Search NASA⌕ Search

SEARCH · Search NASA

Results for “utility managed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Vibroacoustic Payload Environment Prediction System (VAPEPS): VAPEPS management center remote access guide

A Vibroacoustic Payload Environment Prediction System (VAPEPS) Management Center was established at the JPL. The center utilizes the VAPEPS software package to manage a data base of Space Shuttle and expendable launch vehicle payload flight and ground test data. Remote terminal access over telephone lines to the computer system, where the program resides, was established to provide the payload community a convenient means of querying the global VAPEPS data base. This guide describes the functions of the VAPEPS Management Center and contains instructions for utilizing the resources of the center.

Fernandez, J. P.↗

Impedance-Based State-of-Health Estimation for Lithium-Ion Battery Management Systems

This paper discusses an impedance-based state-of-health (SOH) estimation for lithium-ion battery management systems. Features obtained from the Nyquist plot of the electrochemical impedance spectroscopy (EIS) are utilized to estimate the SOH. Two commercial lithium-ion batteries were aged (cycled) in the laboratory to collect aging and impedance data. An algorithm for SOH estimation is presented and evaluated. The performance evaluation results show that the SOH features extracted from the Nyquist plot can be utilized for SOH estimation. Estimated SOH values can be then utilized in various battery management systems (BMS) functions such as for calibrating the available capacity, adjusting charging/discharging strategies, and protection.

Al-Smadi, Mohammad↗

Considerations and techniques for incorporating remotely sensed imagery into the land resource management process.

Development of a scheme for utilizing remote sensing technology in an operational program for regional land use planning and land resource management program applications. The scheme utilizes remote sensing imagery as one of several potential inputs to derive desired and necessary data, and considers several alternative approaches to the expansion and/or reduction and analysis of data, using automated data handling techniques. Within this scheme is a five-stage program development which includes: (1) preliminary coordination, (2) interpretation and encoding, (3) creation of data base files, (4) data analysis and generation of desired products, and (5) applications.

Brooner, W. G.↗

Different shades of gray: crafting a regulatory response to private equity buyouts in electricity

Private equity has made a dramatic entry into the once-staid world of electric utilities. These investors, with their superior management expertise and greater access to capital, have the potential to improve utility operations and increase investment in badly needed generation and transmission facilities. Their acquisitions do not come without their share of risks, however. (author)

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Management of Large-Scale Wireless Sensor Networks Utilizing Multi-Parent Recursive Area Hierarchies

Autonomously configuring and self-healing a largescale wireless sensor network requires a light-weight maintenance protocol that is scalable. Further, in a battery powered wireless sensor network duty-cycling a node’s radio can reduce the power consumption of a device and extend the lifetime of a network. With duty-cycled nodes the power consumption of a node’s radio depends on the amount of communication is must perform and by reducing the communication the power consumption can also be reduced. Multi-parent hierarchies can be used to reduce the communication cost when constructing a recursive area clustering hierarchy when compared to singleparent solutions that utilize inefficient communication methods such as flooding and information propagation via single-hop broadcasts. The multi-parent hierarchies remain scalable and provides a level of redundancy for the hierarchy.

Environmental Molecular Sciences Laboratory↗

Utilization of remotely-sensed data in the management of inland wetlands

ERTS data and aerial photography are shown to represent valuable tools for the inventory and management of inland wetlands. The two discussed examples of the application of remotely-sensed data to specific wetland management needs and requirements are the Great Dismal Swamp of Virginia-North Carolina and the Water Conservation District of southern Florida.

Carter, V.↗

The ERTS-1 investigation (ER-600): A compendium of analysis results of the utility of ERTS-1 data for land resources management

The results of the ERTS-1 investigations conducted by the Earth Observations Division at the NASA Lyndon B. Johnson Space Center are summarized in this report, which is an overview of documents detailing individual investigations. Conventional image interpretation and computer-aided classification procedures were the two basic techniques used in analyzing the data for detecting, identifying, locating, and measuring surface features related to earth resources. Data from the ERTS-1 multispectral scanner system were useful for all applications studied, which included agriculture, coastal and estuarine analysis, forestry, range, land use and urban land use, and signature extension. Percentage classification accuracies are cited for the conventional and computer-aided techniques.

Erb, R. B.↗

Utilizing Skylab data in on-going resources management programs in the state of Ohio

The author has identified the following significant results. The use of Skylab imagery for total area woodland surveys was found to be more accurate and cheaper than conventional surveys using aerial photo-plot techniques. Machine-aided (primarily density slicing) analyses of Skylab 190A and 190B color and infrared color photography demonstrated the feasibility of using such data for differentiating major timber classes including pines, hardwoods, mixed, cut, and brushland providing such analyses are made at scales of 1:24,000 and larger. Manual and machine-assisted image analysis indicated that spectral and spatial capabilities of Skylab EREP photography are adequate to distinguish most parameters of current, coal surface mining concern associated with: (1) active mining, (2) orphan lands, (3) reclaimed lands, and (4) active reclamation. Excellent results were achieved when comparing Skylab and aerial photographic interpretations of detailed surface mining features. Skylab photographs when combined with other data bases (e.g., census, agricultural land productivity, and transportation networks), provide a comprehensive, meaningful, and integrated view of major elements involved in the urbanization/encroachment process.

Baldridge, P. E.↗

Developing A Space-Based Solution to Increase Accessibility, Quality, and Utility of Animal Tracking Data for Research and Management: the Internet of Animals Project

Animal tracking technology has advanced dramatically over the last several decades, but researchers and wildlife managers still encounter technological roadblocks in the study of animal movement and acquisition of animal movement data. For example, we still lack technology that provides automated high-resolution data for small animals that travel long distances, which limits our ability to answer both theoretical and applied questions about these species. In response to these needs, NASA has initiated a five-year study of potential space-based solutions that could provide global low-latency tracking of small migratory animals. This study, named Internet of Animals (IOA), aims to 1) systematically assess the needs of animal movement researchers and ecological managers, 2) design a next-generation space-based animal tracking system, i.e. an ‘Internet of Animals’ or IoA, to meet those needs, and 3) developing science and technology needed to link animal tracking data to the many other dimensions of biodiversity that can now be mapped from space using remote sensing. Here, we present results from the first IOA workshop, which highlighted the diverse needs of researchers and managers working across systems and realms. We also provide opportunities for the community to engage in the future.

remote sensing↗

Benefit Assessment of the Integrated Demand Management Concept for Multiple New York Metroplex Airports

Benefits of the Integrated Demand Management (IDM) concept were assessed utilizing a newly developed automated simulation capability called ‘Traffic Management Initiative Automated Simulation (TMIAutoSim).’ The IDM concept focuses on improving traffic flow management (TFM) by coordinating the FAA’s strategic Traffic Flow Management System (TFMS) with its more tactical Time-Based Flow Management (TBFM) system. The IDM concept leverages a new TFMS capability called Collaborative Trajectory Options Program (CTOP) to strategically pre-condition traffic demand flowing into a TBFM-managed arrival environment, where TBFM is responsible for tactically managing traffic by generating precise arrival schedules. The IDM concept was developed over a multi-year effort, focusing on solving New York metroplex airport arrival problems. TMIAutoSim closely mimics NASA’s high-fidelity simulation capabilities while enabling more data to be collected at higher speed. Using this new capability, the IDM concept was evaluated using realistic traffic across various weather scenarios. Six representative weather days were selected after clustering three months of historical data. For those selected six days, Newark Liberty International Airport (EWR) and LaGuardia Airport (LGA) arrival traffic scenarios were developed. For each selected day, the historical data were analyzed to accurately simulate actual operations and the weather impact of the day. The current day operations and the IDM concept operations were simulated for the same weather scenarios and the results were compared. The selected six days were categorized into two groups: ‘clear weather’ for days without Ground Delay Programs (GDP) and ‘convective weather’ for days with GDP and significant weather around New York metroplex airports. For the clear weather scenarios, IDM operations reduced last minute, unanticipated departure delays for short-haul flights within TBFM control boundaries with minimal to no impact on throughput and total delay. For the convective weather scenarios, IDM significantly reduced delays and increased throughput to the destination airports.

Traffic Management Initiative Automated Simulation↗

INL Site Executable Plan for Energy and Transportation Fuels Management

It is the policy of the Department of Energy (DOE) that sustainable energy and transportation fuels management will be integrated into DOE operations to meet obligations under Executive Order (EO) 13423 "Strengthening Federal Environmental, Energy, and Transportation Management," the Instructions for Implementation of EO 13423, as well as Guidance Documents issued in accordance thereto and any modifcations or amendments that may be issued from time to time. In furtherance of this obligation, DOE established strategic performance-based energy and transportation fuels goals and strategies through the Transformational Energy Action Management (TEAM) Initiative, which were incorporated into DOE Order 430.2B "Departmental Energy, Renewable energy, and Transportation Management" and were also identified in DOE Order 450.1A, "Environmental Protection Program." These goals and accompanying strategies are to be implemented by DOE sites through the integration of energy and transportation fuels management into site Environmental Management Systems (EMS).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Advanced Inverter Technology for High Penetration Levels of PV Generation in Distribution Systems

This subcontract report was completed under the auspices of the NREL/SCE High-Penetration Photovoltaic (PV) Integration Project, which is co-funded by the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) and the California Solar Initiative (CSI) Research, Development, Demonstration, and Deployment (RD&D) program funded by the California Public Utility Commission (CPUC) and managed by Itron. This project is focused on modeling, quantifying, and mitigating the impacts of large utility-scale PV systems (generally 1-5 MW in size) that are interconnected to the distribution system. This report discusses the concerns utilities have when interconnecting large PV systems that interconnect using PV inverters (a specific application of frequency converters). Additionally, a number of capabilities of PV inverters are described that could be implemented to mitigate the distribution system-level impacts of high-penetration PV integration. Finally, the main issues that need to be addressed to ease the interconnection of large PV systems to the distribution system are presented.

14 SOLAR ENERGY↗

Identification and Development of Coordination Procedures Between Upper Class E Traffic Management (ETM) and Surrounding Air Traffic Operations

A recent interest in novel, non-traditional vehicles / missions that plan to operate in Upper Class E (UCE) airspace at or above 60,000 ft has led to efforts by NASA, FAA and the stakeholder communities to research and develop a new concept called Upper Class E Traffic Management (ETM). ETM concept proposes to handle the influx of diverse traffic mix around FL600 and above, utilizing a new traffic management infrastructure, supported by federated service suppliers that are developed by the community stakeholders, for coordinating, monitoring, and executing vehicle operational intent in a designated airspace called ETM Cooperative Area (CA). ETM vehicles are generally expected to reach and operate in ETM CA by first transiting through Class A airspace and potentially through UCE airspace that sits outside of ETM CA. In this paper, a set of use cases have been identified and step-by-step procedures have been developed to handle nominal transitions of ETM vehicles between these operational areas, as well as additional use cases and procedures for authorization and termination of ETM CAs in Class A and/or UCE airspace. The overall research effort in this paper has revealed potential challenges and open questions related to these use cases, especially for the interactions between ETM CA and UCE in both vehicle transition and ETM CA authorization scenarios. The use cases and procedures developed in this paper will inform future ETM integration efforts, as well as research and development into decision support tools needed for the integration.

Upper Class E Traffic Management (ETM)↗

Human performance benefits gained by dynamic instructions compared to smart PDFs

Human performance benefits gained by dynamic instructions compared to smart PDFs In recent years multiple nuclear utilities have deployed an electronic work management solution to replace the traditional paper-based processes. There are many benefits of electronic work management solutions compared to paper processes, such as a more streamlined review and approval process of work packages and a better way to track and resolve any potential bottlenecks causing delays in the review process. These benefits have been recognized where electronic work management solutions have been successfully deployed. However the utilities also hoped the new solution would help the field worker conduct his/her job more efficiently, correctly, and safely. Unfortunately, the industry is now realizing that the deployed solutions did not fully help them reach that goal. The electronic work management solutions present the work instructions as an electronic copy (i.e., a portable document format (PDF)) of the paper instruction. The PDF versions used in these electronic work management solutions have some ability for data input, notes, and mark-ups, but are unable to provide many additional benefits compared to using paper. In fact, conducting work using a PDF on a tablet can be more cumbersome than with a paper instruction. For example, flipping back and forth in a paper instruction can be time consuming, but it is not at all as frustrating as scrolling back and forth on a tablet or continuously having to navigate between tabs. The researchers at Idaho National Laboratory (INL) approached the next step beyond smart PDFs from a human factors perspective. In close collaboration with multiple utilities they investigated how to present instruction content and how to design the interaction with the instruction to improve the workers performance and efficiency. Their solution is a dynamic presentation of the instruction that guides the worker through the correct path as well as ensuring the worker is on the correct component. The solution also automatically validates input and provides guidance if unexpected conditions are identified. A well-designed solution has the opportunity to vastly reduce the risk of human errors in the field, such as preventing actions on incorrect component or unintentionally skipping steps. The human factors researchers at INL leveraged their expertise, existing human performance tools, and a great amount of involvement from field workers in multiple utilities to develop and evaluate design concepts that will provide the human performance and efficiency benefits that the electronic work management solutions fall short to deliver. This paper will describe in detail how these new design concepts improve human performance.

47 OTHER INSTRUMENTATION↗

Talent Acquisition in Scientific and Engineering Disciplines: A Case Study of National Laboratory (TASED) [Thesis]

Identifying the hindrances to performing effective talent acquisition within the science, technology, engineering, and mathematics field is an important topic for technical hiring managers. Top candidates have multiple options during highly competitive market conditions requiring managers to look for unique solutions which diverge from competition. Prior to this study there has been very little research considering national laboratory research and development challenges from a technical hiring manager’s talent acquisition perspective. Utilizing a unique combination of national laboratory multi-organization survey, pilot study, Human Resource (HR) tracking data and trust based business strategy to enhance partnering this research finds hiring managers can leverage out of the box techniques to improve internal processes while developing industry support to target highly qualified individuals. This methodology could be utilized by technical hiring managers across federal national laboratory enterprise to effectively capture next generation staff and leadership talent who align with their organization professionally as well as social culture.

99 GENERAL AND MISCELLANEOUS↗