Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computing methodologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

INVESTIGATION OF A DYNAMIC POWER LINE RATING CONCEPT FOR IMPROVED WIND ENERGY INTEGRATION OVER COMPLEX TERRAIN

Dynamic Line Rating (DLR) is a smart grid technology that allows the rating of power line to be based on real-time conductor temperature dependent on local weather conditions. In current practice overhead power lines are generally given a conservative rating based on worst case weather conditions. Using historical weather data collected over a test bed area, we demonstrate there is often additional transmission capacity not being utilized with the current static rating practice. We investigate a new dynamic line rating methodology using computational fluid dynamics (CFD) to determine wind conditions along transmission lines at dense intervals. Simulated results are used to determine conductor temperature by calculating the transient thermal response of the conductor under variable environmental conditions. In calculating the conductor temperature, we use both a calculation with steady-state assumption and a transient calculation. Under low wind conditions, steady-state assumption predicts higher conductor temperatures that could lead to curtailments, whereas transient calculations produce conductor temperatures that are significantly lower, implying the availability of additional transmission capacity.

13 HYDRO ENERGY↗

4.2.1.31 Integrated Life Cycle Sustainability Analysis

This project provides the Department of Energy's Bioenergy Technologies Office (BETO) with strategic decision-support for the evaluation of its R&D portfolio by developing, validating, and applying a coherent methodology and consistent model framework to quantify the net effects of an expanding US bioeconomy. The framework fills an analysis gap previously identified by Peer Review and supports a related milestone in BETO's Multi-Year Program Plan. The framework was scoped with inputs from practitioners in academia, national laboratories, and federal agencies. The model is a top-down, economy-wide framework using a coherent methodology to compute environmental and socio-economic metrics. It is purposefully complementary to existing bottom-up, process-based techno-economic and life cycle assessment BETO tools and uses their data as inputs. Presently, the model covers several commercial and near-commercial biofuel routes and an emerging pathway for plastics upcycling. It covers temporal detail across four time-steps and is currently being expanded with a prospective modeling capability. The model has provided analyses for the Third Triennial Report to Congress (RtC3) on the environmental impacts of the Renewable Fuel Standard (RFS2), among others. As part of this project, NREL also provides scientific support to BETO in the International Energy Agency's Technology Collaboration Program on Bioenergy (IEA Bioenergy) Task 45 on Sustainability. Here, NREL evaluates and synthesizes activities that develop, compare, or apply metrics, methods, and tools to quantify sustainability effects of bioeconomy products. NREL also coordinates related national lab involvement and a BETO Working Group on Sustainable Land Management.

bioeconomy↗

Reactor physics studies for assessment of tramp uranium methods

This paper presents calculation studies towards validation of a methodology for estimations of the tramp uranium mass from water chemistry measurements. Particular emphasis is given to verify, from a reactor physics point of view, the justification basis for the so-called 'Pu-based model' versus the 'U-based model' as a key assumption for the methodology. The computational studies are carried out for a typical BWR fuel assembly with CASMO-5M and MCNPX. By approximating the evolution of fissile nuclides and the fraction of {sup 235}U fissions to total fissions in different zones of a fuel rod, including tramp uranium on the clad surface, it is found that Pu gives the dominant contribution to fissions for tramp uranium after an irradiation on the outer clad surface of at least one cycle in a BWR. Thus, the use of the so-called Pu model for the determination of the tramp uranium mass (this means in particular using the yields for {sup 239}Pu fission) appears justified in the cases considered. On that basis, replacing the older U model by a Pu model is recommended. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Distributed Model Identification Algorithm for Multi-Agent Systems: Preprint

In this study, we investigate agent-based approach for system model identification with emphasis on power distribution system applications. Departing from conventional practices of relying on historical data for offline model identification, we adopt online update approach utilizing real-time data by employing the latest data points for gradient computation. This methodology offers advantages including a large reduction in the communication network's bandwidth requirements by minimizing the data exchanged at each iteration and enabling the model to adapt in real-time to disturbances. Furthermore, we extend our model identification process from linear frameworks to more complex non-linear convex models. This extension is validated through numerical studies demonstrating improved control performance for a synthetic IEEE test case.

data-driven control↗

A Methodology to Consider Combined Electrical Infrastructure and Real-Time Power-Flow Impact Costs in Planning Large-Scale Renewable Energy Farms

The U.S federal government's strategic vision encouraging renewable energy production has motivated several new energy generation projects. Among them are large-scale renewable energy farm building efforts, where one considers the renewable resource potential along with land, equipment and installation costs. The goal in the planning phase of these efforts is to maximize the return on investment as well as the utilization of resources. The challenge, however, that is specific to integrating new generation is the need to include the operational (both construction as well as run-time) cost of introducing power to the existing infrastructure. In this paper, we propose a methodology to compute and include energy transmission line proximity (a construction time cost) and thermal-overload, and voltage out-of-range (an infrastructure cost) factors. Thus we consider both distance to infrastructure and the power-flow impacts when we plan to tap into an existing infrastructure. We present results for a simulation study over regions in Texas, Kansas, Colorado, New Mexico and Oklahoma and discuss the observations.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

An automated procedure for developing hybrid computer simulations of turbofan engines

A systematic, computer-aided, self-documenting methodology for developing hybrid computer simulations of turbofan engines is presented. The methodology makes use of a host program that can run on a large digital computer and a machine-dependent target (hybrid) program. The host program performs all of the calculations and date manipulations needed to transform user-supplied engine design information to a form suitable for the hybrid computer. The host program also trims the self contained engine model to match specified design point information. A test case is described and comparisons between hybrid simulation and specified engine performance data are presented.

Szuch, J. R.↗

Aeroacoustic Prediction Codes

This report describes work performed on Contract NAS3-27720AoI 13 as part of the NASA Advanced Subsonic Transport (AST) Noise Reduction Technology effort. Computer codes were developed to provide quantitative prediction, design, and analysis capability for several aircraft engine noise sources. The objective was to provide improved, physics-based tools for exploration of noise-reduction concepts and understanding of experimental results. Methods and codes focused on fan broadband and 'buzz saw' noise and on low-emissions combustor noise and compliment work done by other contractors under the NASA AST program to develop methods and codes for fan harmonic tone noise and jet noise. The methods and codes developed and reported herein employ a wide range of approaches, from the strictly empirical to the completely computational, with some being semiempirical analytical, and/or analytical/computational. Emphasis was on capturing the essential physics while still considering method or code utility as a practical design and analysis tool for everyday engineering use. Codes and prediction models were developed for: (1) an improved empirical correlation model for fan rotor exit flow mean and turbulence properties, for use in predicting broadband noise generated by rotor exit flow turbulence interaction with downstream stator vanes: (2) fan broadband noise models for rotor and stator/turbulence interaction sources including 3D effects, noncompact-source effects. directivity modeling, and extensions to the rotor supersonic tip-speed regime; (3) fan multiple-pure-tone in-duct sound pressure prediction methodology based on computational fluid dynamics (CFD) analysis; and (4) low-emissions combustor prediction methodology and computer code based on CFD and actuator disk theory. In addition. the relative importance of dipole and quadrupole source mechanisms was studied using direct CFD source computation for a simple cascadeigust interaction problem, and an empirical combustor-noise correlation model was developed from engine acoustic test results. This work provided several insights on potential approaches to reducing aircraft engine noise. Code development is described in this report, and those insights are discussed.

Gliebe, P↗

A design methodology for portable software on parallel computers

This final report for research that was supported by grant number NAG-1-995 documents our progress in addressing two difficulties in parallel programming. The first difficulty is developing software that will execute quickly on a parallel computer. The second difficulty is transporting software between dissimilar parallel computers. In general, we expect that more hardware-specific information will be included in software designs for parallel computers than in designs for sequential computers. This inclusion is an instance of portability being sacrificed for high performance. New parallel computers are being introduced frequently. Trying to keep one's software on the current high performance hardware, a software developer almost continually faces yet another expensive software transportation. The problem of the proposed research is to create a design methodology that helps designers to more precisely control both portability and hardware-specific programming details. The proposed research emphasizes programming for scientific applications. We completed our study of the parallelizability of a subsystem of the NASA Earth Radiation Budget Experiment (ERBE) data processing system. This work is summarized in section two. A more detailed description is provided in Appendix A ('Programming Practices to Support Eventual Parallelism'). Mr. Chrisman, a graduate student, wrote and successfully defended a Ph.D. dissertation proposal which describes our research associated with the issues of software portability and high performance. The list of research tasks are specified in the proposal. The proposal 'A Design Methodology for Portable Software on Parallel Computers' is summarized in section three and is provided in its entirety in Appendix B. We are currently studying a proposed subsystem of the NASA Clouds and the Earth's Radiant Energy System (CERES) data processing system. This software is the proof-of-concept for the Ph.D. dissertation. We have implemented and measured the performance of a portion of this subsystem on the Intel iPSC/2 parallel computer. These results are provided in section four. Our future work is summarized in section five, our acknowledgements are stated in section six, and references for published papers associated with NAG-1-995 are provided in section seven.

Nicol, David M.↗

Novel Relativistic Electronic Structure Theories for Actinide-Containing Compounds

Actinides of importance to basic energy sciences contain electrons moving at speed comparable to the speed of light. Reliable computational simulation of these electrons and hence actinide chemistry requires accurate description of relativistic effects. The present project advances computational actinide chemistry with development of new methodologies, algorithms, and computer programs in relativistic quantum chemistry, as well as applications to actinide chemistry and spectroscopy. A new “electrons-only” exact two-component approach has been developed to provide efficient treatments of relativistic effects, while maintaining chemical accuracy. New computational algorithms developed here extend the applicability of relativistic electron-correlation methods to larger molecules. The method-development work in this project also features the first implementation of analytic gradient technique for relativistic electron-correlation methods, which provides significantly enhanced ability to compute properties for molecules containing actinides. The applicability and usefulness of these new methods and computer programs have been demonstrated in calculations of actinide-containing molecules to facilitate understanding of actinide chemistry and spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of the propulsion cycles for advanced shuttles. II - Performance model methodology

In 1988 computer codes from NASA and DLR were combined to analyze and optimize rocket engines for advance launch vehicles. Further effort has addressed performance propulsion parameters such as chamber pressure, cycle selection (including mixed and tripropellant cycles), nozzle extension, and new technologies. Results of the study indicate that lower dry masses can be reached with the staged combustion cycle than with the gas-generator cycle, using oxygen/hydrogen at relatively high mixture ratio (7:1) and modest chamber pressure (220 bar). For low dry masses the staged combustion cycle is only excelled by the dual-expander cycle using hydrogen and propane as fuels. The emphasis here is to explain the procedure and boundary conditions used for the analysis and the variety of configurations treated, as well as to demonstrate the methods used by presenting some of the major results.

Manski, Detlef↗

Neural networks as a control methodology

While conventional computers must be programmed in a logical fashion by a person who thoroughly understands the task to be performed, the motivation behind neural networks is to develop machines which can train themselves to perform tasks, using available information about desired system behavior and learning from experience. There are three goals of this fellowship program: (1) to evaluate various neural net methods and generate computer software to implement those deemed most promising on a personal computer equipped with Matlab; (2) to evaluate methods currently in the professional literature for system control using neural nets to choose those most applicable to control of flexible structures; and (3) to apply the control strategies chosen in (2) to a computer simulation of a test article, the Control Structures Interaction Suitcase Demonstrator, which is a portable system consisting of a small flexible beam driven by a torque motor and mounted on springs tuned to the first flexible mode of the beam. Results of each are discussed.

Mccullough, Claire L.↗

Fault-free performance validation of avionic multiprocessors

This paper describes the application of a portion of a validation methodology to NASA's Fault-Tolerant Multiprocessor System (FTMP) and the Software Implemented Fault-Tolerance (SIFT) computer system. The methodology entails a building block approach, starting with simple baseline experiments and building to more complex experiments. The goal of the validation methodology is to thoroughly test and characterize the performance and behavior of ultrareliable computer systems. The validation methodology presented in this paper showed that the methodology is not machine specific and can be used in lieu of life testing approaches. By applying a building block approach at the systems level, the machine complexity was broken down to manageable levels independent of system implementation.

Czeck, Edward W.↗

Signal and Power Integrity Design Methodology for High-Performance Flight Computing Systems

Computing capabilities of space systems have in-creased onboard performance by orders of magnitude with the use of radiation-tolerant field-programmable gate arrays (FPGA)and processors. The incorporation of signal and power integrity analysis with printed circuit board (PCB) design in reliable computing architectures for space systems has become critical to enable future mission capabilities. Developers launch high-performance processors into a breadth of orbits and missions, running varying applications that create challenges for designing reliable computing hardware. Specifically, for these designs, academic and industry research has focused on component radiation performance, fault mitigation, and reliable architectures. How-ever, other design parameters including electromagnetic interference (EMI), PCB stackup, signal integrity (SI), voltage regulator module (VRM) design, and power distribution network (PDN)are often deprioritized or disregarded as the design matures. Since these characteristics are becoming more significant in high-performance processor designs, this research presents a hardware design and analysis methodology for high-performance, space-computing systems that focuses on a holistic design approach and PDN reliability. While these challenges exist across all space hardware, the reduced PCB dimensions imposed by SmallSats and CubeSats introduce additional hurdles, specifically to VRM and decoupling design. By examining the relationship between the PDN and radiation performance, an analytical relationship is developed that incorporates Total Ionizing Dose and Single-Event Transients to ensure reliability throughout the mission duration. The presented design methodology is applied to the SpaceCube v3.0 Mini, an FPGA-based on-board science data processing system developed at NASA Goddard Space Flight Center.

Advanced avionics↗

Quantification of uncertainties in composites

An integrated methodology is developed for computationally simulating the probabilistic composite material properties at all composite scales. The simulation requires minimum input consisting of the description of uncertainties at the lowest scale (fiber and matrix constituents) of the composite and in the fabrication process variables. The methodology allows the determination of the sensitivity of the composite material behavior to all the relevant primitive variables. This information is crucial for reducing the undesirable scatter in composite behavior at its macro scale by reducing the uncertainties in the most influential primitive variables at the micro scale. The methodology is computationally efficient. The computational time required by the methodology described herein is an order of magnitude less than that for Monte Carlo Simulation. The methodology has been implemented into the computer code PICAN (Probabilistic Integrated Composite ANalyzer). The accuracy and efficiency of the methodology/code are demonstrated by simulating the uncertainties in the heat-transfer, thermal, and mechanical properties of a typical laminate and comparing the results with the Monte Carlo simulation method and experimental data. The important observation is that the computational simulation for probabilistic composite mechanics has sufficient flexibility to capture the observed scatter in composite properties.

Liaw, D. G.↗

Advanced reliability modeling of fault-tolerant computer-based systems

Two methodologies for the reliability assessment of fault tolerant digital computer based systems are discussed. The computer-aided reliability estimation 3 (CARE 3) and gate logic software simulation (GLOSS) are assessment technologies that were developed to mitigate a serious weakness in the design and evaluation process of ultrareliable digital systems. The weak link is based on the unavailability of a sufficiently powerful modeling technique for comparing the stochastic attributes of one system against others. Some of the more interesting attributes are reliability, system survival, safety, and mission success.

Bavuso, S. J.↗

Thermal Hydraulics Design and Analysis Methodology for a Solid-Core Nuclear Thermal Rocket Engine Thrust Chamber

Nuclear thermal propulsion is a leading candidate for in-space propulsion for human Mars missions. This chapter describes a thermal hydraulics design and analysis methodology developed at the NASA Marshall Space Flight Center, in support of the nuclear thermal propulsion development effort. The objective of this campaign is to bridge the design methods in the Rover/NERVA era, with a modern computational fluid dynamics and heat transfer methodology, to predict thermal, fluid, and hydrogen environments of a hypothetical solid-core, nuclear thermal engine the Small Engine, designed in the 1960s. The computational methodology is based on an unstructured-grid, pressure-based, all speeds, chemically reacting, computational fluid dynamics and heat transfer platform, while formulations of flow and heat transfer through porous and solid media were implemented to describe those of hydrogen flow channels inside the solid24 core. Design analyses of a single flow element and the entire solid-core thrust chamber of the Small Engine were performed and the results are presented herein

Wang, Ten-See↗

Software for Probabilistic Risk Reduction

A computer program implements a methodology, denoted probabilistic risk reduction, that is intended to aid in planning the development of complex software and/or hardware systems. This methodology integrates two complementary prior methodologies: (1) that of probabilistic risk assessment and (2) a risk-based planning methodology, implemented in a prior computer program known as Defect Detection and Prevention (DDP), in which multiple requirements and the beneficial effects of risk-mitigation actions are taken into account. The present methodology and the software are able to accommodate both process knowledge (notably of the efficacy of development practices) and product knowledge (notably of the logical structure of a system, the development of which one seeks to plan). Estimates of the costs and benefits of a planned development can be derived. Functional and non-functional aspects of software can be taken into account, and trades made among them. It becomes possible to optimize the planning process in the sense that it becomes possible to select the best suite of process steps and design choices to maximize the expectation of success while remaining within budget.

Hensley, Scott↗