SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Approximately 42 project summaries from NASA's Space Biology Program are presented. Emphasis is placed on gravitational effects on plant and animal life. The identification of gravity perception; the effects of weightlessness on genetic integrity, cellular differentiation, reproduction, development, growth, maturation, and senescence; and how gravity affects and controls physiology, morphology, and behavior of organisms are studied.
The thermal analysis and the calculation of thermal sensitivity of a cure cycle in autoclave processing of thick composite laminates were studied. A finite element program for the thermal analysis and design derivatives calculation for temperature distribution and the degree of cure was developed and verified. It was found that the direct differentiation was the best approach for the thermal design sensitivity analysis. In addition, the approach of the direct differentiation provided time histories of design derivatives which are of great value to the cure cycle designers. The approach of direct differentiation is to be used for further study, i.e., the optimal cycle design.
Consideration is given to a family of convex programming problems which depend on a vector parameter. It is shown that the solutions of the problems and the associated Lagrange multipliers are arbitrarily many times directionally differentiable functions of the parameter, provided that the data of the problems are sufficiently regular. The characterizations of the respective derivatives are given.
The NASA Space Station Program includes development of a polar orbiting platform as part of the Earth Observing System (EOS) Program. A lidar facility is in turn being developed for the EOS polar platforms to make atmospheric science measurements utilizing techniques of laser atmospheric backscatter (optical radar), Differential Absorption Lidar (DIAL) and altimetry. The science for this facility has been developed by the Lidar Atmospheric Sounder and Altimetry (LASA) panel for the Earth Observing System and will be addressed in an Announcement of Opportunity which will be released early in 1988 to solicit science proposals and experiment proposals for the EOS missions.
The U.S. National Aeronautics and Space Administration (NASA) Balloon Program continues to support the scientific community providing enhanced capabilities across a spectrum of balloon related disciplines. Long Duration Ballooning (LDB) continues to be a prominent element of the program with a mission model of a two flight campaign in each the Northern and Southern Hemispheres per year. A new LDB endurance record was achieved in Antarctica with the LDB/CREAM mission. Both polar and mid-latitude LDB capabilities continue to be on-going operational elements of the flight program. The Swedish Space Corporation/Esrange and the National Aeronautics and Space Administration (NASA) inaugurated a joint European/U.S. capability for LDB balloon flights from Sweden to Canada in June 2005. This will complement the NASA/U.S. National Science Foundation Office of Polar Programs achievement of more than a decade of successful long-duration flights around Antarctica. Most of Antarctic flights have flown one time around the South Pole in 8-20 days using conventional (zero differential pressure) balloons. One flight went twice around in 31 days and another went three times around in 42 days using conventional balloons. Balloon technology efforts have continued to broaden in scope and new plans for activities to provide advancements have been initiated. A new balloon volume record was established with the successful flight of a 1,700,000 m3 volume zero-pressure balloon. The capability to fly a 700 kg payload (200 kg science instrument) to 160,000 ft has also been demonstrated. A new super-pressure (constant volume) balloon is currently under development for future flights of 60 - 100 day at any latitude. The Ultra-Long Duration Balloon (ULDB) project for the development of a 100-day duration balloon capability has been progressing with additional ground and flight tests having been conducted. The Program has also continued to introduce new technology and improvements into flight systems, ground systems and operational techniques. An overview of the various aspects of the NASA Balloon Program will be presented as well as the outlook for the future.
A direct optimization method based on differential inclusion concepts has been developed and used to compute low thrust trajectories. This new formulation removes explicit control dependence from the problem statement thereby reducing the dimension of the parameter space of the resulting nonlinear programming problem. A simple example of a two-dimensional gravity-free trajectory involving a maximum velocity transfer to a rectilinear path is discussed. Three interplanetary trajectory examples, an Earth-Mars constant specific impulse transfer, and Earth-Jupiter constant specific impulse transfer, and an Earth-Venus-Mars variable specific impulse gravity assist, are also included. An analysis of the technique's performance is provided.
Each of the three state of the art instruments flown aboard NASA's Cosmic Background Explorer (COBE) were designed, fabricated, and integrated using unique contamination control procedures to ensure accurate characterization of the diffuse radiation in the universe. The most stringent surface level cleanliness specifications ever attempted by NASA were required by the Diffuse Infrared Background Experiment (DRIBE) which is located inside a liquid helium cooled dewar along with the Far Infrared Absolute Spectrophotometer (FIRAS). The DRIBE instrument required complex stray radiation suppression that defined a cold primary optical baffle system surface cleanliness level of 100A. The cleanliness levels of the cryogenic FIRAS instrument and the Differential Microwave Radiometer (DMR) which were positioned symmetrically around the dewar were less stringent ranging from 300 to 500A. To achieve these instrument cleanliness levels, the entire flight spacecraft was maintained at level 500A throughout each phase of development. The COBE contamination control program is described along with the difficulties experienced in maintaining the cleanliness quality of personnel and flight hardware throughout instrument assembly.
Each of the three state of the art instruments flown aboard NASA's Cosmic Background Explorer (COBE) were designed, fabricated, and integrated using unique contamination control procedures to ensure accurate characterization of the diffuse radiation in the universe. The most stringent surface level cleanliness specifications ever attempted by NASA were required by the Diffuse Infrared Background Experiment (DRIBE) which is located inside a liquid helium cooled dewar along with the Far Infrared Absolute Spectrophotometer (FIRAS). The DRIBE instrument required complex stray radiation suppression that defined a cold primary optical baffle system surface cleanliness level of 100A. The cleanliness levels of the cryogenic FIRAS instrument and the Differential Microwave Radiometer (DMR) which were positioned symmetrically around the dewar were less stringent ranging from 300 to 500A. To achieve these instrument cleanliness levels, the entire flight spacecraft was maintained at level 500A throughout each phase of development. The COBE contamination control program is described along with the difficulties experienced in maintaining the cleanliness quality of personnel and flight hardware throughout instrument assembly.
Two versions of a real-time digital-computer program that operates a fighter airplane interactively against a human pilot in simulated air combat were evaluated. They function by replacing one of two pilots in the Langley differential maneuvering simulator. Both versions make maneuvering decisions from identical information and logic; they differ essentially in the aerodynamic models that they control. One is very complete, but the other is much simpler, primarily characterizing the airplane's performance (lift, drag, and thrust). Both models competed extremely well against highly trained U.S. fighter pilots.
Simulation tools for the large deployable reflector (LDR) are discussed. These tools are often the transfer function variety equations. However, transfer functions are inadequate to represent time-varying systems for multiple control systems with overlapping bandwidths characterized by multi-input, multi-output features. Frequency domain approaches are the useful design tools, but a full-up simulation is needed. Because of the need for a dedicated computer for high frequency multi degree of freedom components encountered, non-real time smulation is preferred. Large numerical analysis software programs are useful only to receive inputs and provide output to the next block, and should be kept out of the direct loop of simulation. The following blocks make up the simulation. The thermal model block is a classical heat transfer program. It is a non-steady state program. The quasistatic block deals with problems associated with rigid body control of reflector segments. The steady state block assembles data into equations of motion and dynamics. A differential raytrace is obtained to establish a change in wave aberrations. The observation scene is described. The focal plane module converts the photon intensity impinging on it into electron streams or into permanent film records.
With flexible leaded parts, the solder-joint failure process involves a complex interplay of creep and fatigue mechanisms. To better understand the role of creep in typical multi-hour cyclic loading conditions, a specialized non-linear finite-element creep simulation computer program has been formulated. The numerical algorithm includes the complete part-lead-solder-PWB system, accounting for strain-rate dependence of creep on applied stress and temperature, and the role of the part-lead dimensions and flexibility that determine the total creep deflection (solder strain range) during stress relaxation. The computer program has been used to explore the effects of various solder creep-fatigue parameters such as lead height and stiffness, thermal-cycle test profile, and part/board differential thermal expansion properties. One of the most interesting findings is the strong presence of unidirectional creep-ratcheting that occurs during thermal cycling due to temperature dominated strain-rate effects. To corroborate the solder fatigue model predictions, a number of carefully controlled thermal-cycle tests have been conducted using special bimetallic test boards.
Laser remote sensing from aircraft has become a very important technique for observing ozone in the environment. NASA Langley has an active aircraft based research program which presently uses Nd:YAG-pumped dye lasers that are then doubled into the UV to probe both the stratosphere and troposphere for ozone using the differential absorption lidar (DIAL) technique. This large system can only fly on large (NASA DC-8, Electra) aircraft and has been deployed on many missions throughout the world. In the future it will be desirable to fly autonomous, lightweight, compact ozone DIAL instruments on unpiloted atmospheric vehicles (UAV) aircraft. Such aircraft could fly at high altitudes for extended times collecting science data without risk to the operator. Cost for such missions may be substantially reduced over present large aircraft based missions. Presently there are no ozone DIAL systems capable of flying on an UAV aircraft. In order to facilitate UAV missions, small more efficient laser transmitters need to be developed that emit approximately 25mJ near 300nm for each of the DIAL 'on' and 'off' line pulses. Also lightweight, compact DIAL receiver systems need to be built and demonstrated. Such receiver systems may incorporate fiber optic coupled telescopes for maximum light gathering capability per unit area, high quantum efficiency gated photomultiplier tubes with reasonable gain and very narrow-band filters for background light rejection with high light throughput. A compact high-performance 16-bit digitizer and a data storage system are also required. A conceptional design of such a UAV DIAL instrument is presented. Here a pulsed UV laser emits pulses into the atmosphere where elastic scattering occurs which results in light being scattered into the receiver telescope. The subject of this paper is the design, construction and testing of a robust, compact ozone DIAL receiver system that would be a prototype for eventual use in a UAV aircraft.
This paper investigates the use of the general purpose automatic differentiation (AD) tool called Automatic Differentiation of FORTRAN (ADIFOR) as a means of generating sensitivity derivatives for use in Boeing Helicopter's proprietary comprehensive rotor analysis code (VII). ADIFOR transforms an existing computer program into a new program that performs a sensitivity analysis in addition to the original analysis. In this study both the pros (exact derivatives, no step-size problems) and cons (more CPU, more memory) of ADIFOR are discussed. The size (based on the number of lines) of the VII code after ADIFOR processing increased by 70 percent and resulted in substantial computer memory requirements at execution. The ADIFOR derivatives took about 75 percent longer to compute than the finite-difference derivatives. However, the ADIFOR derivatives are exact and are not functions of step-size. The VII sensitivity derivatives generated by ADIFOR are compared with finite-difference derivatives. The ADIFOR and finite-difference derivatives are used in three optimization schemes to solve a low vibration rotor design problem.
A nuclear morphometric assay for preosteoblasts is introduced as a cell-kinetic technique, applicable to routine histological preparations of mineralized tissue. Because this method is a morphological marker for osteoblast precursor cell differentiation, it provides a new dimension for determining the mechanism of osteoblast histogenesis. Osteoblast precursors of the periodontal ligament are a mixed population of progenitors, kinetically separable into two distinct groups according to nuclear size. Preosteoblasts, the immediate proliferating precursors of osteoblasts, have large nuclei (greater than 170 micrometers3) and are derived from relatively undifferentiated fibroblastlike cells, which have smaller nuclei (less than 80 micrometers3). Increase in nuclear volume, during G1 phase of the cell cycle, is apparently a morphological manifestation of change in genomic expression. This key event in preosteoblast differentiation is related to mechanical stress/strain and may be an important rate-limiting step in osteoblast histogenesis.
In order to determine if patterns of cell differentiation are similar in primary and lateral roots, I performed a morphometric analysis of the ultrastructure of calyptrogen, columella, and peripheral cells in primary and lateral roots of Helianthus annuus. Each cell type is characterized by a unique ultrastructure, and the ultrastructural changes characteristic of cellular differentiation in root caps are organelle specific. No major structural differences exist in the structures of the composite cell types, or in patterns of cell differentiation in caps of primary vs. lateral roots.
Agar blocks that contacted the upper sides of tips of horizontally-oriented roots of Zea mays contain significantly less calcium (Ca) than blocks that contacted the lower sides of such roots. This gravity-induced gradient of Ca forms prior to the onset of gravicurvature, and does not form across tips of vertically-oriented roots or roots of agravitropic mutants. These results indicate that (1) Ca can be collected from mucilage of graviresponding roots, (2) gravity induces a downward movement of endogenous Ca in mucilage overlying the root tip, (3) this gravity-induced gradient of Ca does not form across tips of agravitropic roots, and (4) formation of a Ca gradient is not a consequence of gravicurvature. These results are consistent with gravity-induced movement of Ca being a trigger for subsequent redistribution of growth effectors (e.g. auxin) that induce differential growth and gravicurvature.
The author has identified the following significant results. The main objective is to determine the extent to which can be used to differentiate between mine dumps having varying degrees of vegetative cover. At this stage it is clear that the various mine dumps can be located and identified. Differences in vegetative cover can be seen and measured. Patterns of vegetative growth, some characteristic to particular dumps, can also be seen. It is therefore tentatively concluded that mine dumps can be differentiated with respect to their vegetative cover on the imagery received to date, and this is reported as a significant result. Subsequent imagery showing seasonal variations should facilitate this program. In addition to work on the mine dumps, a photogeological project has been initiated on geotectonics of South Africa. Studies of ERTS-1 images has indicated that major structures (faults, folds, and linear features) associated with the three geotectonic environments can be identified. In addition, major as well as relatively minor stratigraphic subdivisions can be recognized by their color tones. Results obtained warrant continuation of this study using color composite prints enlarged to a scale of 1:500,000.
The plant cell wall is very complex, both in structure and function. The wall components and the mechanical properties of the wall have been implicated in conveying information that is important for morphogenesis. Proteoglycans, fragments of polysaccharides and the structural integrity of the wall may relay signals that influence cellular differentiation and growth control. Furthering our knowledge of cell wall structure and function is likely to have a profound impact on our understanding of how plant cells communicate with the extracellular environment.