Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct Drive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Disordering, clustering, and laning transitions in particle systems with dispersion in the Magnus term

We numerically examine a two-dimensional system of repulsively interacting particles with dynamics that are governed by both a damping term and a Magnus term. The magnitude of the Magnus term has one value for half of the particles and a different value for the other half of the particles. In the absence of a driving force, the particles form a triangular lattice, while when a driving force is applied, we find that there is a critical drive above which a Magnus-induced disordering transition can occur even if the difference in the Magnus term between the two particle species is as small as one percent. The transition arises due to the different Hall angles of the two species, which causes their motion to decouple at the critical drive. At higher drives, the disordered state can undergo both species and density phase separation into a density-modulated stripe that is oriented perpendicular to the driving direction. We observe several additional phases that occur as a function of drive and Magnus force disparity, including a variety of density-modulated diagonal-laned phases. In general, we find a much richer variety of states compared to systems of oppositely driven overdamped Yukawa particles. Here, we discuss the implications of our work for skyrmion systems, where we predict that even for small skyrmion dispersities, a drive-induced disordering transition can occur along with clustering phases and pattern-forming states.

36 MATERIALS SCIENCE↗

Theoretical Description of Pump-Probe Experiments in Charge-Density-Wave Materials out to Long Times

We describe coupled nonequilibrium electron-phonon systems semiclassically—Ehrenfest dynamics for the phonons and quantum mechanics for the electrons—using a classical Monte Carlo approach that determines the nonequilibrium response to a large pump field. The semiclassical approach is expected to be accurate, because the phonons are excited to average energies much higher than the phonon frequency, eliminating the need for a quantum description. The numerical efficiency of this method allows us to perform a self-consistent time evolution out to very long times (tens of picoseconds), enabling us to model pump-probe experiments of a charge-density-wave (CDW) material. Our system is a half-filled, one-dimensional (1D) Holstein chain that exhibits CDW ordering due to a Peierls transition. The chain is subjected to a time-dependent electromagnetic pump field that excites it out of equilibrium, and then a second probe pulse is applied after a time delay. By evolving the system to long times, we capture the complete process of lattice excitation and subsequent relaxation to a new equilibrium, due to an exchange of energy between the electrons and the lattice, leading to lattice relaxation at finite temperatures. We employ an indirect (impulsive) driving mechanism of the lattice by the pump pulse due to the direct driving of the electrons. We identify two driving regimes, where the pump can either cause small perturbations or completely invert the initial CDW order. Our work successfully describes the ringing of the amplitude mode in CDW systems that has long been seen in experiment but never successfully explained by microscopic theory. We also describe the fluence-dependent crossover that inverts the CDW order parameter and changes the phonon dynamics. Finally, we illustrate how this method can examine a number of different types of experiments including photoemission, x-ray diffraction, and two-dimensional (2D) spectroscopy. Published by the American Physical Society 2024

Physics↗

Measuring preheat in laser-drive aluminum using velocity interferometer system for any reflector: Experiment

In this paper, we systematically study preheating in laser-direct-drive shocks by using a velocity interferometer system for any reflector (VISAR). Using the VISAR, we measured free surface velocity histories of Al samples over time, 10–70 μm thick, driven directly by a laser at different frequencies (2ω, 3ω). Analyzing our experimental results, we concluded that the dominant preheating source was X-ray radiation. We also discussed how preheating affected the material initial density and the measurement of Hugoniot data for high-Z materials (such as Au) using impedance matching. To reduce preheating, we proposed and tested three kinds of targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A simple method to prevent hard X-ray-induced preheating effects inside the cone tip in indirect-drive fast ignition implosions

During fast-ignition implosions, preheating of inside the cone tip caused by hard X-rays can strongly affect the generation and transport of hot electrons in the cone. Although indirect-drive implosions have a higher implosion symmetry, they cause stronger preheating effects than direct-drive implosions. To control the preheating of the cone tip, we propose the use of indirect-drive fast-ignition targets with thicker tips. Experiments carried out at the ShenGuang-III prototype laser facility confirmed that thicker tips are effective for controlling preheating. Moreover, these results were consistent with those of 1D radiation hydrodynamic simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Fielding of a High Gain, Shock-Ignited Target on the National Ignitiion Facility in the Near Term

Shock ignition, a new concept for igniting thermonuclear fuel, offers the possibility for a near-term ({approx}3-4 years) test of high gain inertial confinement fusion on the National Ignition Facility at less than 1MJ drive energy and without the need for new laser hardware. In shock ignition, compressed fusion fuel is separately ignited by a strong spherically converging shock and, because capsule implosion velocities are significantly lower than those required for conventional hotpot ignition, fusion energy gains of {approx}60 may be achievable on NIF at laser drive energies around {approx}0.5MJ. Because of the simple all-DT target design, its in-flight robustness, the potential need for only 1D SSD beam smoothing, minimal early time LPI preheat, and use of present (indirect drive) laser hardware, this target may be easier to field on NIF than a conventional (polar) direct drive hotspot ignition target. Like fast ignition, shock ignition has the potential for high fusion yields at low drive energy, but requires only a single laser with less demanding timing and spatial focusing requirements. Of course, conventional symmetry and stability constraints still apply. In this paper we present initial target performance simulations, delineate the critical issues and describe the immediate-term R&D program that must be performed in order to test the potential of a high gain shock ignition target on NIF in the near term.

42 ENGINEERING↗

Development of a Polar Drive Shock Ignition Platform on the National Ignition Facility

Shock ignition, a new concept for igniting thermonuclear fuel, offers the possibility for a near-term test of high-gain inertial confinement fusion on the National Ignition Facility at less than 1MJ drive energy and without the need for new laser hardware. In shock ignition, compressed fusion fuel is separately ignited by a strong late-time laser-driven shock and, because capsule implosion velocities are significantly lower than those required for conventional hotpot ignition, fusion energy gains of ~60 may be achievable on NIF at laser drive energies around ~0.5MJ, extending to ~100 at 1MJ. Because of the simple all-DT target design, its in-flight robustness, the potential need for only 1D SSD beam smoothing, minimal early time LPI preheat, and use of present (indirect drive) laser hardware, this target should be easier to field on NIF than a conventional direct-drive hotspot ignition target. A key immediate need is to determine the adequacy of low-mode drive uniformity and shock symmetry under NIF polar drive for the convergence ratios envisaged for these targets. Accordingly, we propose a set of phased experiments employing room temperature hydro-equivalent CH shells to (a) optimize NIF polar-drive symmetry and shock coupling under a combination of beam repointing, partial defocusing and phasing the time-dependent power balance from quad to quad, and (b) characterize the resulting laser-plasma interactions. The objective is to determine the optimum laser drive specifications that will then enable the fielding of a full cryogenic high-gain shock-ignition target on NIF ca. 2014.

42 ENGINEERING↗

High Performance Reduction/Oxidation Metal Oxides for Thermochemical Energy Storage (PROMOTES) /CSP

Thermochemical energy storage (TCES) offers the potential for greatly increased storage density relative to sensible-only energy storage. Moreover, heat may be stored indefinitely in the form of chemical bonds via TCES, accessed upon demand, and converted to heat at temperatures significantly higher than current solar thermal electricity production technology and is therefore well-suited to more efficient high-temperature power cycles. However, this potential has yet to be realized as no current TCES system satisfies all requirements. This project involves the design, development, and demonstration of a robust and innovative storage cycle based on redox-active metal oxides that are Mixed Ionic-Electronic Conductors (MIECs). We will develop, characterize, and demonstrate a first of its kind 100kWth particle-based TCES system for direct integration with combined-cycle Air Brayton based on the endothermic reduction and exothermic reoxidation of MIECs. Air Brayton cycles require temperatures in the range of 1000-1230 °C for smaller axial flow turbines and are therefore inaccessible to all but the most robust storage solutions such as metal oxides. The choice of MIECs, with exceptional tunability and stability over the specified operating conditions allows us to optimally target this high impact cycle and to introduce the innovation of directly driving the turbine with the reacting/heat recovery fluid. The potential for high temperature thermal storage has direct bearing on next-gen CSP, and an appropriate investment for SETO.

25 ENERGY STORAGE↗

PRP Comments for ICF Q1/Q2 FY17 Experiments 3/10/16

The PRP generally endorsed the Program plan during the short time for discussions. We agree that the strategy to develop a hohlraum that is symmetric and has low laser-plasma instabilities and to develop an alternative method for supporting the capsule is the best path forward for making progress in understanding ignition performance. The Program is oriented toward a milestone in 2020 for “determining the efficacy of NIF for ignition and credible physics-scaling to multi-megajoule yields for all ICF approaches.” We are concerned that the time and resources are not sufficient to vet all of the various approaches that are being pursued to make an informed decision by this date. For NIF to meet this goal, a process will be needed to to select the most promising paths forward. We recommend that the Program develop this process for selecting the path forward to optimize resources. We were glad to see that the direct drive program took our comments under consideration. We think that the proposed experiments have the program headed in a better direction. The PRP had only a short time to discuss the detailed experimental proposals. The following are comments on the detailed proposals. We did not have time to discuss them as a group. They represent individual opinions and provided to you as feedback to your proposals.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamic control of robot arms in tasks space using nonlinear feedback

Differential geometric system and control theory is used to develop a new dynamic system feedback technique for robot task space commands. The nonlinear robot arm system is feedback-linearized and simultaneously is output-decoupled by an appropriate nonlinear feedback and nonlinear coordinate transformation. On the joint space level, the scheme only commands drive forces or torques or their equivalent quantities addressed to the joint drives. An important property of the technique is that the planned and commanded task space trajectory together with its time derivatives directly drive the robot arm through a linear system model. A method for task space motion planning matching the requirements of the new scheme is briefly presented. The implications of the new technique for second and third order model robot arms with and without force feedback measuremnts and for two or more dynamically cooperating robot arms are discussed.

Bejczy, A. K.↗

Magnetostrictive Roller-Drive Stepping Motor

Proposed motor based on magnetostrictive effect provides stepped angular motion with angular increments of order of 100 microradians. Driven to repeat stepping cycle rapidly enough to achieve maximum speed of about 20 rpm, provides torque an order of magnitude greater than electric motors, and brakes itself when power turned off. Magnetostrictive rods in electromagnet coils push against drive plate, causing it to rotate slightly. This slight rotation jams conical rollers between cam surfaces on outer drive ring and split drum, so rollers transmit rotation to drum. Suitable for precise, high-torque, fail-safe-braking, direct drive of robot joint, without bulk and weight of additional brake mechanism and gear train.

Vranish, John M.↗

Measuring Input Thresholds on an Existing Board

A critical PECL (positive emitter-coupled logic) interface to Xilinx interface needed to be changed on an existing flight board. The new Xilinx input interface used a CMOS (complementary metal-oxide semiconductor) type of input, and the driver could meet its thresholds typically, but not in worst-case, according to the data sheet. The previous interface had been based on comparison with an external reference, but the CMOS input is based on comparison with an internal divider from the power supply. A way to measure what the exact input threshold was for this device for 64 inputs on a flight board was needed. The measurement technique allowed an accurate measurement of the voltage required to switch a Xilinx input from high to low for each of the 64 lines, while only probing two of them. Directly driving an external voltage was considered too risky, and tests done on any other unit could not be used to qualify the flight board. The two lines directly probed gave an absolute voltage threshold calibration, while data collected on the remaining 62 lines without probing gave relative measurements that could be used to identify any outliers. The PECL interface was forced to a long-period square wave by driving a saturated square wave into the ADC (analog to digital converter). The active pull-down circuit was turned off, causing each line to rise rapidly and fall slowly according to the input s weak pull-down circuitry. The fall time shows up as a change in the pulse width of the signal ready by the Xilinx. This change in pulse width is a function of capacitance, pulldown current, and input threshold. Capacitance was known from the different trace lengths, plus a gate input capacitance, which is the same for all inputs. The pull-down current is the same for all inputs including the two that are probed directly. The data was combined, and the Excel solver tool was used to find input thresholds for the 62 lines. This was repeated over different supply voltages and temperatures to show that the interface had voltage margin under all worst case conditions. Gate input thresholds are normally measured at the manufacturer when the device is on a chip tester. A key function of this machine was duplicated on an existing flight board with no modifications to the nets to be tested, with the exception of changes in the FPGA program.

Kuperman, Igor↗

Magnetically applied pressure-shear : a new technique for direct strength measurement at high pressure (final report for LDRD project 117856).

A new experimental technique to measure material shear strength at high pressures has been developed for use on magneto-hydrodynamic (MHD) drive pulsed power platforms. By applying an external static magnetic field to the sample region, the MHD drive directly induces a shear stress wave in addition to the usual longitudinal stress wave. Strength is probed by passing this shear wave through a sample material where the transmissible shear stress is limited to the sample strength. The magnitude of the transmitted shear wave is measured via a transverse VISAR system from which the sample strength is determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The inviscid incompressible limit of Kelvin–Helmholtz instability for plasmas

The Kelvin–Helmholtz Instability (KHI) is an interface instability that develops between two fluids or plasmas flowing with a common shear layer. KHI occurs in astrophysical jets, solar atmosphere, solar flows, cometary tails, planetary magnetospheres. Two applications of interest, encompassing both space and fusion applications, drive this study: KHI formation at the outer flanks of the Earth’s magnetosphere and KHI growth from non-uniform laser heating in magnetized direct-drive implosion experiments. Here, we study 2D KHI with or without a magnetic field parallel to the flow. We use both the GAMERA code, which solves the compressible Euler equations, and the STRATOSPEC code, which solves the Navier-Stokes equations under the Boussinesq approximation, coupled with the magnetic field dynamics. GAMERA is a global three-dimensional MHD code with high-order reconstruction in arbitrary nonorthogonal curvilinear coordinates, which is developed for a large range of astrophysical applications. STRATOSPEC is a three-dimensional pseudo-spectral code with an accuracy of infinite order (no numerical diffusion). Magnetized KHI is a canonical case for benchmarking hydrocode simulations with extended MHD options. An objective is to assess whether or not, and under which conditions, the incompressibility hypothesis allows to describe a dynamic compressible system. For comparing both codes, we reach the inviscid incompressible regime, by decreasing the Mach number in GAMERA, and viscosity and diffusion in STRATOSPEC. Here, we specifically investigate both single-mode and multi-mode initial perturbations, either with or without magnetic field parallel to the flow. The method relies on comparisons of the density fields, 1D profiles of physical quantities averaged along the flow direction, and scale-by-scale spectral densities. We also address the triggering, formation and damping of filamentary structures under varying Mach number or Atwood number, with or without a parallel magnetic field. Comparisons show very satisfactory results between the two codes. The vortices dynamics is well reproduced, along with the breaking or damping of small-scale structures. We end with the extraction of growth rates of magnetized KHI from the compressible regime to the incompressible limit in the linear regime assessing the effects of compressibility under increasing magnetic field. The observed differences between the two codes are explained either from diffusion or non-Boussinesq effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mass optimization of a supercritical CO 2 Brayton cycle with a direct cooled nuclear reactor for space surface power

A long life, reliable, and compact surface power system will be necessary to achieve future goals in space exploration. This application uniquely requires the system to be optimized with respect to mass because system mass directly drives the space launch cost associated with transporting the system to its desired location. In this study, a supercritical CO 2 Brayton cycle coupled to a direct-cooled nuclear reactor was designed and optimized for mass. Robust models were developed for each Brayton cycle component in order to model the cycle performance. The three most massive components of this cycle are the radiator-based heat rejection system (subsequently referred to as the “radiator”), recuperator, and reactor. Mass correlations for the recuperator and radiator were established through interactions with component experts from industry and national labs. A reactor model was developed to predict the minimum mass reactor that satisfies neutronic and thermal limitations for given cycle conditions. The system optimization explores tradeoffs between the reactor, recuperator, and radiator sizes in order to identify the least massive system that will satisfy the power (40 kWe) and life (10 yr) requirements. To explore the effects of turbine inlet temperature on system mass, three types of microtube and shell recuperator technologies were considered: baseline stainless steel (which is consistent with the industry partner’s current designs), stainless steel with non-heritage tube sizes (which requires further development of manufacturing techniques), and Inconel (which is not a current/legacy design). Both stainless steel designs have a temperature limit of 823 K, which limits the turbine inlet temperature to 900 K. The baseline stainless steel design results in a combined mass of 738 kg. The stainless steel design allowing for non-heritage tube sizes reduces the combined mass to 674 kg (a 9% improvement). The Inconel design leads to an optimal turbine inlet temperature of 1120 K and reduces the combined mass to 391 kg (a 47% improvement). Furthermore, the interesting conclusion from this study include: (1) radiator mass dominates the total mass, and this drives the cycle to relatively high heat rejection temperatures resulting in a compressor inlet state point that is not close to the vapor dome; thus, the typical advantages of an sCO 2 system are not realized, and a working fluid with a higher critical temperature may be more suitable, and (2) neutronic limitations cause the reactor size to be relatively unaffected by the power level.

42 ENGINEERING↗

Development of an ab initio learned model of electron deposition range in deuterium-tritium plasmas through time-dependent density functional theory calculations and machine learning

Accurate hydrodynamic modeling for laser-direct-drive (LDD) inertial-confinement-fusion (ICF) relies on precise calculations of the electron thermal conduction in all target materials. The nonlocal stopping range of electrons in ICF plasmas directly influences thermal conduction; yet, no first principles model exists for the electron mean free path in the conduction-zone regime. This work utilized time-dependent stochastic density-functional theory (TD-sDFT) to calculate the electron stopping power in deuterium-tritium (DT) plasmas at (ρ, T) conditions relevant to the conduction zone and the compressed shell in ICF. Using a combination of our TD-sDFT data and already established analytical models, we developed and trained an artificial neural network to create a global model for the nonlocal electron deposition range, λ E . We compared our machine-learning (ML) based model for λ E to the currently-used modified-Lee-More model in LDD radiation-hydrodynamic codes, such as lilac, and saw an overall decrease in the deposition range. To understand the effects of λ E on LDD ICF implosion dynamics, we implemented the ML-based model into lilac; specifically, we looked at designs consistent with a current experiment on the OMEGA laser and for a newly designed LDD-ICF target for the future OMEGA-Next facility. In both cases, we saw an overall drop in predicted ablation pressure, peak areal density, and neutron yield due to the reduced thermal conduction (smaller λ E ) in DT plasmas. Comparisons with the experiment on OMEGA are also made.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two wheeled lunar dumptruck

The design of a two wheel bulk material transport vehicle is described in detail. The design consists of a modified cylindrical bowl, two independently controlled direct drive motors, and two deformable wheels. The bowl has a carrying capacity of 2.8 m (100 ft) and is constructed of aluminum. The low speed, high HP motors are directly connected to the wheels, thus yielding only two moving parts. The wheels, specifically designed for lunar applications, utilize the chevron tread pattern for optimum traction. The vehicle is maneuvered by varying the relative angular velocities of the wheels. The bulk material being transported is unloaded by utilizing the motors to oscillate the bowl back and forth to a height at which dumping is achieved. The analytical models were tested using a scaled prototype of the lunar transport vehicle. The experimental data correlated well with theoretical predictions. Thus, the design established provides a feasible alternative for the handling of bulk material on the moon.

Brus, Michael R.↗

White paper on plasma simulation

Increases in computer power combined with improved algorithms have considerably improved the ability of simulations to model plasma experiments. Higher fidelity simulations with more complete physics treatment and better resolution have improved our understanding of the physics controlling the performance of these experiments. For example, in inertial confinement fusion (ICF) simulations of indirect drive ignition targets and capsules can now include the broad range of perturbation sources, including surface imperfections, engineering features and drive asymmetries together in a fully 3D geometry. These have significantly improved the ability of simulations to match a suite of experimental observations across a range of targets.1-3 Simulations of direct drive targets and magnetically driven targets have also increased in fidelity and realism. The US is the leader in its capabilities to perform plasma simulations. This leadership has highly important implications for national security as well as future energy security and economic competitiveness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy efficient engine: Preliminary design and integration studies

A mixed exhaust, direct drive fan turbofan configuration was selected from four candidates. This choice was based on its ability to exceed study goals of 12% lower thrust specific fuel consumption and 5% lower direct operating cost by the 1990's with commercially acceptable technical risk and relative mechanical simplicity. The evaluation leading to configuration selection is discussed. Necessary technology advancements are identified and related to the goals.

Gray, D. E.↗