Search NASA⌕ Search

SEARCH · Search NASA

Results for “validation method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Composite Boson Description of a Low-Density Gas of Excitons

Ground-state properties of a fermionic Coulomb gas are calculated using the fixed-node diffusion Monte Carlo method. The validity of the composite boson description is tested for different densities. We extract the exciton–exciton s-wave scattering length by solving the four-body problem in a harmonic trap and mapping the energy to that of two trapped bosons. The equation of state is consistent with the Bogoliubov theory for composite bosons interacting with the obtained s-wave scattering length. The perturbative expansion at low density has contributions physically coming from (a) exciton binding energy, (b) mean-field Gross–Pitaevskii interaction between excitons, and (c) quantum depletion of the excitonic condensate (Lee–Huang–Yang terms for composite bosons). In addition, for low densities we find a good agreement with the Bogoliubov bosonic theory for the condensate fraction of excitons. The equation of state in the opposite limit of large density is found to be well described by the perturbative theory including (a) mixture of two ideal Fermi gases and (b) exchange energy. We find that for low densities both energetic and coherent properties are correctly described by the picture of composite bosons (excitons).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Generation of Low Fidelity Experimental Covariance Matrices for ICSBEP Cases

In validation, statistical methods routinely incorporate information from integral experiments to improve estimations of code biases and uncertainties. One source of high quality integral experiments is the ICSBEP Handbook. While uncertainties for criticality benchmarks are well characterized in the Handbook, information pertaining to the shared uncertainty/covariance between the cases is sparse, yet required for the aforementioned methods; correlations can result from using the same fuel for example. To remedy the lack of available covariance data in the Handbook, recent efforts have been undertaken, notably, within the framework of the NEA Expert Group on Uncertainty Analysis in Criticality Safety Assessment (UACSA) under the Working Party on Nuclear Criticality Safety (WPNCS) . The UACSA activities have focused primarily on comparing methods used to generate high quality covariance matrices for a small number of evaluations. Despite these efforts, within the Database for ICSBEP DICE only about 2% of the nearly 5000 experiments in the ICSBEP Handbook have correlation coefficients, so the amount of work required to generate the missing data appears daunting. And so, to fill in the gaps where no correlations are available, it is proposed to generate low fidelity correlations by isolating the largest components of uncertainty and determining the fraction shared between cases within an evaluation. Uncertainties can be shared when they are not independently measured, or the source of uncertainty is unchanged between cases. The degree to which an uncertainty is shared is linked to the experimental procedure; an approximation is made that in the absence of additional information, similar experimental procedures will lead to a similar fraction of shared uncertainty. Between experimental procedures there is some commonality. One method, proposed here, to help elucidate similar procedures is to encode each procedure into a decision tree grouped by uncertainty type. End nodes of the tree require judgment to assign the fraction of shared uncertainty between cases associated with the node. This can also be thought of as a set of rules, such that if experimental procedures and conditions occurred, then assign the shared uncertainty as some number between 0.0 and 1.0. One advantage of such a procedure is the formation of a transparent logical link between the judgment applied and the amount of shared uncertainty. This makes the results both more reproducible and easy to update. Generating correlation coefficients is reduced to developing decision trees that categorize how the experiments were done, and apply judgment of the degree of shared uncertainty for the end node of the tree. Trees need to be constructed after reading section 1 and 2 of the evaluation and some evaluations certainly do not contain enough information to create informative decision trees nor to assign an amount of shared uncertainty. These evaluations will not be considered here. (authors)

42 ENGINEERING↗
DOE OSTI2019

The 2019 Edition of the ICSBEP Handbook

Over the past several decades, innumerable experiments have been performed worldwide to support criticality safety. These experiments represent significant investment in infrastructure, expertise, and cost, and are valuable resources of data for present and future research. These valuable assets provide the basis for recording, development, and validation of methods and nuclear data [1]. If the experimental data are lost, the high cost to repeat many of these measurements would likely be prohibitive. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) was established to: 1. Identify a comprehensive set of critical benchmark data and, to the extent possible, verify the data; 2. Evaluate the data and quantify overall uncertainties through various types of sensitivity analyses; 3. Compile the data into a standardized format; 4. Perform calculations of each experiment with standard criticality safety codes; and 5. Formally document the work into a single source of verified benchmark critical data. Annually, contributors from around the world continue to collaborate in the evaluation and review of select benchmark experiments for inclusion in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook) [2]. Further information regarding the ICSBEP, including highlighted criticality safety benchmark evaluations, can be found in the September and October 2003 editions of Nuclear Science and Engineering [3]. New and recently revised evaluations have been prepared for inclusion in the 2019 edition of the ICSBEP Handbook.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2016

Investigation of Iso-octane Ignition and Validation of a Multizone Modeling Method in an Ignition Quality Tester

An ignition quality tester was used to characterize the autoignition delay times of iso-octane. The experimental data were characterized between temperatures of 653 and 996 K, pressures of 1.0 and 1.5 MPa, and global equivalence ratios of 0.7 and 1.05. A clear negative temperature coefficient behavior was seen at both pressures in the experimental data. These data were used to characterize the effectiveness of three modeling methods: a single-zone homogeneous batch reactor, a multizone engine model, and a three-dimensional computational fluid dynamics (CFD) model. A detailed 874 species iso-octane ignition mechanism (Mehl, M.; Curran, H. J.; Pitz, W. J.; Westbrook, C. K.Chemical kinetic modeling of component mixtures relevant to gasoline. Proceedings of the European Combustion Meeting; Vienna, Austria, April 14-17, 2009) was reduced to 89 species for use in these models, and the predictions of the reduced mechanism were consistent with ignition delay times predicted by the detailed chemical mechanism across a broad range of temperatures, pressures, and equivalence ratios. The CFD model was also run without chemistry to characterize the extent of mixing of fuel and air in the chamber. The calculations predicted that the main part of the combustion chamber was fairly well-mixed at longer times (> ~30 ms), suggesting that the simpler models might be applicable in this quasi-homogeneous region. The multizone predictions, where the combustion chamber was divided into 20 zones of temperature and equivalence ratio, were quite close to the coupled CFD-kinetics results, but the calculation time was ~11 times faster than the coupled CFD-kinetics model. Although the coupled CFD-kinetics model captured the observed negative temperature coefficient behavior and pressure dependence, discrepancies remain between the predictions and the observed ignition time delays, suggesting improvements are still needed in the kinetic mechanism and/or the CFD model. This approach suggests a combined modeling approach, wherein the CFD calculations (without chemistry) can be used to examine the sensitivity of various model inputs to in-cylinder temperature and equivalence ratios. In conclusion, these values can be used as inputs to the multizone model to examine the impact on ignition delay. Additionally, the speed of the multizone model also makes it feasible to quickly test more detailed kinetic mechanisms for comparison to experimental data and sensitivity analysis.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Formation and Detriments of Residual Alkaline Compounds on High-Nickel Layered Oxide Cathodes

High-nickel layered oxides LiNi x M 1-x O 2 (x ≥ 0.9) have emerged as promising cathode materials for automotive batteries due to their high energy density and lower cost. However, the formation and accumulation of surface alkaline compounds during storage hinder their mass production and commercialization. Here, in this study, a validated chemical method is employed to deconvolute and quantify the evolution of each residual lithium compound in four representative cathodes during ambient-air storage, viz., LiNiO 2 (LNO), LiNi 0.95 Co 0.05 O 2 (NC), LiNi 0.95 Mn 0.05 O 2 (NM), and LiNi 0.95 Al 0.05 O 2 (NA). Furthermore, the activation energy of the reaction between water and the cathode is determined by measuring the leached LiOH concentration at various temperatures. While residual lithium and time-of-flight secondary-ion mass spectrometry measurements collectively reveal that the air stability overall follows the trend of NM > NA ≈ NC > LNO, the aged NM exhibits the highest charge-transfer resistance and the worst electrochemical performance among the cathodes. In situ, X-ray diffraction and scanning transmission electron microscopy unveil that the aged NM is plagued by a large area of resistive spinel-like M 3–x Li x O 4 phases, leading to aggravated particle reaction heterogeneity. Finally, a one-step recalcination method is demonstrated effective in fully restoring the degraded cathodes. This work provides insights into overcoming air sensitivity issues of high-Ni cathodes.

(S)TEM↗
DOE OSTI2021

Design and Realization of Ohmic and Schottky Interfaces for Oxide Electronics

Understanding band alignment and charge transfer at complex oxide interfaces is critical to tailoring and utilizing their diverse functionality. Toward this goal, both Ohmic- and Schottky-like charge transfers at oxide/oxide semiconductor/metal interfaces are designed and experimentally validated. A method for predicting band alignment and charge transfer in ABO 3 perovskites is utilized, where previously established rules for simple semiconductors fail. The prototypical systems chosen are the rare class of oxide metals, SrBO 3 with B = V–Ta, when interfaced with the multifaceted semiconducting oxide, SrTiO 3 . For B = Nb and Ta, it is confirmed that a large accumulation of charge occurs in SrTiO 3 due to the higher energy Nb and Ta states relative to Ti. Furthermore, this gives rise to a high mobility metallic interface, which is an ideal epitaxial oxide/oxide Ohmic contact. On the contrary, for B = V, there is no charge transfer into the SrTiO 3 interface, which serves as a highly conductive epitaxial gate metal. Going beyond these specific cases, this work opens the door to integrating the vast phenomena of ABO 3 perovskites into a wide range of practical devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Charge Carrier Lifetime Determination in Graded Absorber Solar Cells Using Time‐Resolved Photoluminescence Simulations and Measurements

Thin‐film photovoltaic device efficiencies are limited by carrier recombination, thus understanding recombination mechanisms is critical for performance improvements. Bulk minority carrier lifetime ( τ bulk ) is a critical parameter for solar cells but is difficult to determine in P–N junction devices, especially for high doping. As doping ≥10 16 cm −3 is required for efficient drift‐charge‐carrier‐collection devices, a method for τ bulk determination in doped P–N junction devices is necessary. This work utilizes time‐resolved photoluminescence (TRPL) simulations to quantify bulk and interface recombination properties in highly doped, graded absorber CdSeTe structures. The two methods developed here for τ bulk determination include utilization of an instantaneous lifetime representation to guide TRPL fitting and direct comparison between measured and simulated decays. Simulations verified that both methods are valid for state‐of‐the‐art device architectures which include graded bandgap absorbers, graded doping, and graded lifetimes. Shifts in the dominant recombination mechanism are identified for sufficiently long τ bulk , where front and back interface quality plays a more prominent role. Evaluation of surface recombination velocities and conduction band offset illustrate electro‐optical advantages of a positive conduction band offset and highlight the necessity of improved interfaces as bulk quality in photovoltaic devices improves.

14 SOLAR ENERGY↗
DOE OSTI2019

Estimating Rotor Suspension Parameters from Runout Data

Determining the dynamic characteristics of rotor suspensions is needed to make accurate predictions of rotor behavior. If direct measurements are unavailable, a method for estimating them is needed. This paper describes a method for estimating suspension characteristics from rotor runout data measured by proximity probes in a rotor test stand. Comparison of measured critical speeds with values predicted using the estimated rotor suspension parameters for a test rotor show good agreement, indicating that the method is valid.

Damiano, Brian↗
DOE OSTI2023

Search for CP violation in the phase space of D 0 → π⁻π⁺π 0 decays with the energy test

A search for CP violation in D 0 → π - π + π 0 decays is reported, using pp collision data collected by the LHCb experiment from 2015 to 2018 corresponding to an integrated luminosity of 6 fb - 1 . An unbinned model-independent approach provides sensitivity to local CP violation within the two-dimensional phase space of the decay. The method is validated using the Cabibbo-favoured channel D 0 → K - π + π 0 and background regions of the signal mode. The results are consistent with CP symmetry in this decay.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Inclusive search for highly boosted Higgs bosons decaying to bottom quark-antiquark pairs in proton-proton collisions at $\sqrt{s} =$ 13 TeV

A search for standard model Higgs bosons (H) produced with transverse momentum (p$_{T}$) greater than 450 GeV and decaying to bottom quark-antiquark pairs ($ \mathrm{b}\overline{\mathrm{b}} $) is performed using proton-proton collision data collected by the CMS experiment at the LHC at $ \sqrt{s} $ = 13 TeV. The data sample corresponds to an integrated luminosity of 137 fb$^{−1}$. The search is inclusive in the Higgs boson production mode. Highly Lorentz-boosted Higgs bosons decaying to $ \mathrm{b}\overline{\mathrm{b}} $ are reconstructed as single large-radius jets, and are identified using jet substructure and a dedicated b tagging technique based on a deep neural network. The method is validated with Z →$ \mathrm{b}\overline{\mathrm{b}} $ decays. For a Higgs boson mass of 125 GeV, an excess of events above the background assuming no Higgs boson production is observed with a local significance of 2.5 standard deviations (σ), while the expectation is 0.7. The corresponding signal strength and local significance with respect to the standard model expectation are μ$_{H}$ = 3.7 ± 1.2(stat)$ {}_{-0.7}^{+0.8} $(syst)$ {}_{-0.5}^{+0.8} $(theo) and 1.9 σ. Additionally, an unfolded differential cross section as a function of Higgs boson p$_{T}$ for the gluon fusion production mode is presented, assuming the other production modes occur at the expected rates.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Solid Phase Extraction of Cadmium and Lead from Water by Amberlyst 15 and Determination by Flame Atomic Absorption Spectrometry

Preconcentration of Cd(II) and Pb(II) was carried out by using column solid phase extraction method. Amberlyst 15 was used as solid phase for these analytes. The optimum extraction conditions such as pH (4), type and volume of eluent (5 mL of 2 mol L{sup −1} HNO{sub 3}) sample flow rate (1 mL min{sup −1}) and sample volume (100 mL for Cd(II) and 750 mL for Pb(II)) were determined. The recoveries were found for Cd(II) and Pb(II) as 104% ± 1% and 102 % ± 2%, respectively. The limit of detections were found as 0.23 µg L{sup −1} for Cd(II) and 0.13 µg L{sup −1} for Pb(II). The effects of foreign ions were also studied. The method was validated by analyzing standard reference material and spiked water samples. Percent relative error and relative standard deviation were below 3% and 4%, respectively.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

A posteriori error estimation and adaptivity in hp virtual elements

An explicit and computable error estimator for the hp version of the virtual element method (VEM), together with lower and upper bounds with respect to the exact energy error, is presented. Such error estimator is employed to provide, following the approach of Melenk and Wohlmuth (Adv Comput Math 15(1–4):311–331, 2001), hp adaptive mesh refinements for very general polygonal meshes. In addition, a novel VEM hp Clément quasi-interpolant, instrumental for the a posteriori error analysis, is introduced. The performances of the adaptive method are validated by a number of numerical experiments.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

A Non-perturbative Approach to Computing Seismic Normal Modes in Rotating Planets

In this work, a continuous Galerkin method based approach is presented to compute the seismic normal modes of rotating planets. Special care is taken to separate out the essential spectrum in the presence of a fluid outer core using a polynomial filtering eigensolver. The relevant elastic-gravitational system of equations, including the Coriolis force, is subjected to a mixed finite-element method, while self-gravitation is accounted for with the fast multipole method. Our discretization utilizes fully unstructured tetrahedral meshes for both solid and fluid regions. The relevant eigenvalue problem is solved by a combination of several highly parallel and computationally efficient methods. We validate our three-dimensional results in the non-rotating case using analytical results for constant elastic balls, as well as numerical results for an isotropic Earth model from standard “radial” algorithms. We also validate the computations in the rotating case, but only in the slowly-rotating regime where perturbation theory applies, because no other independent algorithms are available in the general case. The algorithm and code are used to compute the point spectra of eigenfrequencies in several Earth and Mars models studying the effects of heterogeneity on a large range of scales.

58 GEOSCIENCES↗
DOE OSTI2017

New Method to Estimate the Permittivity of Dielectric Materials Using MSPS

A new method to estimate the relative dielectric permittivity of material’s sheet is presented. In this method, a conventional microstrip patch sensor (MSPS) is utilized to resonate at 2.45 GHz. An unknown material, considered as a superstrate layer of 5 mm thickness, is located in the near-field region of the MSPS, at a distance of 5 mm above the sensor. From the changes in the MSPS’s parameters, the dielectric property of the unknown material can be deduced. Based on the conformal map theory, theoretical analyses were performed, and hence, simulation analyses were done using the CST-MW software package. This proposed method was validated through measurements. From the theoretical, simulation, and measurement results, it was shown that depending on the frequency response, the relative permittivity can be estimated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Measurement of partial vapor pressures of salt mixtures via combined horizontal transpiration and thermogravimetric analysis

A method combining thermogravimetric analysis (TGA) and horizontal transpiration with elemental analysis via inductively coupled plasma mass spectrometry or ion chromatography enabled calculation of partial pressures of individual salts in molten mixtures. TGA quantified total mass loss, while transpiration identified vapor-phase composition. Furthermore, two chloride (NaCl-MgCl 2 , NaCl-MgCl 2 + UCl 3 ) salts and one mixed halide (LiCl-LiF + Li 2 O) salt were analyzed at 750 °C and 550 °C, respectively. NaCl and MgCl 2 vapor pressures were 2.19–2.61 × 10 -4 atm and 2.47–2.48 × 10 -5 atm (dependent upon the identity of the invesitgated mixture); UCl 3 was 1.42 × 10 -7 atm. LiCl and LiF vapor pressures at 550 °C were 1.53 × 10 -6 and 6.32 × 10 -6 atm, respectively. Additionally, the TGA method was validated against values from the literature for unary LiCl and LiF.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Energy efficient photonic millimeter-wave generation using cascaded polarization modulators

A filter-less millimeter-wave generation scheme consisting of four polarization modulators in series, each followed by a polarizer is proposed to achieve optoelectronic frequency octupling. The cascade of polarization modulator and polarizer provides an intensity modulator whose biasing condition can be set by the polarizer angle and polarization state of the input light to each polarization modulator. A theoretical analysis of the architecture is performed using a transfer function method and validated by industry-standard software simulation tools. The circuit shows high potential in achieving desired performance with lower input RF power when compared to the another configuration based on a generalized Mach–Zehnder interferometer structure. Although the operating range in terms of applied RF drive becomes narrow, low RF input operation can be achieved by this circuit. The effect of imbalances in the key circuit parameters is also investigated in terms of electrical side harmonic suppression ratio.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Computationally Efficient Multiscale Neural Networks Applied to Fluid Flow in Complex 3D Porous Media

Abstract The permeability of complex porous materials is of interest to many engineering disciplines. This quantity can be obtained via direct flow simulation, which provides the most accurate results, but is very computationally expensive. In particular, the simulation convergence time scales poorly as the simulation domains become less porous or more heterogeneous. Semi-analytical models that rely on averaged structural properties (i.e., porosity and tortuosity) have been proposed, but these features only partly summarize the domain, resulting in limited applicability. On the other hand, data-driven machine learning approaches have shown great promise for building more general models by virtue of accounting for the spatial arrangement of the domains’ solid boundaries. However, prior approaches building on the convolutional neural network (ConvNet) literature concerning 2D image recognition problems do not scale well to the large 3D domains required to obtain a representative elementary volume (REV). As such, most prior work focused on homogeneous samples, where a small REV entails that the global nature of fluid flow could be mostly neglected, and accordingly, the memory bottleneck of addressing 3D domains with ConvNets was side-stepped. Therefore, important geometries such as fractures and vuggy domains could not be modeled properly. In this work, we address this limitation with a general multiscale deep learning model that is able to learn from porous media simulation data. By using a coupled set of neural networks that view the domain on different scales, we enable the evaluation of large ( $$>512^3$$ > 512 3 ) images in approximately one second on a single graphics processing unit. This model architecture opens up the possibility of modeling domain sizes that would not be feasible using traditional direct simulation tools on a desktop computer. We validate our method with a laminar fluid flow case using vuggy samples and fractures. As a result of viewing the entire domain at once, our model is able to perform accurate prediction on domains exhibiting a large degree of heterogeneity. We expect the methodology to be applicable to many other transport problems where complex geometries play a central role.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Combinatorial Labeling Method for Improving Peptide Fragmentation in Mass Spectrometry

Annotation of peptide sequence from tandem mass spectra constitutes the central step of mass spectrometry-based proteomics. Peptide mass spectra are obtained upon gas-phase fragmentation. Identification of the protein from a set of experimental peptide spectral matches is usually referred as protein inference. Occurrence and intensity of these fragment ions in the MS/MS spectra are dependent on many factors such as amino acid composition, peptide basicity, activation mode, protease, etc. Particularly, chemical derivatizations of peptides were known to alter their fragmentation. In this study, the influence of acetylation, guanidinylation, and their combination on peptide fragmentation was assessed initially on a lipase (LipA) from Bacillus subtilis followed by a bovine six protein mix digest. The dual modification resulted in improved fragment ion occurrence and intensity changes, and this resulted in the equivalent representation of b- and y-type fragment ions in an ion trap MS/MS spectrum. The improved representation has allowed us to accurately annotate the peptide sequences de novo. Dual labeling has significantly reduced the false positive protein identifications in standard bovine six peptide digest. Our study suggests that the combinatorial labeling of peptides is a useful method to validate protein identifications for high confidence protein inference. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗