SEARCH · Search NASA

Results for “Energy Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS2003

A One Billion Year Martian Climate Model: The Importance of Seasonally Resolved Polar Caps and the Role of Wind

Wind deflation and deposition are powerful agents of surface change in the present Mars climate regime. Recent studies indicate that, while the distribution of regions of potential deflation (or erosion) and deposition is remarkably insensitive to changes in orbital parameters (obliquity, timing of perihelion passage, etc.), rates of aeolian surface modification may be highly sensitive to these parameters even if the atmospheric mass remains constant. But previous work suggested the atmospheric mass is likely to be sensitive to obliquity, especially if a significant mass of carbon dioxide can be stored in the regolith or deposited in the form of massive polar caps. Deflation and erosion are highly sensitive to surface pressure, so feedback between orbit variations and surface pressure can greatly enhance the sensitivity of aeolian modification rates to orbital parameters. We used statistics derived from a 1 Gyr orbital integration of the spin axis of Mars, coupled with 3D general circulation models (GCMs) at a variety of orbital conditions and pressures, to explore this feedback. We also employed a seasonally resolved 1D energy balance model to illuminate the gross characteristics of the longterm atmospheric evolution, wind erosion and deposition over one billion years. We find that seasonal polar cycles have a critical influence on the ability for the regolith to release CO2 at high obliquities, and find that the atmospheric CO2 actually decreases at high obliquities due to the cooling effect of polar deposits at latitudes where seasonal caps form. At low obliquity, the formation of massive, permanent polar caps depends critically on the values of the frost albedo, A(sub frost), and frost emissivity, E(sub frost). Using our 1D model with values of A(sub frost) = 0.67 and E(sub frost) = 0.55, matched to the NASA Ames GCM results, we find that permanent caps only form at low obliquities (< 10 degrees). Thus, contrary to expectations, the Martian atmospheric pressure is remarkable static over time, and decreases both at high and low obliquity. Also, from our one billion year orbital model, we present new results on the fraction of time Mars is expected to experience periods of high and low obliquity. Finally, using GCM runs at a variety of pressures, we examine the likely role of wind erosion under an early more massive Martian atmosphere.

J C Armstrong↗

NASA NTRS1984

Heat and mass transfer in combustion - Fundamental concepts and analytical techniques

Fundamental combustion phenomena and the associated flame structures in laminar gaseous flows are discussed on physical bases within the framework of the three nondimensional parameters of interest to heat and mass transfer in chemically-reacting flows, namely the Damkoehler number, the Lewis number, and the Arrhenius number which is the ratio of the reaction activation energy to the characteristic thermal energy. The model problems selected for illustration are droplet combustion, boundary layer combustion, and the propagation, flammability, and stability of premixed flames. Fundamental concepts discussed include the flame structures for large activation energy reactions, S-curve interpretation of the ignition and extinctin states, reaction-induced local-similarity and non-similarity in boundary layer flows, the origin and removal of the cold boundary difficulty in modeling flame propagation, and effects of flame stretch and preferential diffusion on flame extinction and stability. Analytical techniques introduced include the Shvab-Zeldovich formulation, the local Shvab-Zeldovich formulation, flame-sheet approximation and the associated jump formulation, and large activation energy matched asymptotic analysis. Potentially promising research areas are suggested.

Law, C. K.↗

NASA NTRS1984

Modeling glacial climates

Mathematical climate modelling has matured as a discipline to the point that it is useful in paleoclimatology. As an example a new two dimensional energy balance model is described and applied to several problems of current interest. The model includes the seasonal cycle and the detailed land-sea geographical distribution. By examining the changes in the seasonal cycle when external perturbations are forced upon the climate system it is possible to construct hypotheses about the origin of midlatitude ice sheets and polar ice caps. In particular the model predicts a rather sudden potential for glaciation over large areas when the Earth's orbital elements are only slightly altered. Similarly, the drift of continents or the change of atmospheric carbon dioxide over geological time induces radical changes in continental ice cover. With the advance of computer technology and improved understanding of the individual components of the climate system, these ideas will be tested in far more realistic models in the near future.

North, G. R.↗

NASA NTRS1985

Stopping relativistic Xe, Ho, Au and U nuclei in nuclear emulsions

Nuclei of Xe-54, Ho-67, Au-79 and U-92 accelerated at the Bevalac to energies between 1200 and 900 MeV/n were stopped in nuclear emulsions. The observed residual ranges were compared with those calculated from various models of energy loss and shown to be most consistent with a calculation that includes those higher order correction terms proposed previously to describe the energy loss of highly charged particles, for which the first Born approximation is not valid.

Waddington, C. J.↗

NASA NTRS1985

Stopping relativistic Xe, Ho, Au, and U nuclei in nuclear emulsions

Nuclei of Xe-54, Ho-67, Au-79 and U-92 accelerated at the Bevalac to energies between 1200 and 900 MeV/n were stopped in nuclear emulsions. The observed residual ranges were compared with those calculated from various models of energy loss and shown to be most consistent with a calculation that includes those higher order correction terms proposed previously to describe the energy loss of highly changed particles, for which the first Born approximation is not valid.

Waddington, C. J.↗

NASA NTRS1990

LOX vaporization in high-pressure, hydrogen-rich gas

LOX droplet vaporization in high-pressure hydrogen-rich gas is analyzed, with special attention to thermodynamic effects which compel the surface to heat to the critical state and to supercritical vaporization processes on heating to criticality. Subcritical vaporization is modeled using a quasi-steady diffusion-controlled gas-phase transport formulation coupled to an effective-conductivity internal-energy-transport model accounting for circulation effects. It is demonstrated how the droplet surface might heat to the critical state, for ambient pressures slightly greater than the critical pressure of oxygen, such that the bulk of propellant within the droplet remains substantially below the critical mixing temperature.

Litchford, Ron J.↗

NASA NTRSDate not supplied

Atmospheric Escape from Magnetized Rocky Exoplanets

Recent Kepler and TESS observations discovered many rocky exoplanets in habitable zones around active main-sequence stars. The upper atmospheres of exoplanets are subject to two important energy sources derived from their host stars. First, the stellar photon flux in the X-ray and XUV bands ionizes and heats the upper atmosphere, driving atmospheric heating, affecting the conductance, and enhancing atmospheric escape. Second, the stellar wind’s interaction with the exoplanet’s intrinsic magnetic field transfers energy to the atmosphere through field aligned currents and Poynting flux. That energy is dissipated in the high latitude cusp and auroral regions through Joule heating which can inflate the atmosphere and also enhance the atmospheric escape rate. This presentation will discuss recent advances in modeling these energy inputs and their consequences for exoplanetary habitability. Also, I will discuss the development of a new model, the (exo) PLANETary Ionosphere-Thermosphere Tool for Research (PLANET-ITTR) and some early results from it.

William Danchi↗

NASA NTRS1992

Multiple-scattering effects in quasielastic alpha-4He scattering

A multiple-scattering series for describing the quasielastic peak in nucleus-nucleus collisions is derived using the high-energy optical model. The effects of multiple knockout of target nucleons and internal excitation of the projectile are studied and found to be important for large energy loss and momentum transfers in inclusive alpha-4He scattering at 7 GeV/c. An approximate evaluation of higher-order inelastic collision terms is considered for forward-peaked wave functions and is demonstrated to be accurate.

NASA Discipline Radiation Health↗

NASA NTRS2022

Probing the High-energy Gamma-Ray Emission Mechanism in the Vela Pulsar via Phase-resolved Spectral and Energy-dependent Light-curve Modeling

Recent kinetic simulations sparked a debate regarding the emission mechanism responsible for pulsed GeV γ-ray emission from pulsars. Some models invoke curvature radiation, while other models assume synchrotron radiation in the current sheet. We interpret the curved spectrum of the Vela pulsar as seen by H.E.S.S. II (up to ∼100 GeV) and the Fermi Large Area Telescope to be the result of curvature radiation due to primary particles in the pulsar magnetosphere and current sheet. We present phase-resolved spectra and energy-dependent light curves using an extended slot gap and current-sheet model, invoking a step function for the accelerating electric field as motivated by kinetic simulations. We include a refined calculation of the curvature radius of particle trajectories in the lab frame, impacting the particle transport, predicted light curves, and spectra. Our model reproduces the decrease of the flux of the first peak relative to the second one, evolution of the bridge emission, near-constant phase positions of peaks, and narrowing of pulses with increasing energy. We can explain the first of these trends because we find that the curvature radii of the particle trajectories in regions where the second γ-ray light-curve peak originates are systematically larger than those associated with the first peak, implying that the spectral cutoff of the second peak is correspondingly larger. However, an unknown azimuthal dependence of the E field, as well as uncertainty in the precise spatial origin of the GeV emission, precludes a simplistic discrimination of emission mechanisms.

Monica Barnard↗

NASA NTRS1976

Traps in Al2O3 detected by tunneling

A structure, quite different from inelastic tunneling peaks, has been observed in electron-tunneling spectra of MOM junctions. A capacitance peak is associated with this structure, which is attributed to traps in the oxide at energies smaller than those previously reported. The C-V characteristics calculated using a single-energy trap model agree with experimental results; however, no satisfactory explanation has yet been found to account for the strong temperature dependence of the trap energy levels.

Skarlatos, Y.↗

NASA NTRS1983

Prediction of impact force and duration during low velocity impact on circular composite laminates

Two simple and improved models--energy-balance and spring-mass--were developed to calculate impact force and duration during low velocity impact of circular composite plates. Both models include the contact deformation of the plate and the impactor as well as bending, transverse shear, and membrane deformations of the plate. The plate was transversely isotropic graphite/epoxy composite laminate and the impactor was a steel sphere. Calculated impact forces from the two analyses agreed with each other. The analyses were verified by comparing the results with reported test data.

Shivakumar, K. N.↗

NASA NTRS1985

Prediction of impact force and duration due to low-velocity impact on circular composite laminates

Two simple and improved models - energy-balance and spring-mass - were developed to calculate impact force and duration during low velocity impact of circular composite plates. Both models include the contact deformation of the plate and the impactor as well as bending, transverse shear, and membrane deformations of the plate. The plate was transversely isotropic graphite/epoxy composite laminate and the impactor was a steel sphere. Calculated impact forces from the two analyses agreed with each other. The analyses were verified by comparing the results with reported test data.

Shivakumar, K. N.↗

NASA NTRS1991

Impact of diet on the design of waste processors in CELSS

The preliminary results of a design analysis for a waste processor which employs existing technologies and takes into account the constraints of human diet are presented. The impact of diet is determined by using a model and an algorithm developed for the control and management of diet in a Controlled Ecological Life Support System (CELSS). A material and energy balance model for thermal oxidation of waste is developed which is consistent with both physical/chemical methods of incineration and supercritical water oxidation. The two models yield quantitative analysis of the diet and waste streams and the specific design parameters for waste processors, respectively. The results demonstrate that existing technologies can meet the demands of waste processing, but the choice and design of the processors or processing methods will be sensitive to the constraints of diet. The numerical examples are chosen to display the nature and extent of the gap in the available experiment information about CELSS requirements.

Waleh, Ahmad↗

NASA NTRS2017

Multi-Organization Multi-Discipline Effort Developing a Mitigation Concept for Planetary Defense

There have been significant recent efforts in addressing mitigation approaches to neutralize Potentially Hazardous Asteroids (PHA). One such research effort was performed in 2015 by an integrated, inter-disciplinary team of asteroid scientists, energy deposition modeling scientists, payload engineers, orbital dynamist engineers, spacecraft discipline engineers, and systems architecture engineer from NASAs Goddard Space Flight Center (GSFC) and the Department of Energy (DoE) National Nuclear Security Administration (NNSA) laboratories (Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratories (LLNL) and Sandia National Laboratories). The study team collaborated with GSFCs Integrated Design Centers Mission Design Lab (MDL) which engaged a team of GSFC flight hardware discipline engineers to work with GSFC, LANL, and LLNL NEA-related subject matter experts during a one-week intensive concept formulation study in an integrated concurrent engineering environment. This team has analyzed the first of several distinct study cases for a multi-year NASA research grant. This Case 1 study references the Near-Earth Asteroid (NEA) named Bennu as the notional target due to the availability of a very detailed Design Reference Asteroid (DRA) model for its orbit and physical characteristics (courtesy of the Spectral Interpretation, Resource Identification, Security-Regolith Explorer (OSIRIS-REx) mission team). The research involved the formulation and optimization of spacecraft trajectories to intercept Bennu, overall mission and architecture concepts, and high-fidelity modeling of both kinetic impact (spacecraft collision to change a NEAs momentum and orbit) and nuclear detonation effects on Bennu, for purposes of deflecting Bennu.

Planetary Defense↗

NASA NTRS1988

X-ray emission from the flare star binary Gliese 867 A

Coronal X-ray emission from the BY Draconis type dMe flare star G867 A was observed on three successive days in May 1980 with the Imaging Proportional Counter on the Einstein Observatory. A 40-percent decrease in the quiescent state X-ray intensity of the star was detected over a three-day period. It is suggested that this slow quiescent state X-ray intensity variation may be the X-ray analogue of the BY Draconis variability observed in the optical band and may be explained by the star spot model. The energy spectra of the star were obtained for the three days and are best fitted by a two-temperature Raymond-Smith thermal model. There is some indication of spectral variations in the low temperature component. Implications of these results are briefly discussed.

Agrawal, P. C.↗

NASA NTRS1992

Multiple-scattering effects in quasielastic alpha-He-4 scattering

A multiple-scattering series for describing the quasielastic peak in nucleus-nucleus collisions is derived using the high-energy optical model. The effects of multiple knockout of target nucleons and internal excitation of the projectile are studied and found to be important for large energy loss and momentum transfers in inclusive alpha-He-4 scattering at 7 GeV/c. An approximate evaluation of higher-order inelastic collision terms is considered for forward-peaked wave functions and is demonstrated to be accurate.

Cucinotta, Francis A.↗

NASA NTRS1997

A Model of the THUNDER Actuator

A THUNDER actuator is a composite of three thin layers, a metal base, a piezoelectric wafer and a metal top cover, bonded together under pressure and at high temperature with the LaRC SI polyimid adhesive. When a voltage is applied between the metal layers across the PZT the actuator will bend and can generate a force. This document develops and describes an analytical model the transduction properties of THUNDER actuators. The model development is divided into three sections. First, a static model is described that relates internal stresses and strains and external displacements to the thermal pre-stress and applied voltage. Second, a dynamic energy based model is described that allows calculation of the resonance frequencies, developed force and electrical input impedance. Finally, a fully coupled electro-mechanical transducer model is described. The model development proceeds by assuming that both the thermal pre-stress and the piezoelectric actuation cause the actuator to deform in a pure bend in a single plane. It is useful to think of this as a two step process, the actuator is held flat, differential stresses induce a bending moment, the actuator is released and it bends. The thermal pre-stress is caused by the different amounts that the constituent layers shrink due to their different coefficients of thermal expansion. The adhesive between layers sets at a high temperature and as the actuator cools, the metal layers shrink more than the PZT. The PZT layer is put into compression while the metal layers are in tension. The piezoelectric actuation has a similar effect. An applied voltage causes the PZT layer to strain, which in turn strains the two metal layers. If the PZT layer expands it will put the metal layers into tension and PZT layer into compression. In both cases, if shear force effects are neglected, the actuator assembly will experience a uniform in-plane strain. As the materials each have a different elastic modulus, different stresses will develop in each layer and these stresses will induce a bending moment. When the actuator is released from its flat configuration, the differential stresses are relieved as the actuator bends.

Curtis, Alan R. D.↗

NASA NTRS1987

A multiple-time-scale turbulence model based on variable partitioning of turbulent kinetic energy spectrum

A multiple-time-scale turbulence model of a single point closure and a simplified split-spectrum method is presented. In the model, the effect of the ratio of the production rate to the dissipation rate on eddy viscosity is modeled by use of the multiple-time-scales and a variable partitioning of the turbulent kinetic energy spectrum. The concept of a variable partitioning of the turbulent kinetic energy spectrum and the rest of the model details are based on the previously reported algebraic stress turbulence model. Example problems considered include: a fully developed channel flow, a plane jet exhausting into a moving stream, a wall jet flow, and a weakly coupled wake-boundary layer interaction flow. The computational results compared favorably with those obtained by using the algebraic stress turbulence model as well as experimental data. The present turbulence model, as well as the algebraic stress turbulence model, yielded significantly improved computational results for the complex turbulent boundary layer flows, such as the wall jet flow and the wake boundary layer interaction flow, compared with available computational results obtained by using the standard kappa-epsilon turbulence model.

Kim, S.-W.↗