Search NASA⌕ Search

SEARCH · Search NASA

Results for “Apollo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Where No Man Has Gone Before: A History of Apollo Lunar Exploration Missions

This book is a narrative account of the development of the science program for the Apollo lunar landing missions. It focuses on the interaction between scientific interests and operational considerations in such matters as landing site selection and training of crews, quarantine and back contamination control, and presentation of results from scientific investigations. Scientific exploration of the moon on later flights, Apollo 12 through Apollo 17 is emphasized.

Compton, William David↗
NASA NTRS1988

Highland materials at Apollo 17 - Contributions from 72275

A set of Apollo 17 feldspathic highland clasts from polymict breccia 72275 have been studied. The clasts include six granulites and a rare Apollo 17 ferroan anorthosite (FAN). The composition of these clasts is discussed in detail. It is suggested that there are three possibilities regarding the petrogenesis of Apollo 17 FAN: (1) the rocks are products of late-stage crystallization from their parent magma, (2) the rocks solidified with a high amount of trapped liquid relative to FANs from other sites, or (3) the highlands rocks that formed at this site crystallized from a parent magma with a composition distinct from that of other lunar highland sites.

Salpas, Peter A.↗
NASA NTRS1988

Apennine Front revisited - Diversity of Apollo 15 highland rock types

The Apollo 15 landing site is geologically the most complex of the Apollo sites, situated at a mare-highland interface within the rings of two of the last major basin-forming impacts. Few of the Apollo 15 samples are ancient highland rocks derived from the early differentiation of the moon, or impact melts from major basin impacts. Most of the samples are regolith breccias containing abundant clasts of younger volcanic mare and KREEP basalts. The early geologic evolution of the region can be understood only by examining the small fragments of highland rocks found in regolith breccias and soils. Geochemical and petrologic studies of clasts and matrices of three impact melt breccias and four regolith breccias are presented. Twelve igneous and metamorphic rocks show extreme diversity and include a new type of ferroan norite. Twenty-five samples of highland impact melt are divided into groups based on composition. These impact melts form nearly a continuum over more than an order of magnitude in REE concentrations. This continuum may result from both major basin impacts and younger local events. Highland rocks from the Apennine Front include most of the highland rock types found at all of the other sites. An extreme diversity of highland rocks is a fundamental characteristic of the Apennine Front and is a natural result of its complex geologic evolution.

Lindstrom, Marilyn M.↗
NASA NTRS1988

Apollo 15 yellow-brown volcanic glass - Chemistry and petrogenetic relations to green volcanic glass and olivine-normative mare basalts

Electron microprobe and INAA were used to analyze forty spherules of Apollo 15 yellow-brown glass for major and trace elements. The glass is one of twenty-five high-Mg primary magmas emplaced on the lunar surface in pyroclastic eruptions. The abundances show that the magma was produced by partial melting of differentiated cumulates in the lunar mantle. Models to explain the possible source-regions of several Apollo 15 and Apollo 12 low-Ti mare magmas are presented.

Hughes, S. S.↗
NASA NTRS1989

Cratering of the terrestrial planets by Apollo objects

An asteroidal collision model and Monte Carlo program used for studies of the terrestrial meteorite flux, the steady-state number of Apollo-Amor objects, and the orbital distribution of both meteorites and Apollo-Amor objects is used to calculate absolute and relative cratering rates on the terrestrial planets. It is found that the 'best' estimates of the predicted asteroidal cratering rate are three times lower than estimates of the observed terrestrial cratering rate. If this is due to errors in the asteroidal production rate of Apollo-Amor objects, the predicted present-day cratering rate per unit area on Mars is four times that on earth, whereas that on Mercury is twice that on earth.

Wetherill, G. W.↗
NASA NTRS1990

Environmental projects, volume 10. Environmental assessment: New 34-meter antenna at Apollo site

The Goldstone Deep Space Communications Complex (GDSCC) is part of NASA's Deep Space Network (DSN), one of the world's largest and most sensitive scientific telecommunications and radio navigation networks. A detailed description of the GDSCC is presented. At present the Venus Station has an unused 9-meter antenna and a 26-meter (85 ft) antenna known as DSS-13. Construction of a new 34-meter (111.5 ft) antenna at the Venus site is under way to replace the present DSS-13 26-meter antenna. The proposed construction at the Apollo Site of a new, high efficiency, 34-meter, multifrequency beam waveguide-type antenna to replace the aging, 20-year old, DSS-12 34-meter antenna located at the Echo Site is analyzed. This new 34-meter antenna, to be constructed at the Apollo Site and to be known as DSS-18, will be of a design similar to the new DSS-13 34-meter antenna now being constructed at the Venus Site. When the new 34-meter antenna is completed and operational at the Apollo Site (planned for 1993), the old DSS-12 34-meter antenna at the Echo Site will be decommissioned, dismantled, and removed.

Source record↗
NASA NTRS1990

Modeling of lunar basalt petrogenesis - Sr isotope evidence from Apollo 14 high-alumina basalts

This paper reexamines the Sr isotope data available for the Apollo 14 high-alumina basalts in light of the assimilation and fractional crystallization (AFC) process model proposed by Neal et al. (1987, 1988, 1989). Positive linear correlations of Sr-87/Sr-86 with Rb-87/Rb-86 and the Sr abundance (both leading to KREEP) are used as evidence of such an AFC process in the petrogenesis of Apollo 14 high-alumina basalts. The existing Sr isotope data for Apollo 14 high-alumina basalts suggest that there were three AFC cycles.

Neal, C. R.↗
NASA NTRS1990

The significance of fractional crystallization in the petrogenesis of Apollo 17 Type A and B high-Ti basalts

Whole-rock and mineral analyses of 26 'new' type A and B Apollo 17 basalts are reported. The petrography and mineral chemistry of these basalts are similar to previously reported Apollo 17 basalts. However, these 'new' whole-rock data extend the compositional ranges of previously reported type A and B basalts and require the division of the type B basalts into type B1 and B2 varieties. These three types display similar trends when both major and trace elements are plotted against a fractionation index of Cr/La ratio. Major element compositions of basalts from all three types fall on olivine + Ti oxide control lines. This study demonstrates that Apollo 17 type A, B1, and B2 basalts have a relatively simple petrogenesis, with the only postmagma-generation process being fractional crystallization.

Neal, Clive R.↗
NASA NTRS1990

A distinct variant of high-titanium mare basalt from the Van Serg core, Apollo 17 landing site

A fragment of basalt picked from the drive tube collected at Van Serg crater at the Apollo 17 landing site has a bulk chemistry more primitive than that of other high-titanium mare basalt groups collected at the site. The sample has a fine-grained olivine phyric, subophitic texture that is distinct from that of other high-titanium basalt samples. The grain size and texture suggest that the sample has a composition close to that of a magma. The crystallization sequence, with appearance of oxide minerals later than in other groups, and other petrographic features such as more-calcic plagioclase and early pigeonite rather than augite, are consistent with this sample representing a distinct variant of Apollo 17 high-titanium basalts. It is not related through closed-system igneous processes to any of the other mare basalt groups identified among Apollo 17 samples. Its characters emphasize the complexity of contemporaneous magma processes on the moon and the heterogeneity of that part of the mantle that was melted.

Ryder, Graham↗
NASA NTRS1992

neoKREEP: A new lunar component at Apollo 17

The Apollo 11 (Mare Tranquillitatis) and Apollo 17 (Mare Serenitatis) landing sites are important as the only sources of high-Ti basalt visited by the Apollo missions. The lunar high-Ti basalts (greater than 6 percent TiO2) have no volumetrically comparable analogs among terrestrial basalts and require the presence of ilmenite in the source region, probably representing cumulates produced late in the crystallization of the lunar magma ocean. Six principal groups of high-Ti basalts are described, three from each of the two sites.

Jerde, Eric A.↗
NASA NTRS1992

The Apollo 17 regolith

Among Apollo landing sites, Apollo 17 provides the best opportunity to study the efficiency of formation and evolution of regolith by impacts, both large and small. The mare-highlands interface is crucial to this endeavor, but the Light Mantle avalanche and presence of fine-grained pyroclastics offer additional constraints. Compositional variation among soils from different locations and depths provides a means to quantify the extent of mixing by larger impacts. Because of their variety and complex history, Apollo 17 soils have been important in establishing agglutinate abundance, mean grain size, and abundance of fine-grained iron metal (as measured by (I(sub s)/FeO)) as simple index of maturity (relative extent of reworking by micrometeorite impact at the surface). The following topics are discussed: (1) surface soils; (2) cores taken on the mission; (3) gray soil from station 4; (4) components with unknown sources; (5) important points; and (6) future work.

Korotev, Randy L.↗
NASA NTRS1992

Geology of the Apollo 17 site

The Apollo 17 landing site was unique in several aspects: (1) it was the only site that was not selected from telescopic-based geologic interpretation--interest in the site was generated by the visual observations of Al Worden, Apollo 15 Command Module pilot, who interpreted dark-haloed craters as possible cinder cones; (2) instead of 20-m-resolution photographs, as was the norm for all earlier missions, this site had Apollo 15 panoramic camera photography coverage that had 2-m resolution; and (3) it had a geologist-astronaut aboard who was intimately involved in all stages of planning and mission operation, and was also instrumental in the design of a long-handled sample bag holder that eliminated the need for crew to dismount before collecting a sample, which then permitted sampling between major stations. Details of site geology, sample description, and geologic synthesis of the site as viewed from studies through 1976 are summarized.

Muehlberger, W. R.↗
NASA NTRS1992

The Apollo 17 mare basalts: Serenely sampling Taurus-Littrow

As we are all aware, the Apollo 17 mission marked the final manned lunar landing of the Apollo program. The lunar module (LM) landed approximately 0.7 km due east of Camelot Crater in the Taurus-Littrow region on the southwestern edge of Mare Serenitatis. Three extravehicular activities (EVA's) were performed, the first concentrating around the LM and including station 1 approximately 1.1 km south-southeast of the LM at the northwestern edge of Steno Crater. The second traversed approximately 8 km west of the LM to include stations 2, 3, 4, and 5, and the third EVA traversed approximately 4.5 km to the northwest of the LM to include stations 6, 7, 8, and 9. This final manned mission returned the largest quantity of lunar rock samples, 110.5 kg/243.7 lb, and included soils, breccias, highland samples, and mare basalts. This abstract concentrates upon the Apollo 17 mare basalt samples.

Neal, Clive R.↗
NASA NTRS1992

Apollo 17: One giant step toward understanding the tectonic evolution of the Moon

Our present understanding of the tectonic history of the Moon has been shaped in large measure by the Apollo Program, and particularly the Apollo 17 Mission. I attempt to summarize some of the interpretations that have emerged since Apollo 17, focusing on some of the problems and uncertainties that remain to stimulate future exploration of the Moon. The topics covered include: (1) Taurus-Littrow Valley; (2) origin of mare ridges; and (3) nature and timing of tectonic rille formation.

Sharpton, Virgil L.↗
NASA NTRS1988

The Apollo Lightcraft Project

The overall goal for this NASA/USRA-sponsored 'Apollo Lightcraft Project' is to develop a revolutionary launch vehicle technology that can reduce payload transport costs by a factor of 1000 below the Space Shuttle Orbiter. The RPI design team proposes to utilize advanced, highly energetic, beamed-energy sources (laser, microwave) and innovative combined-cycle (airbreathing/rocket) engines to accomplish this goal. This second year focused on systems integration and analysis of the 'Apollo Lightcraft'. This beam-powered, single-stage-to-orbit vehicle is envisioned as the globe-trotting family shuttlecraft of the 21st century. Detailed investigations of the Apollo Lightcraft Project during the second year of study helped evolve the propulsion system design, while focusing on the following areas: (1) man/machine interface; (2) flight control systems; (3) power beaming system architecture; (4) reentry aerodynamics; (5) shroud structural dynamics; and (6) optimal trajectory analysis.

Source record↗
NASA NTRS1967

Report of Apollo 204 Review Board

The Nation's space program requires that man and machine achieve the highest capability to pursue the exploration of space. The Apollo 204 Review Board was charged with the responsibility of reviewing the circumstances surrounding the accident, reporting its findings relating to the cause of the accident, and formulating recommendations so that inherent hazards are reduced to a minimum. The Board is very concerned that its description of the defects in the Apollo Program that led to the condition existing at the time of the Apollo 204 accident will be interpreted as an indictment of the entire manned space flight program and a castigation of the many people associated with that program. This report, rather than presenting a total picture of that program, is concerned with the deficiencies uncovered.

Source record↗
NASA NTRS1966

Apollo Metrology Program

This paper introduces the metrology requirements in the recently published Apollo Program handbook, NHB 5400.2, entitled, 'Apollo Metrology Requirements Manual.' The major elements and control practices required for a comprehensive metrology system are identified. The elements are presented to you with sufficient detail of control practices to provide the scope of a total metrology program. The Manual is for implementation by the Apollo Space Flight Centers, their testing sites and contractors. The benefits of implementing these requirements are equally applicable to any Government or industry standards and calibration laboratory operations.

Porter, W. A.↗
NASA NTRS1993

Origin of the Apollo 15 very low Ti green glass. A perspective from the compositional diversity in the very low Ti glasses

The very low Ti green glasses from the Apollo 15 site have intrigued scientists for over 20 years. Their primitive composition has been used to understand magmatic processes and the structure of the moon. The compositional variability observed in the Apollo 15 glass population has long been a point of debate. Initial studies did not recognize the compositional diversity in the glasses. Stolper et al. documented the major element variability and concluded it could not be produced by magmatic processes and therefore concluded that these glasses must be of impact origin. Subsequent studies confirmed a volcanic origin for the glass population and attempted to elucidate magmatic processes to account for its compositional variability. Models that have been proposed for these glasses include the following: (1) the crystallization of single or multiple phases (olivine, pyroxene, Fe metal, immiscible sulfide); (2) the incompatible behavior of Ni and Co during multiple phase crystallization at extremely low fO2; and (3) magma or source mixing. All of these models have problems. Type (1) models appear not to be consistent with recent trace element studies on the glasses; model (2) is dependent on the debatable incompatible behavior of Ni and Co, and, in models of type (3), the origin and nature of mixing models are somewhat unconstrained. This study compares the Apollo 15 green glasses with the very low Ti picritic glasses from other landing sites.

Shearer, C. K.↗