Search NASA⌕ Search

SEARCH · Search NASA

Results for “velocity model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Accelerating Ice Loss from the Fastest Greenland and Antarctic Glaciers

Ice discharge from the fastest glaciers draining the Greenland and Antarctic ice sheets . Jakobshavn Isbrae (JI) and Pine Island Glacier (PIG). continues to increase, and is now more than double that needed to balance snowfall in their catchment basins. Velocity increase probably resulted from decreased buttressing from thinning (and, for JI, breakup) of their floating ice tongues, and from reduced basal drag as grounding lines on both glaciers retreat. JI flows directly into the ocean as it becomes afloat, and here creep rates are proportional to the cube of bed depth. Rapid thinning of the PIG ice shelf increases the likelihood of its breakup, and subsequent rapid increase in discharge velocity. Results from a simple model indicate that JI velocities should almost double to >20 km/a by 2015, with velocities on PIG increasing to >10 km/a after breakup of its ice shelf. These high velocities would probably be sustained over many decades as the glaciers retreat within their long, very deep troughs. Resulting sea ]level rise would average about 1.5 mm/a.

Thomas, R.↗
NASA NTRS1982

A mathematical model of turbulence in flows with uniform stationary velocity gradients

Certain cases of turbulence as a postinstability state of a fluid in motion modeled by the introduction of multivalued velocity fields are examined. The turbulence is regarded as occurring in the form of random pulsations which grow until the external energy input in the average flow is balanced by the dissipated energy of pulsations by means of turbulent friction. Closed form analytic solutions are shown to be possible when the considered velocity fields, the pulsation velocity and the fluid velocity, are decoupled.

Zak, M. A.↗
NASA NTRS1994

The kinematics of dense clusters of galaxies. 3: Comparison with cosmological models

We compare the combined distribution of 31 group and 25 cluster velocity dispersions with the ensemble of 32 models for the formation and evolution of large-scale structure examined by Weinberg & Cole (1992). The models include Gaussian and non-Gaussian initial fluctuations, different power law spectra (n = -1, n = 0, n = -2, 'pancake'), flat (Omega = 1) and open (Omega = 0.2) cosmologies, and unbiased (b(sub 8) = 1) and biased (b(sub 8) = 2) galaxy formation. The set of initial conditions we test, although limited, samples enough parameter space to indicate which general classes of models are consistent with the data. The two Gaussian, n = -1 models which best approximate the standard and open Cold Dark Matter (CDM) models do not match the observed distribution of velocity dispersions; models with b(sub 8) = 2 and Omega = 1 ('standard') or b(sub 8) = 1 and Omega = 0.2 ('open') predict too large a ratio of low to high velocity dispersion systems. A 'COBE-normalized' CDM model with b(sub 8) = 1 and Omega = 1 produces clusters with velocity dispersions higher than those measured. All three models overestimate the total abundance of systems.

Zabludoff, Ann I.↗
NASA NTRS2022

Solar Flare Heating with Turbulent Suppression of Thermal Conduction

During solar flares plasma is typically heated to very high temperatures, and the resulting redistribution of energy via thermal conduction is a primary mechanism transporting energy throughout the flaring solar atmosphere. The thermal flux is usually modeled using Spitzer’s theory, which is based on local Coulomb collisions between the electrons carrying the thermal flux and those in the background. However, often during flares, temperature gradients become sufficiently steep that the collisional mean free path exceeds the temperature gradient scale size, so that thermal conduction becomes inherently non-local. Further, turbulent angular scattering, which is detectable in nonthermal widths of atomic emission lines, can also act to increase the collision frequency and so suppress the heat flux. Recent work by Emslie & Bian (2018) extended Spitzer’s theory of thermal conduction to account for both non-locality and turbulent suppression. We have implemented their theoretical expression for the heat flux (which is a convolution of the Spitzer flux with a kernel function) into the RADYN flare-modeling code and performed a parameter study to understand how the resulting changes in thermal conduction affect flare dynamics and hence the radiation produced. We find that models with reduced heat fluxes predict slower bulk flows, less intense line emission, and longer cooling times. By comparing features of atomic emission lines predicted by the models with Doppler velocities and nonthermal line widths deduced from a particular flare observation, we find that models with suppression factors between 0.3 to 0.5 relative to the Spitzer value best reproduce observed Doppler velocities across emission lines forming over a wide range of temperatures. Interestingly, the model that best matches observed nonthermal line widths has a kappa-type velocity distribution function

Solar flares↗
NASA NTRS1993

A comparison of arcjet plume properties to model predictions

This paper describes an experimental study of the plasma plume properties of a 1 kW class hydrogen arcjet thruster and the comparison of measured temperature and velocity field to model predictions. The experiments are based on laser-induced fluorescence excitation of the Balmer-alpha transition. The model is based on a single-fluid magnetohydrodynamic description of the flow originally developed to predict arcjet thruster performance. Excellent agreement between model predictions and experimental velocity is found, despite the complex nature of the flow. Measured and predicted exit plane temperatures are in disagreement by as much as 2000K over a range of operating conditions. The possible sources for this discrepancy are discussed.

Cappelli, M. A.↗
NASA NTRS1987

Modeling of turbulent transport as a volume process

An alternative type of modeling was proposed for the turbulent transport terms in Reynolds-averaged equations. One particular implementation of the model was considered, based on the two-point velocity correlations. The model was found to reproduce the trends but not the magnitude of the nonisotropic behavior of the turbulent transport. Some interesting insights were developed concerning the shape of the contracted two-point correlation volume. This volume is strongly deformed by mean shear from the spherical shape found in unstrained flows. Of particular interest is the finding that the shape is sharply waisted, indicating preferential lines of communication, which should have a direct effect on turbulent transfer and on other processes.

Jennings, Mark J.↗
NASA NTRSDate not supplied

Uncertainty Quantification of Classical Theories of Dendritic Growth Kinetics Applied to Nickel-Based Alloys

The solidification velocity in a model nickel-alloy single crystal during laser spot melting was recently characterized using synchrotron X-ray imaging. The measured solidification velocity was found to exceed the absolute stability threshold predicted by the Kurz-Giovanola-Trivedi (KGT) model. The discrepancies between the model and experiments motivate the further assessment of accurate material properties. This work quantifies the impact material property uncertainty has on model predictions of the absolute stability threshold velocities. Properties from the literature are reviewed and compared to those calculated using computational thermodynamics to provide uncertainty estimates on input properties to the KGT model. Global sensitivity analysis is used to quantify the influence of each uncertain input property on the predicted threshold velocity. This work supports the understanding of the nickel-alloy solidification during powder bed fusion additive manufacturing and identifies the solidification material properties that are the most important to assess from first-principles computations and experiments.

Computational thermodynamics↗
DOE OSTI2023

Theoretical investigation of braking of tearing mode rotation by resistive walls in ITER

The locking of the 2/1 tearing mode to the resistive wall in the ITER tokamak (15 MA inductive scenario 2) is investigated theoretically using a cylindrical asymptotic matching model. The model takes into account the fact that ITER plasmas will effectively be surrounded by two walls; the inner blanket module layer with a time constant of about 23 ms, and the outer vacuum vessel with a time constant of about 380 ms. The model also takes cognizance of the fact that neither the blanket module layer nor the vacuum vessel can be accurately described as “thin” walls (in the ordinarily accepted sense). The model incorporates changes in both the plasma poloidal and the toroidal angular velocity profiles, in response to the electromagnetic braking torque that develops at the rational surface, because it turns out that neoclassical poloidal flow-damping is not strong enough to completely suppress changes in the poloidal velocity. Finally, the model accurately calculates changes in the poloidal and toroidal plasma angular velocity profiles by evolving the full angular equations of motion, taking the electromagnetic braking torque, plasma inertia, plasma viscosity, and poloidal flow-damping into account. The time required for the 2/1 tearing mode to grow from a small amplitude to a sufficient one to lock to the walls is found to be about 3.5 s. As a result, the critical full radial island width at which wall locking is triggered is found to be about 9% of the plasma minor radius.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1985

Comparison of calculated and measured velocities near the tip of a model rotor blade at transonic speeds

The ability of the ROT22 code to predict accurately the transonic flow field in the crucial region around and beyond the tip of a high speed rotor blade was assessed. The computations were compared with extensive laser velocimetry measurements made at zero advance ratio and tip Mach numbers of 0.85, 0.88, 0.90, and 0.95. The comparison between theory and experiment was made using 300 scans for the three orthogonal velocity components covering a volume having a height of over one blade chord, a width of nearly two chords, and a length ranging from about 1 to 1.6 chords, depending on the tip speeds. The good agreement between the calculated and measured velocities established the ability of the code to predict the off blade flow field at high tip speeds. This supplements previous comparisons where surface pressures were shown to be well predicted on two different tips at advance ratios to 0.45, especially at the critical 90 deg azimuth blade position. These results demonstrate that the ROT22 code can be used with confidence to predict the important tip region flow field including the occurrence, strength, and location of shock waves causing high drag and noise.

Tauber, M. E.↗
DOE OSTI2021

Atomic Iron and Nickel in the Coma of C/1996 B2 (Hyakutake): Production Rates, Emission Mechanisms, and Possible Parents

Abstract Two papers recently reported the detection of gaseous nickel and iron in the comae of over 20 comets from observations collected over two decades, including interstellar comet 2I/Borisov. To evaluate the state of the laboratory data in support of these identifications, we reanalyzed archived spectra of comet C/1996 B2 (Hyakutake), one of the nearest and brightest comets of the past century, using a combined experimental and computational approach. We developed a new, many-level fluorescence model that indicates that the fluorescence emissions of Fe I and Ni I vary greatly with heliocentric velocity. Combining this model with laboratory spectra of an Fe-Ni plasma, we identified 22 lines of Fe I and 14 lines of Ni I in the spectrum of Hyakutake. Using Haser models, we estimate the nickel and iron production rates as Q Ni = (2.6–4.1) × 10 22 s −1 and Q Fe = (0.4–2.8) × 10 23 s −1 . From derived column densities, the Ni/Fe abundance ratio log 10 [Ni/Fe] = −0.15 ± 0.07 deviates significantly from solar abundance ratios, and it is consistent with the ratios observed in solar system comets. Possible production and emission mechanisms are analyzed in the context of existing laboratory measurements. Based on the observed spatial distributions, excellent fluorescence model agreement, and Ni/Fe ratio, our findings support an origin consisting of a short-lived unknown parent followed by fluorescence emission. Our models suggest that the strong heliocentric velocity dependence of the fluorescence efficiencies can provide a meaningful test of the physical process responsible for the Fe I and Ni I emission.

Bromley, S. J. (ORCID:0000000321108152)↗
NASA NTRS1985

Viscosity profile of the lower mantle

The viscosity of the earth's mantle is an important factor in studies of mantle convection and other problems in geodynamics. The present investigation is concerned with a determination of the variation of effective viscosity across the lower mantle from models of the Gibb's free energy of activation G(asterisk) and the adiabatic temperature profile. The variation of G(asterisk) with depth is calculated using both an elastic strain energy model, in which G(asterisk) is related to the seismic velocities, and a model which assumes G(asterisk) is proportional to the melting temperature.

Ellsworth, K.↗
DOE OSTI2025

Exploring the interaction between the MW and LMC with a large sample of blue horizontal branch stars from the DESI survey

The Large Magellanic Cloud (LMC) is a Milky Way (MW) satellite that is massive enough to gravitationally attract the MW disc and inner halo, causing significant motion of the inner MW with respect to the outer halo. In this work, we probe this interaction by constructing a sample of 9866 blue horizontal branch (BHB) stars with radial velocities from the DESI spectroscopic survey out to 120 kpc from the Galactic centre. This is the largest spectroscopic set of BHB stars in the literature to date, and it contains four times more stars with Galactocentric distances beyond 50 kpc than previous BHB catalogues. Using the DESI BHB sample combined with SDSS BHBs, we measure the bulk radial velocity of stars in the outer halo and observe that the velocity in the Southern Galactic hemisphere is different by 3.7σ from the North. Modelling the projected velocity field shows that its dipole component is directed at a point 22 deg away from the LMC along its orbit, which we interpret as the travel direction of the inner MW. The velocity field includes a monopole term that is –24 km s –1 ⁠, which we refer to as compression velocity. This velocity is significantly larger than predicted by the current models of the MW and LMC interaction. This work uses DESI data from its first 2 yr of observations, but we expect that with upcoming DESI data releases, the sample of BHB stars will increase and our ability to measure the MW–LMC interaction will improve significantly.

Galaxy: evolution↗
NASA NTRS1990

A subgrid-scale model based on the second-order velocity structure function

A series of tests were performed to help extend the use of a subgrid-scale model to compressible and wall-bounded flows. A priori tests were done in the case of the incompressible turbulent channel flow. They showed that a 1-D formulation of the structure-function model is more appropriate, leading to a satisfactory behavior of the model at the walls without requiring any damping function. This model is consistent with the original formulation of Metais & Lesieur (1990). In large-eddy simulations of compressible isotropic turbulence, both models performed well up to an initial rms Mach number of 0.6.

Comte, P.↗
DOE OSTI2023

Frozen Hydrometeor Terminal Fall Velocity Dependence on Particle Habit and Riming as Observed by Vertically Pointing Radars

Vertically pointing Ka-band radar measurements are used to derive fall velocity–reflectivity factor ($V$ t = $aZ$$^{b}_{e}$) relations for frozen hydrometeor populations of different habits during snowfall events observed at Oliktok Point, Alaska, and at the Multidisciplinary Drifting Observatory for the Study of Arctic Climate (MOSAiC). Case study events range from snowfall with highly rimed particles observed during periods with large amounts of supercooled liquid water path (LWP > 320 g m –2 ) to unrimed snowflakes including instances when pristine planar crystals were the dominant frozen hydrometeor habit. The prefactor a and the exponent b in the observed $V$ t –$Z$ e relations scaled to the sea level vary in the approximate ranges 0.5–1.4 and 0.03–0.13, respectively (reflectivities are in mm 6 m –3 and velocities are in m s –1 ). The coefficient a values are the smallest for planar crystals (a ~ 0.5) and the largest (a > 1.2) for particles under severe riming conditions with high LWP. There is no clear distinction between b values for high and low LWP conditions. The range of the observed $V$ t –$Z$ e relation coefficients is in general agreement with results of modeling using fall velocity–size (υ t = αD β ) relations for individual particles found in literature for hydrometeors of different habits, though there is significant variability in α and β coefficients from different studies even for a same particle habit. Correspondences among coefficients in the $V$ t –$Z$ e relations for particle populations and in the individual particle υ t –$D$ relations are analyzed. Furthermore, these correspondences and the observed $V$ t –$Z$ e relations can be used for evaluating different frozen hydrometeor fall velocity parameterizations in models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Force Balance Model Assessment for Mechanistic Prediction of Sliding Bubble Velocity in Vertical Subcooled Boiling Flow

The bubble sliding after departing from nucleation site is frequently observed in flow boiling systems and, the crucial impact on wall heat transfer has been evidenced through many experiments. As a result, the heat transfer modeling associated with sliding bubble has become one of the subjects of great attention in CFD boiling heat transfer community. The modeling efforts are primarily aimed at improving the existing Heat Flux Partitioning (HFP) model via the implementation of sliding bubble-induced heat transfer. The performance of HFP model depends inherently on the fidelity of sub-models used to predict the fundamental bubble parameters (e.g., bubble departure/lift-off diameter). In the same context, the accurate prediction of sliding bubble parameters (e.g., sliding bubble growth, sliding bubble velocity) is essential to achieving the successful heat transfer modeling associated with sliding bubble. Of many sliding bubble parameters, this paper deals with the sliding bubble velocity. Specifically, the force balance model was assessed in view of the sliding bubble velocity prediction. The parametric effect of key sub-models (e.g., drag force, bubble growth models) used in the force balance equation was investigated. The experimental data from Maity (2000) and Yoo et al. (2016) were used for demonstrating the model predictive performance. It was found that the force balance model proposed in this study was able to predict well the bubble sliding velocity based on the accurate prediction of bubble growth during sliding. The predictive performance was proven with the experimental data measured under various subcooled boiling conditions of both water and refrigerant (NOVEC-7000) flowing upward in vertical channels.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Numerical simulations of membrane distillation systems with actively heated membranes

Membrane distillation (MD) is a thermal desalination process that is gaining attention for treating hypersaline brines. One recent approach uses composite membranes with a thermally conductive layer that delivers heat to the membrane–feed interface, where it drives evaporation. Though this increases single-pass recovery, it comes with the challenge of promoting lateral heat conduction through the thin membrane. Herein, we develop a 3D, computational fluid dynamics (CFD) model that simulates conjugate heat, mass, and momentum transport in the feed channel and composite membrane. We then use the CFD to verify a simpler numerical model that approximates the feed velocity field analytically. We validate the numerical model experimentally, and use it to investigate the impacts of the conductive layer thickness, feed channel geometry, and operating conditions on temperature and concentration polarization, permeate production, and specific energy consumption. Overall, we find that lateral heating increases permeate production at the expense of increased concentration polarization. In extreme cases, the concentration increases more than four-fold along the membrane surface. Furthermore, we show however, that the feed flow rate and conductive layer thickness can be tailored to mitigate concentration polarization, for only a small reduction in permeate production.

42 ENGINEERING↗