Search NASA⌕ Search

SEARCH · Search NASA

Results for “Accelerometers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Shake Test Results and Dynamic Characterization of the Large Rotor Test Apparatus in the NFAC 40- by 80-Foot Wind Tunnel

Prior to the full-scale wind tunnel test of the UH-60A Airloads rotor, a shake test was completed on the Large Rotor Test Apparatus. The goal of the shake test was to characterize the oscillatory response of the test rig and provide a dynamic calibration of the balance to permit accurate measurement of vibratory hub loads. This paper provides a summary of the shake test results, including balance, shaft bending gauge, and accelerometer measurements. Sensitivity to hub mass and angle of attack were investigated during the shake test. Hub mass was found to have an important impact on the vibratory forces and moments measured at the balance, especially near the UH-60A 4/rev frequency. Comparisons were made between the accelerometer data and an existing finite-element model, showing agreement on mode shapes, but not on natural frequencies. The results suggest that the shake test data can be used to correct in-plane loads measurements up to 10 Hz and normal loads up to 30 Hz.

Shake Test↗
NASA NTRS2019

Gravitational Changes of the Earth's Free Oscillation From Earthquakes: Theory and Feasibility Study Using GRACE Inter‐Satellite Tracking

GRACE satellites have detected regional‐scale preseismic, coseismic, and postseismic gravity changes associated with great earthquakes during the GRACE era (2002‐2017). Earthquakes also excite global‐scale transient gravity changes associated with free oscillations that may be discerned for a few days. In this study, we examine such global gravity changes due to Earth's free oscillations and quantify how they affect GRACE measurements. We employ the normal mode formalism to synthesize the global gravity changes after the 2004 Sumatra earthquake and simulate the (gravitational) free oscillation signals manifested in the GRACE K‐band ranging (KBR) measurements. Using the Kaula orbit perturbation theory, we show how GRACE inter‐satellite distances are perturbed through a complex coupling of eigenfrequencies of the normal modes with the Earth's rotation rate and the GRACE satellites' orbital frequency. It is found that a few gravest normal modes can generate range‐rate perturbations as large as 0.2 μm/s, which are comparable to actual errors of GRACE KBR ranging and accelerometer instruments. Wavelet time‐frequency analysis of the GRACE KBR residual data in December 2004 reveals the existence of a significant transient signal after the 2004 Sumatra earthquake. This transient signal is characterized by a frequency of ~0.022 mHz that could be potentially associated with the largest excitation due to the “football” mode of the Earth's free oscillation. However, the results are also affected by low‐frequency noise of the GRACE accelerometers. Improved space‐borne gravitational instrumentation may open new opportunities to study the Earth's interior and earthquakes independently from global seismological analysis.

Ghobadi-Far, Khosro↗
NASA NTRS2019

Photogrammetry-Based Analysis of the On-Orbit Structural Dynamics of the Roll-Out Solar Array

The Roll-Out Solar Array (ROSA) flight experiment was launched to the International Space Station (ISS) on June 3rd, 2017. ROSA is an innovative, lightweight solar array with a flexible substrate that makes use of the stored strain energy in its composite structural members to provide deployment without the use of motors. This paper will discuss the results of various structural dynamics experiments conducted on the ISS during the weeks following launch. Data gathered from instrumentation on the solar array wing during the experiments was previously compared with pre-flight predictions from two different Finite Element Modeling (FEM) efforts. In this paper, data generated from photogrammetry is compared with accelerometer data and used to extend previous conclusions. Whereas previous analyses were only able to track the accelerations of six discrete points on the structure and photovoltaic (PV) blanket of ROSA, the photogrammetry analysis makes available displacements for dozens of points distributed throughout the array. This larger data set makes it possible to compare higher-order PV blanket modes with FEM predictions, in addition to verifying conclusions reached using accelerometer data. The goal in this effort was to better understand the performance of ROSA and to improve modeling efforts for future designs of similar solar arrays.

Chamberlain, Matthew K.↗
NASA NTRS2018

Cryogenic Angle Measurement at NASA Langley

NASA’s National Transonic Facility is one of the few cryogenic wind-tunnel facilities in the world, where tunnel conditions may reach -250 F. Model angle of attack (AoA) at NTF is typically measured by an on-board accelerometer package that is exposed to the cryogenic tunnel conditions. These NTF AoA packages house two Q-Flex accelerometers in a compact heated environment in order to maintain constant temperature of the sensors for stability. Recently, drift in sensor output was observed in one of the NTF AoA packages. The drift is correlated with the AoA package temperature and cryogenic soak time. This paper studies the temperature and time dependent behavior of the NTF AoA packages, and reviews their design and calibration. Recommended improvements to the AoA packages are made to improve the stability of the model angle of attack measurements at cryogenic conditions.

Toro, Kenneth G.↗
NASA NTRS2022

Novel Crash Sled with a Translating Support Mass

Background: A novel crash sled has been developed with a translating support, incorporating transducers that allow multiple methods of measuring energy absorption to fully characterize the dynamic crush response of composite components. Objective: The main goal of the current investigation was to demonstrate functionality, repeatability, and accuracy of crush testing using a crash sled with a translating support mass. Methods: A semi-automated algorithm for data reduction was developed based on impact mechanics principles. A preliminary set of tests was initially conducted using aluminum honeycomb specimens with a specified stable crushing force to quantify the accuracy and repeatability of the crush data. Following the success of these tests, triaxially-braided fiber-reinforced polymer (FRP) specimens were evaluated. Results: Crush tests with the aluminum honeycomb specimens showed excellent outcomes for all three specimens. These data provided close agreement with cumulative energy absorption between individual instruments and stable crushing forces at expected values. For the FRP specimens, specific energy absorption (SEA) and force-displacement curves were successfully measured; however, data from the translating support mass accelerometer was excluded from the dataset due to clipping. The SEA of the corrugated specimens was greater than the SEA for the C-channel specimens at both test speeds. Conclusions: The crash sled functionality was verified, the specimen geometry was found to contribute more to SEA than the impact speed in the speed range tested, and the support mass accelerometer will be upgraded to prevent clipping in future tests.

Dynamic Crush↗
NASA NTRS2020

Maximum Correntropy Kalman Filter for Orientation Estimation with Application to LiDAR Inertial Odometry

Robot navigation is a prerequisite to enable many autonomous robotic operations. Propioceptive inertial measurement units (IMUs) are widely used and commonly accepted sensing devices in robotic navigation. An IMU typically consists of two-triaxis sensors: an accelerometer and a gyroscope (gyro), measuring the accelerations (accelerated motion together with gravity) and angular velocities of the sensor, respectively. In addition, some IMUs incorporate a magnetic angular rate sensor, which is a triaxis magnetometer measuring the magnetic field of the Earth. In this work, we focus on these types of IMUs (comprised of accelerometer, gyro and magnetometer).

Agha-mohammadi, Ali-akbar↗
NASA NTRSDate not supplied

Results from Two Full-Scale Hawker 4000 Fuselage Drop Tests

In the spring of 2022, NASA Langley Research Center (LaRC) conducted two full-scale drop tests on a Hawker 4000 partial fuselage structure for the evaluation of composite material response under dynamic impact loading conditions. The specific objectives of the tests were to induce dynamic composite damage initiation and progression and in primary structure and to understand the nature of the failure modes. The tests were conducted via dividing the fuselage hardware into three smaller sections. Dynamic drop tests were conducted on the forward and aft portions of the fuselage under different dynamic loading conditions, while the middle section was reserved for materials testing. Both tests were conducted by dropping the test articles from a height of 14 feet with significant amounts of pitch, which was added to initiate damage in specific regions of the structure. The test articles were ballasted then instrumented with accelerometers at various locations and speckle-coated on both exterior sides with a black and white stochastic pattern for use with three-dimensional digital image correlation (3D-DIC). In addition, the interior belly portion of the forward section test article was also speckle-coated, which was intended to capture deformations on the belly of the test article from the interior at impact. The interior of the aft section test article was not speckle-coated. Prior to testing, bow-tie markers were applied at various locations for use in marker tracking, to measure impact conditions such as vertical impact velocity and pitch. In this report, a partial summary of the data collected from the tests is presented. The data was primarily in the form of accelerometers to measure impact acceleration and 3D-DIC to measure deformation and failure onset and propagation. Post-test inspections revealed the primary damage mechanism was fiber cracking and delamination primarily in and around the area that contacted the impact surface. Acceleration pulse shapesin the ballast locations were trapezoidal in nature and ranged between 10 g and 40 g, depending on the location and test.

full scale testing↗
NASA NTRSDate not supplied

Results from Two Full-Scale Hawker 4000 Fuselage Drop Tests

In the spring of 2022, NASA Langley Research Center (LaRC) conducted two full-scale drop tests on a Hawker 4000 partial fuselage structure for the evaluation of composite material response under dynamic impact loading conditions. The specific objectives of the tests were to induce dynamic composite damage initiation and progression and in primary structure and to understand the nature of the failure modes. The tests were conducted via dividing the fuselage hardware into three smaller sections. Dynamic drop tests were conducted on the forward and aft portions of the fuselage under different dynamic loading conditions, while the middle section was reserved for materials testing. Both tests were conducted by dropping the test articles from a height of 14 feet with significant amounts of pitch, which was added to initiate damage in specific regions of the structure. The test articles were ballasted then instrumented with accelerometers at various locations and speckle-coated on both exterior sides with a black and white stochastic pattern for use with three-dimensional digital image correlation (3D-DIC). In addition, the interior belly portion of the forward section test article was also speckle-coated, which was intended to capture deformations on the belly of the test article from the interior at impact. The interior of the aft section test article was not speckle-coated. Prior to testing, bow-tie markers were applied at various locations for use in marker tracking, to measure impact conditions such as vertical impact velocity and pitch. In this report, a partial summary of the data collected from the tests is presented. The data was primarily in the form of accelerometers to measure impact acceleration and 3D-DIC to measure deformation and failure onset and propagation. Post-test inspections revealed the primary damage mechanism was fiber cracking and delamination primarily in and around the area that contacted the impact surface. Acceleration pulse shapesin the ballast locations were trapezoidal in nature and ranged between 10 g and 40 g, depending on the location and test.

full scale testing↗
NASA NTRSDate not supplied

Integrated Modal Test of the Artmis I Launch Vehicle

The dynamic testing campaign for the Artemis I launch vehicle culminated in the Integrated Modal Test (IMT). The IMT consisted of the Space Launch System with a mass simulator of Orion (MSO) on top of the SLS stack, which rested on the deck of the mobile launcher (ML) and mount mechanisms. The modal testing met the goal to capture a set of target modes under 7Hz, in two test configurations, using 298 accelerometer locations and 472 accelerometer channels. Overall the model of the test matched very well with the data without tuning the model with the exception of the first torsion mode, which was measured at a much lower frequency than predicted at when excited at higher levels.

Dan Lazor↗
NASA NTRS2005

UH-60A Airloads Catalog

As a part of the NASA-Army UH-60A Airloads Program, instrumented rotor blades were designed and built for the UH-60A helicopter that included 241 pressure transducers on one blade and a suite of strain gauges and accelerometers on a second blade. These blades were then installed on a UH-60A at NASA Ames Research Center and a special purpose data acquisition system was designed and built to acquire the rotating system measurements. The aircraft was also instrumented with conventional aircraft state measurements as well as a suite of fuselage accelerometers. Test flights of the highly-instrumented UH-60A were flown from August 1993 to February 1994 and an extensive data base was acquired. A total of 31 research flights were made with the majority of the flights flown out of Moffett Field, California. The test data, in general, were acquired in isolated airspace over the San Joaquin Valley. An exception to this procedure is that nine flights were made in cooperation with NASA Langley Research Center, and for these tests the aircraft was flown out of the Modesto airport and the data were acquired at the Crows Landing Naval Auxiliary Air Field, also within the San Joaquin Valley. Over 900 different test conditions, or counters, were recorded, processed, and stored in an electronic data base as a part of this test program. The electronic data base, currently at NASA Ames Research Center, includes approximately 30 GBytes of data obtained from the test program. This Technical Memorandum summarizes the kinds of data that are in the data base to assist interested users. Each set of test conditions is presented in a table which contains a unique identifying number that is termed the counter number, the written description of the counter that is within the database, and the duration of the counter in seconds. Within each table the counters are listed in chronological order, and in some cases counters may be included within two or more tables if they meet different criteria.

UH-60A↗
NASA NTRS1995

Acceleration Measurement Comparison Program Report

Results are described for a comparison of accelerometer calibrations being performed at NASA laboratories between May 1994 and March 1995. A compilation was made of transfer standard frequency measurements and 100 Hz pick-up sensitivity measurements.

accelerometers accelerometer calibration↗
DOE OSTI2024

EGS Collab Experiment 2: Microseismic Monitoring

This dataset contains continuous seismic waveform data recorded during stimulation and thermal circulation tests for the Enhanced Geothermal Systems (EGS) Collab Experiment #2, conducted from February to September 2022 at the Sanford Underground Research Facility in Lead, South Dakota. This experiment aimed to study and validate models of geothermal systems by injecting high-pressure fluids into rock formations 1200-1500 meters below the surface, inducing microseismic events. The seismic monitoring system included 16 three-component accelerometers and a 24-channel hydrophone array, installed in boreholes surrounding the test area. Data were recorded at high sampling rates using a continuous waveform recording system to monitor seismic activity in real time. The dataset contains the raw data stored in binary format, with files named based on timestamps, and includes calibration certificates for some sensors to facilitate corrections to real units. Users are strongly advised to consult the accompanying detailed report, which outlines the experimental setup, sensor specifications, installation procedures, and data processing methods. The report also describes important nuances, such as the hardware filters on hydrophones, sensor calibration details, and the naming conventions for the recorded data. Proper use of this dataset may require familiarity with seismic data analysis tools, such as the Obspy Python package, and an understanding of the SEED naming conventions used for channel identification.

15 GEOTHERMAL ENERGY↗