Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Landing gear energy absorption system

A landing pad system is described for absorbing horizontal and vertical impact forces upon engagement with a landing surface where circumferentially arranged landing struts respectively have a clevis which receives a slidable rod member and where the upper portion of a slidable rod member is coupled to the clevis by friction washers which are force fit onto the rod member to provide for controlled constant force energy absorption when the rod member moves relative to the clevis. The lower end of the friction rod is pivotally attached by a ball and socket to a support plate where the support plate is arranged to slide in a transverse direction relative to a housing which contains an energy absorption material for absorbing energy in a transverse direction.

Hansen, Christopher P.↗
NASA NTRS2016

Crystallographic Characterization of Extraterrestrial Materials by Energy-Scanning X-ray Diffraction

We have continued our long-term project using X-ray diffraction to characterize a wide range of extraterrestrial samples. The stationary sample method with polychromatic X-rays is advantageous because the irradiated area of the sample is always same and fixed, meaning that all diffraction spots occur from the same area of the sample, however, unit cell parameters cannot be directly obtained by this method though they are very important for identification of mineral and for determination of crystal structures. In order to obtain the cell parameters even in the case of the sample stationary method, we apply energy scanning of a micro-beam of monochromatic SR at SPring-8.

Hagiya, Kenji↗
DOE OSTI2026

Upcycling mixed cathode materials to high-energy-density LiFe 0.75 Mn 0.25 PO 4

To address the demand for next-generation cathode materials with high energy density, upcycling LiFePO 4 into LiFe 0.75 Mn 0.25 PO 4 has attracted considerable attention. Nevertheless, existing strategies have yet to achieve both morphology and full elemental recovery under mild ambient conditions. Here, we report an upcycling route that can address this issue by combining leaching and a high-temperature treatment process. The upcycled LiFe 0.75 Mn 0.25 PO 4 exhibits enlarged lattice spacing and a high discharge plateau, and it delivers an energy density of 563.7 Wh/kg, 40.3 Wh/kg higher than recycled LiFePO 4 , which indicates the high value of the proposed upcycling strategy. At 1 C, LiFe 0.75 Mn 0.25 PO 4 also exhibits excellent cycling stability of 91% over 700 cycles. Techno-economic analysis also indicates impressive economic and environmental benefits, including 10.4% less raw materials usage and 12.2% less energy consumption and wastewater generation. This work demonstrates a scalable and economic upcycling strategy and provides a promising pathway for sustainable battery upcycling compatible with industrial conditions.

LMFP↗
DOE OSTI2022

Subcomponent Validation of Composite Joints for Marine Energy Structures

The Marine Energy Advanced Materials project addresses the barriers and uncertainties facing marine renewable energy developers in using composite materials for load-bearing structures. Sponsored by the U.S. Department of Energy's Water Power Technologies Office, the multiyear project comprises of collaborators from the National Renewable Energy Laboratory (NREL), Sandia National Laboratories, Pacific Northwest National Laboratory (PNNL), Montana State University (MSU), Florida Atlantic University (FAU), and industry stakeholders. As part of the Marine Energy Advanced Materials project, marine renewable energy industry surveys and assessments were conducted to identify key materials and knowledge gaps that hinder the adoption of composite materials in marine renewable energy structures. Specific knowledge gaps highlighted for composite materials were environmental effects, fatigue strengths, and bonded and bolted interconnects (composite/composite and composite/metal). It was concluded that many of these gaps could be addressed through subcomponent validation; consequently, a program was developed at NREL with the goals of developing subcomponent validation methods for appropriate marine energy materials, which would improve the understanding of design allowables for full-scale structural components and joints. Ultimately, the aim is to reduce timelines and costs associated with full-scale structural validation efforts while also providing near-net-scale static and fatigue data of composite/metal subcomponents for marine renewable energy systems. To approach these goals, a testing program was developed at NREL to investigate a variety of materials and structural design details at the subcomponent scale to understand (a) the effects of harsh and corrosive marine energy environments and (b) the static and fatigue strengths of the complex geometries. The recent study from this testing program is perhaps the largest that has ever been conducted with respect to specimen scale and geographic diversity of underwater environmental conditions that the specimens were subjected to. A variety of specimen geometries were designed by NREL to highlight key features of multimaterial (composite/composite or metal/composite) interconnects that may be used in marine renewable energy structural designs. The designs used several different composite matrices, adhesives, and marine-grade steels, which were highlighted in the surveys as being the most appropriate for harsh marine environments. Composite panels were then manufactured at MSU, and were subsequently manufactured into test specimens by NREL. The specimens were shipped to FAU and PNNL for conditioning in ocean water tanks at various temperatures for an extended period. The specimens were then returned to NREL for structural validation. This presentation will provide an overview of recent advances within the testing program in terms of specimen design and test methods, and will discuss results and key findings of the subcomponent testing program to date at NREL.

adhesives↗
NASA NTRS1997

Optical Waveguide Solar Energy System for Lunar Materials Processing

This paper discusses results of our work on development of the Optical Waveguide (OW) Solar Energy System for Lunar Materials Processing. In the OW system as shown, solar radiation is collected by the concentrator which transfers the concentrated solar radiation to the OW transmission line consisting of low-loss optical fibers. The OW line transmits the solar radiation to the thermal reactor of the lunar materials processing plant. The feature of the OW system are: (1) Highly concentrated solar radiation (up to 104 suns) can be transmitted via flexible OW lines directly into the thermal reactor for materials processing: (2) Solar radiation intensity or spectra can be tailored to specific materials processing steps; (3) Provide solar energy to locations or inside of enclosures that would not otherwise have an access to solar energy; and (4) The system can be modularized and can be easily transported to and deployed at the lunar base.

Nakamura, T.↗
DOE OSTI2022

Colossal barocaloric effects with ultralow hysteresis in two-dimensional metal–halide perovskites

Pressure-induced thermal changes in solids—barocaloric effects—can be used to drive cooling cycles that offer a promising alternative to traditional vapor-compression technologies. Efficient barocaloric cooling requires materials that undergo reversible phase transitions with large entropy changes, high sensitivity to hydrostatic pressure, and minimal hysteresis, the combination of which has been challenging to achieve in existing barocaloric materials. Here, we report a new mechanism for achieving colossal barocaloric effects that leverages the large volume and conformational entropy changes of hydrocarbon order–disorder transitions within the organic bilayers of select two-dimensional metal–halide perovskites. Significantly, we show how the confined nature of these order–disorder phase transitions and the synthetic tunability of layered perovskites can be leveraged to reduce phase transition hysteresis through careful control over the inorganic–organic interface. The combination of ultralow hysteresis and high pressure sensitivity leads to colossal reversible isothermal entropy changes (>200 J kg -1 K -1 ) at record-low pressures (<300 bar).

36 MATERIALS SCIENCE↗
DOE OSTI2024

Simulation Studies of Electromagnetic Energy Absorption by Hydride Materials

This paper investigates the key parameters that contribute to electromagnetic (EM) energy absorption and heating of hydride materials which could be used to release hydrogen for use as a fuel. Our simulation study using COMSOL focuses on EM energy absorption and resulting temperature rise in a thin circular slab of hydride material using resonant dipole and loop antennas. Presented results delineate the effects of conductivity, relative permeability, antenna type and slab size on temperature rise when the distance and amount of RF power are kept fixed.

Brown, Michael A.↗
DOE OSTI2025

Polyethylene Furanoate ( PEF ) Production Using Nanowire Based Super Acid Catalysts

ABSTRACT In this article, bioplastic polyethylene furanoate (PEF) is synthesized using polycondensation of 2,5‐furandicarboxylic acid and ethylene glycol at a temperature of 220°C using a solid nanowire based super‐acid catalyst. The super acid catalyst is made by phosphating titania nanowires. Specifically, the reactions resulted in over 90% FDCA conversion and 85% PEF yield in a short period of 3 h using superacid catalysts at a loading of < 1% by wt. The mechanical properties of PEF, including glass transition temperature (84°C), melting point (210°C), and crystallinity (1.48 g/cm 3 ), demonstrate the high quality of the PEF produced. Barocaloric properties of resulting PEF polymers are also studied which show promise.

Kannapu, Hari Prasad Reddy [Advanced Energy Materi↗
DOE OSTI2021

Machine learned features from density of states for accurate adsorption energy prediction

Materials databases generated by high-throughput computational screening, typically using density functional theory (DFT), have become valuable resources for discovering new heterogeneous catalysts, though the computational cost associated with generating them presents a crucial roadblock. Hence there is a significant demand for developing descriptors or features, in lieu of DFT, to accurately predict catalytic properties, such as adsorption energies. Here, we demonstrate an approach to predict energies using a convolutional neural network-based machine learning model to automatically obtain key features from the electronic density of states (DOS). The model, DOSnet, is evaluated for a diverse set of adsorbates and surfaces, yielding a mean absolute error on the order of 0.1 eV. In addition, DOSnet can provide physically meaningful predictions and insights by predicting responses to external perturbations to the electronic structure without additional DFT calculations, paving the way for the accelerated discovery of materials and catalysts by exploration of the electronic space.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Applying energy justice metrics to photovoltaic materials research

Abstract Achieving the energy transition sustainably requires addressing how new technologies may impact justice in the energy system. The Justice Underpinning Science and Technology Research (JUST-R) metrics framework was recently proposed to aid researchers in considering justice in early-stage research on energy technologies; however, case study evaluations of the framework revealed a desire from researchers to see metrics specialized to particular fields of study. Here, we refine metrics from the JUST-R framework to enhance its applicability to photovoltaic (PV) materials research. Metrics are reorganized to align with aspects of the research process (e.g., research team or source materials). For most metrics, baseline values are suggested to enable researchers to compare their project to competing technologies or standards at their institutions. These refinements are integrated into a tool to facilitate easier understanding and evaluation of justice considerations in early-stage PV research, which can serve as a template for evaluating other energy technologies. Graphical abstract

14 SOLAR ENERGY↗
DOE OSTI2022

Mechanisms of stored energy release in silicon carbide materials neutron-irradiated at elevated temperatures

Understanding the stored energy release behavior of SiC is crucial for the design of SiC-based fuel cladding for light water reactors because stored energy release affects response during accident conditions. Differential scanning calorimetry was used to evaluate the stored energy of monolithic SiC and SiC fiber–reinforced SiC matrix composite variants following neutron irradiation under light water reactor–relevant dose and temperature conditions. The tests were performed at heating rates of 0.5, 3, and 20 K/min up to 1,273 K. The onset temperature of the energy release roughly corresponded to the irradiation temperature, and energy release was delayed as the heating rate increased. The monolithic and composite specimens exhibited similar stored energy release behavior up to ~1,000 K, and above that temperature, the energy release depended more on material type. The energy release measured in this study is below the material-specific heat capacity at temperatures below ~1,000 K but exceeds it under certain material and annealing conditions at temperatures above ~1,000 K. The amount of irradiation-induced volumetric swelling of the specimens was an indication of the total stored energy. Based on this observation, the energy release behavior was described by a swelling recovery model.

36 MATERIALS SCIENCE↗