SEARCH · Search NASA

Results for “ELECTRON CAPTURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS2000

Hydrogen Sensors Demonstrated on the Shuttle

Microelectromechanical-systems- (MEMS-) based hydrogen sensor technology developed by the NASA Glenn Research Center at Lewis Field and Case Western Reserve University was demonstrated on shuttle missions STS-95 (Senator Glenn s mission) and STS-96. These smart sensors, commercialized by Makel Engineering Inc., were part of an "Integrated Vehicle Health Monitoring HEDS Technology Demonstration" series conducted at the NASA Kennedy Space Center. The experiments were designed to demonstrate the effect of technological upgrades on shuttle performance. The hydrogen sensors were micro-fabricated for minimal size, weight, and power consumption. A temperature detector and heater were included on the sensor for temperature control. Two palladium chrome (PdCr) hydrogen detection devices were included in each sensor package: a Schottky diode for low concentrations and a resistor for high concentrations. These sensor designs allow operation in inert environments. "Smart" electronics developed by Makel Engineering were integrated with the sensors to control the sensor temperature and process the output of the various sensors. This complete hydrogen detection system (two sensors on a chip with smart electronics) flew on STS-95 (launched October 1998) and STS-96 (launched May 1999). It was installed in the aft compartment of the shuttle and used to monitor the hydrogen concentration in that region. Up to this time, a mass spectrometer had monitored the hydrogen concentration in the aft compartment before launch, and "grab" bottles had been used after launch. The inside of these bottles is at vacuum. During flight, the grab bottles are pyrotechnically opened for a brief period, and the gas in the aft compartment is captured in the bottle. Several of these bottles are opened at different times during takeoff, and their contents are used to determine the time profile of the gases in the aft chamber. However, this information is not available until after the flight. On the launch pad, results from the new sensor technology paralleled the responses of the mass spectrometer with, in some cases, a quicker response time. In flight, data from the new sensors agreed with those derived from analyzing the contents of the grab bottles. Moreover, this microsensor can monitor the aft compartment continuously and, in principle, could monitor the health of the vehicle in real time during flight.

Hunter, Gary W.↗

NASA NTRS2010

Towards Prognostics of Power MOSFETs: Accelerated Aging and Precursors of Failure

This paper presents research results dealing with power MOSFETs (metal oxide semiconductor field effect transistor) within the prognostics and health management of electronics. Experimental results are presented for the identification of the on-resistance as a precursor to failure of devices with die-attach degradation as a failure mechanism. Devices are aged under power cycling in order to trigger die-attach damage. In situ measurements of key electrical and thermal parameters are collected throughout the aging process and further used for analysis and computation of the on-resistance parameter. Experimental results show that the devices experience die-attach damage and that the on-resistance captures the degradation process in such a way that it could be used for the development of prognostics algorithms (data-driven or physics-based).

Celaya, Jose R.↗

NASA NTRSDate not supplied

Quantum Hardware-Enabled Molecular Dynamics via Transfer Learning

The ability to perform ab initio molecular dynamics simulations using potential energy surfaces provided by quantum computers would open the door to virtually exact dynamics for a variety of chemical and biochemical systems, with impacts on catalysis and biophysics. Nonetheless, performing molecular dynamics on surfaces produced by quantum hardware has been hampered by the noisy energies typically produced by quantum computers and challenges associated with computing gradients and scaling to large systems interest. A recent set of advances in machine learning, known as transfer learning, provides a new path forward for molecular dynamics simulations on quantum hardware. Transfer learning offers a workaround, where one first trains models on larger, less accurate classical datasets and then refines them on smaller, more accurate quantum datasets. We explore this approach by training machine learning models to predict a molecule's potential energy based on its geometric structure using Behler-Parrinello neural networks. When successfully trained, the model enables energy gradient predictions necessary for dynamic simulations. To reduce the quantum resources needed, the model is initially trained with data derived from classical density functional theory and subsequently refined with a smaller dataset obtained from a variational quantum eigensolver optimization of the unitary coupled cluster ansatz. We show that this approach significantly reduces the size of the needed quantum training dataset while capturing the high accuracies needed within quantum chemistry simulations. The success of this two-step training method opens more opportunities to apply machine learning models on quantum data, a significant stride towards efficient quantum-classical hybrid computational models.

quantum computing↗

NASA NTRS2017

Mars Atmospheric Conversion to Methane and Water: An Engineering Model of the Sabatier Reactor with Characterization of Ru/Al2O3 for Long Duration Use on Mars

The Atmospheric Processing Module (APM) is a Mars In-Situ Resource Utilization (ISRU) technology designed to demonstrate conversion of the Martian atmosphere into methane and water. The Martian atmosphere consists of approximately 95 carbon dioxide (CO2) and residual argon and nitrogen. APM utilizes cryocoolers for CO2 acquisition from a simulated Martian atmosphere and pressure. The captured CO2 is sublimated and pressurized as a feedstock into the Sabatier reactor, which converts CO2 and hydrogen to methane and water. The Sabatier reaction occurs over a packed bed reactor filled with Ru/Al2O3 pellets. The long duration use of the APM system and catalyst was investigated for future scaling and failure limits. Failure of the catalyst was detected by gas chromatography and temperature sensors on the system. Following this, characterization and experimentation with the catalyst was carried out with analysis including x-ray photoelectron spectroscopy and scanning electron microscopy with elemental dispersive spectroscopy. This paper will discuss results of the catalyst performance, the overall APM Sabatier approach, as well as intrinsic catalyst considerations of the Sabatier reactor performance incorporated into a chemical model.

Ru/Al2O3 Catlayst↗

NASA NTRS2017

Mars Atmospheric Conversion to Methane and Water: An Engineering Model of the Sabatier Reactor with Characterization of Ru/Al2O3 for Long Duration Use on Mars

Catlayst↗

NASA NTRS1991

The design of electronic map displays

This paper presents a cognitive analysis of a pilot's navigation task and describes an experiment comparing a new map display that employs the principle of visual momentum with the two traditional approaches, track-up and north-up. The data show that the advantage of a track-up alignment is its congruence with the egocentered forward view; however, the inconsistency of the rotating display hinders development of a cognitive map. The stability of a north-up alignment aids the acquisition of a cognitive map, but there is a cost associated with the mental rotation of the display to a track-up alignment for tasks involving the ego-centered forward view. The data also show that the visual momentum design captures the benefits and reduces the costs associated with the two traditional approaches.

Aretz, Anthony J.↗

NASA NTRS1988

A high-resolution gamma-ray and hard X-ray spectrometer for solar flare observations in Max 1991

A long duration balloon flight instrument for Max 1991 designed to study the acceleration of greater than 10 MeV ions and greater than 15 keV electrons in solar flares through high resolution spectroscopy of the gamma ray lines and hard X-ray and gamma ray continuum is described. The instrument, HIREGS, consists of an array of high-purity, n-type coaxial germanium detectors (HPGe) cooled to less than 90 K and surrounded by a bismuth germanate (BGO) anticoincidence shield. It will cover the energy range 15 keV to 20 MeV with keV spectral resolution, sufficient for accurate measurement of all parameters of the expected gamma ray lines with the exception of the neutron capture deuterium line. Electrical segmentation of the HPGe detector into a thin front segment and a thick rear segment, together with pulse-shape discrimination, provides optimal dynamic range and signal-to-background characteristics for flare measurements. Neutrons and gamma rays up to approximately 0.1 to 1 GeV can be detected and identified with the combination of the HPGe detectors and rear BGO shield. The HIREGS is planned for long duration balloon flights (LDBF) for solar flare studies during Max 1991. The two exploratory LDBFs carried out at mid-latitudes in 1987 to 1988 are described, and the LDBFs in Antarctica, which could in principle provide 24 hour/day solar coverage and very long flight durations (20 to 30 days) because of minimal ballast requirements are discussed.

Lin, R. P.↗

NASA NTRS2007

Analysis of Cometary Dust Impact Residues in the Aluminum Foil Craters of Stardust

In January 2006, the sample return capsule from NASA s Stardust spacecraft successfully returned to Earth after its seven year mission to comet Wild-2. While the principal capture medium for comet dust was low-density graded silica aerogel, the 1100 series aluminum foil (approximately 100 m thick) which wrapped around the T6064 aluminum frame of the sample tray assembly (STA) contains micro-craters that constitute an additional repository for Wild-2 dust. Previous studies of similar craters on spacecraft surfaces, e.g. the Long Duration Exposure Facility (LDEF), have shown that impactor material can be preserved for elemental and mineralogical characterization, although the quantity of impact residue in Stardust craters far exceeds previous missions. The degree of shock-induced alteration experienced by the Wild-2 particles impacting on foil will generally be greater than for those captured in the low-density aerogel. However, even some of the residues found in LDEF craters showed not only survival of crystalline silicates but even their solar flare tracks, which are extremely fragile structures and anneal at around 600 C. Laboratory hypervelocity experiments, using analogues of Wild-2 particles accelerated into flight-grade foils under conditions close to those of the actual encounter, showed retention of abundant projectile residues at the Stardust encounter velocity of 6.1 km/s. During the preliminary examination (PE) of the returned foils, using optical and electron microscopy studies, a diverse range in size and morphologies of micro-craters was identified. In this abstract we consider the state of residue preservation in a diverse range of craters with respect to their elemental composition and inferred mineralogy of the original projectiles.

Graham, G. A.↗

NASA NTRSDate not supplied

Windform® XT 2.0 Use as 3U CubeSat Primary Structure

CubeSats provide a platform for small-scale space research and technology demonstration at reduced complexity, cost, and development time. These advantages drove the NASA Langley Research Center (LaRC) to develop and launch the GPX2 3U CubeSat to explore the viability of using Commercial Off-The-Shelf (COTS) differential GPS (dGPS) in low earth orbit. To reduce manufacturing costs and increase design flexibility, the project chose additive manufactured Windform® XT 2.0 as the primary bus material rather than traditional subtractive manufactured (milled) metal. The bus is a two-part, Selective Laser Sintered, 3D-print structure consisting of a single-piece, five-walled chassis and single-walled cover. The bus was specially designed to allow the project to accommodate the payload electronics stack as well as antennas, receivers, and deployable mechanisms. By using an additive manufactured solution, LaRC was able to design in features unrealizable through traditional milling, with a lead-time of roughly two weeks. In comparison, traditional subtractive manufacturing limits geometry options due to toolpath reach and bus construction would have required multiple components for each wall. This would have resulted in a more costly, longer lead-time article with more joints, fasteners, and complexity with a commensurate increase in overall mass. A number of lessons-learned were captured during the design, analysis, and testing of the GPX2 CubeSat covering thermal and structural analysis, vibration modeling, and geometric tolerancing. Additionally, a variety of material testing and verification were performed before and during spacecraft design and integration to assure the suitability of Windform® XT 2.0 for the launch and mission environments. This article provides the highlights of designing and testing the GPX2 bus.

CubeSat↗

NASA NTRS1993

Management of Knowledge Representation Standards Activities

Ever since the mid-seventies, researchers have recognized that capturing knowledge is the key to building large and powerful AI systems. In the years since, we have also found that representing knowledge is difficult and time consuming. In spite of the tools developed to help with knowledge acquisition, knowledge base construction remains one of the major costs in building an Al system: For almost every system we build, a new knowledge base must be constructed from scratch. As a result, most systems remain small to medium in size. Even if we build several systems within a general area, such as medicine or electronics diagnosis, significant portions of the domain must be represented for every system we create. The cost of this duplication of effort has been high and will become prohibitive as we attempt to build larger and larger systems. To overcome this barrier we must find ways of preserving existing knowledge bases and of sharing, re-using, and building on them. This report describes the efforts undertaken over the last two years to identify the issues underlying the current difficulties in sharing and reuse, and a community wide initiative to overcome them. First, we discuss four bottlenecks to sharing and reuse, present a vision of a future in which these bottlenecks have been ameliorated, and describe the efforts of the initiative's four working groups to address these bottlenecks. We then address the supporting technology and infrastructure that is critical to enabling the vision of the future. Finally, we consider topics of longer-range interest by reviewing some of the research issues raised by our vision.

Patil, Ramesh S.↗

NASA NTRS1977

The influence of autoionization accompanied by excitation on dielectronic recombination and ionization equilibrium

In the process of dielectronic recombination, the doubly excited state formed by radiationless capture may autoionize preferentially into an excited state of the recombining ion. This additional autoionization process has not been discussed in previous treatments of dielectronic recombination. The dielectronic recombination rates for certain nonhydrogenic Fe ions, although still larger than the direct radiative recombination rates, are found to be substantially reduced by the inclusion of the additional autoionization rate in the branching ratio for the stabilizing radiative transition. Consequently, the temperatures of maximum equilibrium abundance are significantly lower than those predicted by recent calculations. Finally, the radiative energy loss rate coefficients are calculated for radiation processes involving electron Fe-ion collisions in high-temperature plasmas. Electron impact excitation of resonance line radiation is the dominant radiative cooling mechanism in steady-state plasmas at temperatures where ions with bound electrons are abundant. However, it is found that the radiation emitted during dielectronic recombination can be more important than direct recombination radiation and bremsstrahlung.

Jacobs, V. L.↗

NASA NTRS1980

Study of radiation induced deep-level defects in proton irradiated AlGaAs-GaAs solar cells

Radiation induced deep-level defects (both electron and hole traps) in proton irradiated AlGaAs-GaAs p-n junction solar cells are investigated along with the correlation between the measured defect parameters and the solar cell performance parameters. The range of proton energies studied was from 50 KeV to 10 MeV and the proton fluence was varied from 10 to the 10th power to 10 to the 13th power P/sq cm. Experimental tools employed include deep-level transient spectroscopy, capacitance-voltage, current voltage, and SEM-EBIC methods. Defect and recombination parameters such as defect density and energy level, capture cross section, carrier lifetimes and effective hole diffusion lengths in n-GaAs LPE layers were determined from these measurements.

Li, S. S.↗

NASA NTRS2017

Multispectral Snapshot Imagers Onboard Small Satellite Formations for Multi-Angular Remote Sensing

Multispectral snapshot imagers are capable of producing 2D spatial images with a single exposure at selected, numerous wavelengths using the same camera, therefore operate differently from push broom or whiskbroom imagers. They are payloads of choice in multi-angular, multi-spectral imaging missions that use small satellites flying in controlled formation, to retrieve Earth science measurements dependent on the targets Bidirectional Reflectance-Distribution Function (BRDF). Narrow fields of view are needed to capture images with moderate spatial resolution. This paper quantifies the dependencies of the imagers optical system, spectral elements and camera on the requirements of the formation mission and their impact on performance metrics such as spectral range, swath and signal to noise ratio (SNR). All variables and metrics have been generated from a comprehensive, payload design tool. The baseline optical parameters selected (diameter 7 cm, focal length 10.5 cm, pixel size 20 micron, field of view 1.15 deg) and snapshot imaging technologies are available. The spectral components shortlisted were waveguide spectrometers, acousto-optic tunable filters (AOTF), electronically actuated Fabry-Perot interferometers, and integral field spectrographs. Qualitative evaluation favored AOTFs because of their low weight, small size, and flight heritage. Quantitative analysis showed that waveguide spectrometers perform better in terms of achievable swath (10-90 km) and SNR (greater than 20) for 86 wavebands, but the data volume generated will need very high bandwidth communication to downlink. AOTFs meet the external data volume caps well as the minimum spectral (wavebands) and radiometric (SNR) requirements, therefore are found to be currently feasible in spite of lower swath and SNR.

Nag, Sreeja↗

NASA NTRS1975

Solar gamma rays

Calculations are presented for the production of gamma-ray lines and continuum emission in solar flares. The interaction models used in the calculations are described, neutron-producing reactions are identified, and formation of the 2.2-MeV line is analyzed. The most important prompt gamma-ray lines that can be observed during solar flares are determined, and the production of gamma-ray continuum emission by electron-proton bremsstrahlung is examined. The results are compared with data on the solar flare of August 4, 1972, to deduce the number and spectrum of accelerated particles at the sun as well as the energy deposited by them in the solar atmosphere. Problems concerning the formation of the 0.51-MeV line by positron annihilation are investigated, and estimates are made for the high-energy gamma-ray and neutron fluxes (at earth) produced by the August 4 flare. The main findings for that flare are: (1) the strongest line, at 2.2 MeV, was due to neutron capture by protons in the photosphere; (2) the intensity of that line depended on the photospheric He-3 abundance; (3) the neutrons were produced mainly in proton-alpha reactions by accelerated particles with energies in excess of 30 MeV/nucleon; and (4) the strongest prompt lines were due to deexcitation of excited states in C-12, O-16, and N-15.

Ramaty, R.↗

NASA NTRS2018

Evaluation of Commercial-Off-The-Shelf (COTS) Electronics for Extreme Cold Environments

Deep space and Icy Moon missions (Titan, Enceladus, Ceres, Europa, & Ganymede) will need qualified extreme environment capable components for electronic systems located in extremities of their rovers and spacecraft. Commercial off the shelf (COTS) components would be advantageous to use for some aspects of such projects, given that they are easier to procure and offer a broad range of functionalities. Furthermore, theoretical and experimental data suggest that many COTS parts are capable of operation, and not just storage, at temperatures well beyond the manufacturer specified temperature limits. To help address the challenges presented at near cryogenic temperatures, a COTS selection knowledge base is being developed to estimate the performance of COTS components within cold environments. The knowledge base captures queries from a range of information sources such as cold functionality test results for part types and families, theoretical and experimental literature reviews and key findings are summarized here. In addition, a selection of components are planned to be examined for their performance to near cryogenic temperatures to generate a methodology for identification and verification of the COTS candidates. As the qualification of COTS parts for extreme environments can be very costly, this knowledge base can serve to reduce qualification time and cost by pre-selecting and limiting candidates.

Mojarradi, Mohammad↗

NASA NTRS2020

Capturing an Evolving Nebular Environment: A Petrographic and Geochemical Study of a Type A, B & C CAI

Calcium, Aluminum-rich Inclusions (CAIs) were the first formed solids in our Solar System, with mineral assemblages reflecting the first phases predicted to condense out of a hot nebular gas of Solar composition. Geochemical, textural and crystallographic information in CAIs can be used to constrain the temperature, pressure, and composition (e.g., oxygen fugacity) of the gaseous reservoir(s) from which they formed, as well as any secondary (nebular and parent body) processes they underwent. Coordinated geochemical and textural analyses provide information on nebular conditions (i.e., astrophysical environments and dynamics of nebular gas reservoirs) in which these CAIs formed. In order to better understand the evolution of nebular reservoirs at the time of CAI formation, we analyzed a Type A, B and C CAI using Electron Probe Micro-Analyzer (EPMA) and Electron BackScatter Diffraction (EBSD) at NASA Johnson Space Center (JSC).

Comins, M. B.↗

NASA NTRS2019

ATLAS Flight Science Receiver Algorithms

This is the basis document for the ATLAS Receiver Algorithms. ATLAS is the single instrument on the ICESat-2 mission. The Receiver (Rx) Algorithms select the signal location in real-time and instruct the hardware to telemeter a vertical band of received time-tags about this signal location. The algorithms are implemented in the Flight Software (FSW) and in the hardware of the Photon Counting Electronics (PCE) cards. The sole purpose of the algorithms is to reduce the telemetry data volume to fit within the downlink constraint while maximizing the probability of downlinking surface signal. All versions of the Receiver Algorithms from version 2.8 onward incorporate our best knowledge of the ATLAS hardware at this time. It presents algorithms that, based on current Simulator testing, satisfy all of the requirements for the Rx Algorithms. Testing during ATLAS Instrument Integration and Testing with the hardware and software implementation of the Rx Algorithms revealed characteristics and responses that required changes to the Rx Algorithms and this document, which are captured in the change record below.All relevant documentation for the Receiver Algorithms can be found on the ICESat-2 Technical Data Management System (TDMS) under the ATLAS Algorithms subsystem.The launch version of the FSW (version 3.1.0) is based upon version 3.7c of this document.

Mcgarry, Jan L.↗

NASA NTRS2000

Video Based Sensor for Tracking 3-Dimensional Targets

Video-Based Sensor for Tracking 3-Dimensional Targets The National Aeronautics and Space Administration's (NASAs) Marshall Space Flight Center (MSFC) has been developing and testing video-based sensors for automated spacecraft guidance for several years, and the next generation of video sensor will have tracking rates up to 100 Hz and will be able to track multiple reflectors and targets. The Video Guidance Sensor (VGS) developed over the past several years has performed well in testing and met the objective of being used as the terminal guidance sensor for an automated rendezvous and capture system. The first VGS was successfully tested in closed-loop 3-degree-of-freedom (3- DOF) tests in 1989 and then in 6-DOF open-loop tests in 1992 and closed-loop tests in 1993-4. Development and testing continued, and in 1995 approval was given to test the VGS in an experiment on the Space Shuttle. The VGS flew in 1997 and in 1998, performing well for both flights. During the development and testing before, during, and after the flight experiments, numerous areas for improvement were found. The VGS was developed with a sensor head and an electronics box, connected by cables. The VGS was used in conjunction with a target that had wavelength-filtered retro-reflectors in a specific pattern, The sensor head contained the laser diodes, video camera, and heaters and coolers. The electronics box contained a frame grabber, image processor, the electronics to control the components in the sensor head, the communications electronics, and the power supply. The system works by sequentially firing two different wavelengths of laser diodes at the target and processing the two images. Since the target only reflects one wavelength, it shows up well in one image and not at all in the other. Because the target's dimensions are known, the relative positions and attitudes of the target and the sensor can be computed from the spots reflected from the target. The system was designed to work from I meter out to I 10 meters. The VGS was mounted on the Space Shuttle while its target was mounted on the Spartan free-flyer carried on the same Shuttle flight. The VGS tracked the Spartan at ranges up to 170m, and the VGS range data very closely matched the range data from the Hand-Held Laser- Rangefinder used by the astronauts on board the Shuttle. While the VGS was designed primarily as a terminal guidance sensor for an automated spacecraft, it could be applied to other uses. It could be used as an alignment aid for an operator of a remote system (giving position and attitude feedback data, as well as a camera view of the target), as a feedback system for a robotic arm, or for automated vehicle guidance. The next generation VGS, with its higher tracking rates, smaller size, and lower power could be used in more places than the original VGS, and by using LED's instead of laser diodes, the system would be eye-safe at any range. Other possible uses include tracking 3-dimensional objects with retro-reflectors mounted at various locations or motion analysis by placing several retro-reflectors on the moving object and tracking them at high speeds. There are few sensors capable of performing tasks similar to those the VGS can perform, and the next generation VGS will be even more capable than the original. Some of this work is previously presented in the papers.

Howard, R. T.↗