Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACTINIDE COMPLEXES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Uranium (VI) solubility in carbonate-free ERDA-6 brine

When present, uranium is usually an element of importance in a nuclear waste repository. In the Waste Isolation Pilot Plant (WIPP), uranium is the most prevalent actinide component by mass, with about 647 metric tons to be placed in the repository. Therefore, the chemistry of uranium, and especially its solubility in the WIPP conditions, needs to be well determined. Long-term experiments were performed to measure the solubility of uranium (VI) in carbonate-free ERDA-6 brine, a simulated WIPP brine, at pC{sub H+} values between 8 and 12.5. These data, obtained from the over-saturation approach, were the first repository-relevant data for the VI actinide oxidation state. The solubility trends observed pointed towards low uranium solubility in WIPP brines and a lack of amphotericity. At the expected pC{sub H+} in the WIPP ({approx} 9.5), measured uranium solubility approached 10{sup -7} M. The objective of these experiments was to establish a baseline solubility to further investigate the effects of carbonate complexation on uranium solubility in WIPP brines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

FCRD Transmutation Fuels Handbook 2015

Transmutation of minor actinides such as Np, Am, and Cm in spent nuclear fuel is of international interest because of its potential for reducing the long-term health and safety hazards caused by the radioactivity of the spent fuel. One important approach to transmutation (currently being pursued by the DOE Fuel Cycle Research & Development Advanced Fuels Campaign) involves incorporating the minor actinides into U-Pu-Zr alloys, which can be used as fuel in fast reactors. It is, therefore, important to understand the properties of U-Pu-Zr alloys, both with and without minor actinide additions. In addition to requiring extensive safety precautions, alloys containing U and Pu are difficult to study for numerous reasons, including their complex phase transformations, characteristically sluggish phase-transformation kinetics, tendency to produce experimental results that vary depending on the histories of individual samples, and sensitivity to contaminants such as oxygen in concentrations below a hundred parts per million. Many of the experimental measurements were made before 1980, and the level of documentation for experimental methods and results varies widely. It is, therefore, not surprising that little is known with certainty about U-Pu-Zr alloys, and that general acceptance of results sometimes indicates that there is only a single measurement for a particular property. This handbook summarizes currently available information about U, Pu, Zr, and alloys of two or three of these elements. It contains information about phase diagrams and related information (including phases and phase transformations); heat capacity, entropy, and enthalpy; thermal expansion; and thermal conductivity and diffusivity. In addition to presenting information about materials properties, it attempts to provide information about how well the property is known and how much variation exists between measurements. Although the handbook includes some references to publications about modeling, its primary focus is experimental data. Most of the data has been published elsewhere (although scattered throughout numerous references, some quite obscure); however, some data is presented here for the first time.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Utilization of Methacrylates and Polymer Matrices for the Synthesis of Ion Specific Resins

Disposal, storage, and/or transmutation of actinides such as americium (Am) will require the development of specific separation schemes. Existing efforts focus on solvent extraction systems for achieving suitable separation of actinide from lanthanides. However, previous work has shown the feasibility of ion-imprinting polymer-based resins for use in ion-exchange-type separations with metal ion recognition. Phenolic-based resins have been shown to function well for Am-Eu separations, but these resins exhibited slow kinetics and difficulties in the imprinting process. This project addresses the need for new and innovative methods for the selective separation of actinides through novel ion-imprinted resins. The project team will explore incorporation of metals into extended frameworks, including the possibility of 3D polymerized matrices that can serve as a solid-state template for specific resin preparation. For example, an anhydrous trivalent f-element chain can be formed directly from a metal carbonate, and methacrylic acid from water. From these simple coordination complexes, molecules of discrete size or shape can be formed via the utilization of coordinating ligands or by use of an anionic multi-ligand system incorporating methacrylate. Additionally, alkyl methyl methacrylates have been used successfully to create template nanospaces, which underscores their potential utility as 3D polymerized matrices. This evidence provides a unique route for the preparation of a specific metal ion template for the basis of ion-exchange separations. Such separations may prove to be excellent discriminators of metal ions, even between f-elements. Resins were prepared and evaluated for sorption behavior, column properties, and proton exchange capacity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Rational Ligand Design for U(VI) and Pu(IV)

Nuclear power is an attractive alternative to hydrocarbon-based energy production at a time when moving away from carbon-producing processes is widely accepted as a significant developmental need. Hence, the radioactive actinide power sources for this industry are necessarily becoming more widespread, which is accompanied by the increased risk of exposure to both biological and environmental systems. This, in turn, requires the development of technology designed to remove such radioactive threats efficiently and selectively from contaminated material, whether that be contained nuclear waste streams or the human body. Raymond and coworkers (University of California, Berkeley) have for decades investigated the interaction of biologically-inspired, hard Lewis-base ligands with high-valent, early-actinide cations. It has been established that such ligands bind strongly to the hard Lewis-acidic early actinides, and many poly-bidentate ligands have been developed and shown to be effective chelators of actinide contaminants in vivo. Work reported herein explores the effect of ligand geometry on the linear U(IV) dioxo dication (uranyl, UO 2 2+ ). The goal is to utilize rational ligand design to develop ligands that exhibit shape selectivity towards linear dioxo cations and provides thermodynamically favorable binding interactions. The uranyl complexes with a series of tetradentate 3-hydroxy-pyridin-2-one (3,2-HOPO) ligands were studied in both the crystalline state as well as in solution. Despite significant geometric differences, the uranyl affinities of these ligands vary only slightly but are better than DTPA, the only FDA-approved chelation therapy for actinide contamination. The terepthalamide (TAM) moiety was combined into tris-beidentate ligands with 1,2- and 3,2-HOPO moieties were combined into hexadentate ligands whose structural preferences and solution thermodynamics were measured with the uranyl cation. In addition to achieving coordinative saturation, these ligands exhibited increased uranyl affinity compared to bis-Me-3,2-HOPO ligands. This result is due in part to their increased denticity, but is primarily the result of the presence of the TAM moiety. In an effort to explore the relatively unexplored coordination chemistry of Pu(IV) with bidentate moieties, a series of Pu(IV) complexes were also crystallized using bidentate hydroxypyridinone and hydroxypyrone ligands. The geometries of these complexes are compared to that of the analogous Ce(IV) complexes. While in some cases these showed the expected structural similarities, some ligand systems led to significant coordination changes. A series of crystal structure analyses with Ce(IV) indicated that these differences are most likely the result of crystallization condition differences and solvent inclusion effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CMPO-Functionalized Silica Sorbents for pH-Tunable Separation and Enrichment of Rare-Earth Elements from Environmental Matrices

Rare-earth elements (REEs) are crucial in many applications, yet mutual separation is challenging due to their similar chemical behavior. Octylphenyl- N,N-diisobutyl carbamoyl methyl phosphine oxide (CMPO) is an organophosphorus ligand originally developed for extracting actinides and lanthanides from spent nuclear fuel. Here, we report a pH-tunable CMPOfunctionalized silica sorbent for selective REE separation from complex aqueous matrices. A CMPO-associated silica gel sorbent was synthesized and characterized by Brunauer−Emmett−Teller (BET) surface area, scanning electron microscopy, and X-ray photoelectron spectroscopy to confirm the surface functionalization and binding behavior. Sorbent performance was evaluated by using a synthetic 46- element solution and a real phosphate rock fertilizer leachate. Notably, REEs were successfully eluted with ultrapure water, demonstrating reversible desorption controlled by pH adjustment. Packed-bed column studies increased the REE mass fraction from 3.6% to 64% (20-fold enrichment), with up to 30-fold enrichment of neodymium. The adsorption process follows the Langmuir isotherm behavior and follows pseudo-second-order kinetics. The uptake capacity of 1 μmol of REEs per 4.2 μmol of CMPO supports the formation of a predominantly 4:1 ligand:rare earth element(III) pseudocomplex. These results demonstrate CMPO-functionalized silica as a selective, water-elutable, and low-chemical-input platform for sustainable REE recovery from environmental and industrial sources.

chelating ligands↗

Prioritization Study of Elements Relevant to RIMS Counter-WMD

A systematic study of the priority in which elements should be investigated in order to maximize the possible impact on RIMS Counter-WMD research has been carried out. Candidate elements included U, Th, transuranic elements, and select fission products such as Tc and Eu. This list has been updated to reflect assessments based on potential utility to debris diagnostics as well as the degree of complexity required to develop the RIMS method for the measurement of expected isotope abundances. Factors considered in this study include production of actinides in a fission environment, the existence of available resonance ionization-specific spectroscopic work, as well as practical experimental considerations (sample synthesis for research and activity/safety considerations). The resultant prioritized list of additional elements (beyond U) to be carried forward in this study are, in order of interest, Pu, Am, and Np. If resources and time lines permit, we would also like to investigate Th and Eu. Cm would be a final choice due to the logistics of creating and handling higher activity, short-lived materials, and the paucity of pre-existing spectroscopic studies.

36 MATERIALS SCIENCE↗

Selectivity in ligand binding to uranyl compounds: A synthetic, structural, thermodynamic and computational study

The uranyl cation (UO₂²⁺) is the most abundant form of uranium on the planet. It is estimated that 4.5 billion tons of uranium in this form exist in sea water. The ability to bind and extract the uranyl cation from aqueous solution while separating it from other elements would provide a limitless source of nuclear fuel. A large body of research concerns the selective recognition and extraction of uranyl. A stable molecule, the cation has a linear O=U=O geometry. The short U-O bonds (1.78 Å) arise from the combination of uranium 5f/6d and oxygen 2p orbitals. Due to the oxygen moieties being multiply bonded, these sites were not thought to be basic enough for Lewis acidic coordination to be a viable approach to sequestration. The goal of this research is thus to broaden the coordination chemistry of the uranyl ion by studying new ligand systems via synthetic, structural, thermodynamic and computational methods. It is anticipated that this fundamental science will find use beyond actinide separation technologies in areas such as nuclear waste remediation and nuclear materials. The focus of this study is to synthesize uranyl complexes incorporating amidinate and guanidinate ligands. Both synthetic and computational methods are used to investigate novel equatorial ligand coordination and how this affects the basicity of the oxo ligands. Such an understanding will later apply to designing ligands incorporating functionalities that can bind uranyl both equatorially and axially for highly selective sequestration. Efficient and durable chromatography supports for lanthanide separation will be generated by (1) identifying robust peptoid-based ligands capable of binding different lanthanides with variable affinities, and (2) developing practical synthetic methods for the attachment of these ligands to Dowex ion exchange resins.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Treatment of Uranium and Plutonium Solutions Generated in the Atalante Facility, France - 12004

The Atalante complex operated by the French Alternative Energies and Atomic Energy Commission (CEA) at the Rhone Valley Research Center consolidates research programs on actinide chemistry, especially separation chemistry, processing for recycling spent fuel, and fabrication of actinide targets for innovative concepts in future nuclear systems. The design of future systems (Generation IV reactors, material recycling) will increase the uranium and plutonium flows in the facility, making it important to anticipate the stepped-up activity and provide Atalante with equipment dedicated to processing these solutions to obtain a mixed uranium-plutonium oxide that will be stored pending reuse. Ongoing studies for integral recycling of the actinides have highlighted the need for reserving equipment to produce actinides mixed oxide powder and also minor actinides bearing oxide for R and D purpose. To meet this double objective a new shielded line should be built in the facility and should be operational 6 years after go decision. The main functions of the new unit would be to receive, concentrate and store solutions, purify them, ensure group conversion of actinides and conversion of excess uranium. This new unit will be constructed in a completely refurbished building devoted to subcritical and safe geometry of the process equipments. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

EFRC Materials Science of Actinides (Final Report)

The Energy Frontier Research Center Materials Science of Actinides (MSA) conducted basic research from 2009-2019. The scientific personnel and participating institutes changed several times during the evolution of the Center, and in total included 24 senior investigators, four national laboratories, and ten universities. Workforce development was a motivating goal of the university-led Center, which included many undergraduate, graduate, and post-doctoral researchers. The center focused on the actinide elements, which arise from the sequential filling of the 5f electron orbitals. Although the specific themes evolved during the Center’s history, the final research themes were: (1) Nanoscale Cage Clusters, (2) Complex Ceramic and Metallic Materials, and (3) Materials Under Extreme Environments. To date, the Center has produced 254 peer-reviewed journal publications and book chapters that acknowledged only the EFRC funding, and an additional 161 journal publications and book chapters that acknowledged funding from the EFRC and additional sources (a few manuscripts are still in preparation). Broad highlights include: (1) Development of an extensive family of actinide nanomaterials that self-assemble in aqueous solution, an understanding of their formation mechanisms and stabilities, and possible uses in nuclear fuel cycles; (2) Establishment of facilities and methodologies to conduct high-temperature calorimetry on transuranium materials, and extensive thermodynamic-based studies of uranium and thorium compounds important to the nuclear fuel cycle; (3) A vastly improved understanding of the behavior of actinide materials in extreme conditions, including high radiation fields, temperatures, and pressures, as well coupled effects of two or more of these; (4) Development of resonance ultrasound spectroscopy and direct measurement of aging of plutonium alloys.

36 MATERIALS SCIENCE↗

Optical Absorption Characteristics For 7F0'→5L6' and 7F0'→7F6' Transitions of Trivalent Americium Ion in Aqueous Electrolyte Mixtures

Here, optical absorption features for 7 F 0 '→ 5 L 6' and 7 F0'→ 7 F 6' transitions of trivalent americium ion were investigated in a wide range of aqueous combinations of perchloric and nitric acids (0.1 – 6.0 mol L -1 ). The developed qualitative matrix of extinction coefficients measures the cumulative impact of increasing electrolyte content, changes of hydration of americium ion, and inner-sphere perturbation by nitrate on the absorbance. The effects of growing complexity of aqueous electrolyte medium were highlighted for the 7 F 0 '→ 5 L 6' transition. Spectroscopy indicates the perturbation of the inner hydration sphere of trivalent f-element by one nitrate ligand, whilst the accompanying stability constants for the interaction of europium ion with nitrate point to outer-sphere coordination of the f-element by the second nitrate.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Extraction Separation of Rare-Earth Ions via Competitive Ligand Complexations between Aqueous and Ionic-Liquid Phases

The extraction separation of rare earth elements is the most challenging separation processes in hydrometallurgy and advanced nuclear fuel cycles. The TALSPEAK process (Trivalent Actinide Lanthanide Separations by Phosphorus-reagent Extraction from Aqueous Komplexes) is a prime example of these separation processes. The objective of this paper is to explore the use of ionic liquids (ILs) for the TALSPEAK-like process, to further enhance its extraction efficiencies for lanthanides, and to investigate the potential of using this modified TALSPEAK process for separation of lanthanides among themselves. Eight imidazolium ILs ([Cnmim][NTf2] and [Cnmim][BETI], n=4,6,8,10) and one pyrrolidinium IL ([C4mPy][NTf2]) were investigated as diluents using di(2-ethylhexyl)phosphoric acid (HDEHP) as an extractant for separation of lanthanide ions from aqueous solutions of 50 mM glycolic acid or citric acid and 5 mM diethylenetriamine pentaacetic acid (DTPA). The extraction efficiencies were studied in comparison with diisopropylbenzene (DIPB), an organic solvent used as diluent for the conventional TALSPEAK extraction system. Excellent extraction efficiencies and selectivities were found for a number of lanthanide ions using HDEHP as an extractant in these ILs. The effects of different alkyl chain lengths in the cations of ILs and anions on extraction efficiencies and selectivities of lanthanide ions are also presented in this paper.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Trends in actinide electronic structure revealed from asymmetric, isostructural transuranic metallocenes

The study of actinide electronic structure and bonding within rigorously controlled environments is fundamental to advancing nuclear applications. Here, we report a new set of isostructural actinide organometallics; An(COT big ) 2 , (An = Th, U, Np, and Pu), where COT big is the bulky 1,4-bis(triphenylsilyl)-substituted cyclooctatetraenyl dianion (1,4-(Ph 3 Si) 2 C 8 H 6 ) 2 -. The actinide(IV) metallocene sandwiches have a clam-shell structure, offering a new molecular symmetry to explore f-orbital contributions in bonding. Combined experimental and computational studies reveal that An(COT big ) 2 complexes strongly differ from the previously published coplanar An(COT) 2 sandwiches due to the bent geometry and electron-withdrawing nature of the substituents. While COT big displays comparatively weaker electron donation, the low-energy f-f transitions in An(COT big ) 2 have increased molar absorptivity consistent with the removal of the parity selection rule and better energetic matching between ligand and actinide 5f orbitals as the series is traversed. For Pu(COT big ) 2 , covalent mixing of donor 5f metal orbitals and the ligand-π orbitals is especially strong.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trapping an Unexpected/Unprecedented Hexanuclear Ce(III) Hydrolysis Product with Neutral 4‐Amino‐1,2,4‐triazole

Using Ce(III) as both a representative lanthanide and actinide analog, the ability of mixtures of acidic and basic azoles to allow direct access to homoleptic N-donor f-element complexes in one pot reactions from hydrated salts as starting materials was examined by reacting mixtures of 4-amino-1,2,4-triazole (4-NH 2 -1,2,4-Triaz), 5-amino-tetrazole (5-NH 2 -HTetaz), and 1,2,3-triazole (1,2,3-HTriaz) in 1 : 1 and 1 : 3 ratios with CeCl 3 ⋅ 7H 2 O, [C 2 mim] 3 [CeCl 6 ] ([C 2 mim] + =1-ethyl-2-methylimidazolium), and Ce(NO 3 ) 3 ⋅ 6H 2 O. Although unsuccessful in our goal, structural analysis revealed that neutral 4-NH 2 -1,2,4-Triaz is structure directing via η 2 μ 2 κ 2 bridging, with the formation of the dinuclear complexes [Ce 2 Cl 2 (μ 2 -4-NH 2 -1,2,4-Triaz) 4 (H 2 O) 8 ]Cl 4 ⋅ 4H 2 O, [Ce 2 (μ 2 -4-NH 2 -1,2,4-Triaz) 4 (4-NH 2 -1,2,4-Triaz) 2 (Cl) 6 ], and [4-NH 2 -1,2,4-HTriaz][Ce 2 (μ 2 -4-NH 2 -1,2,4-Triaz) 2 (μ 2 -NO 3 )(NO 3 ) 6 (H 2 O) 2 ]. When the synthetic conditions favored hydrolysis, the hexanuclear Ce(III) complex [Ce 6 (μ 3 -O) 4 (μ 3 -OH) 2 (μ 3 -Cl) 2 (Cl) 6 (μ 2 -4-NH 2 -1,2,4-Triaz) 12 ] ⋅ 7H 2 O was isolated. This unexpected hydrolysis product represents the first example of a high nuclearity lanthanide complex where all Ln atoms are pairwise connected through 12 N-donor ligands or 12 neutral bridging ligands of any type, a rare example of incorporation of non-oxo coordinating anions in the M 6 X 8 core, and the first reported Ce(III) hexanuclear complex of this type.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Analysis of Curium, Promethium, and Early Lanthanides Using 2,2′:6′,2″-Terpyridine in the Presence of Acid

Trivalent lanthanides and actinides are difficult to separate, often relying on subtle differences in bonding between the 4f– and 5f–orbitals. However, trivalent Cm poses additional complexity owing to its half-filled 5f 7 shell. This configuration causes Cm to have very similar properties to several of the early lanthanides, more specifically, similarly sized Pm. In this study, similarities were probed through isolating an isostructural series between the early lanthanides (La–Eu) and Cm with the oligoamine 2,2′:6′2″-terpyridine in the presence of acid. Single-crystal X-ray diffraction studies highlighted the similarities of Pm and Cm under these conditions and further demonstrated the difficulty in separating these elements. Despite the similarities, differences exist between interactions of Pm and Cm with terpyridine in the solid state. Interestingly, Cm appears to be more similar to Sm than to Pm. Furthermore, this study continues to probe the fundamental chemistry of Pm and Cm with respect to slight differences that can be leveraged in their separation from each other.

Vogt, Trenton B. [Michigan State Univ., East Lansi↗

Demonstration of a Rapid HPLC-ICPMS Direct Coupling Technique Using IDMS- Project Report: Part II

Researchers working on chemical separations and inductively coupled plasma mass spectrometry have developed a rapid separation–direct analysis scheme to determine both concentration and isotopics of a suite of elements down to the low picogram level, with the ultimate goal of performing rapid analysis of postdetonation nuclear materials. The second phase in method development has shown that both the sensitivity and stability to achieve the precise, low-level analyses required can be maintained even when present in complex silicon- and uranium-based matrices. The methods analyte list has been expanded to incorporate a number of new analytes, notably the actinides plutonium, americium, curium, neptunium, and thorium and the key fission product zirconium. Key nonnatural fission product isotopic ratios in irradiated highly enriched uranium targets have been successfully measured at the low picogram level. The accuracy of these ratios was confirmed using an isotopic depletion and decay modeling software to within 1–2%.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Structure, Properties, and Theoretical Electronic Structure of UCuOP and Np3S5.

The compounds UCuOP and NpCuOP have been synthesized and their crystal structures were determined from low-temperature single-crystal X-ray data. These isostructural compounds crystallize with two formula units in space group P4/nmm of the tetragonal system. Each An atom (An = U or Np) is coordinated to four O and four P atoms in a distorted square antiprism; each Cu atom is coordinated to four P atoms in a distorted tetrahedron. Magnetic susceptibility measurements on crushed single crystals indicate that UCuOP orders antiferromagnetically at 224(2) K. Neutron diffraction experiments at 100 and 228 K show the magnetic structure of UCuOP to be type AFI ( - -) where ferromagnetically aligned sheets of U atoms in the (001) plane order antiferromagnetically along [001]. The electrical conductivity of UCuOP exhibits metallic character. Its electrical resistivity measured in the ordered region with the current flowing within the tetragonal plane is governed by the scattering of the conduction electrons on antiferromagnetic spin-wave excitations. The electrical resistivity of single-crystalline NpCuOP shows semimetallic character. It is dominated by a pronounced hump at low temperatures, which likely arises owing to long-range magnetic ordering below about 90 K. Density of state analyses using the local spin-density approximation show covalent overlap between AnO and CuP layers of the structure and dominant contributions from 5f-actinide orbitals at the Fermi level. Calculations on a 2 2 2 supercell of NpCuOP show ferromagnetic ordering within the Np sheets and complex coupling between these planes. Comparisons of the physical properties of these AnCuOP compounds are made with those of the family of related tetragonal uranium phosphide compounds.

Wells, Daniel M.↗

Impact of Irradiation-induced Lattice Defects and Dopants on Thermal Transport in Oxide Nuclear Fuels

Advanced nuclear reactor concepts aim to use fuels that must withstand unprecedented temperature and radiation extremes. In these fuels, thermal energy transport under irradiation is directly related to fuel longevity, reactor safety, and is arguably one of the most important performance metrics. Here we provide a comprehensive, first-principles-informed treatment of phonon mediated thermal transport in a defect-bearing actinide oxide with direct comparison to experimental measurements. Pristine and proton irradiated thorium dioxide was chosen as a model system to treat the complexity of thermal transport in the presence of lattice defects. A thermal transport model is implemented using the linearized Boltzmann transport equation (LBTE) with input from first principles calculations and defect evolution models. The output of the LBTE is compared directly to mesoscopic measurements of thermal conductivity on length scales commensurate with defect accumulation. Parametric measurements of conductivity with irradiation dose and temperature reveal a monotonic decrease in conductivity with irradiation dose, in the range of 0.001 dpa to 0.1 dpa. Besides radiation-induced defects, doping the thorium dioxide crystal with small quantities of uranium atoms also results in a drastic reduction in thermal conductivity. Temperature-dependent measurements of thermal conductivity in uranium-doped thorium dioxide single crystals suggests a resonant scattering mechanism is responsible for the observed reduction. This comprehensive, atomistic- to meso-scale treatment provides the necessary basis to investigate thermal transport under irradiation in more complex systems that exhibit strong electron correlation. This is a poster presentation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Quantifying the passive gamma signal from spent nuclear fuel in support of determining the plutonium content in spent nuclear fuel with nondestructive assay

The objective of safeguarding nuclear material is to deter diversions of significant quantities of nuclear materials by timely monitoring and detection. There are a variety of motivations for quantifying plutonium in spent fuel (SF), by means of nondestructive assay (NDA), in order to meet this goal. These motivations include the following: strengthening the capabilities of the International Atomic Energy Agencies ability to safeguard nuclear facilities, shipper/receiver difference, input accountability at reprocessing facilities and burnup credit at repositories. Many NDA techniques exist for measuring signatures from SF; however, no single NDA technique can, in isolation, quantify elemental plutonium in SF. A study has been undertaken to determine the best integrated combination of 13 NDA techniques for characterizing Pu mass in spent fuel. This paper focuses on the development of a passive gamma measurement system in support the spent fuel assay system. Gamma ray detection for fresh nuclear fuel focuses on gamma ray emissions that directly coincide with the actinides of interest to the assay. For example, the 186-keV gamma ray is generally used for {sup 235}U assay and the 384-keV complex is generally used for assaying plutonium. In spent nuclear fuel, these signatures cannot be detected as the Compton continuum created from the fission products dominates the signal in this energy range. For SF, the measured gamma signatures from key fission products ({sup 134}Cs, {sup 137}Cs, {sup 154}Eu) are used to ascertain burnup, cooling time, and fissile content information. In this paper the Monte Carlo modeling set-up for a passive gamma spent fuel assay system will be described. The set-up of the system includes a germanium detector and an ion chamber and will be used to gain passive gamma information that will be integrated into a system for determining Pu in SF. The passive gamma signal will be determined from a library of {approx} 100 assemblies that have been created to examine the capability of all 13 NDA techniques. Presented in this paper is a description of the passive gamma monitoring instrument, explanation of the work completed thus far involving the source set up methodology and the design optimization process, details of key fission product ratios of interest, limitations and key strengths of the measurement technique, and considerations for integrating this technique with other NDA techniques in order to develop a complete spent fuel assay strategy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗