Search NASA⌕ Search

SEARCH · Search NASA

Results for “Explainability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

UO 2 solubility and chemical interactions in molten LiCl-Li 2 O

Here, this study investigated the solubility of UO 2 in LiCl-2 wt% Li 2 O at 650 °C with O 2 partial pressures up to 114 torr. Experiments were run in which UO 2 powder was contacted with the molten salt for up to 120 h. Salt samples were taken and analyzed for U and corrosion product concentration using inductively coupled plasma mass spectrometry and for Li 2 O concentration using titration. The highest measured U concentration in the salt was 0.06 wt%, and O 2 partial pressure was observed to have little to no effect on the solubility. Increasing O 2 partial pressure did increase the concentration of corrosion products in the salt. The concentration of Li 2 O in the molten salt progressively decreased with time in contact with UO 2 . This can be explained by the formation of Li 2 UO 4 via reaction of UO 2 with Li 2 O.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Assessment of uranium nitride interatomic potentials

Uranium mononitride (UN) is a promising nuclear fuel due to its high fissile density, high thermal conductivity, and suitability for reprocessing. In this study, two uranium nitride interatomic potentials are assessed: Tseplyaev and Starikov's angular-dependent potential and Kocevski et al.'s embedded atom model potential. Predictions of the thermophysical and elastic properties of UN, UN 2 , and α- and β-U 2 N 3 computed using both potentials are assessed and compared to available experimental data. Notably, the Tseplyaev potential performs better with the energetic aspects of UN, e.g., specific heat capacity and point defect formation energies, whereas the Kocevski potential performs better with the structural aspects of UN, e.g., thermal expansion as well as with the elastic properties. The reasons why the Kocevski potential underestimates the UN specific heat are explained by examining the UN phonon properties modeled using both potentials. The Kocevski potential shows better identification of the mechanical stability ranges of UN, UN 2 , and α- and β-U 2 N 3 , reasonably predicting the melting point of UN and predicting stable structures for UN 2 and α- and β-U 2 N 3 . On the other hand, the Tseplyaev potential predicts a premature phase change of both UN and UN 2 and cannot stabilize α- nor β-U 2 N 3 . However, the Kocevski potential cannot predict a stable α-U phase and is thus not suitable for the calculation of formation energies for non-stoichiometric point defects.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Grain boundary self-diffusion and point defect interactions in α -U via molecular dynamics

Though metallic U-Zr fuel has been used in nuclear reactors since the 1960s, many of its fundamental and thermodynamic properties are still unknown. The a-U phase, which has a highly anisotropic crystal structure and physical properties, is present in U-Zr fuel. The character and behavior of a-U grain boundaries will strongly impact fuel thermophysical performance under irradiation. Here, we study the interaction of point defects with grain boundaries, diffusion along grain boundaries, and the predicted diffusional creep behavior of a-U via molecular dynamics. We calculate the segregation energy of vacancies and interstitials to grain boundaries and quantify the biased sink strength of the grain boundaries, and observe that this sink strength is not strongly dependent on the grain boundary orientation. We also find that grain boundary diffusivity is strongly dependent on the grain boundary energy and grain boundary orientation. The presence of point defects within the grain boundary can induce diffusion in grain boundaries with low formation energies and can enhance diffusion in high-energy grain boundaries. We also find that diffusional creep of a-U at prototypical metallic fuel operation conditions is extremely high and could help explain observed metallic fuel swelling behaviors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Suppression of irradiation hardening in tungsten-coated ferritic steel for fusion reactor blanket applications

W-coated reduced activation ferritic steels have been developed for use as plasma facing components in fusion reactor blankets, offering excellent sputtering resistance and structural strength. Previous high-temperature coating methods, such as diffusion bonding and brazing, caused interfacial deterioration due to thermal stress from mismatched thermal expansion between W and reduced activation ferritic steel. To address this, underwater explosive welding was introduced as a high-velocity cold process that joins dissimilar materials while maintaining a strong, thin interface without the thermal issues associated with traditional methods. In this study, the effects of neutron irradiation on the hardness and microstructure in W-coated F82H reduced activation ferritic steel (W/F82H) joined by underwater explosive welding are investigated. Following neutron irradiation at 290 °C, irradiation hardening is suppressed in W, F82H, and their interface within the W/F82H material. Furthermore, microstructural observations indicate that the recovery of work hardening and relaxation of elastic strain introduced during coating significantly contribute to the suppression of irradiation hardening in W/F82H. In conclusion, W/F82H exhibits significantly suppressed irradiation hardening compared with those in stand-alone materials. This suppression is explained by residual stress from thermal expansion mismatch and the unique microstructure at the interface. These results provide valuable insights for the development of more durable materials in nuclear fusion applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Origins of radiation-induced optical attenuation in neutron-irradiated single-crystal sapphire at elevated temperatures

Sapphire (α-Al 2 O 3 ) is a candidate fiber-optic sensor material for extreme temperature environments, potentially including those of nuclear reactors. However, its optical transmission under high-dose neutron irradiation is not well understood compared with that of conventional fused silica. This study examined dimensional changes, optical transmission, and irradiation-induced defects in neutron-irradiated α-Al 2 O 3 at temperatures of 298 °C to 688 °C and doses of 3.2 to 12 dpa. Although previous studies attributed radiation-induced attenuation (RIA) at the highest irradiation temperatures to increased optical scattering from radiation-induced voids, our findings indicate that scattering from neither voids nor dislocation loops can explain the measured attenuation. Instead, absorption due to aluminum vacancy centers appears more likely based on a comparison of the spectral features of the measured optical attenuation with previous literature. Significant c-axis swelling (5.51 % ± 0.83 %) was observed in the 12 dpa, 592 °C irradiated sample, much higher than earlier measurements, suggesting temperature sensor drift of 543 °C to 1,140 °C. Void patterning was predominantly observed along the a-axis, differing from previous studies on polycrystalline samples, which showed c-axis patterning. Dislocation loops evolved into network dislocations with increasing temperature and dose; voids formed within these structures, showing no size or density changes, indicating an atypical growth mechanism.

Neutron irradiation↗
DOE OSTI2025

Radiation-induced bowing of SiC/SiC composites under neutron flux gradients—integral experimental data for model validation

Here, the radiation-induced swelling of SiC and its composites, including strong dependencies on temperature and dose, can drive significant lateral bowing in the presence of temperature and/or dose gradients. In recent years, simulations have been performed to assess the extent of bowing in SiC composite light-water reactor (LWR) fuel cladding and boiling water reactor (BWR) channel boxes. However, to date, no integral experimental data exist to validate these models. This work provides the first experimental bowing evaluation of three ∼380 mm long SiC composite specimens irradiated under varying neutron dose gradients (∼50°C–60°C, 0.03–0.06 dpa): two tubes (∼9.8 mm diameter) and a miniature BWR channel box (∼30 mm square). The measured radiation-induced length swelling (∼0.3%–0.7% linear) was consistently 10%–21% higher than values obtained from 3D finite element structural analyses with inputs from 3D radiation transport calculations. This discrepancy could be at least partially explained by differences in dose rate (∼10 -8 dpa/s) compared to the literature data (∼10-6 dpa/s) used to establish the dose-to-swelling correlations in the model. Nevertheless, the modeled bowing magnitudes (<2 mm) obtained from finite element analyses and simple analytical equations were within the bounds of the experimental measurements for all specimens. With improved confidence in the ability to predict the structural response and measure the macroscopic deformations, future experiments will target transient bowing under neutron flux gradients at representative LWR temperatures and assess whether grid spacers can mitigate the tens of millimeters of bowing that would otherwise be expected in ∼4 m long LWR components.

bowing↗
DOE OSTI2026

Effects of high-dose neutron irradiation at light-water reactor relevant temperature on the mechanical properties of SiC/SiC composites

For this study, the neutron dose-dependent evolutions and the underlying mechanisms of properties of SiC fiber-reinforced SiC matrix (SiC/SiC) composites at a temperature relevant to light-water reactors (∼600 K) were investigated and analyzed. Chemical vapor infiltrated (CVI) SiC/SiC composites reinforced with Hi-Nicalon Type S or Tyranno SA3 fiber were neutron-irradiated to doses up to 30 dpa. The irradiated composites retained their flexural strengths. The thermal diffusivity and dimensional changes were mostly retained from 2.0 to 30.2 dpa. Discrepancies in irradiation responses among CVI SiC/SiC composites from different sources were found. Additional microstructural analysis using Raman spectroscopy and numerical analysis on irradiation effect on residual stress were used to explain how the microstructural variables, especially of carbon interphases, affect the mechanical properties in the 30–40 dpa dose range.

Continuous fiber-reinforced ceramic matrix composi↗
DOE OSTI2025

Temperature-dependent solid electrolyte interphase reactions drive performance in lithium-mediated nitrogen reduction to ammonia

The solid electrolyte interphase (SEI) is a vital component to control mass transport and selectivity in the lithium-mediated reduction of N 2 to NH 3 (Li-N 2 R). Finding strategies that generate the optimal SEI, a complex network of organic and inorganic species, can potentially improve Li-N 2 R performance. Here, we unravel structure-property relationships of the SEI by correlating its composition with the NH 3 faradaic efficiency (FENH3). By modifying the reaction temperature, we alter electrolyte decomposition reactions and observe changes in the SEI that explain FE NH3 trends between electrolyte solvents. We quantify a complex reaction environment at elevated temperatures where SEI formation is counteracted by etching reactions. This tradeoff leads to temporal fluctuations of FE NH3 , but the maximal FE NH3 can reach up to 40%, the highest value reported for batch cells at ambient pressure, thus far. In conclusion, our work underscores the potential of novel electrolytes that steer SEI selectivity and, ultimately, improve Li-N 2 R performance.

electrocatalytic nitrogen reduction↗
DOE OSTI2024

A decade of insights: Delving into calendar aging trends and implications

Lithium-ion batteries remain at rest for extended periods and experience calendar aging. Although lithium-ion batteries are expected to perform for over 10 years at room temperature, long-term calendar aging data are seldom reported over such timescales. We present a dataset from 232 commercial cells across eight cell types and five manufacturers that underwent calendar aging across various temperatures and states of charge (SOCs) for up to 13 years. We analyze calendar aging across these conditions by tracking capacity loss and resistance growth as the cells degrade. This dataset is used to validate simple models, primarily the Arrhenius law and the power law, which explain the temperature and storage time on calendar aging. Certain applications of Arrhenius and power law fail to describe the dependence of capacity loss on temperature and resistance growth on storage time. Through this dataset, we demonstrate the complexity of calendar aging and the challenges in reducing trends into phenomenological models.

25 ENERGY STORAGE↗
DOE OSTI2026

Revisiting the relationship between demand growth and electricity prices

Here, in this Commentary, we aim to clarify the relationship between electricity demand and prices in the short- and longer-term. We outline three dimensions that shape this relationship: system capacity utilization, system expansion costs, and cost allocation in the rate design process. We explain why demand growth has historically been largely associated with falling electricity prices and explore arguments that future C&I demand growth may increase prices.

O'Shaughnessy, Eric [Lawrence Berkeley National La↗
DOE OSTI2026

J/ψ photoproduction at the threshold with GlueX

High-statistics total cross sections for the vector meson photoproduction at the threshold: γp → ωp (from A2 at MAMI, ELPH, and CBELSA), γp → ϕp (from CLAS6 at JLab and LEPS at SPring-8), and γp → J/ψp (from GlueX at JLab) allow one to extract the absolute value of vector meson nucleon scattering length using Vector Meson Dominance (VMD) model. The “young” vector meson hypothesis may explain the fact that the obtained scattering length values for the nucleon. ϕ-meson compared to the typical hadron size of approximately ∼ 1 fm indicates that the proton is more transparent for the ϕ-meson compared to the ω-meson and is much less transparent than the J/ψ-meson. The extended analysis of Υ-meson photoproduction using quasi-data from the QCD approach is in perfect agreement with the light-meson findings using experimental data. Finally, the ability of J-PARC to measure $π^{–}p → ϕn$ and $π^{–}p → J/ψn$ at the threshold, which are free from the VMD model, is presented. It enables one to understand the dynamics of $s\bar{s}$ and $c\bar{c}$ production at threshold and to search for the effects of LHCb’s heavy quark exotic states.

Vector meson nucleon scattering length↗
DOE OSTI2024

Non-DNA radiosensitive targets that initiate persistent behavioral deficits in rats exposed to space radiation

Predicting future CNS risks for astronauts during deep-space missions will rely substantially on ground-based rodent data with space-relevant ions and behaviors. For rats, the accumulated evidence indicates that less densely ionizing radiation, such as 4 He and 12 C ions, induce behavior deficits at lower doses than densely ionizing ions, such as 48 Ti and 56 Fe. However, this observation conflicts with standard somatic radiobiology, in which densely ionizing ions are generally more effective than less densely ionizing ions, and where the DNA/nucleus is the accepted target for radiation-induced tumorigenesis, cytogenetic aberrations, genetic mutations, and reproductive cell death. To gain deeper insight into the subcellular nature of the radiation targets for behavior risks, we compared the effects of dose, fluence, and linear energy transfer (LET) of 4 He and 56 Fe particles using existing datasets for four distinct behavioral outcomes in rats: elevated plus maze (EPM-anxiety), novel object recognition (NOR-memory), operant responding (OR-response to environmental stimuli), and attentional set-shifting (ATSET-cognitive flexibility). We confirmed that less densely ionizing particles (except protons) showed ~100-fold lower threshold doses than densely ionizing particles for behavioral deficits (0.1–1 cGy for 4 He vs. 15–100 cGy for 56 Fe). However, when analyzed by fluence the behavioral responses converged, indicating that 4 He and 56 Fe were equally effective on a per-track basis. When analyzed by LET, there were ~100-fold differences in the LET for maximum effectiveness for behavioral deficits and DNA endpoints (~1 vs ~100 keV/μm, respectively). These unique features of radiation-induced behavioral deficits (high sensitivity to particles in the 1-keV/μm range, insensitivity to protons in the 0.2 keV/μm range, and isofluence dependence for particles with LET>1 keV/μm) provide evidence in support of a new hypothesis of sub-micron sized radiosensitive targets for behavioral effects consistent with the thickness of plasma membranes and/or small subcellular structures, smaller than a whole synapse. Like our behavior findings, mouse immature oocyte killing which is known to have a plasma membrane target was also better explained by fluence, rather than dose. In contrast, fluence analyses for DNA/nuclear endpoints in somatic cells (e.g., tumor induction, chromosome aberrations) showed opposite results, suggesting that behavior targets are not DNA. Our findings raise questions regarding the identity of subcellular targets and the multi-cellular functional unit for behavior risks, low-dose susceptibility, and generalizability from rat to other species and astronauts.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2025

Glassy carbon formation from pyrolysis of polymeric coatings on fiber-optic sensors

Deploying fiber-optic sensors in nuclear reactors requires a detailed understanding of radiation effects on the fiber materials and the transmitted signals. Previous work has shown large wavelength shifts in the reflected spectra obtained from polymer-coated fiber-optic temperature sensors exposed to high neutron fluences. The sensor drift resulting from these wavelength shifts cannot be explained by radiation effects on fused silica glass. These shifts are hypothesized to be caused by the conversion of the polymeric fiber coating to a glassy carbon via radiolysis and/or pyrolysis and subsequent radiation-induced compaction. Here, thermal degradation of these polymeric coatings was studied to provide insight into the potential origins of the sensor drift phenomenon. Acrylate- and polyimide-coated fibers were heated under various temperatures (250–1300 °C) and environments (oxidative and inert), and the resulting coating products were characterized via mass-loss data, scanning electron microscope imaging, and Raman spectroscopy. Results suggest that the polymer decomposition product of both coating types, at least under inert conditions, is indeed a glassy carbon. Analytical models that account for radiation-induced glassy carbon coating compaction show significant compressive fiber strains and predicted wavelength shifts that agree well with experimental measurements, providing additional evidence that supports the hypothesized origins of the sensor drift.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Melting of charge density waves in low dimensions

Charge density waves (CDWs) are collective electronic states that can reshape and melt, even while confined within a rigid atomic crystal. In two dimensions, melting is predicted to be distinct, proceeding through partially ordered nematic and hexatic states that are neither liquid nor crystal. Here, we measure and explain how continuous, hexatic melting of incommensurate CDWs occurs in low-dimensional materials. As a CDW is thermally excited, disorder emerges progressively—initially through smooth elastic deformations that modulate the local wavelength and subsequently via the nucleation of topological defects. Experimentally, we track three hallmark signatures of CDW melting—azimuthal superlattice peak broadening, wavevector contraction, and integrated intensity decay.

42 ENGINEERING↗
DOE OSTI2025

Origin of enhanced performance when Mn-rich rocksalt cathodes transform to δ -DRX

Most Mn-rich cathodes are known to undergo phase transformation into structures resembling spinel-like ordering upon electrochemical cycling. Recently, the irreversible transformation of Ti-containing Mn-rich disordered rock-salt cathodes into a phase — named δ — with nanoscale spinel-like domains has been shown to increase energy density, capacity retention, and rate capability. However, the nature of the boundaries between domains and their relationship with composition and electrochemistry are not well understood. In this work, we discuss how the transformation into the multi-domain structure results in eight variants of Spinel domains, which is crucial for explaining the nanoscale domain formation in the δ -phase. We study the energetics of crystallographically unique boundaries and the possibility of Li-percolation across them with a fine-tuned CHGNet machine learning interatomic potential. Energetics of 16 d vacancies reveal a strong affinity to segregate to the boundaries, thereby opening Li-pathways at the boundary to enhance long-range Li-percolation in the δ structure. Defect calculations of the relatively low-mobility Ti show how it can influence the extent of Spinel ordering, domain morphology and size significantly; leading to guidelines for engineering electrochemical performance through changes in composition.

Anand, Shashwat↗
DOE OSTI2024

Cellulose acetate membranes exhibit exceptional monovalent to divalent cation selectivities

Salt transport properties of cellulose acetate membranes are reported for a series of chloride salts with mono- valent and divalent cations (LiCl, NaCl, MgCl 2 , CaCl 2 ). Measurements include salt permeability and sorption, with diffusivity values calculated from the permeability and sorption results. We report an exceptionally high LiCl/MgCl 2 selectivity of 750:1. Salts with similar valence (LiCl and NaCl; MgCl 2 and CaCl 2 ) have similar transport properties. The high monovalent/divalent selectivity arises from differences in both sorption and diffusion, with a LiCl/MgCl 2 solubility selectivity of about 11 and a diffusivity selectivity of about 70. Atomistic molecular dynamics simulations show that ions tend to reside in isolated clusters of water. Increasing ion charge strengthens ion–water interactions relative to ion–polymer interactions, explaining the reduced sorption of divalent ions. Diffusion of ions through the membrane occurs via hop-like motion between water clusters. Lithium diffuses faster than magnesium due to weaker ion–water coordination for lithium, which allows for greater mobility within water clusters and more frequent hopping. Altogether, our atomistic simulations suggest that the high LiCl/MgCl 2 selectivity is linked to cellulose acetate’s high water/salt selectivity and is a consequence of low water content and relatively uniform water distribution.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of stoichiometry and hydration level on water domain size and transport in poly(aryl piperidinium) alkaline anion-exchange membranes

Alkaline water electrolysis holds promise in decarbonizing the global economy by enabling renewable hydrogen production with non-precious group metal catalysts. Anion exchange membranes are an important component of alkaline water electrolyzers and would ideally be durable while allowing for high hydroxide conductivity. The poly(aryl piperidinium) (PAP) class of polymers has attracted recent interest due to their good mechanical robustness and high ionic conductivity. Here, in this work, we perform atomistic molecular dynamics (MD) simulations of several PAP polymers at experimentally relevant hydration levels and polymer ion exchange capacities (IECs) to gain nanoscale insight into their properties and to help elucidate the trade-offs that result from tuning the IECs through the polymer stoichiometry. Our MD-predicted macroscopic polymer properties were found to be in good agreement with experimentally available polymer swelling ratios, water-occupied volumes, X-ray scattering, and ionic conductivities. The models show that for hydration levels greater than 8H 2 O per cation a single water cluster will form that percolates through the system. The growth in water cluster size results in large polymer swelling, the creation of larger channels with widths of 7 Å or larger, and nanophase separation between the hydrophilic domains and the polymer with characteristic length scales of approximately 20–30 Å. The experimentally observed lack of a strong X-ray scattering peak at low wavevectors can be explained by a cancellation between the polymer-polymer/water-water and polymer-water correlations and not a loss in nanophase separation. The overlap in coordination environments of the hydroxide oxygen and polymer nitrogen atoms implies that vehicular diffusion between cationic groups could play a role in hydroxide transport. The polymers' hydroxide and water diffusion constants increase by approximately an order of magnitude between hydration levels of 8 and 20H 2 O per cation. However, there are diminishing returns in hydroxide diffusion constant once the IEC exceeds 2.4 meq/g.

08 HYDROGEN↗
DOE OSTI2025

Theory of the photomolecular effect

It is well-known that water in liquid and vapor phases exhibits weak visible-light absorption. Recent experiments, however, show that at the liquid-air interface, absorption drastically increases, accelerating evaporation beyond thermal limits by 2–5 times. Strikingly, evaporation peaks at green wavelengths, despite no corresponding absorptance peak. The underlying mechanism of this observation, termed the photomolecular effect, remains puzzling, particularly as water molecules do not exhibit resonance peaks in the visible spectrum. Here, we present a theoretical model explaining the effect. We show that surface-bound water clusters undergo non-resonant photon-driven evaporation, with green light being particularly effective. Crucially, we do not expect green light to couple more strongly than other wavelengths to the molecules at the surface, rather the energy of green light is more effectively used to vaporize water. Our model accounts for why the evaporation peak does not align with absorptance and provides a quantum mechanical explanation of how a single photon can vaporize an entire molecular cluster. This model challenges conventional views on water-light interactions, revealing a fundamentally non-thermal evaporation mechanism. Furthermore, our findings have implications for water purification, energy-efficient drying, and climate modeling, opening new pathways for optimizing evaporation-based technologies.

Interfacial evaporation↗