Search NASA⌕ Search

SEARCH · Search NASA

Results for “Contrast Sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Recent Amplified Global Gross Primary Productivity Due to Temperature Increase is Offset by Reduced Productivity Due to Water Constraints

Satellite remote sensing observationsshow an increased greenness trend over land in recent decades. Whilegreennessobservationscanindicateincreased productivity, estimation of total annual productivity is highly dependent on vegetation response to climate and environmental conditions. Models have been struggling to determinehow much carbon is taken up by plants as a result of increased atmospheric CO2fertilization. Current remote sensing light use efficiency (LUE) models contain considerable uncertainty due to the lack of spatial and temporal variability in maximum LUE parameter and climate sensitivity defined for global plantfunctional types (PFTs). We usedthe optimum LUE (LUEopt) previously derived fromtheglobal FLUXNET network to improve estimation of global gross primary productivity (GPP)for the period 1982–2016. Our results indicateincreasing GPP in northern latitudesowing to reduced cold temperature constraintson plant growth, thereby suggesting increasing negative carbon-climate feedbackin high latitudes. In the tropics, by contrast, our results indicate an emerging positive climate feedback,mainly due to increasing atmospheric vapor pressure deficit(VPD).Further pervasive VPD increase is likely to continue to reduce global GPPand amplify carbon emissions.

Climate change↗

Atmospheric Energy Spectra in Global Kilometre-Scale Models

Eleven 40-day long integrations of five different global models with horizontal resolutions of less than 9 km are compared in terms of their global energy spectra. The method of normal-mode function decomposition is used to distinguish between balanced (Rossby wave; RW) and unbalanced (inertia-gravity wave; IGW) circulation. The simulations produce the expected canonical shape of the spectra, but their spectral slopes at mesoscales, and the zonal scale at which RW and IGW spectra intersect differ significantly. The partitioning of total wave energies into RWs an IGWs is most sensitive to the turbulence closure scheme and this partitioning is what determines the spectral crossing scale in the simulations, which differs by a factor of up to two. It implies that care must be taken when using simple spatial filtering to compare gravity wave phenomena in storm-resolving simulations, even when the model horizontal resolutions are similar. In contrast to the energy partitioning between the RWs and IGWs, changes in turbulence closure schemes do not seem to strongly affect spectral slopes, which only exhibit major differences at mesoscales. Despite their minor contribution to the global (horizontal kinetic plus potential available) energy, small scales are important for driving the global mean circulation. Our results support the conclusions of previous studies that the strength of convection is a relevant factor for explaining discrepancies in the energies at small scales. The models studied here produce the major large-scale features of tropical precipitation patterns. However, particularly at large horizontal wavenumbers, the spectra of upper tropospheric vertical velocity, which is a good indicator for the strength of deep convection, differ by factors of three or more in energy. High vertical kinetic energies at small scales are mostly found in those models that do not use any convective parameterisation.

DYAMOND↗

High-Contrast 3.8 Micron Imaging of the Brown Dwarf/Planet-Mass Companion to GJ 758

We present L' band (3.8 Micron) MMT/Clio high-contrast imaging data for the nearby star GJ 758, which was recently reported by Thalmann et al. (2009) to have one -- possibly two-- faint comoving companions (GJ 7588 and "C", respectively). GJ 758B is detected in two distinct datasets. Additionally, we report a \textit(possible) detection of the object identified by Thalmann et al as "GJ 758C" in our more sensitive dataset, though it is likely a residual speckle. However, if it is the same object as that reported by Thalmann et al. it cannot be a companion in a bound orbit. GJ 758B has a H-L'color redder than nearly all known L--T8 dwarfs. Based on comparisons with the COND evolutionary models, GJ 758B has Te approx. 560 K (+150 K, -90 K) and a mass ranging from approx. 10-20 Mj if it is approx. 1 Gyr old to approx. 25-40 Mj if it is 8.7 Gyr old. GJ 758B is likely in a highly eccentric orbit, e approx. 0.73 (+0.12,-0.21), with a semimajor axis of approx. 44 AU (+32 AU, -14 AU). Though GJ 758B is sometimes discussed within the context of exoplanet direct imaging, its mass is likely greater than the deuterium-burning limit and its formation may resemble that of binary stars rather than that of jovian-mass planets.

Currie, Thayne↗

High-Contrast 3.8 Micron Imaging of the Brown Dwarf/Planet-Mass Companion to GJ 758

We present L' band (3.8 Micron) MMT/Clio high-contrast imaging data for the nearby star GJ 758, which was recently reported by Thalmann et al. (2009) to have one - possibly two - faint comoving companions (GJ 7588 and "C", respectively). GJ 758B is detected in two distinct datasets. Additionally, we report a \textit{possible} detection of the object identified by Thalmann et al as "GJ 758C" in our more sensitive dataset, though it is likely a residual speckle. However, if it is the same object as that reported by Thalmann et al. it cannot be a companion in a bound orbit. GJ 7588 has a H-L' color redder than nearly all known L-T8 dwarfs. 8ased on comparisons with the COND evolutionary models, GJ 7588 has Te approx. 560 K (+150 K, -90 K) and a mass ranging from approx.10-20 Mj if it is approx.1 Gyr old to approx. 25-40 Mj if it is 8.7 Gyr old. GJ 7588 is likely in a highly eccentric orbit, e approx. 0.73 (+0.12,-0.21), with a semimajor axis of approx. 44 AU (+32 AU, -14 AU). Though GJ 7588 is sometimes discussed within the context of exoplanet direct imaging, its mass is likely greater than the deuterium-burning limit and its formation may resemble that of binary stars rather than that of jovian-mass planets.

Currie, Thayne M.↗

Magnetic petrology of eastern North America diabases. I - Olivine-normative dikes from western South Carolina

The oxide mineralogy and the magnetic behavior of 15 olivine-normative samples obtained from South-Caroline diabase dikes were investigated using electron microprobe and SEM analyses and measurements of natural remanence magnetization (NRM), saturation isothermal remanence magnetization (SIRM), and anhysteritic remanence magnetization. It was found that chromite (which for these olivine-normative diabases is a sensitive petrologic indicator) constitutes up to 0.5 vol pct and that its abundance and composition correlate with bulk rock Cr. Microscopic analyses showed that titanomagnetite compositions were mostly between 0.4 and 0.55. The values of NRM and the NRM/SIRM ratios varied between 4 and 0.01 A sq m/kg and 0.0019 and 0.032, respectively. These properties inversely correlate with Cr content and demonstrably contrast Cr-rich and Cr-poor samples.

Warner, Richard D.↗

Mapping the stellar backbones of spiral galaxies

We present optical and IR surface photometry of M51 (NGC 5194) at B, V, R, I, J, K, and CO. These data are used to establish whether K-band images of spiral galaxies provide reliable maps of stellar surface mass density features such as massive spiral arms or bars. The main distorting agents in the mapping at shorter wavelengths are dust extinction and luminous young stars. From modeling the color changes across the main dust lanes in M51, we find the optical depths to be about 0.5 in the K band. For these optical depths the K-band flux is attenuated by only less than 10 percent even in the dust lanes. From monitoring the gravity-sensitive CO index across the spiral arms we find that young red supergiants do not significantly distort the K-band image. On this basis, we conclude that K-band images do trace the massive disk star population and allow to map azimuthal variation in the surface mass density of the stellar disk. In M51 we find the surface mass density contrast to range from 1.8 to 3, as expected from N-body simulations of the galaxy's tidal encounter with NGC 5195. The spiral arm amplitude in M51 clearly shows smooth, strong radial variations, with a maximum at about 130 arcsec and minima at 45 and 170 arcsec.

Rix, Hans-Walter↗

Unconventional Imaging with Contained Granular Media

Typically, the cost of a space-borne imaging system is driven by the size and mass of the primary aperture. The solution that we propose uses a method to construct an imaging system in space in which the nonlinear optical properties of a cloud of micron-sized particles, shaped into a specific surface by electromagnetic means, and allows one to form a very large and lightweight aperture of an optical system, hence reducing overall mass and cost. Recent work at JPL has investigated the feasibility of a granular imaging system, concluding that such a system could be built and controlled in orbit. We conducted experiments and simulation of the optical response of a granular lens. In all cases, the optical response, measured by the Modulation Transfer Function, of hexagonal reflectors was closely comparable to that of a conventional spherical mirror. We conducted some further analyses by evaluating the sensitivity to fill factor and grain shape, and found a marked sensitivity to fill factor but no sensitivity to grain shape. We have also found that at fill factors as low as 30%, the reflection from a granular lens is still excellent. Furthermore, we replaced the monolithic primary mirror in an existing integrated model of an optical system (WFIRST Coronagraph) with a granular lens, and found that the granular lens that can be useful for exoplanet detection provides excellent contrast levels. We will present our testbed and simulation results in this paper.

Sidick, Erkin↗

What is the source of observed annual variations in plasmaspheric density?

Plasmaspheric densities have been observed previously to be higher in December than in June, with the ratio varying between 1.5 and 3.0 and with larger variations at lower L shells. In order to search for the cause of the observed annual variations, we have modeled plasmaspheric density, using a time-dependent hydrodynamic model. On an L = 2 field line with geomagnetic longitude equal to 300 deg, the modeled plasmaspheric densities were a factor of 1.5 times higher in December than in June. The modeled December to June density ratio was found to increase slightly with L shell, in contrast to observations; this discrepancy may be due to the fact that outer plasmaspheric flux tubes are never completely full. In addition, for an L = 2 field line with geomagnetic longitude equal to 120 deg, the modeled plasmaspheric density was higher in June than in December by a factor of about 1.2. Various numerical tests were also performed in order to examine the sensitivity of plasmaspheric density to various parameters. In particular, a large vertical neutral wind was applied in order to raise the O(+) profile which had the effect of raising plasmaspheric density by a factor of 6. This in conjunction with a theoretical analysis suggests that plasmaspheric density levels are very sensitive to O(+) levels in the upper ionosphere. We conclude that annual variations in plasmaspheric density are due to similar variations in ionospheric O(+).

Guiter, S. M.↗

NASA Tech Briefs, October 2005

Topics covered include: Insect-Inspired Optical-Flow Navigation Sensors; Chemical Sensors Based on Optical Ring Resonators; A Broad-Band Phase-Contrast Wave-Front Sensor; Progress in Insect-Inspired Optical Navigation Sensors; Portable Airborne Laser System Measures Forest-Canopy Height; Deployable Wide-Aperture Array Antennas; Faster Evolution of More Multifunctional Logic Circuits; Video-Camera-Based Position-Measuring System; N-Type delta Doping of High-Purity Silicon Imaging Arrays; Avionics System Architecture Tool; Updated Chemical Kinetics and Sensitivity Analysis Code; Predicting Flutter and Forced Response in Turbomachinery; Upgrades of Two Computer Codes for Analysis of Turbomachinery; Program Facilitates CMMI Appraisals; Grid Visualization Tool; Program Computes Sound Pressures at Rocket Launches; Solar-System Ephemeris Toolbox; Data-Acquisition Software for PSP/TSP Wind-Tunnel Cameras; Corrosion-Prevention Capabilities of a Water-Borne, Silicone-Based, Primerless Coating; Sol-Gel Process for Making Pt-Ru Fuel-Cell Catalysts; Making Activated Carbon for Storing Gas; System Regulates the Water Contents of Fuel-Cell Streams; Five-Axis, Three-Magnetic-Bearing Dynamic Spin Rig; Modifications of Fabrication of Vibratory Microgyroscopes; Chamber for Growing and Observing Fungi; Electroporation System for Sterilizing Water; Thermoelectric Air/Soil Energy-Harvesting Device; Flexible Metal-Fabric Radiators; Actuated Hybrid Mirror Telescope; Optical Design of an Optical Communications Terminal; Algorithm for Identifying Erroneous Rain-Gauge Readings; Condition Assessment and End-of-Life Prediction System for Electric Machines and Their Loads; Lightweight Thermal Insulation for a Liquid-Oxygen Tank; Stellar Gyroscope for Determining Attitude of a Spacecraft; and Lifting Mechanism for the Mars Explorer Rover.

Source record↗

Determination of the aerosol content in the atmosphere from ERTS-1 data

The ERTS-1 satellite offered the opportunity of determining the feasibility of monitoring the atmospheric aerosol optical thickness on a global basis, as suggested by theoretical studies, which showed relationships between the upwelling earth-atmosphere radiance and the aerosol optical thickness, and between contrast and the aerosol optical thickness. These relationships were investigated at two test sites, using the multispectral scanner (MSS) radiance data, with ground-truth observations of the aerosol optical thickness being made with a Volz photometer at the time of the satellite overpasses. The results indicate that the MSS channels, 4, 5, and 6, centered at 0.55, 0.65, and 0.75 micron have comparable sensitivity, and that the optical thickness can be determined to within plus or minus 10% with the assumed measurement errors of the MSS.

Griggs, M.↗

Ultraluminous starbursts in major mergers

We use numerical simulation to investigate the triggering of starbursts in merging disk galaxies. The properties of the merger-driven starbursts are sensitive to the structure of the progenitor galaxies; specifically, to the amount of material in a dense central bulge. Galaxies without bulges develop bars shortly after their first close passage, driving significant gas inflow and subsequent starbursts in the centers of the galaxies. These starbursts significantly deplete the star-forming gas, so that only relatively weak starbursts arise during the final merger. By contrast, models of galaxies with central bulges show that a bulge acts to stabilize the galaxies against inflow and starbursts until the galaxies actually merge. At this time, strong dissipation leads to the formation of a massive central gas mass and an ensuing star-formation rate two orders of magnitude greater than that in our isolated disk models. These starbursts are very short in duration, typically approximately 50 Myr, suggesting that the rarity of ultraluminous infrared galaxies is a result of their being in a very short evolutionary phase, rather than special and rare formation conditions. The fact that these mergers display many of the properties of ultraluminous infrared galaxies--tidal features, double nuclei, massive compact gas concentrations, and extreme levels of starburst activity--suggets that merger-driven starbursts can explain the emission from many ultraluminous infrared galaxies without an active nucleus.

Mihos, J. Christopher↗

Multiple Etalon Systems for the Advanced Technology Solar Telescope

Multiple etalons systems are discussed that meet the 4-meter NSO/Advance Technology Solar Telescope (http://www.nso.edu/ATST/index.html) instrument and science requirements for a narrow bandpass imaging system. A multiple etalon system can provide an imaging interferometer working in four distinct modes: as a spectro-polarimeter, a filter-vector magnetograph, and a wide-band and broad-band high-resolution imager. Specific dual and triple etalon configurations will be described that provides spectrographic passband of 2.0-3.5nm and reduces parasitic light levels to 1/10000 as required by precise polarization measurement, e.g., Zeeman measurements of magnetic sensitive lines. A TESOS-like triple etalon system provides for spectral purity of 100 thousandths. The triple designs have the advantage of reducing the finesse requirement on each etalon, allowing much more stable blocking filters, and can have very high spectral purity. A dual-etalon double-pass Cavallini-like configuration can provide a competing configuration. This design can provide high contrast with only a double etalon. The selection of the final focal plan instrument will depend on a trade-off of the ideal instrument versus reality, the number of etalons, the aperture of etalons, the number of blocking filters the electronic control system and computer interfaces, the temperature control and controllers for the etalons and the electronics. The use of existing experience should provide significant cost savings. The heritage of use of etalons and multiple etalon systems in solar physics come from a number of observatories, which includes MSFC Solar Observatory (NASA), Sac Peak Observatory (NSO), and Kiepenheuer Institute for Solar Physics (Germany), Mees Solar Observatory (University of Hawaii), and Arcetri Astrophysical Observatory (Italy). The design of the ATST multiple etalon system will reply on the existing experience from these observatories.

Gary, G. Allen↗

Immune alterations in male and female mice after 2-deoxy-D-glucose administration

Administration of 2-deoxy-D-glucose (2-DG) induces acute cellular glucoprivation. In the current study, we examined differences in immune parameters after 2-DG administration in both sexes. Male and female BDF1 mice were injected three times, 48 h apart, either with a saline solution (control group) or with 2-DG in saline (500 mg/kg). Two hours after the last injection, blood and spleens were collected. Plasma levels of interleukin-1beta, and interferon-gamma levels were measured. Additionally, the levels of the specific leukocyte antigens CD3, CD4, CD8, T cell receptor (TCR) alpha/beta, I-Ad, and H-2Ld/H-2Db were evaluated by flow cytometry on both blood and spleen cells. The blastogenic response of leukocytes from both tissues to mitogens was assessed. Levels of glucose, corticosterone, testosterone, progesterone, 17beta-estradiol, follicle-stimulating hormone, and luteinizing hormone were also determined. Increases in the percentage of cells bearing TCR alpha/beta and I-Ad in the blood and H-2Ld/H-2Db in the spleen were observed in the 2-DG-treated group for both sexes. In contrast, higher corticosterone and IL-1beta plasma concentrations, as well as higher percentages of splenocytes bearing TCR alpha/beta and I-Ad, and lower mitogen-induced proliferation of mature T splenocytes (79%) were observed in female but not in male mice injected with 2-DG compared with those injected with saline (p < 0.05). Taken together, these results suggest that female mice are more sensitive than male mice to immune alterations induced by 2-DG administration.

Non-NASA Center↗

Sensitivity of Inherent Optical Properties from Ocean Reflectance Inversion Models to Satellite Instrument Wavelength Suites

The Earth science community seeks to develop climate data records (CDRs) from satellite measurements of ocean color, a continuous data record that now exceeds 20 years. Space agencies will launch additional instruments in the coming decade that will continue this data record, including the NASA PACE spectrometer. Inherent optical properties (IOPs) quantitatively describe the absorbing and scattering constituents of seawater and can be estimated from satellite-observed spectroradiometric data using semi-analytical algorithms (SAAs). SAAs exploit the contrasting optical signatures of constituent matter at spectral bands observed by satellite sensors. SAA performance, therefore, depends on the spectral resolution of the satellite spectroradiometer. A CDR spanning SeaWiFS, MODIS, OLCI, and PACE, for example, would include IOPs derived using varied wavelength suites if all available wavelengths were considered. Here, we explored differences in derived IOPs that stem simply from the use of (eight) different wavelength suites of input radiometric measurements. Using synthesized data and SeaWiFS Level-3 mission-long composites, we demonstrated equivalent SAA performance for all wavelength suites, but that IOP retrievals vary by several percent across wavelength suites and as a function of water type. The differences equate to roughly ≤ 6, 12, and 7% for a(sub dg)(443), a(sub ph)(443), and b(sub bp)(443), respectively, for waters with C(sub a) ≤ 1 mg -cu m. These values shrink for sensors with similar wavelength suites (e.g., SeaWiFS, MODIS, and MERIS) and rise to substantially larger values for higher C(sub a) waters. Our results also indicate that including 400 nm (in the case of OLCI) influences the derived IOPs, using longer wavelengths (>600 nm) influences the derived IOPs when there is a red signal, and, including additional spectral information shows potential for improved IOP estimation, but not without revisiting SAA parameterizations and execution. While modest in scope, we believe this study contributes to the knowledge base for CDR development. The implication of ignoring such an analysis as CDRs continue to be developed is a prolonged inability to distinguish between algorithmic and environmental contributions to trends and anomalies in the IOP time-series.

ocean color satellites↗

Normalization of multidirectional red and NIR reflectances with the SAVI

Directional reflectance measurements were made over a semi-desert gramma grassland at various times of the growing season. View angle measurements from +40 to -40 degrees were made at various solar zenith angles and soil moisture conditions. The sensitivity of the Normalized Difference Vegetation Index (NDVI) and the Soil Adjusted Vegetation Index (SAVI) to bidirectional measurements was assessed for purposes of improving remote temporal monitoring of vegetation dynamics. The SAVI view angle response was found to be symmetric about nadir while the NDVI response was strongly anisotropic. This enabled the view angle behavior of the SAVI to be normalized with a cosine function. In contrast to the NDVI, the SAVI was able to minimize soil moisture and shadow influences for all measurement conditions.

Huete, A. R.↗

Use of AIRSAR to identify woody shrub invasion and other indicators of desertification in the Jornada LTER

The replacement of semidesert grassland by woody shrubland is a widespread form of desertification. This change in physiognomy and species composition tends to sharply reduce the productivity of the land for grazing by domestic livestock, increase soil erosion and reduce soil fertility, and greatly alter many other aspects of ecosystem structure and functioning. Remote sensing methods are needed to assess and monitor shrubland encroachment. Detection of woody shrubs at low density would provide a particularly useful baseline on which to access changes, because an initially low shrub density often tends to increase even after cessation of the disturbance (e.g., overgrazing, drought, or fire suppression) responsible for triggering the initial stages of the invasion (Grover and Musick, 1990). Limited success has been achieved using optical remote sensing. In contrast to other forms of desertification, biomass does not consistently decrease with a shift from grassland to shrubland. Estimation of green vegetation amount (e.g., by NDVI) is thus of limited utility, unless the shrubs and herbaceous plants differ consistently in phenology and the area can be viewed during a season when only one of these is green. The objective of this study was to determine if the potential sensitivity of active microwave remote sensing to vegetation structure could be used to assess the degree of shrub invasion of grassland. Polarimetric Airborne Synthetic Aperture Radar (AIRSAR) data were acquired for a semiarid site containing varied mixtures of shrubs and herbaceous vegetation and compared with ground observations of vegetation type and other landsurface characteristics. In this preliminary report we examine the response of radar backscatter intensity to shrub density. The response of other multipolarization parameters will be examined in future work.

Musick, H. Brad↗

Improved Processing Techniques for Inclusion-Free Steel for Bearing and Mechanical Component Applications

High hardness, high carbide powder metallurgy tools steels such as M62 enable the operation of ball bearings at extremely high load and stress levels. Operation under such conditions increases the potential for rolling contact fatigue failure attributed to ceramic particle inclusions. To address this challenge, industry has sought steel made from ever increasing levels of cleanliness but the results have been uneven owing to the random nature of the occurrence of material flaws. One common approach is to rely upon careful ingot inspections prior to bearing manufacture. By selecting the cleanest portion of an ingot, it is expected that bearings relatively free from material flaws will result. This approach is not always successful because detrimental flaws that exist deep within an ingot can pass inspection undetected potentially causing subsequent failure. Recent efforts to commercialize an intermetallic material, 60NiTi, for rolling element bearings demonstrates a pathway to produce bearing steel that is free from unwanted ceramic particle inclusions. In this paper, the process used to make bearing grade ceramic-free NiTi alloys is described and applied to steelmaking. At its core, the NiTi process differs from steel making in one key aspect. NiTi alloys are made from elementally pure starting materials that are melted, blended and processed in equipment absolutely free from exposure to oxygen and ceramics ensuring a ceramic particle-free product. In contrast, the predominant method to make bearing steel is to employ a successive series of purification steps to reduce contamination levels below required thresholds. This paper describes the processes developed and applied to high carbide tool steel, M62. The resulting material and microstructures are evaluated and compared to M62 prepared by conventional powder metallurgy techniques. It is hoped that the application of materials manufacturing techniques used for fracture sensitive ceramics and intermetallic materials like NiTi can provide a pathway to Ultra-Clean, Ceramic-Inclusion free steels for rolling element bearings and other failure critical applications.

Steel↗

A measurement of stratospheric HO2 by ground-based millimeter-wave spectroscopy

Stratospheric perhydroxyl (HO2) was measured by using a sensitive mm-wave receiver to obtain spectroscopic line profiles of three rotational emission lines in the vicinity of 265.8 GHz. The observations were carried out over four days in September-October 1982 at Mauna Kea, Hawaii and yield good agreement with the column density and vertical distribution predicted above 35 km by three representative two-dimensional photochemical models employing JPL 82-57 reaction rates and chemistry. Contrasts between current theoretical predictions and previous observations by Anderson et al. (1981) are pointed out for HO2 in the 28 to 37-km range, along with the difficulty of joining the latter with the present measurements through a monotonically varying vertical profile for HO2. A possible explanation involving strong temporal and spatial variation in stratospheric water vapor content is suggested.

De Zafra, R. L.↗