Search NASA⌕ Search

SEARCH · Search NASA

Results for “Extrapolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

The role of compressional viscoelasticity in the lubrication of rolling contacts.

A simple model for the time-dependent volume response of a liquid to an applied pressure step is used to calculate the variation with rolling speed of the traction coefficient in a rolling contact system. Good agreement with experimental results is obtained at rolling speeds above 50 in/sec. At lower rolling speeds a very rapid change in the effective viscosity of the lubricant is predicted. This behavior, in conjunction with shear rate effects, is shown to lead to large errors when experimental data are extrapolated to zero rolling speed.

Harrison, G.↗

On the numerical solution of two-dimensional, laminar compressible flows with imbedded shock waves.

The complete, time-dependent Navier-Stokes equations are expressed in conservation form and solved by employing an explicit finite difference numerical technique which incorporates artificial viscosity terms of the form first suggested by Rusanov for numerical stability in the vicinity of shock waves. Surface boundary conditions are developed in a consistent and unique manner through the use of a physically oriented extrapolation procedure. From numerical experimentation an extended range for the explicit stability parameter is established. Also employed is an additional convergence parameter which relates incremental spatial steps. Convergence of the transient solution to a steady state flow was obtained after 400 to 500 time steps.

Goodrich, W. D.↗

Elastic pd scattering at 316, 364, 470, and 590 MeV in the backward hemisphere.

The elastic pd differential cross section at center-of-mass angles between 91 and 164 deg was determined for 316, 364, 470, and 590 MeV proton scattering in a backward hemisphere. For the three largest energies, the cross sections were within 10% of each other at any given angle larger than 130 deg. The extrapolated 180 deg differential cross section remained nearly constant from 316 to 590 MeV.

Alder, J. C.↗

High resolution spectra of Venus - A review.

The existing high-resolution spectra of Venus show considerable variations in the abundance of CO2. As this is the major constituent of the atmosphere, these day-to-day variations indicate that the effective reflecting cloud layer is undergoing substantial vertical displacements over a relatively short time scale. The published observations indicate that CO is uniformly mixed with the CO2, but that the lines of HF may be formed deeper in the atmosphere and HCl lines considerably deeper. These conclusions are based on extrapolations of laboratory measurements and could be considerably altered by new laboratory measurements made under conditions similar to those near the tropopause in Venus.

Young, L. D. G.↗

Measurements of the acoustical parameters of rock powders and the Gold-Soter lunar model.

We are measuring the low frequency velocities and damping factors of acoustic waves in rock powders in vacuo with a view to understanding the lunar seismic signals. Our results combined with those of others, when extrapolated to lunar conditions, lend support to the Gold-Soter model of the outer moon in which the lunar surface is covered with a fine rock powder to a depth of at least 4 km.

Jones, B. W.↗

Spectral development of a solar X-ray burst observed on OSO-7.

The UCSD solar X-ray instrument on the OSO-7 satellite observes X-ray bursts in the 2- to 300-keV range with 10.24-sec time resolution. Spectra obtained from the proportional counter and scintillation counter are analyzed for the event of Nov. 16, 1971, at 0519 UT in terms of thermal (exponential spectrum) and nonthermal (power law) components. The energy content of the approximately 20,000,000 K thermal plasma increased with the 60-sec duration hard X-ray burst, which entirely preceded the 5-keV soft X-ray maximum. If the hard X-rays arise by thick target bremsstrahlung, the nonthermal electrons above 10 keV have sufficient energy to heat the thermally emitting plasma. In the thin target case the collisional energy transfer from nonthermal electrons suffices if the power law electron spectrum is extrapolated below 10 keV, or if the ambient plasma density exceeds 4 x 10 to the 10th power per cu cm.

Mckenzie, D. L.↗

Field-aligned currents, plasma waves, and anomalous resistivity in the disturbed polar cusp.

During the magnetic storm of November 1, 1968, the Ogo 5 spacecraft encountered the polar cusp region at low magnetic latitudes. We show that the region just outside the last closed field lines contained a warm magnetosheath plasma, magnetic field perturbations interpretable as field-aligned current layers, and electrostatic waves possibly due to plasma instabilities driven by these currents. Estimates of anomalous resistivity extrapolated along the field lines due to these electrostatic waves lead to estimates of field-aligned potential drops between Ogo 5 and the ionosphere on the order of 2 kV.

Fredricks, R. W.↗

Magnetospheres of the planets.

Scaling laws for possible outer planet magnetospheres are derived by extrapolation from terrestrial physics. These laws suggest that convection and its associated auroral effects are likely to be relatively less important than in the earth's case, and that there is a possibility that the outer planets have significant radiation belts of energetic trapped particles.

Kennel, C. F.↗

Aspects of investigating STOL noise using large-scale wind-tunnel models.

The applicability of the NASA Ames 40- by 80-foot wind tunnel for acoustic research on STOL concepts has been investigated. The acoustic characteristics of the wind-tunnel test section have been studied with calibrated acoustic sources. Acoustic characteristics of several large-scale STOL models have been studied in both the free-field and wind-tunnel acoustic environments. The results of these studies indicate that the acoustic characteristics of large-scale STOL models can be measured in the wind tunnel if the test section acoustic environment and model acoustic similitude are taken into consideration. The reverberant field of the test section must be determined with an acoustically similar noise source. A directional microphone, a phased array of microphones, and extrapolation of near-field data to far-field are some of the techniques being explored as possible solutions to the directivity loss in a reverberant field. The model sound pressure levels must be of sufficient magnitude to be distinguishible from the wind-tunnel background noise.

Falarski, M. D.↗

Verification of performance of the Mariner 9 television cameras.

The large volume of picture data produced by the Mariner 9 Television Experiment, in addition to providing a description of the planet Mars, emphasizes the need for in situ verification of camera performance. Such data provide the basis for initial quantitative image interpretation by confirmation of the relevance of preflight measurement. This information must be the result of planned calibration sequences rather than extraction from nominal mission photography. A lack of sufficient numbers of frames restricted Mariner camera verifications to only limited operational modes under optimal conditions and required significant extrapolation over the duration of the mission. The evidence does suggest that measurable photometric changes occurred, whereas agreement with preflight data is observed for other parameters.

Thorpe, T. E.↗

A comparison of two transient methods of measuring thermal conductivity of particulate samples.

A comparison is made of the line source (LS) method and the differential line source (DLS) method of measuring thermal conductivity of particulate materials in vacuum. The DLS method requires more instrumentation in the measuring circuitry (an additional amplifier and a differentiating circuit), but since it does not require a stable temperature to initiate a test, it does not need a sample temperature control system. DLS tests can be taken as the temperature in the samples is rising from liquid nitrogen temperature to room temperature. This eliminates the practice of extrapolating thermal conductivity over this large temperature range. Also, the advantages of reduced test time, data reduction time, and small sample temperature rise enable the experimenter to take about 7-12 DLS tests in the time of 2 LS tests. Test data from the two methods agree very well.

Scott, R. W.↗

Application of a pulsed laser for measurements of bathymetry and algal fluorescence.

The technique of measuring water depths with an airborne pulsed dye laser is studied, with emphasis on the degrading effect of some environmental and operational parameters on the transmitted and reflected laser signals. Extrapolation of measurements of laser stimulated fluorescence, performed as a function of both the algal cell concentration and the distance between the algae and the laser/receiver, indicate that a laser system operating from a height of 500 m should be capable of detecting chlorophyll concentrations as low as 1.0 mg/cu m.-

Hickman, G. D.↗

Atmospheric model for correction of spacecraft data.

Description of a radiative transfer model which has been used to correct Apollo photographic imagery for degradation arising from atmospheric scattering. The model was tested using aircraft scanner data, and an extrapolation was then made to spacecraft altitudes. Using standard meteorological data for the region of interest, it is possible to determine transmittance, path radiance, and total radiance from calculations made with the multiple scattering atmospheric model. Simple algorithms are presented which allow potential users of spacecraft sensor data to correct imagery for the deleterious effects due to the scattering of radiation under clear or hazy atmospheric conditions.

Turner, R. E.↗

Nondestructive shell-stability estimation by a combined-loading technique.

The variation of specimen lateral stiffness with compressive axial loading is studied experimentally, and it is demonstrated that buckling loads can be predicted for monocoque shells from such data. A study of the initial specimen geometry is presented, and an evaluation is made of its effect on the distribution of stiffness at zero axial load. When the lateral test force used to determine the stiffness is considered as a destabilizing load in combination with the axial compression, it is shown that critical values of the force can be estimated by the 'Southwell plot' procedure. These critical forces can be correlated with axial load and extrapolated to yield an accurate estimate of the buckling load.

Craig, J. I.↗

Oblique structure of Jupiter's bow shock.

Description of the Pioneer 10 flyby trajectory to the nominal bow shock of Jupiter. The analogy between the earth's and Jupiter's bow shocks is extended to include some structural features associated with oblique plasma shocks. A question of special interest to be answered by Pioneer 10 is to what extent results regarding the earth's bow shock structure can be extrapolated, qualitatively and quantitatively, to Jupiter's interaction with the solar wind.

Greenstadt, E. W.↗

Estimation of rate constants of elementary processes - A review of the state of the art.

'Thermochemical kinetics,' the codification and extrapolation of empirical observations, as applied to certain elementary reactions of importance to combustion studies, is described. This approach allows the critical scrutiny of experimental data in areas where sufficient previous data exist, while, at the same time, illuminating those key areas where more experimentation is crucial. It is shown that combination of transition-state theory with an understanding of the molecular basis of entropy puts fairly rigid constraints on the values of the Arrhenius A-factor for most reactions. This, in turn, means that the activation energy is often the key datum that is missing, and that such data can be obtained with some degree of confidence, even from measurements of rate constants at only one temperature. In complex mechanisms, it is often possible to distinguish among alternate pathways and pinpoint key processes.

Golden, D. M.↗

2s-2p transitions in the spectra of Ca XVII and Ti XIX.

Identifications of energy level transitions in the Ca XVII and Ti XIX spectra in the regions of 190-360 A and 160-300 A, respectively, are presented for the first time. Lines corresponding to the transition arrays concerned are identified and classified. Extrapolation procedures are described in detail.

Goldsmith, S.↗

A survey of compatibility of materials with high pressure oxygen service.

The literature on high pressure oxygen compatibility has been surveyed in order to present the existing state of knowledge. Searches have been conducted of NASA and NBS data retrieval systems. In addition, many individuals, active in the field, were contacted in order to retrieve useful unpublished information. Compatibility data, such as mechanical impact, pneumatic impact, ignition temperature, and flash-and-fire point, were compiled for pressures above 200 bar. Lower pressure data were included if they were useful for extrapolation to pressures above 200 bar. These data, too numerous to be given here, are available from the authors. Brief descriptions of the trends of these data are given. Recommendations for additional high pressure studies are included.

Hust, J. G.↗