technology survey, different implementations are presented for each system memory component. Three different memory systems are proposed to meet the identified needs of the Illiac user community. These three alternatives differ considerably with respect to storage capacity and accessing capabilities, but they all offer significant improvements over the current system. The proposed systems and their relative merits are analyzed.

Stevenson, D. K.↗

Infrared observations of Seyfert galaxies and quasars

The infrared energy distributions of the Seyfert galaxies apparently contain three components: a galactic stellar component, a thermal component from heated dust, plus a nonthermal component. The appearance of the infrared energy distribution depends on which component dominates. There is also a correlation observed between the infrared energy distribution and the Khachikian Weedman class. Preliminary data on bright quasars are given. The infrared energy distributions generally increase into the infrared with a power law slope of approximately 1. In detail they differ from power laws with a significant fraction emitting most of their energy near 3 micrometers. No differences in radio loud and radio quiet are obvious from the infrared energy distributions. The variability of the quasars in the infrared is generally correlated with the variability in the visible, although significant exceptions have been observed.

Neugebauer, G.↗

The fine-scale lunar magnetic field

Measurements conducted with the aid of the Apollo 15 subsatellite reported by Coleman et al. (1972) showed that the lunar field was detectable at an altitude of 100 km. Since that time there has been much activity in mapping the lunar magnetic field from orbit. A review is presented of the mapping procedure used in producing lunar field maps and an investigation is conducted of the altitude dependence of the lunar magnetic field which significantly affects these maps. Attention is also given to the history of lunar magnetic field maps, the fine-scale maps, low-altitude Apollo 16 maps, the altitude dependence, and the source of the magnetization of the lunar crust. It is found that the strong altitude dependence evident in the records is different for the three components.

Russell, C. T.↗

Field measurement of penetrator seismic coupling in sediments and volcanic rocks

Field experiments were conducted to determine experimentally how well a seismometer installed using a penetrator would be coupled to the ground. A dry lake bed and a lava bed were chosen as test sites to represent geological environments of two widely different material properties. At each site, two half-scale penetrators were fired into the ground, a three-component geophone assembly was mounted to the aft end of each penetrator, and dummy penetrators were fired at various distances to generate seismic signals. The recorded signals were digitized, and cross-spectral analyses were performed to compare the observed signals in terms of power spectral density ratio, coherence and phase difference. The analyses indicate that seismometers deployed by penetrators will be as well coupled to the ground as are seismometers installed by conventional methods for the frequency range of interest in earthquake seismology, although some minor differences were observed at frequencies near the upper limit of the frequency band.

Nakamura, Y.↗

Field Measurements of Penetrator Seismic Coupling in Sediments and Volcanic Rocks

Field experiments were conducted to determine how well a seismometer installed using a penetrator would be coupled to the ground. A dry-lake bed and a lava bed were chosen as test sites to represent geological environments of two widely different material properties. At each site, two half-scale penetrators were fired into the ground, a three-component geophone assembly was mounted to the aft end of each penetrator, and dummy penetrators were at various distances to generate seismic signals. These signals were detected by the penetrator-mounted geophone assembly and by a reference geophone assembly buried or anchored to surface rock and 1-m from the penetrator. The recorded signals were digitized, and cross-spectral analyses were performed to compare the observed signals in terms of power spectral density ratio, coherence, and phase difference. The analyses indicate that seismometers deployed by penetrators will be as well coupled to the ground as are seismometers installed by conventional methods for the frequency range of interest in earthquake seismology.

Nakamura, Y.↗

Low-speed wind-tunnel investigation of a large-scale VTOL lift-fan transport model

An investigation was conducted in the NASA-Ames 40 by 80 Foot Wind Tunnel to determine the aerodynamic characteristics of a large scale, VTOL, lift fan, jet transport model. The model had two lift fans at the forward portion of the fuselage, a lift fan at each wing tip, and two lift/cruise fans at the aft portion of the fuselage. All fans were driven by tip turbines using T-58 gas generators. Results were obtained for several lift fan, exit vane deflections and lift/cruise fan thrust deflections are zero sideslip. Three component longitudinal data are presented at several fan tip speed ratios. A limited amount of six component data were obtained with asymmetric vane settings. All of the data were obtained without a horizontal tail. Downwash angles at a typical tail location are also presented.

Aoyagi, K.↗

Wind-tunnel investigation of a large-scale VTOL aircraft model with wing root and wing thrust augmentors

Tests were conducted in the Ames 40 by 80 foot wind tunnel to determine the aerodynamic characteristics of a large-scale V/STOL aircraft model with thrust augmentors. The model had a double-delta wing of aspect ratio 1.65 with augmentors located in the wing root and the wing trailing edge. The supply air for the augmentor primary nozzles was provided by the YJ-97 turbojet engine. The airflow was apportioned approximately 74 percent to the wing root augmentor and 24 percent to wing augmentor. Results were obtained at several trailing-edge flap deflections with the nozzle jet-momentum coefficients ranging from 0 to 7.9. Three-component longitudinal data are presented with the agumentor operating with and without the horizontal tail. A limited amount of six component data are also presented.

Aoyagi, K.↗

Magnetosheath electrostatic turbulence

The spectrum of electrostatic wave turbulence in the terrestrial magnetosheath is investigated. Measurements of electric and magnetic field fluctuations in the range 20 Hz to 200 kHz were made by two 16-channel spectrum analyzers on board the IMP 6 satellite. It is found that the electrostatic wave spectra generally consist of three components, which may occur in any combination: a low frequency component which shows a decrease in spectral density with increasing frequency and which is associated with the bow shock wave, a high frequency component identified with electron plasma oscillations and an intermediate frequency component. The minimum wavelength of electrostatic waves is found to be about 0.1 km, with intensity of from 0.01 to 1.0 mV/m. Electric field polarization has been found to be parallel to the local magnetic field direction, implying the presence of longitudinal electrostatic wave modes, electron plasma oscillations and ion sound waves.

Rodriguez, P.↗