Search NASA⌕ Search

SEARCH · Search NASA

Results for “BASIC INTERACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Pioneer Venus mission plan for atmospheric probes and an orbiter.

The mission concept is described for a spin-stabilized spacecraft being designed to deliver an array of aerodynamic probes over the surface of Venus, and, on a second flight mission, to inject the spacecraft into a Venusian orbit. Large and Small Probes and the instrumented 'Bus' structure will enter the Venusian atmosphere and directly measure its characteristics. An orbiting configuration of the same basic Bus spacecraft will serve as a platform from which to examine the planetary environment, the outer atmosphere and its interaction with the solar wind, as well as surface topography. The orbital mission will extend over a complete revolution of the planet around the sun and around its own axis. Requirements for cost effectiveness and firm adherence within early cost projections are emphatic program guidelines which affect every major element of the mission plan and conceptual design.

Dyer, J. W.↗

Exploitation of Seasat-A oceanographic measurements for Navy R and D applications

Basic research, exploratory development and operational demonstration potentials for exploitation of SEASAT-A data are discussed. Some of the interactions and tradeoffs in sensor design and measurement technology, and advanced development of environmental analysis and prediction products for operational fleet support are outlined.

Noble, V.↗

Introduction: Man and his total environment

Environmental changes and the utilization of finite resources are analyzed. Beyond the satisfaction of basic physical needs, the advancement of civilization toward an ever-improving quality of like is likewise dependent upon mans' interaction with his entire environment. This larger system is controlled externally by electromagnetic and particle energy from the sun and internally by the dynamic interchange of energy between the solid earth, oceans, the atmosphere, and the magnetosphere. This exchange of energy that determines the structure of the earth's environemental system is evaluated.

Source record↗

The effects on the earth's magnetotail from shocks in the solar wind

A new, minimally diffusive MHD computer code has been used to simulate the time-dependent, 2D interaction of the solar wind with the earth's magnetosphere. The equilibrium with a simulated unmagnetized solar wind shows the basic features of the magnetosphere: bow shock, magnetopause, and long magnetotail. A simulated shock in the solar wind shows the presence of shock focussing in the midplane of the magnetotail. This focussing can be important in the energy budget of the plasma sheet and may have an important role in the initiation of substorms.

Lyon, J.↗

Interacting binary stars - Freaks or rosetta stones

Attention is given to semidetached binaries of the Algol type and to related interacting systems, such as Beta Lyrae and the W Serpentis stars. A brief description is given of observational problems. The basic properties of the Algol variables are satisfactorily explained by means of evolutionary models that assume considerable mass transfer between the components. It is pointed out that ultraviolet spectra obtained with the IUE satellite corroborate the view that the present subgiant secondary component was initially the more massive star and that it has been stripped of a large fraction of its mass so that the deep layers affected by CNO processing are now denuded. It is believed that the present-day 'classical' Algols must have undergone a phase of rapid mass transfer in the past and that Beta Lyrae and the W Serpentis stars are probably closer to that stage than ordinary Algols. Around the accreting star a complex structure is formed, and an induced stellar wind may blow a large part of the transferred matter out of the system.

Plavec, M. J.↗

Measurement of reach envelopes with a four-camera Selective Spot Recognition (SELSPOT) system

The basic Selective Spot Recognition (SELSPOT) system is essentially a system which uses infrared LEDs and a 'camera' with an infrared-sensitive photodetector, a focusing lens, and some A/D electronics to produce a digital output representing an X and Y coordinate for each LED for each camera. When the data are synthesized across all cameras with appropriate calibrations, an XYZ set of coordinates is obtained for each LED at a given point in time. Attention is given to the operating modes, a system checkout, and reach envelopes and software. The Video Recording Adapter (VRA) represents the main addition to the basic SELSPOT system. The VRA contains a microprocessor and other electronics which permit user selection of several options and some interaction with the system.

Stramler, J. H., Jr.↗

Atmospheric and Science Complexity Effects on Surface Bidirectional Reflectance

Among the tools used in passive remote sensing of Earth resources in the visible and near-infrared spectral regions are measurements of spectral signature and bidirectional reflectance functions (BDRFs). Determination of surface properties using these observables is complicated by a number of factors, including: (1) mixing of surface components, such as soil and vegetation, (2) multiple reflections of radiation due to complex geometry, such as in crop canopies, and (3) atmospheric effects. In order to bridge the diversity in these different approaches, there is a need for a fundamental physical understanding of the influence of the various effects and a quantiative measure of their relative importance. In particular, we consider scene complexity effects using the example of reflection by vegetative surfaces. The interaction of sunlight with a crop canopy and interpretation of the spectral and angular dependence of the emergent radiation is basically a multidimensional radiative transfer problem. The complex canopy geometry, underlying soil cover, and presence of diffuse as well as collimated illumination will modify the reflectance characteristics of the canopy relative to those of the individual elements.

Diner, D. J.↗

The probability of detecting absorption features in gamma-ray burst spectra

It has recently been suggested that several mechanisms for the primary release of energy in gamma-ray bursts may result in the excitation of magnetospheric plasma oscillations (MPO) above the polar cap of a neutron star. The basic MPO idea is refined by determining the soft photon source (which damps the particle motion via inverse Compton scattering interactions) self-consistently by means of a Monte Carlo simulation for the deposition of back-scattered gamma-ray energy below the stellar photosphere. The observed fraction of bursts displaying low-energy absorption features may be understood in the context of a model wherein the overall spectrum changes with inclination angle due to the superposition of several components with different angular distributions. GRB spectra should display these cyclotron lines about 18 percent of the time, which is consistent with the KONUS and Ginga sets of data.

Melia, F.↗

Parallel Grid Manipulations in Earth Science Calculations

The National Aeronautics and Space Administration (NASA) Data Assimilation Office (DAO) at the Goddard Space Flight Center is moving its data assimilation system to massively parallel computing platforms. This parallel implementation of GEOS DAS will be used in the DAO's normal activities, which include reanalysis of data, and operational support for flight missions. Key components of GEOS DAS, including the gridpoint-based general circulation model and a data analysis system, are currently being parallelized. The parallelization of GEOS DAS is also one of the HPCC Grand Challenge Projects. The GEOS-DAS software employs several distinct grids. Some examples are: an observation grid- an unstructured grid of points at which observed or measured physical quantities from instruments or satellites are associated- a highly-structured latitude-longitude grid of points spanning the earth at given latitude-longitude coordinates at which prognostic quantities are determined, and a computational lat-lon grid in which the pole has been moved to a different location to avoid computational instabilities. Each of these grids has a different structure and number of constituent points. In spite of that, there are numerous interactions between the grids, e.g., values on one grid must be interpolated to another, or, in other cases, grids need to be redistributed on the underlying parallel platform. The DAO has designed a parallel integrated library for grid manipulations (PILGRIM) to support the needed grid interactions with maximum efficiency. It offers a flexible interface to generate new grids, define transformations between grids and apply them. Basic communication is currently MPI, however the interfaces defined here could conceivably be implemented with other message-passing libraries, e.g., Cray SHMEM, or with shared-memory constructs. The library is written in Fortran 90. First performance results indicate that even difficult problems, such as above-mentioned pole rotation- a sparse interpolation with little data locality between the physical lat-lon grid and a pole rotated computational grid- can be solved efficiently and at the GFlop/s rates needed to solve tomorrow's high resolution earth science models. In the subsequent presentation we will discuss the design and implementation of PILGRIM as well as a number of the problems it is required to solve. Some conclusions will be drawn about the potential performance of the overall earth science models on the supercomputer platforms foreseen for these problems.

Sawyer, W.↗

Research in interactive scene analysis

The recovery of information about the three dimensional structure and physical characteristics of surfaces depicted in an image was studied focusing on two complementary problems: (1) basic techniques for inferring three dimensional surface shape from two dimensional images and (2) means for integrating the results of different techniques to obtain a globally consistent surface description. A technique was developed for constraining surface orientation along image contours that correspond to surface boundaries. A means for interpolating surface orientation estimates from a variety of sources into smooth surfaces--a major integration problem--was also developed. A computational model, based on these techniques, was proposed for inferring the three dimensional surface structure depicted in a line drawing.

Tenenbaum, J. M.↗

Fluctuations and massive separation in three-dimensional shock-wave/boundary-layer interactions

Shock-wave unsteadiness was observed in rapidly compressed supersonic turbulent boundary layer flows with significant separation. A Mach 2.85 shock-wave/turbulent boundary layer flow was set up over a series of cylinder-flare bodies in the High Reynolds Number Channel 1. The transition from fully attached to fully separated flow was studied using axisymmetric flares with increasing compression angles. In the second phase, the 30 deg flare was inclined relative to the cylinder axis, so that the effect on a separated flow of increasing 3 dimensionality could be observed. Two 3-D separated cases are examined. A simple conditional sampling technique is applied to the data to group them according to an associated shock position. Mean velocities and turbulent kinetic energies, computed from the conditionally samples data, are compared to those from the unsorted data and to computed values. Three basic questions were addressed: can conditional sampling be used to provide snapshots of the flow; are averaged turbulence quantities dominated by the bimodal nature of the interaction; and is the shock unsteadiness really important to computational accuracy.

Kussoy, M. I.↗

Fluctuations and massive separation in three-dimensional shock-wave/boundary-layer interactions

Shock-wave unsteadiness was observed in rapidly compressed supersonic turbulent boundary layer flows with significant separation. A Mach 2.85 shock-wave/turbulent boundary layer flow was set up over a series of cylinder-flare bodies in the High Reynolds Number Channel 1. The transition from fully attached to fully separated flow was studied using axisymmetric flares with increasing compression angles. In the second phase, the 30-deg flare was inclined relative to the cylinder axis, so that the effect on a separated flow of increasing three-dimensionality could be observed. Two 3-D separated cases are examined. A simple conditional sampling technique is applied to the data to group them according to an associated shock position. Mean velocities and turbulent kinetic energies, computed from the conditionally sampled data, are compared to those from the unsorted data and to computed values. Three basic questions were addressed: can conditional sampling be used to provide snapshots of the flow; are averaged turbulence quantities dominated by the bimodal nature of the interaction; and is the shock unsteadiness really important to computational accuracy.

Kussoy, M. I.↗

ISS Microgravity Research Payload Training Methodology

The NASA Microgravity Research Discipline has multiple categories of science payloads that are being planned and currently under development to operate on various ISS on-orbit increments. The current program includes six subdisciplines; Materials Science, Fluids Physics, Combustion Science, Fundamental Physics, Cellular Biology and Macromolecular Biotechnology. All of these experiment payloads will require the astronaut various degrees of crew interaction and science observation. With the current programs planning to build various facility class science racks, the crew will need to be trained on basic core operations as well as science background. In addition, many disciplines will use the Express Rack and the Microgravity Science Glovebox (MSG) to utilize the accommodations provided by these facilities for smaller and less complex type hardware. The Microgravity disciplines will be responsible to have a training program designed to maximize the experiment and hardware throughput as well as being prepared for various contingencies both with anomalies as well as unexpected experiment observations. The crewmembers will need various levels of training from simple tasks as power on and activate to extensive training on hardware mode change out to observing the cell growth of various types of tissue cultures. Sample replacement will be required for furnaces and combustion type modules. The Fundamental Physics program will need crew EVA support to provide module change out of experiment. Training will take place various research centers and hardware development locations. It is expected that onboard training through various methods and video/digital technology as well as limited telecommunication interaction. Since hardware will be designed to operate from a few weeks to multiple research increments, flexibility must be planned in the training approach and procedure skills to optimize the output as well as the equipment maintainability. Early increment lessons learned will be addressed.

Schlagheck, Ronald↗

Program for computer aided reliability estimation

A computer program for estimating the reliability of self-repair and fault-tolerant systems with respect to selected system and mission parameters is presented. The computer program is capable of operation in an interactive conversational mode as well as in a batch mode and is characterized by maintenance of several general equations representative of basic redundancy schemes in an equation repository. Selected reliability functions applicable to any mathematical model formulated with the general equations, used singly or in combination with each other, are separately stored. One or more system and/or mission parameters may be designated as a variable. Data in the form of values for selected reliability functions is generated in a tabular or graphic format for each formulated model.

Mathur, F. P.↗

Interactive aircraft flight control and aeroelastic stabilization

Several examples are presented in which flutter involving interaction between flight mechanics modes and elastic wind bending occurs for a forward swept wing flight vehicle. These results show the basic mechanism by which the instability occurs and form the basis for attempts to actively control such a vehicle.

Weisshaar, T. A.↗

Magnetospheres of Jupiter and Saturn

During the time from 1973 to 1981, the giant planets, Jupiter and Saturn, have been studied with the aid of the spacecraft Pioneers 10, 11, and Voyagers 1 and 2. The present investigation is concerned with the study of the magnetospheres of these planets, taking into account the immediate region of their environment in which the planetary magnetic field is the dominant physical force, and the boundary of the magnetospheres which is formed by the interaction with the solar wind. Attention is given to the recent results obtained by the Voyagers. It is found that the basic features of the magnetospheres of Jupiter and Saturn are similar to those of the earth. There are, however, also differences with the earth which relate to the large amount of entrapped low energy plasmas that form a magnetodisk and an Io associated torus at Jupiter, while at Saturn there is a Titan torus and a substantial ring current.

Ness, N. F.↗

IDIMS/GEOPAK: Users manual for a geophysical data display and analysis system

The application of an existing image analysis system to the display and analysis of geophysical data is described, the potential for expanding the capabilities of such a system toward more advanced computer analytic and modeling functions is investigated. The major features of the IDIMS (Interactive Display and Image Manipulation System) and its applicability for image type analysis of geophysical data are described. Development of a basic geophysical data processing system to permit the image representation, coloring, interdisplay and comparison of geophysical data sets using existing IDIMS functions and to provide for the production of hard copies of processed images was described. An instruction manual and documentation for the GEOPAK subsystem was produced. A training course for personnel in the use of the IDIMS/GEOPAK was conducted. The effectiveness of the current IDIMS/GEOPAK system for geophysical data analysis was evaluated.

Libert, J. M.↗

Technology research for strapdown inertial experiment and digital flight control and guidance

A helicopter flight-test program to evaluate the performance of Honeywell's Tetrad - a strapdown, laser gyro, inertial navitation system is discussed. The results of 34 flights showed a mean final navigational velocity error of 5.06 knots, with a standard deviation of 3.84 knots; a corresponding mean final position error of 2.66 n.mi., with a standard deviation of 1.48 n.m.; and a modeled mean-position-error growth rate for the 34 tests of 1.96 knots, with a standard deviation of 1.09 knots. Tetrad's four-ring laser gyros provided reliable and accurate angular rate sensing during the test program and on sensor failures were detected during the evaluation. Criteria suitable for investigating cockpit systems in rotorcraft were developed. This criteria led to the development of two basic simulators. The first was a standard simulator which could be used to obtain baseline information for studying pilot workload and interactions. The second was an advanced simulator which integrated the RODAAS developed by Honeywell into this simulator. The second area also included surveying the aerospace industry to determine the level of use and impact of microcomputers and related components on avionics systems.

Carestia, R. A.↗