Search NASA⌕ Search

SEARCH · Search NASA

Results for “Atmospheric Particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Improved representation of black carbon mixing structures suggests stronger direct radiative heating

Black carbon significantly influences the Earth system because of its strong solar radiation absorption. However, its direct radiative effect remains poorly understood in current climate models, partly because current climate models oversimplify the diverse structures formed when black carbon mixes with other atmospheric components. Here we show that incorporating more realistic, multi-mixing-structure representations of black carbon increases the direct radiative effect. We find that aged black carbon particles, with thicker coatings and higher embedded fractions, enhance the direct radiative effect more efficiently. Using machine learning alongside the Community Earth System Model, we show that the direct radiative effect at the top of the atmosphere in regions with heavy black carbon pollution is 31.6% greater when multi-mixing structures are considered. These findings highlight the importance of modeling complex mixing structures of particle-resolved black carbon to accurately capture their warming impacts on global atmosphere, particularly in highly polluted regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

New Particle Formation and Growth to Climate-Relevant Aerosols at a Background Remote Site in the Western Himalaya

New particle formation (NPF) can influence the Earth’s radiative budget when the newly formed particles grow to climate-relevant sizes. Here, we present analysis of 21-months of continuous aerosol size distribution measurements at a background remote site in the western Himalaya and provide observational evidence that newly formed particles grow to cloud condensation nuclei (CCN)-active sizes (i.e. >20-100 nm in diameter). Out of total 55 NPF events, 38 (66%) events occurred in the pre-monsoon season (March-May). NPF events were classified into those with and without pollution influence as polluted and cleaner, respectively, using black carbon data. The analysis of air mass age, based on the ratio of number concentration of Aitken to accumulation mode aerosols, indicated that NPF occurred in the relatively cleaner air masses reaching to the site. The median formation rate of 10 nm particles and particle growth rates for cleaner events were three-fold and two-fold, respectively, higher than polluted events. We present the first estimates of the survival probability of newly formed particles to 50 nm and 100 nm size, which was not attempted in an Indian environment previously. The survival probability to 50 nm particles ranged from 44 to 98%, with a mean and standard deviation of 82 ± 18%. On average, ~60% of the particles surviving to 50 nm survived to 100 nm, making the overall survival probability of 100 nm to 53 ± 31%. This indicates that the probability of nucleated particles growing to CCN-active sizes under a large source of condensing vapor (transported from nearby lower-altitude regions) and low pre-existing particle concentrations (background mountain site) is high compared to the previous studies. These findings highlight the importance of the efficiency of nucleation events for producing CCN, which is a critical basis of aerosol indirect effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Estimation of Possible Primary Biological Particle Emissions and Rupture Events at the Southern Great Plains ARM Site

We use 10 years of data from the Department of Energy (DoE) Atmospheric Radiation Measurements (ARM) United States Southern Great Plains (SGP) site with nearby regional pollen and fungal spore measurements to indirectly estimate the seasonal influence of these two primary biological aerosol particles (PBAP). We estimate possible primary emissions of larger PBAP and PBAP rupture events, which form submicron organic aerosol during precipitation or high relative humidity. High pollen counts at two urban stations near SGP occur during late winter/early spring (day of year (DOY) 50–120) and late summer (DOY 240–310). Around 4–19 days per year show possible pollen events (PPE) when near-surface lidar observations of daily linear particle depolarization ratio >0.1 are coincident with high organic aerosol fraction. For PPE days with rainfall, aerosol size distribution observations show enhanced submicron particle concentrations consistent with pollen rupture events. For fungal spores, high fungal spore counts occur during late spring/early summer (DOY 110–195) and late summer/autumn (DOY 220–340). Based on size distribution observations, up to 7% of days have possible fungal spore rupture events (PFE) with higher aerosol number count specifically over the range expected for fungal spore fragment mobility diameter (20–50 nm). These short-lived PFE correlate with rainfall or occur after prolonged exposure to rainfall (e.g., >10 h). While the SGP site lacks direct measurements of bioaerosol and large particle sizes, this analysis suggests that PBAP primary emissions and rupture events could occur about 32 days per year, representing an important component of the aerosol budget during seasonal emissions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Simulation of metal nanoparticles growth in methane atmosphere of arc discharge: comparison to experiment

A direct current arc discharge in a methane atmosphere is a scalable and sustainable method to produce metal-carbon core–shell nanoparticles and single-walled carbon nanotubes, where a metal catalyst can be continuously supplied through evaporation of an anode made from the catalyst material. The size of catalyst particles is of critical importance as it can affect the synthesis yield and properties of nanotubes and core–shell nanoparticles. This study presents a numerical model describing the formation and growth of metal particles for the conditions representative of the arc discharge with an evaporating iron anode at near-atmospheric pressure of a methane-rich atmosphere. The model incorporates carbon adsorption to the metal surface and explains the limiting effect of carbon coverage on the size of metal nanoparticles. The predicted particle sizes are compared with experimental observations. The model also predicts higher concentrations of metal particles with the increasing partial pressure of methane.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Numerical coupling of aerosol emissions, dry removal, and turbulent mixing in the E3SM Atmosphere Model version 1 (EAMv1) – Part 1: Dust budget analyses and the impacts of a revised coupling scheme

Abstract. An earlier study evaluating dust life cycle in the Energy Exascale Earth System Model (E3SM) Atmosphere Model version 1 (EAMv1) has revealed that the simulated global mean dust lifetime is substantially shorter when higher vertical resolution is used, primarily due to significant strengthening of dust dry removal in source regions. This paper demonstrates that the sequential splitting of aerosol emissions, dry removal, and turbulent mixing in the model's time integration loop, especially the calculation of dry removal after surface emissions and before turbulent mixing, is the primary reason for the vertical resolution sensitivity reported in that earlier study. Based on this reasoning, we propose a revised numerical process coupling scheme that requires the least amount of code changes, in which the surface emissions are applied before turbulent mixing instead of before dry removal. The revised scheme allows newly emitted particles to be transported aloft by turbulence before being removed from the atmosphere, and hence better resembles the dust life cycle in the real world. Sensitivity experiments show that the revised process coupling substantially weakens dry removal and strengthens vertical mixing in dust source regions. It also strengthens the large-scale transport from source to non-source regions, strengthens dry removal outside the source regions, and strengthens wet removal and activation globally. In transient simulations of the years 2000–2009 conducted using 1∘ horizontal grid spacing, 72 vertical layers, and unchanged tuning parameters of emission strength, the revised process coupling leads to a 40 % increase in the global total dust burden and an increase of dust lifetime from 1.8 to 2.5 d in terms of 10-year averages. Weakened dry removal and increased mixing ratios are also seen for other aerosol species that have substantial surface emissions, although the changes in mixing ratio are considerably smaller for the submicron species than for dust and sea salt. Numerical experiments confirm that the revised coupling scheme significantly reduces the strong and non-physical sensitivities of model results to vertical resolution in the original EAMv1. This provides a motivation for adopting the revised scheme in EAM as well as for further improvements on the simple revision presented in this paper.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Systematic characterization of unknown compounds via dimensionality reduction of time series

Analysis of ambient aerosols provides valuable insight into particle sources and formation chemistry. However, due to the complexity of atmospheric data and the dynamic nature of aerosol composition, a substantial fraction of data often become discarded by conventional analysis methods. Furthermore, a large fraction of chemical species within those data are unidentifiable due to a lack of matching spectral information, resulting in suboptimal characterization of chemical composition. Previous work has demonstrated techniques for cataloging analytes in a chromatographic dataset by deconvolution of mass spectra, but integration of these analytes throughout a large dataset remains time consuming. Here, we present a method to automatically identify an ion for quantitation for single-ion chromatogram based peak fitting and integration, enabling comprehensive integration of analytes with minimal user interaction. The resulting time series are clustered with a machine-learning based dimensionality reduction technique to systematically investigate the underlying characteristics of the categorized analytes and gain new insights into the chemical composition and physicochemical properties of the unidentifiable analytes. We apply these methods to existing atmospheric datasets collected in Manacapuru, Brazil during the GoAmazon2014/5 campaign to identify new analytes and interpret their variability and transformations in the atmosphere. The analysis results generate 408 time series from cataloged analytes of interest, and the clustering of those time series with spherical k-means results in 8 distinct clusters. We find the analytes form clusters based on their distinct physicochemical properties, demonstrating the method’s ability to systematically identify and selectively filter contaminants and instrumental analytes and characterize the unidentifiable analytes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Global Kinetic Modeling of the Intrabinary Shock in Spider Pulsars

Abstract Spider pulsars are compact binary systems composed of a millisecond pulsar and a low-mass companion. The relativistic magnetically dominated pulsar wind impacts onto the companion, ablating it and slowly consuming its atmosphere. The interaction forms an intrabinary shock, a proposed site of particle acceleration. We perform global fully kinetic particle-in-cell simulations of the intrabinary shock, assuming that the pulsar wind consists of plane-parallel stripes of alternating polarity and that the shock wraps around the companion. We find that particles are efficiently accelerated via shock-driven reconnection. We extract first-principles synchrotron spectra and light curves, which are in good agreement with X-ray observations: (1) the synchrotron spectrum is nearly flat, F ν ∝ const; (2) when the pulsar spin axis is nearly aligned with the orbital angular momentum, the light curve displays two peaks, just before and after the pulsar eclipse (pulsar superior conjunction), separated in phase by ∼0.8 rad; (3) the peak flux exceeds the one at the inferior conjunction by a factor of 10.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Scaler Rates from the Pierre Auger Observatory: A New Proxy of Solar Activity

The modulation of low-energy galactic cosmic rays reflects interplanetary magnetic field variations and can provide useful information on solar activity. An array of ground-surface detectors can reveal the secondary particles, which originate from the interaction of cosmic rays with the atmosphere. In this work, we present an investigation of the low-threshold rate (scaler) time series recorded in 16 yr of operation by the Pierre Auger Observatory surface detectors in Malargüe, Argentina. Through an advanced spectral analysis, we detected highly statistically significant variations in the time series with periods ranging from the decadal to the daily scale. We investigate their origin, revealing a direct connection with solar variability. Thanks to their intrinsic very low noise level, the Auger scalers allow a thorough and detailed investigation of the galactic cosmic-ray flux variations in the heliosphere at different timescales and can, therefore, be considered a new proxy of solar variability.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Back Trajectories during SAIL

This data set contains air mass back trajectories generated during the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign using the Hybrid Single-Particle Lagrangian Integrated Trajectory model (HYSPLIT, Stein et al. 2015, Rolph et al. 2017). For each hour from January 1, 2021 to June 30, 2023, a 96-hour back trajectory was initiated at the SAIL sampling site, starting 100 m above ground level. The calculations used the GDAS meteorological data set with model vertical velocity. The files within this dataset show location and meteorological parameters of the back trajectory analysis. There are 21 columns within each data file. The first 2 columns pertain to back trajectory parameters: the trajectory number (which is always 1) and the meteorological grid number. The next 9 columns pertain to spatiotemporal information: the year, month, day, hour (0-23), and minute of the trajectory, the previous time of the trajectory (in negative hours), and the airmass location (latitude, longitude, and height in m AGL). The rest of the parameters within each file pertains to surface and meteorological characteristics of the airmass: pressure (in hPa), potential temperature (in K), temperature (in K), precipitation rate (in mm/hr), mixing depth (in m), relative humidity (in % relative to liquid water), specific humidity (in g/kg), H2O mixing ratio (in g/kg), underlying terrain height (in meters above sea level), and incoming radiation (in W/m^2).

back trajectory↗
DOE OSTI2026

Looking for New Particle Physics with Astrophysical Origin

In this thesis, I explore the consequences of introducing new particles into astrophysical environments, and place constraints on these particles using available data. I first consider Heavy Neutral Leptons (a proposed particle which has important implications for neutrinos) in the context of atmospheric interactions, the Sun, and supernovae. I then turn my focus to various models of dark matter, considering the reach of both the terrestrial and astronomical observables. A special focus is given to cases where dark matter clusters around Supermassive Black Holes.

Gustafson, Robert Andrew [Virginia Tech., Blacksbu↗
DOE OSTI2024

Experimental investigation of Multi-Mode heat transfer to a Free-Falling dilute particle cloud in a heated vertical tube

The development of dilute particle heat exchangers and reactors for advanced energy systems requires an understanding of the multi-mode heat transfer from a heated wall to falling particles. This study presents experimental results of the overall heat transfer coefficient for a free-falling, dilute flow of particles with solid volume fraction from 0.0005 to 0.006 corresponding to feed rates from 3.7 kg s -1 m -2 to 44 kg s -1 m -2 in a vertical, heated tube containing quiescent air at atmospheric pressure. Tube wall temperatures are varied between 300°C to 900°C while keeping the particle inlet temperature constant. The experimental results show that the overall heat transfer coefficient is a strong function of particle feed rate and surface temperature. Good agreement was obtained with prior studies conducted at comparable temperatures but lower particle feed rates (< 4 kg m -2 s -1 ). The established correlations for particle-to-wall radiation and particle-to-gas convection were used to estimate the wall-to-gas convective contribution from the measured overall heat transfer coefficient. The experimental results indicated a 4 to 6 times improvement in the wall convection in the solid-gas mixture compared to that expected from natural convection in a single-phase gas. Furthermore, the data presented here are applicable to characterize heat transfer in dilute particle heat exchangers, furnaces, and solar receivers.

14 SOLAR ENERGY↗
DOE OSTI2022

Modeling impacts of ice-nucleating particles from marine aerosols on mixed-phase orographic clouds during 2015 ACAPEX field campaign

Abstract. A large fraction of annual precipitation over the western United States comes from wintertime orographic clouds associated with atmospheric rivers (ARs). Transported African and Asian dust and marine aerosols from the Pacific Ocean may act as ice-nucleating particles (INPs) to affect cloud and precipitation properties over the region. Here we explored the effects of INPs from marine aerosols on orographic mixed-phase clouds and precipitation at different AR stages for an AR event observed during the 2015 ACAPEX field campaign under low dust (<0.02 cm−3) conditions. Simulations were conducted using the chemistry version of the Weather Research and Forecasting Model coupled with the spectral-bin microphysics at 1 km grid spacing, with ice nucleation connected with dust and marine aerosols. By comparing against airborne and ground-based observations, accounting for marine INP effects improves the simulation of AR-precipitation. The marine INPs enhance the formation of ice and snow, leading to less shallow warm clouds but more mixed-phase and deep clouds, as well as to a large spillover effect of precipitation after AR landfall. The responses of cloud and precipitation to marine INPs vary with the AR stages, with more significant effects before AR landfall and post-AR than after AR landfall, mainly because the moisture and temperature conditions change with the AR evolution. This work suggests weather and climate models need to consider the impacts of marine INPs since their contribution is notable under low dust conditions despite the much lower relative ice nucleation efficiency of marine INPs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

NPFTURBULENCE-Turbulent Layers Promoting New Particle Formation Field Campaign Report

This field campaign took place at the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) use facility’s Southern Great Plains (SGP) atmospheric observatory, located near Lamont, Oklahoma. The ArcticShark uncrewed aerial system conducted 10 research flights, accumulating 40.7 flight hours over the SGP site. Each flight originated from the Blackwell-Tonkawa Airport (BKN) and followed a “racetrack” pattern around the SGP field site. During these flights, mission scientists initiated vertical profiling based on the real-time performance of the aerosol instruments aboard the ArcticShark. Figure 1 below illustrates the flight paths of all missions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Can the Solar Atmosphere Generate Very-High-Energy Cosmic Rays?

The origin and acceleration of high-energy particles, constituting cosmic rays, is likely to remain an important topic in modern astrophysics. Among the two categories galactic and solar cosmic rays, the latter are much less investigated. The primary source of solar cosmic ray particles are impulsive explosions of the magnetized plasma, known as solar flares and coronal mass ejections. These particles, however, are characterized by relatively low energies compared to their galactic counterparts. In this work, we explore the resonance wave–wave (RWW) interaction between the polarized electromagnetic radiation emitted by the solar active regions and the quantum waves associated with high-energy, relativistic electrons generated during solar flares. Mathematically, the RWW interaction problem boils down to analyzing a Klein–Gordon Equation (spinless electrons) embedded in the electromagnetic field. We find that RWW could accelerate the relativistic electrons to enormous energies even comparable to energies in the galactic cosmic rays.

acceleration of particles↗
DOE OSTI2023

Biological particles and aerosol-cloud interactions in the Southern Great Plains

The United States Southern Great Plains (SGP) is the genesis for much of the warm season precipitation in the central and eastern United States. While atmospheric thermodynamics and large-scale dynamics play an important role in formation of precipitation, precipitation mechanisms are also sensitive to aerosols. Aerosols can suppress precipitation as cloud condensation nuclei (CCN) or act as ice nucleating particles (INP) in deep convective clouds. This project focused on understanding the role of primary biological aerosol particles (PBAP) in the region and its influence on cloud formation. Specifically, we focused on biological aerosol in the form of pollen, one type of PBAP that is emitted in large yet variable quantities from vegetation in the mid latitudes. Field observations provide evidence of pollen in the planetary boundary layer and pollen components in cloud droplets and fine particulate matter. Further, pollen grains can easily rupture when wet, forming smaller, sub pollen particles with sizes less than one micron. We evaluated the potential for PBAP events at the Department of Energy (DoE) SGP Atmospheric Radiation Measurement (ARM) research facility due to the rich dataset available. We also developed model simulations that accounted for pollen emission and the generation of sub pollen particles, which have been shown to be both cloud condensation nuclei and ice nucleating particles. The proposed work was designed to address the following questions: 1. What are the physical and chemical signatures of biological aerosol such as pollen in SGP ARM measurements? 2. What is the role of pollen-derived particles on deep convection and precipitation in the Central US? Using measurements from the DoE SGP ARM site and recent airborne campaigns, we evaluated the signatures of pollen and pollen-derived aerosols on optical properties, cloud properties and precipitation (Subba et al., 2021). We identified pollen-driven events over the data record and used the Weather Research and Forecasting Model with fully coupled chemistry (WRF-Chem) to conduct chemically realistic simulations of aerosols during and summer mesoscale convective events in the Southern Great Plains (Subba et al., in review). This work improved our understanding of the role of biological aerosol on clouds and precipitation in the Central United States and placed these results in context with anthropogenically-driven processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Thermal Stability of Silica for Application in Thermal Energy Storage

Thermal energy storage (TES) systems have enabled concentrating solar power (CSP) to remain competitive in the modern energy mix by providing economical load shifting grid services and firming up intermittent solar resource. Free from siting constraints, TES also shows promise as an economical alternative to traditional pumped-storage hydropower (PSH) and compressed air energy storage (CAES). As potential thermal energy storage media, some solid particles demonstrate stability over wide temperature ranges which allows for increased sensible energy storage density and is essential in achieving low-cost storage. Silica sand, in the form of a-quartz, is one such candidate. This work presents a brief review of relevant silica thermophysical properties and further investigates the thermal stability of silica particles as a candidate TES media by subjecting them to two different thermal tests: (1) a 500-hour thermal treatment at 1200 degrees C under varied atmospheres; and (2) cycling 25, 50, and 100 times between 300 degrees C and 1200 degrees C. For both tests, particle stability is examined by means of pre- and post-treatment Mie scattering. An additional XRD analysis is conducted for the 500-hour treatment in air. Results indicate limited changes in both particle distribution and crystallographic structure which is promising for the application as solid particle media for thermal energy storage.

concentrating solar power↗
DOE OSTI2023

Science Plan for the Deployment of the Third ARM Mobile Facility to the Southeastern United States at the Bankhead National Forest, Alabama (AMF3 BNF)

In 2018, the U.S. Department of Energy (DOE) held a workshop for the Atmospheric Radiation Measurement (ARM) (Mather and Voyles 2013) user facility to discuss critical climate challenges and locations where key ARM Mobile Facility (AMF) observational assets could impact Earth system modeling (ESM). As an outcome, the southeast United States (SE U.S.) was identified as a high-priority region to target climate-process studies that promote a deeper understanding of the climate system and bolster ARM interactions with the community to drive ESM advancement. The DOE ARM user facility is a globally recognized leader in deploying and operating strategically located observation sites around the world for studying the properties of aerosols and clouds and their interaction with radiation, precipitation, and the Earth’s surface. In partnering with the DOE Atmospheric System Research (ASR) program, ARM solicited a multi-agency Site Science Team approach to provide input and close interaction with ARM management towards a successful SE U.S. deployment of the ARM third Mobile Facility (AMF3) (Miller et al. 2016). These efforts included identifying key locations, science drivers and instruments, and measurement strategies to address the wider climate-process needs and ESM improvement. Community input served a vital role in establishing, refining, and informing the relevant drivers and decisions regarding this AMF3 deployment. The team has identified Northern Alabama (N. AL) as regionally representative to unlock the key opportunities that will improve our understanding and model representation of aerosol, cloud, and land-surface processes and their couplings in the SE U.S. A defining aspect of the AMF3 deployment is its commitment to long-term (anticipated five-year) observations to mitigate potential seasonal-to-annual variability that often limits appropriate attribution of phenomena to local or larger-scale processes. The proposed location may leverage nearby surface networks and multi-agency and partner assets to enrich this multi-year deployment. One motivation is to understand the role of spatiotemporal variability (thermodynamic, land-surface) across aspects of the climate system, with our AMF3 team anticipating future demands on characterizing the relationships between local-to-regional cloud development and surface processes across a diverse patchwork of natural, managed, and urban landscapes as found throughout the N. AL regions. The main site targets an intact, representative, forested region – the Bankhead National Forest (BNF) – underscoring further team commitment to regionally important land-atmosphere two-way interactive studies “from the canopy to the clouds”, with enhanced tower instrumentation augmenting traditional ARM capabilities adjacent to this site. Multiple supplemental sites will also be distributed across this region, prioritizing added needs for biodiversity. Anticipated high-priority cloud science themes will target N. AL as a regional SE U.S. hotbed for high-impact weather, convective cloud onset, and shallow-to-deep cloud transitioning. Anticipated aerosol drivers will focus on chemical processes that control the evolution of organic aerosol, the seasonality and spatial distribution of water vapor and particle-phase water, and its role on aerosol optical properties. Anticipated land-atmosphere drivers consider the two-way feedbacks between surface influence on aerosols, clouds, and precipitation properties and the associated radiative impacts on plant physiology and canopy-scale fluxes. Emphasis will include the study of the impact of surface processes on aerosols via precursor emission, and on clouds via moisture flux and thermal development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Quantifying the Contributions of Aerosol- and Snow-Produced ClNO 2 through Observations and 1D Modeling

Nitryl chloride (ClNO 2 ) is a radical reservoir that forms and accumulates in the nocturnal atmospheric boundary layer influenced by combustion emissions and chloride (e.g., sea salt and road salt). Upon sunrise, ClNO 2 rapidly photolyzes to generate highly reactive chlorine radicals (Cl • ) that affect the air quality by generating secondary air pollutants. Recent studies have shown road salt aerosols and saline snowpack to be sources of ClNO 2 in the wintertime urban environment; however, the quantitative contributions of each chloride source are not known. In this study, we examine the vertically resolved contributions of aerosol particles and saline snowpack as sources of ClNO 2 by using an observationally constrained snow–atmosphere coupled one-dimensional model applied to wintertime Kalamazoo, Michigan, U.S. Model simulations show that ClNO 2 emitted from urban snowpack can be vertically transported throughout the entire atmospheric boundary layer and can be a significant source of ClNO 2 , contributing up to ~60% of the ClNO 2 budget near the surface. Here, modeled snowpack ClNO 2 emission rates were 6 (±7) times higher than the observationally derived emission rates, suggesting that not all snow chloride is available for reaction. ClNO 2 production from both aerosol particles and snow emissions are required to best simulate the observed surface-level ClNO 2 . Using the traditional bulk parameterization for ClNO 2 produced from particles significantly overestimated ClNO 2 due to the assumption of having equivalent dinitrogen pentoxide (N 2 O 5 ) uptake and chloride availability for the entire particle population. In comparison, the chemically resolved surface area-based parameterization slightly underestimated the observations and had uncertainties deriving from ClNO 2 production from residential wood burning particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗