SEARCH · Search NASA

Results for “Acoustic modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1996

Computational approaches to computational aero-acoustics

The various techniques by which the goal of computational aeroacoustics (the calculation and noise prediction of a fluctuating fluid flow) may be achieved are reviewed. The governing equations for compressible fluid flow are presented. The direct numerical simulation approach is shown to be computationally intensive for high Reynolds number viscous flows. Therefore, other approaches, such as the acoustic analogy, vortex models and various perturbation techniques that aim to break the analysis into a viscous part and an acoustic part are presented. The choice of the approach is shown to be problem dependent.

Hardin, Jay C.↗

NASA NTRS1973

Aspects of investigating STOL noise using large-scale wind-tunnel models.

The applicability of the NASA Ames 40- by 80-foot wind tunnel for acoustic research on STOL concepts has been investigated. The acoustic characteristics of the wind-tunnel test section have been studied with calibrated acoustic sources. Acoustic characteristics of several large-scale STOL models have been studied in both the free-field and wind-tunnel acoustic environments. The results of these studies indicate that the acoustic characteristics of large-scale STOL models can be measured in the wind tunnel if the test section acoustic environment and model acoustic similitude are taken into consideration. The reverberant field of the test section must be determined with an acoustically similar noise source. A directional microphone, a phased array of microphones, and extrapolation of near-field data to far-field are some of the techniques being explored as possible solutions to the directivity loss in a reverberant field. The model sound pressure levels must be of sufficient magnitude to be distinguishible from the wind-tunnel background noise.

Falarski, M. D.↗

NASA NTRS1977

Over-the-wing model thrust reverser noise tests

Static acoustic tests were conducted on a 1/12 scale model over-the-wing target type thrust reverser. The model configuration simulates a design that is applicable to the over-the-wing short-haul advanced technology engine. Aerodynamic screening tests of a variety of reverser designs identified configurations that satisfied a reverse thrust requirement of 35 percent of forward thrust at a nozzle pressure ratio of 1.29. The variations in the reverser configuration included, blocker door angle, blocker door lip angle and shape, and side skirt shape. Acoustic data are presented and compared for the various configurations. The model data scaled to a single full size engine show that peak free field perceived noise (PN) levels at a 152.4 meter sideline distance range from 98 to 104 PNdb.

Goodykoontz, J.↗

NASA NTRS1990

Noise of a simulated installed model counterrotation propeller at angle-of-attack and takeoff/approach conditions

Acoustic results for two model counterrotation propellers are presented. The propellers were tested over a range of rotational speeds and propeller axis angles of attack in both the baseline configuration and the installed configuration consisting of a simulated upstream nacelle support pylon and fuselage section. Acoustic data were taken with a polar microphone probe attached to the downstream propeller housing, capable of surveying directivities at several azimuthal locations. The forward and aft rotor power coefficients and fundamental rotor-alone tone levels are found to be directly controlled by propeller axis angle of attack. The second-order rotor-alone tones are strongly influenced by the upstream pylon wake at 80 percent speed; however, rotor-alone mechanisms control the tone level at 90 percent speed, while rotor-rotor interaction tones are essentially unaffected by the presence of the simulated installation.

Woodward, Richard P.↗

NASA NTRS1997

Novel Multidisciplinary Models Assess the Capabilities of Smart Structures to Manage Vibration, Sound, and Thermal Distortion in Aeropropulsion Components

The development of aeropropulsion components that incorporate "smart" composite laminates with embedded piezoelectric actuators and sensors is expected to ameliorate critical problems in advanced aircraft engines related to vibration, noise emission, and thermal stability. To facilitate the analytical needs of this effort, the NASA Lewis Research Center has developed mechanics and multidisciplinary computational models to analyze the complicated electromechanical behavior of realistic smart-structure configurations operating in combined mechanical, thermal, and acoustic environments. The models have been developed to accommodate the particular geometries, environments, and technical challenges encountered in advanced aircraft engines, yet their unique analytical features are expected to facilitate application of this new technology in a variety of commercial applications.

Saravanos, Dimitris A.↗

NASA NTRSDate not supplied

Perforate Sheet Concepts for Improved Low-Frequency Absorption of Acoustic Liners

Two perforate sheet concepts are presented that attempt to improve the lower frequency absorption characteristics of acoustic liners: hole-clustered facesheet and bent-perforation-path facesheet. The theory behind each will be discussed, and normal incidence experimental data will also be shown to demonstrate acoustic benefits. Preliminary modeling efforts are in work and will be discussed as well.

acoustic liner perforate sheet low frequency absor↗

NASA NTRS1979

Acoustic behavior of a fibrous bulk material

A semiempirical model is presented describing the acoustic behavior of Kevlar 29, a bulk absorbing material. The model is based on an approximate solution to the one-dimensional equations representing conservation of fluctuating mass, momentum and energy. By treating the material as a momentum sink, theoretical expressions of the material complex propagation constants and characteristic impedance were derived in terms of a single constant. Evaluating the constant at a single frequency for a particular specimen, excellent agreement between prediction and measurement was achieved for a large range of sound frequencies and material porosities and thicknesses. Results show that Kevlar 29 absorbs sound efficiently even at low frequencies. This is explained in terms of a frequency dependent material phase speed.

Hersh, A. S.↗

NASA NTRS1992

Noise of two high-speed model counter-rotation propellers at takeoff/approach conditions

This paper presents acoustic results for two model counter-rotation propellers which were tested in the NASA Lewis 9- x 15-ft Anechoic Wind Tunnel. The propellers had a common forward rotor, but the diameter of the aft rotor of the second propeller was reduced in an effort to reduce its interaction with the forward rotor tip vortex. The propellers were tested at Mach 0.20, which is representative of takeoff/approach operation. Acoustic results are presented for these propellers which show the effect of rotor spacing, reduced aft rotor diameter, operation at angle-of-attack, blade loading, and blade number. Limited aerodynamic results are also presented to establish the propeller operating conditions.

Woodward, Richard P.↗

NASA NTRS1983

Spinning mode acoustic radiation from the flight inlet

A mathematical model was developed for spinning mode acoustic radiation from a thick wall duct without flow. This model is based on a series of experiments (with and without flow). A nearly pure azimuthal spinning mode was isolated and then reflection coefficients and far field pressure (amplitude and phase) were measured. In our model the governing boundary value problem for the Helmholtz equation is first converted into an integral equation for the unknown acoustic pressure over a disk, S1, near the mouth of the duct and over the exterior surface, S2, of the duct. Assuming a pure azimuthal mode excitation, the azimuthal dependence is integrated out which yields an integral equation over the generator C1 of S1 and the generator C2 of S2. The sound pressure on C1 was approximated by a truncated modal expansion of the interior acoustic pressure. Piecewise linear spline approximation on C2 was used.

Moss, W. F.↗

NASA NTRS2008

Analytical Model of the Nonlinear Dynamics of Cantilever Tip-Sample Surface Interactions for Various Acoustic-Atomic Force Microscopies

A comprehensive analytical model of the interaction of the cantilever tip of the atomic force microscope (AFM) with the sample surface is developed that accounts for the nonlinearity of the tip-surface interaction force. The interaction is modeled as a nonlinear spring coupled at opposite ends to linear springs representing cantilever and sample surface oscillators. The model leads to a pair of coupled nonlinear differential equations that are solved analytically using a standard iteration procedure. Solutions are obtained for the phase and amplitude signals generated by various acoustic-atomic force microscope (A-AFM) techniques including force modulation microscopy, atomic force acoustic microscopy, ultrasonic force microscopy, heterodyne force microscopy, resonant difference-frequency atomic force ultrasonic microscopy (RDF-AFUM), and the commonly used intermittent contact mode (TappingMode) generally available on AFMs. The solutions are used to obtain a quantitative measure of image contrast resulting from variations in the Young modulus of the sample for the amplitude and phase images generated by the A-AFM techniques. Application of the model to RDF-AFUM and intermittent soft contact phase images of LaRC-cp2 polyimide polymer is discussed. The model predicts variations in the Young modulus of the material of 24 percent from the RDF-AFUM image and 18 percent from the intermittent soft contact image. Both predictions are in good agreement with the literature value of 21 percent obtained from independent, macroscopic measurements of sheet polymer material.

Cantrell, John H., Jr.↗

NASA NTRS1991

Microstress contrast in scanning electron acoustic microscopy of ceramics

A mathematical model of image contrast in scanning electron acoustic microscopy (SEAM) due to the effect of residual stresses in materials is presented. It is found that in regions near the ends of the radial cracks induced by Vickers indentation the SEAM micrographs reveal a rather large variation of the acoustic output signal.

Cantrell, John H.↗

NASA NTRSDate not supplied

Influence of the Perception Constraint, Installation Effects, and Broadband SelfNoise on Low-Fidelity, Multi-point, UAM Vehicle Perception-Influenced-Design(PID) Optimization

UAM vehicles represent a unique challenge in acoustics because there are a limited number of full-scale datasets that can be used to calibrate and validate prediction models. In addition, acoustics is considered more often in the early design loop as a higher priority concern in UAM vehicle design, whereas with traditional vehicles, acoustics is typically addressed with post-design constraints. This paper will present an approach in design optimization of a proprotor in two flight conditions, hover, and forward flight, with several acoustic objective functions that simulate community response. An adjoint-capable vortex-lattice method (VLM), implemented in VSPAERO, will be used to compute the blade forces and inflow properties required to compute tonal and broadband noise using the second-generation Aircraft NOise Prediction Program (ANOPP2). In addition, a wing is placed near the proprotor to simulate installation effects on a vehicle’s wing. The influence of rotation rate, chord distribution, twist angle, and sweep on installation, broadband noise, and choice of perception constraint from the design optimization will be shown.

acoustics↗

NASA NTRSDate not supplied

A Machine Learning Ready Dataset of Acoustic Power Maps for Detection of Active Region Emergence

The development of an accurate forecast for solar eruptive activity has become increasingly important in order to prevent any potential impact on activities in space and the Earth's environment. It is therefore crucial to detect active regions before they appear on the solar surface and create early warning capabilities for upcoming Space Weather disturbances. In this work, 9TB of solar data (SDO/HMI dopplergrams, magnetograms and continuum intensity maps) involving the emergence of 61 NOAA solar active regions since 2010 were processed using the NASA HECC capabilities. An acoustic power maps time-series dataset was created (for four different frequency ranges and processed to take into account the solar sphere geometric effect ) which can be used for understanding the dynamics of the solar surface and train a variety of ML models. The calculated acoustic power maps carry precursor information associated with the decrease in continuum intensity on the solar surface, verifying older helioseismology research. Our results show that a Long Short-Term Memory (LSTMs) model, with a modest layer depth and the right hyperparameters tuned, when trained on this solar acoustic power maps dataset can predict without false negatives a drop in intensity (associated with the emergence of the active region), up to 18 hours in advance.

SMD↗

NASA NTRS1990

Flow and acoustic properties of low Reynolds number underexpanded supersonic jets

An experimental program to investigate the flow and acoustic properties of model underexpanded supersonic jets was conducted. In particular, the role played by large-scale organized fluctuations in the flow evolution and acoustic production processes was examined in detail. The experimental conditions were chosen as low-Reynolds-number (Re = 8000) Mach 1.4 and 2.1 underexpanded jets exhausting from convergent nozzles. A consequence of performing the experiments at low Reynolds number is that the broadband shock-associated noise is suppressed. The focus of the present study is on the generation of noise by large-scale instabilities in the presence of strong shock cell structures. It is demonstrated that the production of screech is related to the modulation and decay of large-scale turbulence structures.

Hu, Tieh-Feng↗

NASA NTRS1984

Analysis of the effect on combustor noise measurements of acoustic waves reflected by the turbine and combustor inlet

Spectral analyses of static pressure fluctuations measured in turbine engine combustors at low engine speed show good agreement with theory. At idle speed the high pressure turbine is unchoked. Above idle speed the turbine chokes and a significant change in the shape of the measured combustor pressure spectrum is observed. A simplified theoretical model of the acoustic pressure generated in the combustor due to the turbulence-flame front interaction did not account for acoustic waves reflected from the turbine. By retaining this simplified combustion noise source model and adding a partial reflecting plane at the turbine and combustor inlet, a simple theoretical model was developed that reproduces the undulations in the combustor fluctuating pressure spectra. Plots of the theoretical combustor fluctuating pressure spectra are compared to the measured pressure spectra obtained from the CF6-50 turbofan engine over a range of engine operating speeds. The simplified combustion noise theory when modified by a simple turbine reflecting plane adequately accounts for the changes in measured combustor pressure spectra. It is further concluded that the shape of the pressure spectra downstream of the turbine, neglecting noise generated by the turbine itself, will be the combustion noise spectra unchanged except for the level reduction due to the energy blocked by the turbine.

Huff, R. G.↗

NASA NTRS1984

Analysis of the effect on combustor noise measurements of acoustic waves reflected by the turbine and combustor inlet

Huff, R. G.↗

NASA NTRS1976

Semi-empirical airframe noise prediction model

A semi-empirical maximum overall sound pressure level (OASPL) airframe noise model was derived. The noise radiated from aircraft wings and flaps was modeled by using the trailing-edge diffracted quadrupole sound theory derived by Ffowcs Williams and Hall. The noise radiated from the landing gear was modeled by using the acoustic dipole sound theory derived by Curle. The model was successfully correlated with maximum OASPL flyover noise measurements obtained at the NASA Dryden Flight Research Center for three jet aircraft - the Lockheed JetStar, the Convair 990, and the Boeing 747 aircraft.

Hersh, A. S.↗

NASA NTRS1990

A noise assessment and prediction system

A system has been designed to provide an assessment of noise levels that result from testing activities at Aberdeen Proving Ground, Md. The system receives meteorological data from surface stations and an upper air sounding system. The data from these systems are sent to a meteorological model, which provides forecasting conditions for up to three hours from the test time. The meteorological data are then used as input into an acoustic ray trace model which projects sound level contours onto a two-dimensional display of the surrounding area. This information is sent to the meteorological office for verification, as well as the range control office, and the environmental office. To evaluate the noise level predictions, a series of microphones are located off the reservation to receive the sound and transmit this information back to the central display unit. The computer models are modular allowing for a variety of models to be utilized and tested to achieve the best agreement with data. This technique of prediction and model validation will be used to improve the noise assessment system.

Olsen, Robert O.↗