Search NASA⌕ Search

SEARCH · Search NASA

Results for “Barrier properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Observed Covariations in Boundary Layer and Cumulus Cloud Layer Processes

In this paper we examine variations in boundary-layer processes spanning the shallow to deep cumulus transition. This is accomplished by differentiating boundary layer properties on the basis of convective outcomes, ranging from shallow to deep, as observed at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site in Oklahoma, USA. Doppler lidar, radar, and radiosonde data are combined to determine statistical differences in boundary layer and cloud layer properties using a large sample (236) of days with a range of convective outcomes: shallow, congestus, and deep convection. In these analyses, the radar characterizes diurnal cloud depth, the lidar quantifies updraft and downdraft properties in the subcloud layer, and daily radiosonde data provides the convective inhibition (CIN). Combined, these data are used to test the hypothesis that deep convection occurs when the strength of the boundary layer turbulence (i.e., TKE) exceeds the strength of the energy barrier (i.e., CIN) at the top of the CBL. Results show that days with deep convective clouds have significantly lower vertical velocity variance and weaker updrafts within the subcloud layer. However, CIN values are also found to be significantly lower on deep convective days, allowing for these weaker updrafts to penetrate the energy barrier and reach the level of free convection (LFC). In contrast, shallow convective outcomes occur when the updrafts are strong in an absolute sense, but are weak when compared to the strength of the energy barrier. These findings support the use of the CIN/TKE framework in parameterizing convection in coarse resolution models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Formulation and Performance Evaluation of Epoxy Sealant Systems for Double-Shell Tank Bottom Refurbishment

The performance of epoxy sealants used in the refurbishment of double-shell tank (DST) systems requires balancing processability, thermomechanical stability, and adhesion to cementitious substrates. This study incorporates Heloxy 8 as a reactive diluent into Westlake 862 epoxy to tailor workability and cured-state properties. Rheological time-sweep analysis demonstrates that increasing the diluent content significantly reduces complex viscosity and extends workability, thereby improving pumpability and flow for large-area applications. However, the targeted 2-hour processing window is not fully achieved. Differential scanning calorimetry (DSC) confirms that all formulations cure at room temperature to glass transition temperatures ( T g ) at least 20 °C above the maximum DST operating temperature (27 °C), thereby ensuring service in the glassy regime. Dynamic mechanical analysis (DMA) reveals formulation-dependent reductions in tan delta and increases in storage modulus, indicating increasingly elastic and mechanically stable networks with diluent incorporation. Pull-off adhesion testing shows that modified formulations (70–90% Westlake epoxy) exhibit significantly higher adhesion strengths than the unmodified system. Grout cohesive failure indicates that interfacial bonding exceeds substrate strength. Collectively, these results demonstrate that controlled reactive diluent incorporation enables optimization of processing behavior, interfacial adhesion, and thermomechanical performance, supporting the suitability of the modified epoxy systems as durable sealant layers for cementitious barrier applications in hazardous waste containment infrastructure.

Differential scanning calorimetry↗
DOE OSTI2022

Using post-processing heat treatments to elucidate precipitate strengthening of additively manufactured superalloy 718

The poor machinability and extensive work hardening of Ni-based superalloys makes additive manufacturing an attractive option for producing geometrically complex components with distinct microstructures. Although previous studies show recovery of high strength at room temperature, very few studies demonstrate successful properties at elevated temperatures required for industrial applications. Here, the objectives of this study are to present a post-build heat treatment for high strength across a wide temperature range, determine the strength contribution of nanoscale precipitating phases to the overall mechanical properties of superalloy 718, and from these, provide a comprehensive microstructure-property relationship for wrought and AM 718 to guide efforts to simulate the properties of AM components. Laser powder bed fusion–produced superalloy 718 was characterized at multiple length scales using scanning electron microscopy and transmission electron microscopy in the as-built condition and with multiple heat treatments designed to form combinations of γ', γ", and δ precipitates. Uniaxial tensile tests performed from room temperature to 600 °C on subsize specimens determined the yield strength, elastic modulus, ultimate tensile strength, fracture stress, and uniform elongation. Precipitates in this work proved to be weak barriers to dislocation motion through a dispersed barrier model, but they provided strength to the alloy through their consistent high density. The relative contribution to the yield strength from γ" remained consistent between 48% and 57% of the total strength up to 600 °C, the primary influence on the high temperature strength of superalloy 718. The strength factors for γ" and δ precipitates were found to trend inversely with tensile test temperature and may be attributable to the differences in precipitate coherency. A post-build heat treatment is recommended to maintain high strength at elevated temperatures. A quantitative microstructure-property relationship, dependent on precipitate size, density, and morphology, was derived and can estimate the yield strength across a wide temperature range applicable to the operational regimes for superalloy 718.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Real-Time KMC Simulation of Vacancy-Mediated Intermixing in Au@Ag Octahedral Core–Cubic Shell Nanocrystals with Ab Initio-Guided Kinetics

Utilization of core–shell rather than monometallic nanocrystals (NCs) facilitates fine-tuning of NC properties for applications. However, compositional evolution via intermixing can degrade these properties prompting recent experimental studies. We develop an atomistic-level stochastic model for vacancy-mediated intermixing exploiting a formalism which allows incorporation at an ab initio density functional theory level of not just the thermodynamics of vacancy formation, but also relevant diffusion barriers for a vast number of possible local environments (in the core and in the shell, at the interface, and in the intermixed phase). This facilitates a predictive treatment and comprehensive understanding of intermixing on the relevant time scale (e.g., 10 1 –10 3 s). In contrast, previous modeling at the atomistic level utilized only unrealistic generic prescriptions of barriers or employed simplified continuum treatments. For Au@Ag octahedral core–cubic shell NCs, our modeling not only captures the experimentally observed rate or time scale for intermixing of ~100 s at 450 °C for 60 nm NCs, but also elucidates the underlying rate controlling processes and the effective intermixing barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Staircase resiliency in a fluctuating cellular array

Inhomogeneous mixing by stationary convective cells set in a fixed array is a particularly simple route to layering. Layered profile structures, or staircases, have been observed in many systems, including drift-wave turbulence in magnetic confinement devices. The simplest type of staircase occurs in passive-scalar advection, due to the existence and interplay of two disparate timescales, the cell turn-over (τ H ), and the cell diffusion (τ D ) time. In this simple system, we study the resiliency of the staircase structure in the presence of global transverse shear and weak vortex scattering. The fixed cellular array is then generalized to a fluctuating vortex array in a series of numerical experiments. The focus is on regimes of low-modest effective Reynolds numbers, as found in magnetic fusion devices. By systematically perturbing the elements of the vortex array, we learn that staircases form and are resilient (although steps become less regular, due to cell mergers) over a broad range of Reynolds numbers. The criteria for resiliency are (a) τ D >>τ H and (b) a sufficiently high profile curvature (κ ≥ 1.5). We learn that scalar concentration travels along regions of shear, thus staircase barriers form first, and scalar concentration "homogenizes" in vortices later. The scattering of vortices induces a lower effective speed of scalar concentration front propagation. The paths are those of the least time. We observe that if background diffusion is kept fixed, the cell geometric properties can be used to derive an approximation for the effective diffusivity of the scalar. Furthermore, the effective diffusivity of the fluctuating vortex array does not deviate significantly from that of the fixed cellular array.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Gold-Standard Chemical Database 137 (GSCDB137): A Diverse Set of Accurate Energy Differences for Assessing and Developing Density Functionals

We present GSCDB137, a rigorously curated benchmark library of 137 data sets (8377 entries) covering main-group and transition-metal reaction energies and barrier heights, (intra- and intermolecular) noncovalent interactions, dipole moments, polarizabilities, electric-field response energies, and vibrational frequencies. Legacy data from GMTKN55 and MGCDB84 have been updated to today's best reference values; redundant or low-quality points were removed, and many new, property-focused sets were added. Testing 29 popular density functional approximations (DFAs) confirms the expected Jacob's-ladder hierarchy overall but also reveals notable exceptions: functional performance for frequencies and electric-field properties correlates poorly with that for other ground-state energetics. ωB97M-V and ωB97X-V are the most balanced hybrid meta-GGA and hybrid GGA, respectively; B97M-V and revPBE-D4 lead the meta-GGA and GGA classes. Double hybrids lower mean errors by about 30% versus their hybrid analogues but demand careful frozen-core, basis set, and spin contamination treatment. GSCDB137 offers a comprehensive, openly documented platform for rigorous validation of DFA and universal machine learning potentials, and training of the next generation of exchange-correlation functionals.

Liang, Jiashu [University of California, Berkeley,↗
DOE OSTI2025

The mechanics of nucleation and growth and the surface tensions of active matter

Homogeneous nucleation, a textbook transition path for phase transitions, is typically understood on thermodynamic grounds through the prism of classical nucleation theory. However, recent studies have suggested the applicability of classical nucleation theory to systems far from equilibrium. Here, in this article, we formulate a purely mechanical perspective of homogeneous nucleation and growth, elucidating the criteria for the properties of a critical nucleus without appealing to equilibrium notions. Applying this theory to active fluids undergoing motility-induced phase separation, we find that nucleation proceeds in a qualitatively similar fashion to equilibrium systems, with concepts such as the Gibbs–Thomson effect and nucleation barriers remaining valid. We further demonstrate that the recovery of such concepts allows us to extend classical theories of nucleation rates and coarsening dynamics to active systems upon using the mechanically derived definitions of the nucleation barrier and surface tensions. Three distinct surface tensions—the mechanical, capillary, and Ostwald tensions—play a central role in our theory. While these three surface tensions are identical in equilibrium, our work highlights the distinctive role of each tension in the stability of active interfaces and the nucleation and growth of motility-induced phases.

Capillary waves↗
DOE OSTI2023

Magnetoresistance anomaly during the electrical triggering of a metal-insulator transition

Phase separation naturally occurs in a variety of magnetic materials and it often has a major impact on both electric and magnetotransport properties. In resistive switching systems, phase separation can be created on demand by inducing local switching, which provides an opportunity to tune the electronic and magnetic state of the device by applying voltage. Here we explore the magnetotransport properties in the ferromagnetic oxide La 0.7 ⁢Sr 0.3 ⁢MnO 3 (LSMO) during the electrical triggering of an intrinsic metal-insulator transition (MIT), which produces volatile resistive switching. This switching occurs in a characteristic spatial pattern, i.e., the formation of a high-resistance barrier perpendicular to the current flow, enabling an electrically actuated ferromagnetic-paramagnetic-ferromagnetic phase separation. At the threshold voltage of the MIT triggering, both anisotropic and colossal magnetoresistances exhibit anomalies including a large increase in magnitude and a sign flip. Computational analysis revealed that these anomalies originate from the coupling between the switching-induced phase separation state and the intrinsic magnetoresistance of LSMO. Furthermore, this work demonstrates that driving the MIT material into an out-of-equilibrium resistive switching state provides the means for electrical control of the magnetotransport phenomena.

Complex oxides↗
DOE OSTI2026

The Kinetic Consequences of Water on Catalytic Methane Pyrolysis

Hydrogen production from biomass and natural gas has emerged as a prominent research area in response to the growing demand for energy from alternative sources that minimize CO 2 emissions. In this study, we investigate the impact of water, which is present in and generated from biomass-derived streams, on carbon nanotube (CNT) growth and hydrogen production during methane decomposition using Ni–Mo/MgO as a catalyst. We reveal here that the role of water on CNT growth is highly complex; its effect depends on the stage of growth at which the water is incorporated. When water is introduced at the beginning of methane decomposition ( t = 0 h), methane conversion rates are negatively impacted. We hypothesize that water inhibits the significant phase changes the Ni–Mo/MgO catalyst undergoes during catalyst carburization. In contrast, the incorporation of a small percentage of water after a stabilization period ( t = 3 h) results in methane conversion rate enhancements that scale with the introduced water partial pressure as water selectively reacts with amorphous carbon deposits that lead to catalyst deactivation, thus prolonging the lifetime of some of the most active sites. Moreover, water incorporation after stabilization significantly reduces the apparent activation energy. Density Functional Theory (DFT) calculations reveal that water preferentially interacts with carbon fragments on the catalyst surface to remove carbon deposits with a barrier lower than that required for methane activation, further supporting its role in cleaning active sites on the catalyst surface. Characterization of the resulting carbon nanotubes reveals the formation of more graphitic materials produced in the presence of water, highlighting the impact of water on nanotube properties. These results provide clarity toward the many ways in which water, or cofeeding of biomass-derived materials, may impact catalytic methane pyrolysis rates.

carbon nanotubes↗
DOE OSTI2021

Evidence for anisotropic spin-triplet Andreev reflection at the 2D van der Waals ferromagnet/superconductor interface

Fundamental symmetry breaking and relativistic spin–orbit coupling give rise to fascinating phenomena in quantum materials. Of particular interest are the interfaces between ferromagnets and common s-wave superconductors, where the emergent spin-orbit fields support elusive spin-triplet superconductivity, crucial for superconducting spintronics and topologically-protected Majorana bound states. Here, we report the observation of large magnetoresistances at the interface between a quasi-two-dimensional van der Waals ferromagnet Fe 0.29 TaS 2 and a conventional s-wave superconductor NbN, which provides the possible experimental evidence for the spin-triplet Andreev reflection and induced spin-triplet superconductivity at ferromagnet/superconductor interface arising from Rashba spin-orbit coupling. The temperature, voltage, and interfacial barrier dependences of the magnetoresistance further support the induced spin-triplet superconductivity and spin-triplet Andreev reflection. This discovery, together with the impressive advances in two-dimensional van der Waals ferromagnets, opens an important opportunity to design and probe superconducting interfaces with exotic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural and biophysical insights into targeting of claudin-4 by a synthetic antibody fragment

Claudins are a 27-member family of ~25 kDa membrane proteins that integrate into tight junctions to form molecular barriers at the paracellular spaces between endothelial and epithelial cells. As the backbone of tight junction structure and function, claudins are attractive targets for modulating tissue permeability to deliver drugs or treat disease. However, structures of claudins are limited due to their small sizes and physicochemical properties—these traits also make therapy development a challenge. Here we report the development of a synthetic antibody fragment (sFab) that binds human claudin-4 and the determination of a high-resolution structure of it bound to claudin-4/enterotoxin complexes using cryogenic electron microscopy. Structural and biophysical results reveal this sFabs mechanism of select binding to human claudin-4 over other homologous claudins and establish the ability of sFabs to bind hard-to-target claudins to probe tight junction structure and function. The findings provide a framework for tight junction modulation by sFabs for tissue-selective therapies.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Long-range model of vibrational autoionization in core-nonpenetrating Rydberg states of NO

In high orbital angular momentum (ℓ ≥ 3) Rydberg states, the centrifugal barrier hinders the close approach of the Rydberg electron to the ion-core. As a result, these core-nonpenetrating Rydberg states can be well described by a simplified model in which the Rydberg electron is only weakly perturbed by the long-range electric properties (i.e., multipole moments and polarizabilities) of the ion-core. We have used a long-range model to describe the vibrational autoionization dynamics of high-ℓ Rydberg states of nitric oxide (NO). In particular, our model explains the extensive angular momentum exchange between the ion-core and the Rydberg electron that had been previously observed in vibrational autoionization of f (ℓ = 3) Rydberg states. These results shed light on a long-standing mechanistic question around these previous observations and support a direct, vibrational mechanism of autoionization over an indirect, predissociation-mediated mechanism. In addition, our model correctly predicts newly measured total decay rates of g (ℓ = 4) Rydberg states because for ℓ ≥ 4, the non-radiative decay is dominated by autoionization rather than predissociation. We examine the predicted NO + ion rotational state distributions generated by vibrational autoionization of g states and discuss applications of our model to achieve quantum state selection in the production of molecular ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structural Rearrangements of Subnanometer Cu Oxide Clusters Govern Catalytic Oxidation

Sub-nanometer metal oxide clusters are very important materials that are widely used, for example, in catalysis or electronic devices such as sensors. Hence, it is critical to understand the atomic structures and properties of sub-nanometer metal oxide clusters under a reactive gas environment, such as O 2 . We consider here experimentally accessible precise-size Cu clusters (Cu 4 ) supported on partially hydroxylated amorphous alumina and show that such clusters can access, in catalytic conditions at high temperature under a pressure of O 2 , a large ensemble of oxidized structures, representing a large variety of oxygen content, of geometries in link with the support, and of catalytic activities for oxidation reactions, as seen from their reducibilities. A grand canonical basin hopping method based on first-principles energy reveals an ensemble of 24 configurations for the Cu 4 O x cluster of low free energy, less than 0.8 eV above the global minimum. The low free energy ensemble consists of clusters of different stoichiometries, which are mainly Cu 4 O 3 and Cu 4 O 4 in the temperature range of 200–400 °C and under a pressure of 0.5 bar of O 2 . The presence of several competitive isomers at each composition implies that cluster fluxionality impacts the phase diagram, which should be ensemble-averaged. In terms of catalytic oxidation activity, Cu 4 O 3 isomers present highly variable O abstraction energy: the most stable isomers are inactive for alkane oxidative dehydrogenation, but isomerization to metastable isomers, that proceed with low barrier, enable to create active configurations with low O abstraction energy. O atoms with the lowest anionic character, and thus of more electrophilic nature, present the best oxidation capability. In contrast, all Cu 4 O 4 isomers show a low O abstraction energy and a high potential catalytic activity. Here, this manuscript demonstrates the unique structural and electronic properties of sub-nano Cu oxide clusters and illustrates the critical roles of configuration ensembles and rearrangement to highly reactive metastable cluster isomers in nanocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Characterizing particle-based thermal storage performance using optical methods for use in next generation concentrating solar power plants

Concentrating Solar Power (CSP) generation is an attractive option for low-emission power generation; however, the high costs of thermal storage associated with concentrating solar create a large barrier for their use and adaptation into modern life. Lowering their operation costs, while maintaining high thermal storage and transfer performance is essential. Solid particle-based heat exchange systems can reduce CSP cost but are often less efficient. Efforts to increase their performance have led to use of binary size particle mixes. Presented is an optical-based thermal analysis technique used to measure near-wall thermal conductivity of particle beds essential in determining their heat exchanger efficiency. Modulated Photothermal Radiometry is used to make dynamic temperature measurements, allowing for the extraction of the most relevant thermal properties like thermal conductivity, specific heat, and effusivity. The system uses a modulated laser source causing a damped periodic heat flux, resulting in a frequency and thermal property dependent surface temperature, of which is measured using radiometry. Lock-In techniques are used to extrapolate the amplitude of the signal. Plotting the amplitude against the root angular frequency allows for effusivity measurement by ratio to a known sample. Using specific heat measurements from literature and density measurements, the thermal conductivity of the particle mixes can be calculated. The simplicity of MPTR to probe through the depth of the bed is ideal for use in CSP for dynamic thermal performance monitoring.

Corona, Javier↗
DOE OSTI2024

Role of Short-Range Order on Diffusion Coefficients in the Li–Mg Alloy

Li–Mg alloys are important because of their beneficial role in fostering uniform plating and stripping of lithium in all-solid-state batteries. The alloy Li x Mg 1–x forms a solid solution on the BCC crystal structure when the lithium content is greater than x ≈ 0.3. The activation barriers of lithium and magnesium exchanges with a vacancy, crucial for substitutional diffusion, are predicted to be exceptionally low and almost identical, with negligible dependence on the alloy composition. The equilibrium vacancy concentration at room temperature is predicted to be very low, and it also remains almost constant with no dependence on Mg content in the alloy (for x Li ≥ 0.5). Nevertheless, both experiments and kinetic Monte Carlo simulations indicate that the tracer diffusion coefficients decrease by almost an order of magnitude with the addition of Mg to the alloy. In this contribution, the crucial role that chemical short-range order plays in affecting the diffusion coefficients is studied. Chemical short-range order is found to increase the effective activation barrier for lithium and magnesium diffusion by making successive atomic hops with vacancies correlated.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Properties of V-defect injectors in long wavelength GaN LEDs studied by near-field electro- and photoluminescence

The efficiency of multiple quantum well (QW) light emitting diodes (LEDs) to a large degree depends on uniformity of hole distribution between the QWs. Typically, transport between the QWs takes place via carrier capture into and thermionic emission out of the QWs. In InGaN/GaN QWs, the thermionic hole transport is hindered by the high quantum confinement and polarization barriers. To overcome this drawback, hole injection through semipolar QWs located at sidewalls of V-defects had been proposed. However, in the case of the V-defect injection, strong lateral emission variations take place. In this work, we explore the nature of these variations and the impact of the V-defects on the emission spectra and carrier dynamics. The study was performed by mapping electroluminescence (EL) and photoluminescence (PL) with a scanning near-field optical microscope in LEDs that contain a deeper well that can only be populated by holes through the V-defects. Applying different excitation schemes (electrical injection and optical excitation in the far- and near-field), we have shown that the EL intensity variations are caused by the lateral nonuniformity of the hole injection. We have also found that, in biased structures, the PL intensity and decay time in the V-defect regions are only moderately lower that in the V-defect-free regions thus showing no evidence of an efficient Shockley-–Read–Hall recombination. In the V-defect regions, the emission spectra experience a red shift and increased broadening, which suggests an increase of the In content and well width in the polar QWs close to the V-defects.

Electroluminescence↗
DOE OSTI2025

Overcoming the thermal conductivity versus oxidation resistance barrier in high-temperature steels

Heat-resistant steels with high chromium additions (≥5 weight percent) are critical for many high temperature energy and manufacturing applications, including heat exchangers, pistons for engines, and dies for metal working and casting. However, while high chromium additions increase oxidation resistance at elevated temperatures, they also compromise thermal conductivity, resulting in a metallurgical trade-off between these two important properties. Here we show that a microstructure with both higher thermal conductivity and improved oxidation resistance at elevated temperatures is achieved in a unique steel with only 1 weight percent chromium, thereby overcoming the long-standing metallurgical trade-off. This is accomplished through a tailored thermal treatment that produces a tempered martensitic matrix with low solute content and a fine dispersion of copper precipitates and molybdenum enriched carbides. A further discovery is that the resultant thermally grown oxide includes an iron-copper-manganese-enriched outer layer that provides high-temperature oxidation protection equivalent to heat-resistant steels with five times the chromium content and 25% lower thermal conductivity.

Pierce, Dean T. [Oak Ridge National Laboratory (OR↗
DOE OSTI2025

Processes in Salt Repositories for Radioactive Waste Disposal

This document summarizes the key processes (thermal, hydrological, mechanical, and chemical; THMC) impacting the features of a deep geological repository for radioactive waste in salt. Some processes are natural and on-going whether the repository is there or not, and other processes are driven by the perturbation associated with the repository. The features considered here include both engineered and natural components of the repository system. The engineered barrier system (EBS) in a salt repository is quite different from those implemented for a repository in clay or crystalline rocks, because it is comprised mostly of granular salt and salt-compatible cements, rather than bentonite. When compared to other rocks (i.e., silicates), salt has unique properties that make it an excellent potential host rock. Openings and fractures in salt creep closed readily. Salt has high thermal conductivity, which can reduce peak temperatures. Additionally, far away from the excavations the porosity of salt is unconnected, which leads to essentially zero advective or diffusive transport. The small amount of hypersaline brine occurring in salt minimizes microbial activity, reduces colloid-assisted transport, and eliminates in-package criticality (i.e., chloride is a neutron poison). At the end of the report, we present a brief outline for a potential salt repository, including considerations avoided in previous repository disposal concepts. We propose considering higher-temperature processes in future disposal concepts, rather than trying to minimize the thermal perturbation of the repository. Since hot salt is drier, a dry repository would limit corrosion, gas generation, and solute transport. Openings and fractures creep shut faster in hot salt. Therefore, higher temperatures could be seen as beneficial, rather than something to minimize, through increased spacing between waste packages (increasing repository costs).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗