Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dimensionless Numbers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Photodissociation dynamics of benzoic acid

The photodissociation of benzoic acid at 193 and 248 nm was investigated using multimass ion imaging techniques. Three dissociation channels were observed at 193 nm: (1) C{sub 6}H{sub 5}COOH{yields}C{sub 6}H{sub 5}+COOH, (2) C{sub 6}H{sub 5}COOH{yields}C{sub 6}H{sub 5}CO+OH, and (3) C{sub 6}H{sub 5}COOH{yields}C{sub 6}H{sub 6}+CO{sub 2}. Only channels, (2) and (3), were observed at 248 nm. Comparisons of the ion intensities and photofragment translational energy distributions with the potential energies obtained from ab initio calculations and the branching ratios obtained from the Rice-Ramsperger-Kassel-Marcus theory suggest that the dissociation occurs on many electronic states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Formation Process of Exceptionally Long Fullerene-Based Nanowires

In a recent study [1], it was demonstrated that exceptionally long fullerene nanowires, with a length-to-width aspect ratio as large as approx3000-5000, can be grown from 1, 2, 4-trimethylbenzene solution of C{sub 60}. We have performed a thorough theoretical analysis, aiming at gaining an in-depth understanding of the exceptionally large aspect ratio of C{sub 60}-based nanowires. By accounting for different interactions in the system we have calculated the structures of the unit cell and determined the role of the fullerene and of the solvent molecules in the crystallization process of the nanowires. We have calculated the adhesion energy of C{sub 60} molecules to the nanowire surface, and on the basis of this explained the growth anisotropy of the crystal. To get a more profound understanding of the nanowire growth mechanism we have also considered the influence of electron polarization on the growth anisotropy and studied the possible polymerization reactions occurred between the C{sub 60} and the solvent molecules.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Large amplitude dynamics of micro-/nanomechanical resonators actuated with electrostatic pulses

In the field of resonant nano-electro-mechanical system (NEMS) design, it is a common misconception that large-amplitude motion, and thus large signal-to-noise ratio, can only be achieved at the risk of oscillator instability. In the present paper, we show that very simple closed-loop control schemes can be used to achieve stable large-amplitude motion of a resonant structure even when jump resonance (caused by electrostatic softening or Duffing hardening) is present in its frequency response. We focus on the case of a resonant accelerometer sensing cell, consisting of a nonlinear clamped-clamped beam with electrostatic actuation and detection, maintained in an oscillation state with pulses of electrostatic force that are delivered whenever the detected signal (the position of the beam) crosses zero. We show that the proposed feedback scheme ensures the stability of the motion of the beam much beyond the critical Duffing amplitude and that, if the parameters of the beam are correctly chosen, one can achieve almost full-gap travel range without incurring electrostatic pull-in. These results are illustrated and validated with transient simulations of the nonlinear closed-loop system.

47 OTHER INSTRUMENTATION↗

Structure and giant magnetoresistance of granular Co-Cu nanolayers prepared by cross-beam pulsed laser deposition

A series of Co{sub x}Cu{sub 100-x} (x=0, 40-75, 100) layers with thicknesses between 13 and 55 nm were prepared on silicon substrates using cross-beam pulsed laser deposition. Wide-angle x-ray diffraction (WAXRD), transmission electron microscopy (TEM), and electrical transport measurements revealed a structure consisting of decomposed cobalt and copper grains with grain sizes of about 10 nm. The influence of cobalt content and layer thickness on the grain size is discussed. Electron diffraction indicates the presence of an intermetallic Co-Cu phase of Cu{sub 3}Au structure type. Thermal treatment at temperatures between 525 and 750 K results in the progressive decomposition of Co and Cu, with an increase of the grain sizes up to about 100 nm. This is tunable by controlling the temperature and duration of the anneal, and is directly observable in WAXRD patterns and TEM images. A careful analysis of grain size and the coherence length of the radiation used allows for an accurate interpretation of the x-ray diffraction patterns, by taking into account coherent and noncoherent scattering. The alloy films show a giant magnetoresistance of 1%-2.3% with the maximum obtained after annealing at around 725 K.

36 MATERIALS SCIENCE↗

Self-consistent poloidal electric field and neoclassical angular momentum flux

A complete expression is obtained for the poloidal variation of the electrostatic potential in the banana regime for large aspect ratio flux surfaces using the method of matched asymptotic expansions. The result exhibits a finite discontinuity at the innermost point of a flux surface instead of a divergence as previously reported. Using this expression in combination with the solution of the linearized drift kinetic equation with a model collision operator, the part of the toroidal angular momentum flux due to the poloidal electric field is calculated. The result is larger than the one in existing works, which neglect the poloidal electric field, by the order of the square root of the aspect ratio.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Light polarization characteristics of m-plane Al{sub x}Ga{sub 1-x}N films suffering from in-plane anisotropic tensile stresses

Polarization characteristics of the near-band-edge optical transitions in m-plane Al{sub x}Ga{sub 1-x}N epilayers suffering from anisotropic stresses were quantified. The epilayers were grown by both ammonia-source molecular beam epitaxy and metalorganic vapor phase epitaxy methods on an m-plane freestanding GaN substrate. The light polarization direction altered from E perpendicular c to E || c at the AlN molar fraction, x, between 0.25 and 0.32, where E is the electric field component of the light and perpendicular and || represent perpendicular and parallel, respectively. To give a quantitative explanation for the result, energies and oscillator strengths of the exciton transitions involving three separate valence bands were calculated as functions of strains using the Bir-Pikus Hamiltonian. The calculation predicted that the lowest energy transition (E{sub 1}) is polarized to the m-axis normal to the surface (X{sub 3}) for 0<x{<=}1, meaning that E{sub 1} emission is principally undetectable from the surface normal for any in-plane tensile strained Al{sub x}Ga{sub 1-x}N. The polarization direction of observable surface emission was predicted to alter from c-axis normal (X{sub 1}) to c-axis parallel (X{sub 2}) for the middle energy transition (E{sub 2}) and X{sub 2} to X{sub 1} for the highest energy transition (E{sub 3}) between x=0.25 and 0.32. The experimental results were consistently reproduced by the calculation.

36 MATERIALS SCIENCE↗

Ni doping of semiconducting boron carbide

The wide band gap, temperature stability, high resistivity, and robustness of semiconducting boron carbide make it an attractive material for device applications. Undoped boron carbide is p type; Ni acts as a n-type dopant. Here we present the results of controlled doping of boron carbide with Ni on thin film samples grown using plasma enhanced chemical vapor deposition. The change in the dopant concentration within the thin film as a function of the dopant flow rate in the precursor gas mixture was confirmed by x-ray photoelectron spectroscopy measurements; with increasing dopant concentration, current-voltage (I-V) curves clearly establish the trend from p-type to n-type boron carbide.

36 MATERIALS SCIENCE↗

Magnetostrictive and structural properties of FeCoGa films

Fe{sub 81-x}Co{sub x}Ga{sub 19} (with x ranging from 0 to 19 at. % Co) films were made by the dc magnetron sputtering method. We have studied the structural (phases, texturing, and grain size D), magnetic (saturation magnetostriction {lambda}{sub S} and coercivity H{sub C}), mechanical (Young's modulus E{sub f} and hardness H{sub f}), and electrical (electrical resistivity {rho}) properties of these films. The main results are as follows: (i) all the films are (110) textured; (ii) the bct phase (with twinned grains) coexists with the bcc phase only in the case of x{<=}3 at. % Co; (iii) {lambda}{sub S} increases steadily from 42 to 86 ppm, as x increases from 0 to 19 at. % Co; and (iv) {rho} reaches the saturation limit, about 200 {mu}{Omega} cm, when 19{>=}x{>=}15 at. % Co. In conclusion, we report that the Fe{sub 62}Co{sub 19}Ga{sub 19} film has the optimal magnetic, mechanical, and electrical properties among all the FeCoGa films measured.

36 MATERIALS SCIENCE↗

Electrical and optical properties of Fe doped AlGaN grown by molecular beam epitaxy

Electrical and optical properties of AlGaN grown by molecular beam epitaxy were studied in the Al composition range 15%-45%. Undoped films were semi-insulating, with the Fermi level pinned near E{sub c}-0.6-0.7 eV. Si doping to (5-7)x10{sup 17} cm{sup -3} rendered the 15% Al films conducting n-type, but a large portion of the donors were relatively deep (activation energy 95 meV), with a 0.15 eV barrier for capture of electrons giving rise to strong persistent photoconductivity (PPC) effects. The optical threshold of this effect was {approx}1 eV. Doping with Fe to a concentration of {approx}10{sup 17} cm{sup -3} led to decrease in concentration of uncompensated donors, suggesting compensation by Fe acceptors. Addition of Fe strongly suppressed the formation of PPC-active centers in favor of ordinary shallow donors. For higher Al compositions, Si doping of (5-7)x10{sup 17} cm{sup -3} did not lead to n-type conductivity. Fe doping shifted the bandedge luminescence by 25-50 meV depending on Al composition. The dominant defect band in microcathodoluminescence spectra was the blue band near 3 eV, with the energy weakly dependent on composition.

36 MATERIALS SCIENCE↗

Infrared luminescence of Tm{sup 3+}/Yb{sup 3+} codoped lanthanum aluminum germanate glasses

Tm{sup 3+} doped and Tm{sup 3+}/Yb{sup 3+} codoped lanthanum aluminum germanate (LAG) glasses are prepared by melt-quenching method and characterized optically. Based on the measurement of absorption spectrum, Judd-Ofelt intensity parameters ({Omega}{sub 2},{Omega}{sub 4},{Omega}{sub 6}) are calculated. The radiation emission rates, branching ratios, and lifetimes of Tm{sup 3+} are calculated to evaluate the spectroscopic properties of Tm{sup 3+} in LAG glass. The infrared emission properties of the samples are investigated and the results show that the 1.8 {mu}m emission can be greatly enhanced by adding proper amount of Yb{sup 3+} under the excitation of 980 nm. The energy transfer processes of Yb{sup 3+}-Yb{sup 3+} and Yb{sup 3+}-Tm{sup 3+} are analyzed, and the results show that Yb{sup 3+} ions can transfer their energy to Tm{sup 3+} ions with high efficiency and large energy transfer coefficient.

36 MATERIALS SCIENCE↗

High energy electron fluxes in dc-augmented capacitively coupled plasmas. II. Effects on twisting in high aspect ratio etching of dielectrics

In high aspect ratio (HAR) plasma etching of holes and trenches in dielectrics, sporadic twisting is often observed. Twisting is the randomly occurring divergence of a hole or trench from the vertical. Many causes have been proposed for twisting, one of which is stochastic charging. As feature sizes shrink, the fluxes of plasma particles, and ions in particular, into the feature become statistical. Randomly deposited charge by ions on the inside of a feature may be sufficient to produce lateral electric fields which divert incoming ions and initiate nonvertical etching or twisting. This is particularly problematic when etching with fluorocarbon gas mixtures where deposition of polymer in the feature may trap charge. dc-augmented capacitively coupled plasmas (dc-CCPs) have been investigated as a remedy for twisting. In these devices, high energy electron (HEE) beams having narrow angular spreads can be generated. HEEs incident onto the wafer which penetrate into HAR features can neutralize the positive charge and so reduce the incidence of twisting. In this paper, we report on results from a computational investigation of plasma etching of SiO{sub 2} in a dc-CCP using Ar/C{sub 4}F{sub 8}/O{sub 2} gas mixtures. We found that HEE beams incident onto the wafer are capable of penetrating into features and partially neutralizing positive charge buildup due to sporadic ion charging, thereby reducing the incidence of twisting. Increasing the rf bias power increases the HEE beam energy and flux with some indication of improvement of twisting, but there are also changes in the ion energy and fluxes, so this is not an unambiguous improvement. Increasing the dc bias voltage while keeping the rf bias voltage constant increases the maximum energy of the HEE and its flux while the ion characteristics remain nearly constant. For these conditions, the occurrence of twisting decreases with increasing HEE energy and flux.

36 MATERIALS SCIENCE↗

Proton disorder and the dielectric constant of type II clathrate hydrates

Computational studies are presented examining the degree of proton disorder in argon and molecular hydrogen sII clathrate hydrates. Results are presented using a variety of model potentials for the dielectric constant, the proton order parameter, and the molecular volume for the clathrate systems. The dielectric constant for the clathrate systems is found to be lower than the dielectric constant of ice in all models. The ratio of the clathrate to ice dielectric constant correlates well with the ratio of the densities, which is not the case for comparisons to the liquid, so that differences in the dielectric constants between ice and the clathrates are most likely due to differences in densities. Although the computed dielectric constant is a strong function of the model potential used, the ratio of the dielectric constant of ice to that of the clathrates is insensitive to the model potential. For the nonpolar guest molecules used in the current study, the degree proton of disorder is found to depend weakly on the identity of the guest but the dielectric constant does not appear to be sensitive to pressure or the type of guest.

36 MATERIALS SCIENCE↗

HIGH RESOLUTION EXPERIMENTAL MEASUREMENTS OF RICHTMYER-MESHKOV TURBULENCE IN FLUID LAYERS AFTER RESHOCK USING SIMULTANEOUS PIV-PLIF

True ensemble-averaged density self-correlation and Reynolds stress turbulence statistics in a Richtmyer-Meshkov unstable fluid layer after reshock are measured for the first time using simultaneous Particle-Image Velocimetry (PIV)-Planar Laser-Induced Fluorescence (PLIF) diagnostic. These high-quality experiments with advanced diagnostics provide important insights into the physics of RM turbulence that cannot be obtained using simple shadowgraphy or Schlieren diagnostics. The double peaked nature of the density self-correlation and the asymmetric character of the Reynolds stress distributions are discussed. Error estimates and convergence rates for several turbulence quantities are also provided.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Zn{sub 1-x}Mn{sub x}Te-based diluted magnetic semiconductor nanowire structures grown by MBE

We report on the catalytically enhanced molecular beam epitaxial growth of Zn{sub 1-x}Mn{sub x}Te-based nanowire structures, with manganese content up to x = 0.6, and on their basic structural and optical properties. The measurements that have been carried out confirm the incorporation of Mn{sup 2+} ions in the cation substitutional sites of ZnTe lattice.

36 MATERIALS SCIENCE↗

Electric-Field Modulation of Curie Temperature in (Ga, Mn)As Field-Effect Transistor Structures with Varying Channel Thickness and Mn Compositions

We have investigated the change of T{sub C} of ferromagnetic semiconductor (Ga, Mn)As by changing hole concentration p. The field effect transistor structure was utilized to change p. The relation T{sub C}propor top{sup 0.2} is obtained for three samples, despite the difference of their Mn composition and thickness, indicating that the relation holds over 2 decades of p.

36 MATERIALS SCIENCE↗

Optical Phonons In InAlAs Thin Layers: Raman And IR Study

We present a study of the optical phonon spectrum of relaxed In{sub x}Al{sub 1-x}As epitaxial layers grown by molecular-beam epitaxy on GaAs substrates in the whole range of In content (x = 0 divide 1) using macro- and micro-Raman and IR spectroscopies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculation of Ion Charge State Distributions After Inner-Shell Ionization in Xe Atom

The vacancy cascades following initial inner-shell vacancies in single and multi-ionized atoms often lead to highly charged residual ions. The inner-shell vacancy produced by ionization processes may decay by either a radiative or non-radiative transition. In addition to the vacancy filling processes, there is an electron shake off process due to the change of core potential of the atom. In the calculation of vacancy cascades, the radiative (x-ray) and non-radiative (Auger and Coster-Kronig) branching ratios give valuable information on the de-excitation dynamics of an atom with inner-shell vacancy. The production of multi-charged ions yield by the Auger cascades following inner shell ionization of an atom has been studied both experimentally and theoretically. Multi-charged Xe ions following de-excitation of K-, L{sub 1}-, L{sub 2,3}-, M{sub 1}-, M{sub 2,3}- and M{sub 4,5} subshell vacancies are calculated using Monte-Carlo algorithm to simulate the vacancy cascade development. Fluorescence yield (radiative) and Auger, Coster- Kronig yield (non- radiative) are evaluated. The decay of K hole state through radiative transitions is found to be more probable than non-radiative transitions in the first step of de-excitation. On the other hand, the decay of L, M vacancies through non-radiative transitions are more probable. The K shell ionization in Xe atom mainly yields Xe{sup 7+}, Xe{sup 8+}, Xe{sup 9+} and Xe{sup 10+} ions, and the charged X{sup 8+} ions are the highest. The main product from the L{sub 1}- shell ionization is found to be Xe{sup 8+}, Xe{sup 9+} ions, while the charged Xe{sup 8+} ions predominate at L{sub 2,3} hole states. The charged Xe{sup 6+}, Xe{sup 7+} and Xe{sup 8+} ions mainly yield from 3s{sub 1/2} and 3p{sub 1/2,3/2} ionization, while Xe in 3d{sub 3/2,5/2} hole states mainly turns into Xe{sup 4+} and Xe{sup 5+} ions. The present results are found to agree well with the experimental data.

74 ATOMIC AND MOLECULAR PHYSICS↗

Plasma enhanced chemical vapor deposition of wear resistant gradual a-Si{sub 1-x}:C{sub x}:H coatings on nickel-titanium for biomedical applications

Plasma enhanced chemical vapor deposition has been used to deposit thin films with gradual transitions from silicon to carbon on Cu, Ni, stainless steel, and NiTi. Thus show low stress, elasticity, and wear resistance with excellent adhesion on all metals under investigation. Already at low Si concentrations of 10 at. % the intrinsic stress is considerably reduced compared to pure diamondlike carbon (DLC) films. The deposition process is controlled by optical emission spectroscopy. This technique has been applied to monitor the growth precursors and to correlate them with the film composition. The compositions of the films were determined by Rutherford backscattering spectroscopy and XPS measurements. Due to the elastic properties of the gradual transition and the excellent biocompatibility of DLC, the described film systems present a useful coating for biomedical applications.

36 MATERIALS SCIENCE↗