Search NASA⌕ Search

SEARCH · Search NASA

Results for “trends”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

The application of trend surface analysis to a portion of the Apollo 15 X-ray fluorescence data

X-ray fluorescence data for 8 and 16 second time integrals gathered by Apollo 15 in circum lunar orbit were analyzed to determine the capability for chemical mapping of relatively small lunar features in a portion of Tranquillitatis and Serenitatis basins. Spatial mapping using trend surface analysis demonstrated that a useable signal could be extracted from Al/Si intensity ratios calculated for 8 second time spans. Reliability of the Al/Si ratio was enhanced when 16 second data were compiled using a sliding average technique. Residual anomalies from the trend surface mapping were identified and correlated with relatively small lunar surface features.

Podwysocki, M. H.↗
NASA NTRS1975

High-lift aerodynamics: Trends, trades, and options

The trend toward the utilization of higher maximum lift coefficient with increased aircraft size and cruise velocities is discussed. The impact of this trend on the need for tradeoffs between cruise performance and takeoff, climb, and landing performance is examined. Theoretical methods for the analysis of the two-dimensional characteristics of flap systems are described and compared with experimental data. Four powered-lift concepts are described to outline some of the options currently being developed. Two jet-flap theories are described which provide analytical methods for estimation of the three-dimensional aerodynamic high-lift performance characteristics of powered lift systems.

Margason, R. J.↗
NASA NTRS1977

Classification of LANDSAT agricultural data based upon color trends

An automated classification procedure is described. The decision rules were developed for classifying an unknown observation by matching its color trend with that of expected trends for known crops. The results of this procedure were found to be encouraging when compared with the usual supervised classification procedures.

Tubbs, J. D.↗
NASA NTRS1978

Trends in computerized structural analysis and synthesis; Proceedings of the Symposium, Washington, D.C., October 30-November 1, 1978

The subjects considered are related to future directions of structural applications and potential of new computing systems, advances and trends in data management and engineering software development, advances in applied mathematics and symbolic computing, computer-aided instruction and interactive computer graphics, nonlinear analysis, dynamic analysis and transient response, structural synthesis, structural analysis and design systems, advanced structural applications, supercomputers, numerical analysis, and trends in software systems. Attention is given to the reliability and optimality of the finite element method, computerized symbolic manipulation in structural mechanics, a standard computer graphics subroutine package, and a drag method as a finite element mesh generation scheme.

Noor, A. K.↗
NASA NTRS1979

Comments on TEC trends

The paper comments on published and projected thermionic-energy-conversion (TEC) performance trends. This commentary includes graphs and an appendix relating TEC performance parameters, plots of predicted and actual TEC trends, a figure relating projected cost of electricity to overall efficiency for TEC topping, and a discussion of the implications of these relationships.

Morris, J. F.↗
NASA NTRS1980

Structural concept trends for commercial supersonic cruise aircraft design

Structural concept trends for future commercial supersonic transport aircraft are considered. Highlights, including the more important design conditions and requirements, of two studies are discussed. Knowledge of these design parameters, as determined through studies involving the application of flexible mathematical models, enabled inclusion of aeroelastic considerations in the structural-material concepts evaluation. The design trends and weight data of the previous contractual study of Mach 2.7 cruise aircraft were used as the basis for incorporating advanced materials and manufacturing approaches to the airframe for reduced weight and cost. Structural studies of design concepts employing advanced aluminum alloys, advanced composites, and advanced titanium alloy and manufacturing techniques are compared for a Mach 2.0 arrow-wing configuration concept. Appraisals of the impact of these new materials and manufacturing concepts to the airframe design are shown and compared. The research and development to validate the potential sources of weight and cost reduction identified as necessary to attain a viable advanced commercial supersonic transport are discussed.

Sakat, I. F.↗
NASA NTRS1981

Historical trend in the research and development of aircraft

Results are presented from a study of aircraft design trends undertaken to determine the relationship between research, development, test and evaluation and aircraft mission capability, requirements and objectives. It is shown that while in some cases a performance objective was the primary research driver, research was the driver in the formulation of objectives in others. Among the topics discussed are: (1) speed considerations such as compressibility, propulsion and test techniques; (2) airframe considerations such as swept, delta, trapezoidal and variable-sweep planforms and mission commonality; (3) research aircraft; (4) the recent impact of computer-aided design; (5) Soviet aircraft development approaches and (6) a comparison of Soviet and U.S. military aircraft design trends. Attention is given to experimental and prototype aircraft programs which, although cancelled, anticipated significant subsequent developments.

Spearman, M. L.↗
NASA NTRS1981

Ozone Trend Detectability

The detection of anthropogenic disturbances in the Earth's ozone layer was studied. Two topics were addressed: (1) the level at which a trend in total ozoning is detected by existing data sources; and (2) empirical evidence in the prediction of the depletion in total ozone. Error sources are identified. The predictability of climatological series, whether empirical models can be trusted, and how errors in the Dobson total ozone data impact trend detectability, are discussed.

Campbell, J. W.↗
NASA NTRS1981

Total ozone trend significance from space time variability of daily Dobson data

Estimates of standard errors of total ozone time and area means, as derived from ozone's natural temporal and spatial variability and autocorrelation in middle latitudes determined from daily Dobson data are presented. Assessing the significance of apparent total ozone trends is equivalent to assessing the standard error of the means. Standard errors of time averages depend on the temporal variability and correlation of the averaged parameter. Trend detectability is discussed, both for the present network and for satellite measurements.

Wilcox, R. W.↗
NASA NTRS1981

Trends in high temperature gas turbine materials

High performance - high technology materials are among the technologies that are required to allow the fruition of such improvements. Materials trends in hot section components are reviewed, and materials for future use are identified. For combustors, airfoils, and disks, a common trend of using multiple material construction to permit advances in technology is identified.

Grisaffe, S. J.↗
NASA NTRS1982

Recent trends in aviation turbine fuel properties

Plots and tables, compiled from Department of Energy (and predecessor agency) inspection reports from 1969 to 1980, present ranges, averages, extremes, and trends for most of the 22 properties of Jet A aviation turbine fuel. In recent years, average values of aromatics content, mercaptan sulfur content, distillation temperature of 10 percent recovered, smoke point, and freezing point show small but recognizable trends toward their specification limits. About 80 percent of the fuel samples had at least one property near specification, defined as within a standard band about the specification limit. By far the most common near-specification properties were aromatics content, smoke point, and freezing point.

Friedman, R.↗
NASA NTRS1983

Some historical trends in the research and development of aircraft

A survey of some trends in aircraft design was made in an effort to determine the relation between research, development, test, and evaluation (RDT and E) and aircraft mission capability, requirements, and objectives. Driving forces in the history of aircraft include the quest for speed which involved design concepts incorporating jet propulsion systems and low drag features. The study of high speed design concepts promoted new experimental and analytical research techniques. These research techniques, in turn, have lead to concepts offering new performance potential. Design trends were directed toward increased speed, efficiency, productivity, and safety. Generally speaking, the research and development effort has been evolutionary in nature and, with the exception of the transition to supersonic flight, little has occurred since the origin of flight that has drastically changed the basic design fundamentals of aircraft. However, this does not preclude the possibility of dramatic changes in the future since the products of research are frequently unpredictable. Advances should be expected and sought in improved aerodynamics (reduced drag, enhanced lift, flow field exploitation); propulsion (improved engine cycles, multimode engines, alternate fuels, alternate power sources); structures (new materials, manufacturing techniques); all with a view toward increased efficiency and utility.

Spearman, M. L.↗
NASA NTRS1983

Advances and trends in structural and solid mechanics; Proceedings of the Symposium, Washington, DC, October 4-7, 1982

The mechanics of materials and material characterization are considered, taking into account micromechanics, the behavior of steel structures at elevated temperatures, and an anisotropic plasticity model for inelastic multiaxial cyclic deformation. Other topics explored are related to advances and trends in finite element technology, classical analytical techniques and their computer implementation, interactive computing and computational strategies for nonlinear problems, advances and trends in numerical analysis, database management systems and CAD/CAM, space structures and vehicle crashworthiness, beams, plates and fibrous composite structures, design-oriented analysis, artificial intelligence and optimization, contact problems, random waves, and lifetime prediction. Earthquake-resistant structures and other advanced structural applications are also discussed, giving attention to cumulative damage in steel structures subjected to earthquake ground motions, and a mixed domain analysis of nuclear containment structures using impulse functions.

Noor, A. K.↗
NASA NTRS1983

Spacecraft-borne long life cryogenic refrigeration: Status and trends

The status of cryogenic refrigerator development intended for, or possibly applicable to, long life spacecraft-borne application is reviewed. Based on these efforts, the general development trends are identified. Using currently projected technology needs, the various trends are compared and evaluated. The linear drive, non-contacting bearing Stirling cycle refrigerator concept appears to be the best current approach that will meet the technology projection requirements for spacecraft-borne cryogenic refrigerators. However, a multiply redundant set of lightweight, moderate life, moderate reliability Stirling cycle cryogenic refrigerators using high-speed linear drive and sliding contact bearings may possibly suffice.

Johnson, A. L.↗
NASA NTRS1985

Some fighter aircraft trends

Some basic trends in fighters are traced from the post World II era. Beginning with the first operational jet fighter, the P-80, the characteristics of subsequent fighter aircraft are examined for performance, mission capability, effectiveness, and cost. Characteristics presented include: power loading, wing loading, maximum speed, rate of climb, turn rate, weight and weight distribution, cost and cost distribution. The characteristics of some USSR aircraft are included for comparison. The trends indicate some of the rationale for certain fighter designs and some likely characteristics to be sought in future fighter aircraft designs.

Spearman, L.↗
NASA NTRS1985

Measurement Requirements for the Detection of Ozone Trends

The number of measurements and period of collection in order to detect a trend in the vertical distribution of ozone was studied. Specific issues considered include the impact of: (1) short term ozone variability over the measurement site, and (2) the precision of the measuring instrument on the ability to detect trends to a given confidence limit.

Frederick, J. E.↗
NASA NTRS1985

Trends in the Southern Hemisphere

The station data of monthly mean sea level pressure, surface air temperature as well as monthly mean upper air rawinsonde observations were used to study the trends in the southern winter (June, July and August) and summer (December, January and February). This study covers the period 1951 to 1981. Most of the surface data have continuous 31 year records, however, for some high latitude stations, both surface and upper air records started in 1957 or even later. The normalized anomaly for a given variable Z is defined as the departure from the 1951 to 1981 grand mean divided by the standard deviation during the same period. To eliminate the large fluctuations in the data, the 1-3-1 smoothing was applied to the time series of normalized anomalies. The trends of monthly mean temperatures and height from the surface to 200 mb level is documented.

Mo, K. C.↗