Search NASA⌕ Search

SEARCH · Search NASA

Results for “FEED study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Phased array-fed antenna configuration study

The scope of this contract entails a configuration study for a phased array fed transmit antenna operating in the frequency band of 17.7 to 20.2 GHz. This initial contract provides a basis for understanding the design limitations and advantages of advanced phased array and cluster feeds (both utilizing intergral MMIC modules) illuminating folded reflector optics (both near field and focused types). Design parametric analyses are performed utilizing as constraints the objective secondary performance requirements of the Advanced Communications Technology Satellite (Table 1.0). The output of the study provides design information which serves as a data base for future active phased array fed antenna studies such as detailed designs required to support the development of a ground tested breadboard. In general, this study is significant because it provides the antenna community with an understanding of the basic principles which govern near field phased scanned feed effects on secondary reflector system performance. Although several articles have been written on analysis procedures and results for these systems, the authors of this report have observed phenomenon of near field antenna systems not previously documented. Because the physical justification for the exhibited performance is provided herein, the findings of this study add a new dimension to the available knowledge of the subject matter.

Crosswell, W. F.↗
DOE OSTI2023

A Membrane Contactor Enabling Energy-Efficient CO 2 Capture from Point Sources with Deep Eutectic Solvents

We demonstrate a scalable and energy-efficient hollow fiber membrane contactor (HFMC)-based process using a green solvent for CO 2 capture. This process uses a deep eutectic solvent (DES) in an HFMC to provide close interfacial interactions and contact between the DES and CO 2 . This approach overcomes disadvantages associated with direct absorption in DES and could potentially be applied to a variety of solvent-based CO 2 capture methods. Commercial low-cost polymer hollow fiber membranes (e.g., microporous polypropylene) were evaluated for CO 2 capture with reline, a prototypical DES. Single-gas measurements showed that the DES-based polypropylene HFMC can capture and separate CO 2 while rejecting N2. From a mixed gas containing 50 mol % N 2 and 50 mol % CO ν , the DES-based HFMC separated CO 2 with a purity of 96.9 mol %. The effect of several process parameters including solvent flow rate, pressure, and temperature on the CO 2 separation performance was studied. The flux of the recovered CO 2 was 67.43 mmole/m 2 /h at a feed pressure of 4 bar. In situ Fourier transform infrared (FTIR) measurements combined with density functional theory (DFT)-based molecular dynamics simulations revealed that reline absorbs CO 2 by physical absorption without forming a new chemical compound, and CO 2 separation by reline occurs via the pressure swing mechanism. This research provides fundamental insights about physical solvent-based separation processes and a pathway toward practical deployment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Pulsed Electrolysis Promotes Catalyst Activity in Dilute CO 2 Streams

Industrial CO 2 streams vary widely in composition, from pure to as low as 3%, posing challenges for purification or direct conversion. Electrochemical reduction offers a route for converting dilute CO 2 streams but faces severe mass transport limitations. This study demonstrates that pulsed electrolysis effectively overcomes these limitations, enhancing CO 2 electroreduction across variable feed compositions and current densities, particularly at low CO 2 concentrations and high current densities. At 25% CO 2 and 400 mA cm −2 , pulsing improved selectivity from 25.6 to 78.6%, production rate from 13.7 to 21.0 mol m −2 h −1 , and energy productivity from 0.77 to 2.59 mol kWh −1 . A dynamic, multiphysics continuum model confirms a 64% increase in CO 2 concentration within the catalyst layer during pulsing, resolving the transient chemical microenvironment. These findings establish pulsed electrolysis as a viable strategy for converting dilute industrial CO 2 streams into valuable feedstocks, bypassing costly pre-separation.

Orfali, Dania Muhieddine [New York University (NYU↗
DOE OSTI2023

Predictive understanding of the surface tension and velocity of sound in ionic liquids using machine learning

Knowledge of the physical properties of ionic liquids (ILs), such as the surface tension and speed of sound, is important for both industrial and research applications. Unfortunately, technical challenges and costs limit exhaustive experimental screening efforts of ILs for these critical properties. Previous work has demonstrated that the use of quantum-mechanics-based thermochemical property prediction tools, such as the conductor-like screening model for real solvents, when combined with machine learning (ML) approaches, may provide an alternative pathway to guide the rapid screening and design of ILs for desired physiochemical properties. However, the question of which machine-learning approaches are most appropriate remains. In the present study, we examine how different ML architectures, ranging from tree-based approaches to feed-forward artificial neural networks, perform in generating nonlinear multivariate quantitative structure–property relationship models for the prediction of the temperature- and pressure-dependent surface tension of and speed of sound in ILs over a wide range of surface tensions (16.9–76.2 mN/m) and speeds of sound (1009.7–1992 m/s). The ML models are further interrogated using the powerful interpretation method, shapley additive explanations. We find that several different ML models provide high accuracy, according to traditional statistical metrics. The decision tree-based approaches appear to be the most accurate and precise, with extreme gradient-boosting trees and gradient-boosting trees being the best performers. However, our results also indicate that the promise of using machine-learning to gain deep insights into the underlying physics driving structure–property relationships in ILs may still be somewhat premature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Pilgrim Hot Springs Building Dimensions and Energy Modeling

This dataset was created to model the anticipated heating load of a geothermal project in development for the historical site of Pilgrim Hot Springs, and adds to the history of geothermal studies at the site. Models include an historical building (Nun's Quarters), existing modern buildings (Caretaker's Cabin, Igloo, Visitor's Cabin, Staff Shower Hut), and planned building projects (Changing Room, Greenhouse). Modeling results were used to determine feasible geothermal system typologies. The previous study linked below ("Village of Solomon Development of Energy Efficiency Building Standards for New Construction") feeds in to this project. The dataset includes DWG drawings and AKwarm energy models (.hm2) of a subset of existing buildings at the site of Pilgrim Hot Springs. All buildings were modeled in their current state, and some were additionally modeled with improvements to the building envelope. Energy modeling results exported from AKwarm include .htm and .png images.

AKwarm↗
DOE OSTI2023

ON PROCESS STABILITY IN WAAM-CMT OF ALUMINUM ALLOYS

Wire-arc additive manufacturing (WAAM) has become a cost-efficient metal additive manufacturing process. However, depositing aluminum with WAAM is challenging due to its sensitivity to heat input (linear energy density), which can cause undesirable surface topology waviness if not controlled. Thus, a process window is needed that can produce stable geometry and deposition conditions while minimizing production times. In this study, 5183 aluminum alloy wire is used to deposit 10-layer walls with varying wire feed speeds (WFS) and traverse speeds (TS) (at a constant WFS/TS ratio) and varying interpass temperature (IPT). In-situ process data consisting of optical contact-tip-workpiece-distance (CTWD) and current/voltage measurements are collected to determine process condition stability throughout the build. Part geometry is measured using a 3D scanner and build porosity is characterized via digital X-ray. A process window is identified that produces stable surface topology and process conditions at a minimal production time.

aluminum alloy↗
DOE OSTI2026

Evaluating Protection System Performance for a Real-World Weak Grid Area With High Inverter-Based Resources

This paper evaluates an existing protection scheme implemented in a real-world weak grid area with a high penetration of inverter-based resources (IBRs). The study aims to assess the reliability and adequacy of protection schemes originally designed for traditional synchronous machine systems and determine whether they can continue to operate reliably in systems with high levels of IBRs. Hardware relays are tested using a controller-hardware-in-the-loop setup. PSCAD electromagnetic transient simulation with an IBR original equipment manufacturer black-box model is used to perform fault studies and generate COMTRADE data, which are replayed by a realtime digital simulator (RTDS) to feed input to the hardware relays. Three scenarios are analyzed: normal operation, an N-1 contingency, and an IBR-only scenario. The evaluation results reveal the following: 1) the protection scheme remains reliable under normal conditions and N-1 contingencies and 2) in IBRonly scenarios, differential protection (87L) continues to operate reliably, whereas local protection elements, such as distance and directional elements, fail because of the lack of regulated negative sequence current contributed by IBRs. These findings provide utilities with valuable insights for improving their protection systems in high-IBRs.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1983

Control of large spaceborne antenna systems with flexible booms by mechanical decoupling

A simple practical method for designing antenna-feed attitude control systems for large deployable spaceborne antenna systems with long flexible booms is proposed. The basic idea is to mechanically decouple the antenna-feed from the boom so that the feed-attitude control system can be designed without taking the boom dynamics into consideration, thus avoiding a complex control problem involving an infinite-dimensional distributed parameter system. The validity of the proposed method is substantiated by analytical and numerical studies using a mathematical model for the flexible boom which could undergo both bending and torsional vibrations. This approach leads to simple antenna-feed attitude control systems which are amenable to physical implementation.

Wang, P. K. C.↗
NASA NTRS1991

Measurement and modification of the EEG and related behavior

Electrophysiological changes in the sensorimotor pathways were found to accompany the effect of rhythmic EEG patterns in the sensorimotor cortex. Additionally, several striking behavioral changes were seen, including in particular an enhancement of sleep and an elevation of seizure threshold to epileptogenic agents. This raised the possibility that human seizure disorders might be influenced therapeutically by similar training. Our objective in human EEG feedback training became not only the facilitation of normal rhythmic patterns, but also the suppression of abnormal activity, thus requiring complex contingencies directed to the normalization of the sensorimotor EEG. To achieve this, a multicomponent frequency analysis was developed to extract and separate normal and abnormal elements of the EEG signal. Each of these elements was transduced to a specific component of a visual display system, and these were combined through logic circuits to present the subject with a symbolic display. Variable criteria provided for the gradual shaping of EEG elements towards the desired normal pattern. Some 50-70% of patients with poorly controlled seizure disorders experienced therapeutic benefits from this approach in our laboratory, and subsequently in many others. A more recent application of this approach to the modification of human brain function in our lab has been directed to the dichotomous problems of task overload and underload in the contemporary aviation environment. At least 70% of all aviation accidents have been attributed to the impact of these kinds of problems on crew performance. The use of EEG in this context has required many technical innovations and the application of the latest advances in EEG signal analysis. Our first goal has been the identification of relevant EEG characteristics. Additionally, we have developed a portable recording and analysis system for application in this context. Findings from laboratory and in-flight studies suggest that we will be able to detect appropriate changes in brain function, and feed this information to on-board computers for modification of mission requirements and/or crew status.

Sterman, M. B.↗
NASA NTRS1993

Inflatable Antenna Microwave Radiometer for Soil Moisture Measurement

Microwave measurements of soil moisture are not being obtained at the required spatial Earth resolution with current technology. Recently, new novel designs for lightweight reflector systems have been developed using deployable inflatable antenna structures which could enable lightweight real-aperture radiometers. In consideration of this, a study was conducted at the NASA Langley Research Center (LaRC) to determine the feasibility of developing a microwave radiometer system using inflatable reflector antenna technology to obtain high spatial resolution radiometric measurements of soil moisture from low Earth orbit and which could be used with a small and cost effective launch vehicle. The required high resolution with reasonable swath width coupled with the L-band measurement frequency for soil moisture dictated the use of a large (30 meter class) real aperture antenna in conjunction with a pushbroom antenna beam configuration and noise-injection type radiometer designs at 1.4 and 4.3 GHz to produce a 370 kilometer cross-track swath with a 10 kilometer resolution that could be packaged for launch with a Titan 2 class vehicle. This study includes design of the inflatable structure, control analysis, structural and thermal analysis, antenna and feed design, radiometer design, payload packaging, orbital analysis, and electromagnetic losses in the thin membrane inflatable materials.

Bailey, M. C.↗
NASA NTRS2013

Advanced Water Purification System for In Situ Resource Utilization

A main goal in the field of In Situ Resource Utilization is to develop technologies that produce oxygen from regolith to provide consumables to an extraterrestrial outpost. The processes developed reduce metal oxides in the regolith to produce water, which is then electrolyzed to produce oxygen. Hydrochloric and hydrofluoric acids are byproducts of the reduction processes, which must be removed to meet electrolysis purity standards. We previously characterized Nation, a highly water selective polymeric proton-exchange membrane, as a filtration material to recover pure water from the contaminated solution. While the membranes successfully removed both acid contaminants, the removal efficiency of and water flow rate through the membranes were not sufficient to produce large volumes of electrolysis-grade water. In the present study, we investigated electrodialysis as a potential acid removal technique. Our studies have shown a rapid and significant reduction in chloride and fluoride concentrations in the feed solution, while generating a relatively small volume of concentrated waste water. Electrodialysis has shown significant promise as the primary separation technique in ISRU water purification processes.

Anthony, Stephen M.↗
NASA NTRS2014

Advanced Water Purification System for In Situ Resource Utilization Project

A main goal in the field of In Situ Resource Utilization is to develop technologies that produce oxygen from regolith to provide consumables to an extratrrestrial outpost. The processes developed reduce metal oxides in the regolith to produce water, which is then electrolyzed to produce oxygen. Hydrochloric and hydrofluoric acids are byproducts of the reduction processes, which must be removed to meet electrolysis purity standards. We previously characterized Nation, a highly water selective polymeric proton-exchange membrane, as a filtrtion material to recover pure water from the contaminated solution. While the membranes successfully removed both acid contaminants, the removal efficiency of and water flow rate through the membranes were not sufficient to produce large volumes of electrolysis-grade water. In the present study, we investigated electrodialysis as a potential acid removable technique. Our studies have show a rapid and significant reduction in chloride and fluoride concentrations in the feed solution, while generating a relatively small volume of concentrated waste water. Electrodialysis has shown significant promise as the primary separation technique in ISRU water purification processes.

Technology Portfolio System↗
NASA NTRSDate not supplied

Primary and Secondary Diversity Among Enstatite Chondrites and Implications for Their Parent Bodies

The enstatite chondrites (ECs) are noteworthy in having stable isotopic compositions similar to Earth and Moon [1-3], suggesting they were present in Earth’s feeding zone during terrestrial planet formation. To better understand these primitive meteorites, we have been studying their primary and secondary mineralogies and documenting the diversity among the EC groups. Since Keil's landmark paper [4] at least two major groups of ECs have been identified, now known as EH and EL. Lack of EC breccias containing both EH and EL implies at least two separate parent bodies. The ECs are a relatively small meteorite class making up less than 1% of all known meteorites with less than 20 unequilibrated (type 3) individuals known. However, with new samples returned from Antarctica, hot deserts and occasional non-desert meteorites, the diversity of E chondrites has seemed to grow, with potential new groups emerging [e.g., 5]. Based on sulfide compositions, division of EH and EL each into subgroups “a” and “b” has also been proposed and a minimum of four parent bodies for the ECs has been suggested [6]. ECs such as NWA 8785 have secondary minerals not present in other ECs, potentially representing yet another EC parent body [7]. Here we explore the petrologic diversity of EH and EL and anomalous ECs to evaluate their origins, alteration histories and parent bodies.

M K Weisberg↗
NASA NTRS2018

Prevention of Spaceflight-Induced Bone Loss: A Promising Dietary Countermeasure

Space radiation is one of the challenges for long-term spaceflight, especially for missions beyond low Earth Orbit. We have shown that a diet composed of 25% dried plum (DP) prevents radiation-induced bone loss. The DP diet fully protected the cancellous bone microarchitecture of mice exposed to ionizing radiation (gamma, proton, and HZE). In particular relevant to space radiation, we showed that the DP diet prevents bone loss due to 1Gy of sequential exposure of proton (1H, low linear energy transfer -LET-), and 1Gy of iron (56Fe, high-LET). In addition, total body exposure to 1Gy of HZE radiation (56Fe) impaired the osteoprogenitors in mice fed the control diet, as indicated by decreased osteoblast mineralization. In contrast, marrow stem cells from mice fed the DP did not exhibit these deficits. Based on these promising results supporting DP as a countermeasure to prevent space radiation induced-tissue damage, we conducted additional studies to combine radiation and simulated microgravity. We exposed skeletally mature male mice to simulated microgravity (using hindlimb unloading, HU) or total body irradiation (TBI, 2Gy 137Cs) or in combination (HU+TBI). We observed bone loss in the mice fed the control diet (CD) exposed to simulated spaceflight, as measured by cancellous bone microarchitecture parameters such as percent bone volume (BV/TV). In contrast, mice fed the DP diet did not exhibit similar bone loss with either treatments (HU or TBI) or combined (HU+TBI) as seen in most parameters. This was observed in both long bones (tibia) and axial bones (vertebrae). Furthermore, preliminary data shows that pre-feeding with the DP diet attenuates the HU-induced decrement in bone-forming osteoblasts colony counts and mineralization capacity of the osteoprogenitor cells. We also performed DP feeding at lower doses (5%, 10%) and found that these doses are less effective in preventing the radiation-induced bone loss. All our studies with the DP diet as a countermeasure were done with a period of pre-feeding ranging from 14 to 21 days before irradiation, and in order to test the capacity of the DP diet as a countermeasure provided after exposure to radiation, we exposed mice to 2Gy gamma radiation and then provided the DP diet 24 hours post-IR. Preliminary data indicates that DP mitigated the radiation-induced deficits in certain cancellous bone structural parameters. Finally, we showed that mice fed with the control diet (CD) increased oxidative damage in the serum after radiation exposure, whereas mice fed the DP diet do did not show such an increase. In summary, the DP diet is a promising countermeasure for spaceflight-induced tissue damage.

Schreurs, Ann-Sofie↗
DOE OSTI2020

Isotopic Studies for Tracking Biogenic Carbon during Co-processing of Biomass and Vacuum Gas Oil

Co-processing bio-oils with petroleum-derived feeds in the existing multitrillion dollar refining and distribution infrastructure is an attractive option for introducing renewable energy into the fuels marketplace. Considerable research on co-processing bio-oils and vacuum gas oil (VGO) in fluid catalytic cracking units (FCC) using equilibrium catalysts (E-Cats) demonstrated that biomass-derived molecules decreased activity of and increased carbon laydown on E-Cat. In this work, 13 C-labeled biomass was co-processed with VGO using either an E-Cat or a proprietary zeolite Johnson Matthey catalyst (CP758), which is optimzed for upgrading biomass vapors in a riser reactor, to evaluate the fate of biogenic carbon in FCC products. The results from both catalysts indicate that biogenic carbon was incorporated into alkenes and aromatic hydrocarbons. While no biogenic carbon was found in linear alkanes, it was observed in cycloalkanes during experiments with E-Cat but not with CP758. All produced CO2 was biogenic as was most of the carbon laydown on the catalysts. Several partially deoxygenated biomass compounds, such as alkylphenols and benzofurans, unexpectedly contained small amounts of carbon from VGO. Although this study was conducted with labeled biomass and not bio-oil, it provides insights to reaction mechanisms for co-processing bio-oil and VGO in an FCC, which is required to develop catalysts that efficiently convert bio-oil components during FCC co-processing. This work also demonstrates that comprehensive catalyst development utilizing both biomass- and fossil-derived feeds is required to maximize the incorporation of biogenic carbon into transportation fuels.

09 BIOMASS FUELS↗
NASA NTRS1988

Realizable feed-element patterns and optimum aperture efficiency in multibeam antenna systems

The results of an earlier paper by Rahmat-Samii et al. (1981), regarding realizable patterns from feed elements that are part of an array that feeds a reflector antenna, are extended. The earlier paper used a cos exp q theta model for the element radiation pattern, whereas here a parametric study is performed, using a model that assumes a central beam of cos exp q theta shape, with a constant sidelobe level outside the central beam. Realizable q-values are constrained by the maximum directivity based on feed element area. The optimum aperture efficiency (excluding array feed network losses) in an array-reflector system is evaluated as a function of element spacing using this model as well as the model of the earlier paper. Experimental data for tapered slot antenna (TSA) arrays are in agreement with the conclusions based on the model.

Yngvesson, K. S.↗
NASA NTRS1973

Liquid hydrogen turbopump rapid start program

This program was to analyze, test, and evaluate methods of achieving rapid-start of a liquid hydrogen feed system (inlet duct and turbopump) using a minimum of thermal preconditioning time and propellant. The program was divided into four tasks. Task 1 includes analytical studies of the testing conducted in the other three tasks. Task 2 describes the results from laboratory testing of coating samples and the successful adherence of a KX-635 coating to the internal surfaces of the feed system tested in Task 4. Task 3 presents results of testing an uncoated feed system. Tank pressure was varied to determine the effect of flowrate on preconditioning. The discharge volume and the discharge pressure which initiates opening of the discharge valve were varied to determine the effect on deadhead (no through-flow) start transients. Task 4 describes results of testing a similar, internally coated feed system and illustrates the savings in preconditioning time and propellant resulting from the coatings.

Wong, G. S.↗