SEARCH · Search NASA

Results for “APPROPRIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Bearing tester fit analysis

A NASTRAN model of the Bearing Tester was developed to determine the fit of its components while in use. The model was executed for three loading conditions involving appropriate thermal and pressure loading throughout: rotation (30,000 rpm), rotation with 5000 lb axial shaft loading, and rotation with 2000 lb lateral shaft loading. A 30 deg slice of the Bearing Tester was modeled with solid isoparametric elements (CIHEX). Five more slices were generated to form a 180 deg symmetrical half. Each component was modeled separately for two reasons: (1) in the heat transfer version each component required covering with appropriate heat transfer coefficient elements, and (2) for the displacement version each component required independent radial expansion with respect to adjacent components. The components are connected at fastener and bearing locations axially and/or tangentially. Differences in radial displacements of adjacent cylindrical surfaces were calculated and added to those differences calculated for 180 deg opposite locations to determine the diametric change.

Source record↗

NASA NTRS1985

Thermal stability of static coronal loops: Part 1: Effects of boundary conditions

The linear stability of static coronal-loop models undergoing thermal perturbations was investigated. The effect of conditions at the loop base on the stability properties of the models was considered in detail. The question of appropriate boundary conditions at the loop base was considered and it was concluded that the most physical assumptions are that the temperature and density (or pressure) perturbations vanish there. However, if the base is taken to be sufficiently deep in the chromosphere, either several chromospheric scale heights or several coronal loop lengths in depth, then the effect of the boundary conditions on loop stability becomes negligible so that all physically acceptable conditions are equally appropriate. For example, one could as well assume that the velocity vanishes at the base. The growth rates and eigenmodes of static models in which gravity is neglected and in which the coronal heating is a relatively simple function, either constant per-unit mass or per-unit volume were calculated. It was found that all such models are unstable with a growth rate of the order of the coronal cooling time. The physical implications of these results for the solar corona and transition region are discussed.

Antiochos, S. K.↗

NASA NTRS1985

Model Reduction for Control System Design

An approach and a technique for effectively obtaining reduced order mathematical models of a given large order model for the purposes of synthesis, analysis and implementation of control systems is developed. This approach involves the use of an error criterion which is the H-infinity norm of a frequency weighted error between the full and reduced order models. The weightings are chosen to take into account the purpose for which the reduced order model is intended. A previously unknown error bound in the H-infinity norm for reduced order models obtained from internally balanced realizations was obtained. This motivated further development of the balancing technique to include the frequency dependent weightings. This resulted in the frequency weighted balanced realization and a new model reduction technique. Two approaches to designing reduced order controllers were developed. The first involves reducing the order of a high order controller with an appropriate weighting. The second involves linear quadratic Gaussian synthesis based on a reduced order model obtained with an appropriate weighting.

Enns, D. F.↗

NASA NTRS1985

Investigations of radiation-induced and carrier-enhanced conductivity

A steady-state carrier computer code, PECK (Parker Enhanced Carrier Kinetics), that predicts the radiation-induced conductivity (RIC) produced in a dielectric by an electron beam was developed. The model, which assumes instantly-trapped holes, was then applied to experimental measurements on thin Kapton samples penetrated by an electron beam. Measurements at high bias were matched in the model by an appropriate choice for the trap-modulated electron mobility. A fractional split between front and rear currents measured at zone bias is explained on the basis of beam-scattering. The effects of carrier-enhanced conductivity (CEC) on data obtained for thick, free-surface Kapton samples is described by using an analytical model that incorporates field injection of carriers from the RIC region. The computer code, LWPCHARGE, modified for carrier transport, is also used to predict partial penetration effects associated with CEC in the unirradiated region. Experimental currents and surface voltages, when incorporated in the appropriate models, provide a value for the trap modulated mobility that is in essential agreement with the RIC results.

Meulenberg, A., Jr.↗

NASA NTRS1984

Microscopic optical potential analyses of carbon-carbon elastic scattering

Utilizing eikonal phase shifts determined from a microscopic double-folding optical potential, marked improvement in the agreement between theory and experiment, for elastic carbon-carbon scattering between 200 and 300 MeV, is obtained when only those values for the nucleon-nucleon slope parameter, appropriate for diffractive scattering, are used. The appropriateness of the perturbative eikonal expansion is discussed by comparison with recent results, obtained for the same potentials, using a more exact complex Wentzell-Kramers-Brillouin (WKB) formalism.

Bidasaria, H. B.↗

NASA NTRS1985

Magnetohydrodynamic thermal instabilities in cool inhomogeneous atmospheres

The stability of magnetic loops to current-driven filamentation instabilities is investigated. The unperturbed atmosphere is assumed to be composed of an (upper) isothermal optically thin low-density portion and a (lower) higher-density portion which is in radiative equilibrium; in both cases, the atmosphere is in hydrostatic equilibrium, so that gravitational stratification is taken into account. In order to provide specific equilibrium conditions for evaluation of the dispersion relation, conditions appropriate for the surface of a solar-type star are adopted; i.e., a fairly low temperature (T = 5000 K) appropriate for a 'precoronal' state associated, for example, with magnetic flux emerging from photospheric levels under the action of magnetic buoyancy. A linear stability analysis is performed, and numerical results show that physically plausible current densities, which would be generated by typical loop-footpoint motions, are effective in driving MHD instabilities in such a plasma. The instability growth rates are strongly dependent on the assumed current density distribution and on the density scale height.

Bodo, G.↗

NASA NTRS1985

An implicit time-marching method for studying unsteady flow with massive separation

A fully implicit time-marching method is developed such that all spatial derivatives are approximated using central differences, but no use is made of any artificial dissipation. The numerical method solves the discretized equations using Alternating Direction Implicit-Block Gaussian Elimination technique. The method is implemented in the unsteady analysis, which solves the incompressible Navier-Stokes equations in terms of vorticity and stream function in generalized orthogonal coordinates. A clustered conformal C-grid is employed, and every effort is made to resolve the various length scales in the flow problem. The metric discontinuity at the branch-cut is treated appropriately using analytic continuation. Introduction of the BGE reordering permits implicit treatment of the branch cut in the numerical method. The vorticity singularity at the cusped trailing edge is also appropriately treated. This accurate and efficient implicit method is used to study flow at Re = 1000, past a 12-percent thick symmetric Joukowski airfoil at high angle of attack 30 and 53 deg.

Osswald, G. A.↗

NASA NTRS1985

Structure variation of the index of refraction of GaAs-AlAs superlattices and multiple quantum wells

A detailed calculation of the index refraction of various GaAs-AlAs superlattices is presented for the first time. The calculation is performed by using a hybrid approach which combines the k-p method with the pseudopotential technique. Appropriate quantization conditions account for the influence of the superstructures on the electronic properties of the systems. The results of the model are in very good agreement with the experimental data. In comparison with the index of refraction of the corresponding AlGaAs alloy, characterized by the same average mole fraction of Al, the results indicate that the superlattice index of refraction values attain maxima at the various quantized transition energies. For certain structures the difference can be as large as 2 percent. These results suggest that the waveguiding and dispersion relation properties of optoelectronic devices can be tailored to design for specific optical application by an appropriate choice of the superlattice structure parameters.

Kahen, K. B.↗

NASA NTRS1985

Growth of Solid Solution Crystals

The major objective of this program is to determine the conditions under which single crystals of solid solutions can be grown from the melt in a Bridgman configuration with a high degree of chemical homogeneity. The central aim is to assess the role of gravity in the growth process and to explore the possible advantages for growth in the absence of gravity. The alloy system being investigated is the solid solution semiconductor with x-values appropriate for infrared detector applications in Hg sub (1-x) Cd sub x Te the 8 to 14 micro m wavelength region. Both melt and Te-solvent growth are being considered. The study consists of an extensive ground-based experimental and theoretical research effort followed by flight experimentation where appropriate. Experimental facilities have been established for the purification, casting, and crystal growth of the alloy system. Facilities have been also established for the metallurgical, compositional, electric and optical characterization of the alloys. Crystals are being grown by the Bridgman-Stockbarger method and are analyzed by various experimental techniques to evaluate the effects of growth conditions on the longitudinal and radial compositional variations and defect densities in the crystals.

Lehoczky, S. L.↗

NASA NTRS1985

A Fundamental Study of Smoldering with Emphasis on Experimental Design for Zero-G

The objective of this section of the microgravity project is to identify key sets of low-gravity experiments which would critically compliment a larger set of more easily performed normal-gravity experiments to explain the phenomena found in smoldering combustion. It is planned to follow through on the conceptual design of these experiments by participating in the future in the fabrication of the refined apparatus and in the data collection and interpretation. Low-gravity experiments are appropriate for smoldering combustion because of the complexity of smoldering which requires every means possible to discriminate among the many chemical and physical mechanisms active in most smoldering combustion scenarios. Efforts will be primarily analytical, attempting to identify appropriate approximations and dominant dimensionless groups based on existing data and state-of-the-art combustion modelling. Transient stability questions such as ignition, extinction and the choices among charring, tarring, or flaming modes will be included.

Pagni, P. J.↗

NASA NTRS1985

Numerical Techniques for Scattering from Submerged Objects

To represent the final results in terms of matrices, one expands all appropriate physical quantities in terms of partial wave basis states. This includes expansions for the incident and scattered fields and the surface quantities. The method then utilizes the Huygen-Poincare integral representation for both the exterior and interior solutions, leading to the required matrix equations. One thus deals with matrix equations, the complexity of which depends on the nature of the problem. It is shown that in general a transition matrix T can be obtained relating the incident field A with the scattered field f having the form T = PQ(-1), where f = TA. The structure of Q can be quite complicated and can itself be composed of other matrix inversions such as arise from layered objects. Recent improvements in this method appropriate for a variety of physical problems are focused on, and on their implementation. Results are outlined from scattering simulations for very elongated submerged objects and resonance scattering from elastic solids and shells. The final improvement concerns eigenfunction expansions of surface terms, arising from solution of the interior problem, obtained via a preconditioning technique. This effectively reduces the problem to that of obtaining eigenvalues of a Hermitian operator. This formalism is reviewed for scattering from targets that are rigid, sound-soft, acoustic, elastic solids, elastic shells, and elastic layered objects. Two sets of the more interesting results are presented. The first concerns scattering from elongated objects, and the second to thin elastic spheroids.

Werby, M. F.↗

NASA NTRS1985

Lasant Materials for Blackbody-Pumped Lasers

Blackbody-pumped solar lasers are proposed to convert sunlight into laser power to provide future space power and propulsion needs. There are two classes of blackbody-pumped lasers. The direct cavity-pumped system in which the lasant molecule is vibrationally excited by the absorption of blackbody radiation and laser, all within the blackbody cavity. The other system is the transfer blackbody-pumped laser in which an absorbing molecule is first excited within the blackbody cavity, then transferred into a laser cavity when an appropriate lasant molecule is mixed. Collisional transfer of vibrational excitation from the absorbing to the lasing molecule results in laser emission. A workshop was held at NASA Langley Research Center to investigate new lasant materials for both of these blackbody systems. Emphasis was placed on the physics of molecular systems which would be appropriate for blackbody-pumped lasers.

Deyoung, R. J.↗

NASA NTRS1985

Effects of muscle atrophy on motor control

As a biological tissue, muscle adapts to the demands of usage. One traditional way of assessing the extent of this adaptation has been to examine the effects of an altered-activity protocol on the physiological properties of muscles. However, in order to accurately interpret the changes associated with an activity pattern, it is necessary to employ an appropriate control model. A substantial literature exists which reports altered-use effects by comparing experimental observations with those from animals raised in small laboratory cages. Some evidence suggests that small-cage-reared animals actually represent a model of reduced use. For example, laboratory animals subjected to limited physical activity have shown resistance to insulin-induced glucose uptake which can be altered by exercise training. This project concerned itself with the basic mechanisms underlying muscle atrophy. Specifically, the project addressed the issue of the appropriateness of rats raised in conventional-sized cages as experimental models to examine this phenomenon. The project hypothesis was that rats raised in small cages are inappropriate models for the study of muscle atrophy. The experimental protocol involved: 1) raising two populations of rats, one group in conventional (small)-sized cages and the other group in a much larger (133x) cage, from weanling age (21 days) through to young adulthood (125 days); 2) comparison of size- and force-related characteristics of selected test muscles in an acute terminal paradigm.

Stuart, D. G.↗

NASA NTRS1986

University participation via UNIDATA, part 2

The University Corporation for Atmospheric Research (UCAR) is presently completing UNIDATA, Phase II, considered to be the design phase of the UNIDATA Project. The four major components of the UNIDATA System are: (1) global services which access is provided, (2) long haul communication for providing that access, (3) local services for providing access and local management of acquired data, and (4) local interactive processing and graphical display. Each component is described in detail with linkages among the components elucidated. Within this framework, access to the PCDS is discussed. It is pointed out that access to the PCDS could occur via general purpose computer-to-computer communications providing remote log on to the system. The UNIDATA System could also be used to transfer information from the PCDS, provided the appropriate software is available to receive the data. Both of these scenarios require agreements on the access protocols and appropriate physical connections. Universities' needs for weather information on a near real-time basis, and UNIDATA has already established a satellite broadcast data service for this purpose.

Fulker, D. W.↗

NASA NTRS1986

Closed-loop, pilot/vehicle analysis of the approach and landing task

In the case of approach and landing, it is universally accepted that the pilot uses more than one vehicle response, or output, to close his control loops. Therefore, to model this task, a multi-loop analysis technique is required. The analysis problem has been in obtaining reasonable analytic estimates of the describing functions representing the pilot's loop compensation. Once these pilot describing functions are obtained, appropriate performance and workload metrics must then be developed for the landing task. The optimal control approach provides a powerful technique for obtaining the necessary describing functions, once the appropriate task objective is defined in terms of a quadratic objective function. An approach is presented through the use of a simple, reasonable objective function and model-based metrics to evaluate loop performance and pilot workload. The results of an analysis of the LAHOS (Landing and Approach of Higher Order Systems) study performed by R.E. Smith is also presented.

Anderson, M. R.↗

NASA NTRS1985

Thermal stability of static coronal loops. I - Effects of boundary conditions

Antiochos, S. K.↗

NASA NTRS1985

Inhibition of conductive heat flow by magnetic constriction in the corona and transition region - Dependence on the shape of the constriction

Attention is given to the process by which the shape of the constriction of field lines inhibiting the conduction of heat down from the corona acts in conjunction with the degree of constriction to inhibit the heat flow. The analytical model for the heat flow involves tapered flux tubes in which the plasma properties are constant on cross sections, while the plasma is static and the only energy transfer is by thermal conduction. It is determined that only two specific solutions to the model are applicable to the solar atmosphere: the steady state, which is appropriate for quiet regions and for active ones that are not flaring, and the time-dependent case, in which no heat enters the hot end, which is appropriate for conductive cooling of flare loops.

Moore, R. L.↗

NASA NTRS1986

Controlling and monitoring the space-station plasma interaction: A baseline for performing plasma experiments and using advanced technology

The size, complexity, and motion of space station through the Earth's environmental plasma means that there will be a large, complicated interaction region, involving a sheath, wake, charging of surfaces, induced electric fields, secondary emission, outgassing with ionization, etc. This interaction will necessarily be a factor in carrying out and interpreting plasma experiments and in the use of certain technologies. Attention should be given ahead of time to: (1) monitoring this interaction so that it is well described; (2) implifying the interaction by appropriate design and construction of the spacecraft and by appropriate planning of technology use; and (3) controlling the interaction by both active and passive means. Plasma emitters for modifying and controlling the spacecraft charge should be placed in several locations. Portable electrostatic shields could be deployed around noisy sections of the spacecraft in order to carry out sensitive experiments. A particle umbrella could be raised to deflect the ram ions and neutrals in order to provide a controlled environment. These interactions are briefly discussed.

Whipple, Elden C.↗