Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERRIMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Effect of Cu dopant on the structural, magnetic and electrical properties of Ni-Zn ferrites

Highlights: • Ni{sub 0.8-x}Cu{sub x}Zn{sub 0.2}Fe{sub 2}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6) Spinel ferrites synthesized through auto-combustion method and their structural and magnetic properties investigated by XRD, SEM, FTIR and VSM measurements. • Increase in crystal and particle size and decrease in saturation magnetization resulted from substitution on Ni by Cu. • Observed values of (ε) and (tanδ) of the samples show the deterministic role of density in electrical properties of spinel ferrites. - Abstract: Ni{sub 0.8-x}Cu{sub x}Zn{sub 0.2}Fe{sub 2}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6) ferrite was synthesized through auto-combustion method. (XRD) patterns confirmed the crystallization of the samples in spinel structure. FESEM showed that the size of ferrite particles are about few hundred nanometers and with increase in Cu concentration (x) in the structure there is increase in particle size. Fourier transform infrared (FTIR) spectrometry indicates that octahedral and tetrahedral sites are formed. Vibrating sample magnetometer (VSM) results proved reduction of saturation magnetization (M{sub s}) by increasing Cu content, which is explained according to the ferrimagnetic nature of these samples in which Ni is replaced by Cu at octahedral site. Real part of dielectric constant (ε) and loss tangent (tanδ) of samples were also studied in frequency range of 100–20000 Hz. Results showed an increase in ε and tanδ of the sample with x = 0.6 which is considered to be the result of higher density of this sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Negligible spin–charge conversion in Bi films and Bi/Ag(Cu) bilayers

Spin pumping experiments using ferromagnetic metals have reported highly efficient spin–charge conversion in Bi and at the Bi/Ag interface, possibly due to the inverse Rashba–Edelstein effect. However, longitudinal spin Seebeck effect experiments using the yttrium iron garnet ferrimagnetic insulator in Bi films and Bi/Ag bilayers do not show evidence of appreciable spin-to-charge conversion except the large Nernst signal inherent to Bi. These contrasting conclusions highlight the differences between magnetic metals and magnetic insulators as spin current injectors. Only the detected voltages that adhere to the inverse spin Hall effect of j C = (2e/h)θ SH j S x σ are due to spin currents.

36 MATERIALS SCIENCE↗

Synthesis and magnetic characterization of Sr-based Ni{sub 2}X-type hexaferrite

We have investigated the synthesis conditions, and the magnetic properties of the Sr{sub 2}Ni{sub 2}X-type hexagonal ferrite, Sr{sub 2}Ni{sub 2}Fe{sub 28}O{sub 46}. The Sr{sub 2}Ni{sub 2}X-type hexaferrite was synthesized at 1240{sup ∘}C. The spontaneous magnetization at 5 K was 44.2 μ{sub B}/f.u., suggesting that most of the Ni{sup 2+} ions are at the up-spin octahedral sites in the spinel-structure blocks within the model of a Néel-type collinear ferrimagnetic structure. The Curie temperature of the Sr{sub 2}Ni{sub 2}X-type hexaferrite was estimated to be T{sub C}[Sr{sub 2}Ni{sub 2}X] = 472{sup ∘}C. This is consistent with the difference of the block stacking structures of SrM-type, Sr{sub 2}Ni{sub 2}X-type, SrNi{sub 2}W-type, and nickel spinel ferrites.

36 MATERIALS SCIENCE↗

Electronic structure, magnetic properties, and exchange splitting of gadolinium intermetallics

Here, we report here the electronic structure calculations of the magnetic moment, magneto-crystalline anisotropy energy (MAE), and density of states (DOS) of Gd-metal, GdAl 2 , GdAl 3 , GdCo 2 , GdCo 3 , and GdCo 5 . From the DOS, the exchange splitting energy is derived to map ferrimagnetic to paramagnetic phase transition (Curie temperature, T C ). The employed theoretical method here is based on advanced density functional theory, specifically the linearized augmented plane wave method (LAPW) within the local spin density approximation (LSDA), including spin–orbit coupling (SOC) and Hubbard model parameter (U). DOS analysis of both Gd-Al and Gd-Co systems reveals a strong correlation between exchange splitting energy and T C . The Gd-Co system exhibits an enormous exchange splitting energy among Co-3d electrons, vastly overwhelming the vanishing Gd 5d exchange splitting. Finally, these findings suggest that exchange splitting of Co-3d electrons plays a key role in the ground state magnetism and magnetic transition temperatures in these materials.

36 MATERIALS SCIENCE↗

Electronic, structural and magnetic properties of Mn (1+x) Pt (1-x) Sb

Electronic and magnetic properties of half-metallic Heusler alloys can be modified by tuning their chemical compositions. We have carried out a combined theoretical and experimental investigation of Mn (1+x) Pt (1-x) Sb (0 ≤ x ≤ 0.5) alloys. Our first-principles calculations indicate that the stoichiometric MnPtSb exhibits nearly half-metallic band structure, but a robust half-metallicity can be achieved in Mn-rich compositions Mn (1+x) Pt (1-x) Sb (0 ≤ x ≤ 0.5) with x = 0.25 and higher in their cubic structures. In addition, while MnPtSb exhibits ferromagnetic alignment, Mn (1+x) Pt (1-x) Sb are ferrimagnetic for all non-zero values of x. We have also synthesized cubic MnPtSb and Mn 1.25 Pt 0.75 Sb alloys using arc melting and annealing. The magnetic properties of these alloys are consistent with our theoretical predictions. Furthermore, these results indicate that the Mn-rich Mn (1+x) Pt (1-x) Sb alloys have potential for spin-transport-based devices.

36 MATERIALS SCIENCE↗

Diruthenium Tetracarbonate Trianion, [RuII/III2(O2CO)4]3−, Based Molecule-Based Magnets: Three-Dimensional Network Structure and Two-Dimensional Magnetic Ordering

HxK1-xMII[Ru2(CO3)4](H2O)y(MeOH)z (M = Mn, Fe, Co, Ni, Mg) were synthesized from the reaction of MII and K3[Ru2(CO3)4] in water and are isomorphous with an orthorhombic three-dimensional network structures based on e3-CO32- linkages to Ru2 moieties forming layers and also to trans-MII(OH2)4 sites forming linked chains that connect the layers. They, as well as non-isomorphous M = Cu, magnetically order as canted ferrimagnets with Tc = 4.4 {+-} 1.0 K. The presence of S = 0 MII = Mg(II) has essentially no effect on Tc suggesting that the main magnetic pathway does not occur the through MII-based chains, but only via Ru2{center_dot}...Ru2 linkages that reside in layers. This is a rare example of a magnet based upon a second row transition metal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unexpected magnetism, Griffiths phase, and exchange bias in the mixed lanthanide Pr 0.6 Er 0.4 Al 2

We report an unusual coexistence of ferromagnetism and ferrimagnetism, and metamagnetism in Pr 0.6 Er 0.4 Al 2 . In addition, this compound retains a clear Griffiths phase behavior even at 1 kOe magnetic field and shows a large exchange bias after field cooling from the paramagnetic state. The crystal-field excitations and opposite exchange interactions between nearest-neighbor and next-nearest-neighbor rare earth sites explain these behaviors.

Pathak, Arjun K.↗

Magnetic properties of Ni substituted Y-type barium ferrite

Y-type barium hexaferrite is attractive material for various applications, such as high frequency antennas and RF devices, because of its interesting magnetic properties. Especially, Ni substituted Y- type hexaferrites have higher magnetic ordering temperature than other Y-type. We have investigated macroscopic and microscopic properties of Y-type barium hexaferrite. Ba{sub 2}Co{sub 2−x}Ni{sub x}Fe{sub 12}O{sub 22} (x = 0, 0.5, 1.0, 1.5, and 2.0) samples are prepared by solid-state reaction method and studied by X-ray diffraction (XRD), vibrating sample magnetometer, and Mössbauer spectroscopy, as well as a network analyzer for high frequency characteristics. The XRD pattern is analyzed by Rietveld refinement method and confirms the hexagonal structure with R-3m. The hysteresis curve shows ferrimagnetic behavior. Saturation magnetization (M{sub s}) decreases with Ni contents. Ni{sup 2+}, which preferentially occupies the octahedral site with up-spin sub-lattice, has smaller spin value S of 1 than Co{sup 2+} having S = 3/2. The zero-field-cooled (ZFC) measurement of Ba{sub 2}Co{sub 1.5}Ni{sub 0.5}Fe{sub 12}O{sub 22} shows that Curie and spin transition temperatures are found to be 718 K and 209 K, respectively. The Curie temperature T{sub C} is increased with Ni contents, while T{sub S} is decreased with Ni. The Mössbauer spectra were measured at various temperatures and fitted by using a least-squares method with six sextet of six Lorentzian lines for Fe sites, corresponding to the 3b{sub VI}, 6c{sub IV}*, 6c{sub VI}, 18h{sub VI}, 6c{sub IV}, and 3a{sub IV} sites at below T{sub C}. From Mössbauer measurements, we confirmed the spin state of Fe ion to be Fe{sup 3+} and obtained the isomer shift (δ), magnetic hyperfine field (H{sub hf}), and the occupancy ratio of Fe ions at six sub-lattices. The complex permeability and permittivity are measured between 100 MHz and 4 GHz, suggesting that Y-type barium hexaferrite is promising for antenna applications in UHF band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

3D oxygen vacancy distribution and defect-property relations in an oxide heterostructure

Oxide heterostructures exhibit a vast variety of unique physical properties. Examples are unconventional superconductivity in layered nickelates and topological polar order in (PbTiO 3 ) n /(SrTiO 3 ) n superlattices. Although it is clear that variations in oxygen content are crucial for the electronic correlation phenomena in oxides, it remains a major challenge to quantify their impact. Here, we measure the chemical composition in multiferroic (LuFeO 3 ) 9 /(LuFe 2 O 4 ) 1 superlattices, mapping correlations between the distribution of oxygen vacancies and the electric and magnetic properties. Using atom probe tomography, we observe oxygen vacancies arranging in a layered three-dimensional structure with a local density on the order of 10 14 cm -2 , congruent with the formula-unit-thick ferrimagnetic LuFe 2 O 4 layers. The vacancy order is promoted by the locally reduced formation energy and plays a key role in stabilizing the ferroelectric domains and ferrimagnetism in the LuFeO 3 and LuFe 2 O 4 layers, respectively. The results demonstrate pronounced interactions between oxygen vacancies and the multiferroic order in this system and establish an approach for quantifying the oxygen defects with atomic-scale precision in 3D, giving new opportunities for deterministic defect-enabled property control in oxide heterostructures.

36 MATERIALS SCIENCE↗

Tuning of magnetic transition temperatures in nanoparticles of CoCr{sub 2}O{sub 4} multiferroic by B-site mixing

Highlights: • Pure CoCr{sub 2−x}Fe{sub x}O{sub 4} (x = 0.1 and 0.2) nanoparticles of 16–20 and 6–10 nm show enhancement of T{sub c} from 100 to 110 K and T{sub s} from 18 K to 36 K with increasing Fe. • The theoretical variation of reciprocal susceptibility with temperature in paramagnetic region using the function χ{sup −1} = T/C + 1/χ{sub 0} – b/(T − θ) is fitted with the experimental data. • The difference in ferrimagnetic Curie point, θ{sub f} and paramagnetic Curie point, θ{sub p} is 30 K and 7 K respectively for sample x = 0.1 and 0.2 indicating a sharp ferri- to para-magnetic transition in the former one. - Abstract: Pure CoCr{sub 2−x}Fe{sub x}O{sub 4} nanoparticles synthesized through conventional coprecipitation technique show particle size distribution in the range of 16–20 and 6–10 nm for x = 0.1 and 0.2 respectively. Magnetic and specific heat measurements show an enhancement of paramagnetic to collinear ferrimagnetic transition temperature, T{sub c} from 100 to 110 K and to a short range non-collinear spiral ordering, T{sub s} from 18 to 36 K with increasing x from 0.1 to 0.2 respectively. In addition, a strong disagreement between the paramagnetic moment obtained from the fitting of χ{sup −1} = T/C + 1/χ{sub 0} – b/(T − θ) and ferrimagnetic moment measured from the M vs. H loop at 10 K corroborates the nonsaturation behavior of magnetization at 50–100 kOe field and an order of magnitude higher coercivity (H{sub c}). The enhancement of T{sub c} and T{sub s} with increasing Fe concentration is attributed to an intrinsic change in non-collinear to collinear spin structure and strong J{sub A–B} interaction.

36 MATERIALS SCIENCE↗

Canting of the Magnetic Moments on the Octahedral Site of an Iron Oxide Garnet in Response to Diamagnetic Cation Substitution

Using neutron powder diffraction and magnetic susceptibility measurements, we report on the preparation and characterization of the temperature- and field-dependent properties of CaY2ZrFe4O12, a composition closely related to the high-temperature ferrimagnet Y3Fe5O12. By diluting the concentration of paramagnetic ions on the octahedral sublattice of the garnet structure, we find temperature-dependent canting of the magnetic moments. This reflects the importance of the octahedral sublattice in mediating the magnetic interactions between the tetrahedral sites and offers insight into a large number of competing magnetic interactions in the garnet structure.

Milam-Guerrero, JoAnna↗

Interplay of ferromagnetic and antiferromagnetic interactions in epitaxial Co 3 ZnN

Antiperovskite nitrides with the general formula M 3 AN have attracted significant attention due to their tunable electronic and magnetic properties. Among them are many cobalt-based compounds predicted to exhibit high thermodynamic stability and intriguing magnetic behavior. Here, we report the synthesis and magnetic characterization of epitaxial Co3ZnN thin films grown by radio frequency sputtering on SrTiO 3 (STO) and MgO substrates. X-ray diffraction confirms phase-pure (00l)-oriented films with cube-on-cube epitaxy on STO, with a c-lattice parameter of 3.752 Å. Magnetic measurements reveal clear hysteresis at 2 K with a coercive field of ∼0.11 T and a small net moment of 0.108 μ B /f.u., suggesting either a canted antiferromagnetic (AFM) or ferrimagnetic (FiM) configuration. Temperature-dependent magnetization measurements show a transition near 25 K, with strong AFM interactions with Curie–Weiss temperature (Θ) = −80.13 K. Complementary density functional theory and Monte Carlo simulations indicate a ferromagnetic (FM) ground state, with the FM–AFM energy difference decreasing systematically with increasing supercell size, consistent with competition between FM and AFM/FiM interactions. These results highlight Co3ZnN as a magnetically complex antiperovskite nitride with competing exchange interactions.

36 MATERIALS SCIENCE↗

Unraveling the magnetic properties of BiFe{sub 0.5}Cr{sub 0.5}O{sub 3} thin films

We investigate the structural, chemical, and magnetic properties on BiFe{sub 0.5}Cr{sub 0.5}O{sub 3} (BFCO) thin films grown on (001) (110) and (111) oriented SrTiO{sub 3} (STO) substrates by x-ray magnetic circular dichroism and x-ray diffraction. We show how highly pure BFCO films, differently from the theoretically expected ferrimagnetic behavior, present a very weak dichroic signal at Cr and Fe edges, with both moments aligned with the external field. Chemically sensitive hysteresis loops show no hysteretic behavior and no saturation up to 6.8 T. The linear responses are induced by the tilting of the Cr and Fe moments along the applied magnetic field.

36 MATERIALS SCIENCE↗

Effects of Ho-ion substitution on the magnetic properties of the Ca3Co2O6 frustrated spin-chain compound

Highlights: • A great sensitivity of the Ca{sub 3}Co{sub 2}O{sub 6} magnetic behavior to the presence of magnetic foreign cation are emphasized. • As the Ho content increases the ferrimagnetic configuration becomes less stable; and the antiferromagnetic (AFM) interaction enhances gradually. • Antiferromagnetic coupling interaction between Ho{sup 3+} ions are interpreted, The complex micro-mechanism are discussed in detail. - Abstract: Ho{sup 3+}-ion doped spin-chain compounds Ca{sub 3}Co{sub 2-x}Ho{sub x}O{sub 6} (x = 0, 0.05, 0.1, 0.15) were prepared by a conventional solid-state reaction method. Rietveld refinement of the X-ray diffraction patterns at room temperature confirmed the rhombohedral structure with the R 3-bar c space group. The results reveal that the solid solubility of the Ho element in Ca{sub 3}Co{sub 2}O{sub 6} is in the range of x = 0.1–0.15. Magnetic measurement suggests that with the increased Ho content: (1) the ferromagnetic transition temperature Tc and spin freezing temperature T{sub ƒ} decrease obviously; (2) the ferrimagnetic configuration becomes less stable; (3) the dynamic characteristics become slower; and (4) the antiferromagnetic (AFM) interaction enhances gradually. Based on these phenomena, the mechanism was discussed in detail. The magnetic correlation length is broken at a low Ho{sup 3+}-ion level, and the Ho{sup 3+}-ion pair formation along the chain with a high level of doping was interpreted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Moment Enhancement for Mn7 Cluster on Graphene

Mn7 cluster on graphene with different structural motifs and magnetic orders are investigated systematically by first-principles calculations. The calculations show that Mn7 on graphene prefers a two-layer motif and exhibits a ferrimagnetic coupling. The magnetic moment of the Mn7 cluster increases from 5.0 μB at its free-standing state to about 6.0 μB upon adsorption on graphene. Mn7 cluster also induces about 0.3 μB of magnetic moment in the graphene layer, leading to an overall enhancement of 1.3 μB magnetic moment for Mn7 on graphene. Detail electron transfer and bonding analysis have been carried out to investigate the origin of the magnetic enhancement.

36 MATERIALS SCIENCE↗

Structure and properties of ternary manganese nitride Mn{sub 3}CuN{sub y} thin films fabricated by facing target magnetron sputtering

Graphical abstract: This figure reveals the dependence of the texture coefficient TC{sub (111)} and TC{sub (200)} of the Mn{sub 3}CuN{sub y} thin films on T{sub sub}. These results indicate that the preferred orientation of the Mn{sub 3}CuN{sub y} thin films dramatically changed from (1 1 1) to (2 0 0) with the increase of T{sub sub}. In one word, the orientation of Mn{sub 3}CuN{sub y} thin film can be tailored by adjusting the magnetron sputtering processing parameters and substrate. It is the first time to report the deposition of Mn{sub 3}CuN{sub y} thin films on single crystal Si (1 0 0) at various substrate temperatures (T{sub sub}) by facing target magnetron sputtering. The influences of substrate temperature on crystal structure and morphology are discussed. The temperature dependences of magnetization, lattice parameters and resistivity for the resulting film are systematically investigated, which shows several different physical properties from those of previous work. Highlights: {yields} Variation of the substrate temperatures adjusted the preferred orientation from (1 1 1) to (2 0 0) of the Mn{sub 3}CuN{sub y} thin films. {yields} There exists a magnetic ordering transition at 225 K from paramagnetic (PM) to ferrimagnetic (FI), which is different than previous results. {yields} It shows a positive thermal expansion behavior with average linear thermal expansion coefficient 2.49 x 10{sup -5} K{sup -1}. However there was no crystal phase transition occurred around the magnetic transition in the film. {yields} The temperature dependence of resistivity displayed a semiconductor-like behavior, which is quite different from the bulk sample. {yields} We believe that our findings may provide an important role to further utilize the potential of antiperovskite manganese nitride film. -- Abstract: Deposition of Mn{sub 3}CuN{sub y} thin films on single crystal Si (1 0 0) at various substrate temperatures (T{sub sub}) by facing target magnetron sputtering is reported. The crystal structure and composition were characterized by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The results confirmed that the crystalline antiperovskite Mn{sub 3}CuN{sub y} thin film with (2 0 0) highly preferred texture had been obtained at T{sub sub} = 180 {sup o}C. Furthermore, for the resulting Mn{sub 3}CuN{sub y} thin film, it showed different properties compared with the bulk counterpart. There was a paramagnetic to ferrimagnetic transition at 225 K with decreasing temperature. The change of the lattice constant with temperature presented positive thermal expansion behavior and no structural transition was observed. The average linear thermal expansion coefficient ({alpha}) is 2.49 x 10{sup -5} K{sup -1} from 123 K to 298 K. More interestingly, the temperature dependence of resistivity displayed a semiconductor-like behavior, i.e. an obvious monotonous decrease of resistivity with increasing temperature.

36 MATERIALS SCIENCE↗

First principles study of the electronic structure of the Ni 2 MnIn / InAs and Ti 2 MnIn / InSb interfaces

We present a first principles study of the electronic and magnetic properties of epitaxial interfaces between the Heusler compounds, Ti 2 MnIn and Ni 2 MnIn, and the III-V semiconductors, InSb and InAs, respectively. We use density functional theory (DFT) with a machine-learned Hubbard U correction determined by Bayesian optimization. Here, we evaluate these interfaces for prospective applications in Majorana-based quantum computing and spintronics. In both interfaces, states from the Heusler penetrate into the gap of the semiconductor, decaying within a few atomic layers. The magnetic interactions at the interface are weak and local in space and energy. Magnetic moments of less than 0.1 µB are induced in the two atomic layers closest to the interface. The induced spin polarization around the Fermi level of the semiconductor decays within a few atomic layers. The decisive factor for the induced spin polarization around the Fermi level of the semiconductor is the spin polarization around the Fermi level in the Heusler, rather than the overall magnetic moment. As a result, the ferrimagnetic narrow-gap semiconductor Ti 2 MnIn induces a more significant spin polarization in the InSb than the ferromagnetic metal Ni 2 MnIn induces in the InAs. This is explained by the position of the transition metal d states in the Heusler with respect to the Fermi level. Based on our results, these interfaces are unlikely to be useful for Majorana devices but could be of interest for spintronics.

36 MATERIALS SCIENCE↗

Kinetic arrest of field-temperature induced first order phase transition in quasi-one dimensional spin system Ca{sub 3}Co{sub 2}O{sub 6}

We have found that the geometrically frustrated spin chain compound Ca{sub 3}Co{sub 2}O{sub 6} belonging to Ising like universality class with uniaxial anisotropy shows kinetic arrest of first order intermediate phase (IP) to ferrimagnetic (FIM) transition. In this system, dc magnetization measurements followed by different protocols suggest the coexistence of high temperature IP with equilibrium FIM phase in low temperature. Formation of metastable state due to hindered first order transition has also been probed through cooling and heating in unequal field (CHUF) protocol. Kinetically arrested high temperature IP appears to persist down to almost the spin freezing temperature in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗