Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLEXIBLE BODY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Control of Spacecraft Control Laboratory Experiment (SCOLE) slew maneuvers

This is the second report of a set of two reports on the dynamics and control of slewing maneuvers of NASA Spacecraft Control Laboratory Experiment (SCOLE). The control problem of slewing maneuvers of SCOLE is developed in terms of an arbitrary maneuver about any given axis. The control system is developed for the combined problem of rigid-body slew maneuver and vibration suppression of flexible appendage. The control problem is formulated by incorporating the nonlinear equations derived in the previous report and is expressed in terms of a two-point boundary value problem utilizing a quadratic type of performance index. The two-point boundary value problem is solved as a hierarchical control problem with the overall system being split in terms of two subsystems, namely the slewing of the entire assembly and the vibration suppression of the flexible antenna. The coupling variables between the two dynamical subsystems are identified and these two subsystems for control purposes are treated independently in parallel at the first level. Then the state-space trajectory of the combined problem is optimized at the second level.

Kakad, Y. P.↗
NASA NTRS1989

Flexible structure control experiments using a real-time workstation for computer-aided control engineering

A Real-Time Workstation for Computer-Aided Control Engineering has been developed jointly by the Communications Research Centre (CRC) and Ruhr-Universitaet Bochum (RUB), West Germany. The system is presently used for the development and experimental verification of control techniques for large space systems with significant structural flexibility. The Real-Time Workstation essentially is an implementation of RUB's extensive Computer-Aided Control Engineering package KEDDC on an INTEL micro-computer running under the RMS real-time operating system. The portable system supports system identification, analysis, control design and simulation, as well as the immediate implementation and test of control systems. The Real-Time Workstation is currently being used by CRC to study control/structure interaction on a ground-based structure called DAISY, whose design was inspired by a reflector antenna. DAISY emulates the dynamics of a large flexible spacecraft with the following characteristics: rigid body modes, many clustered vibration modes with low frequencies and extremely low damping. The Real-Time Workstation was found to be a very powerful tool for experimental studies, supporting control design and simulation, and conducting and evaluating tests withn one integrated environment.

Stieber, Michael E.↗
DOE OSTI2022

Enhancements to Overset Methods for Achieving Higher Accuracy and Solution Convergence: Preprint

Overset methods, when utilized within a multi-solver framework, provide a very flexible and powerful toolset for analyzing moving body problem. However, many overset framework suffer from several deficiencies such as (1) convergence degradation of the non-linear iterative schemes (2) difficulty in achieving higher-order accuracy and (3) high computational costs over long simulation times. In this work, we explore approaches that mitigate these deficiencies and provide a pathway for improved accuracy and fidelity of overset methods. A high-order, discontinuous Galerkin solver is integrated into an existing overset framework and applied to an unsteady ROBIN fuselage case. For convergence acceleration, an Overset-GMRES linear solver with a timestep controller is applied to a DLR-F6 aircraft steady simulation and an unsteady, notional rotor-fuselage. Finally the same rotor-fuselage case as well as the JVX rotor/wing case is simulated using a reduced-order aerodynamic model.

aerospace↗
NASA NTRS1983

Modular design attitude control system

Application of modular control techniques to the attitude control of a prototype flexible spacecraft and a prototype flexible space platform was further developed by determining numerical values for the physical parameters of a four body approximation of the MSFC/hybrid deployable truss incorporated in the space platform model, generating sensitivity coefficients for the model of the flexible spacecraft, evaluating the changes in the digital computer simulation of the flexible spacecraft resulting from the addition of another rigid body to the model and comparing attitude control effectiveness with actuators on more than one rigid body of the model with that for the case in which the actuators were restricted to one body.

Chichester, F. D.↗
NASA NTRS2014

Assessment of Alternative Interfaces for Manual Commanding of Spacecraft Systems: Compatibility with Flexible Allocation Policies

Astronauts will be responsible for executing a much larger body of procedures as human exploration moves further from Earth and Mission Control. Efficient, reliable methods for executing these procedures, including manual, automated, and mixed execution will be important. Our interface integrates step-by-step instruction with the means for execution. The research reported here compared manual execution using the new system to a system analogous to the manual-only system currently in use on the International Space Station, to assess whether user performance in manual operations would be as good or better with the new than with the legacy system. The system used also allows flexible automated execution. The system and our data lay the foundation for integrating automated execution into the flow of procedures designed for humans. In our formative study, we found speed and accuracy of manual procedure execution was better using the new, integrated interface over the legacy design.

HCI↗
NASA NTRS2007

Newton-Euler Dynamic Equations of Motion for a Multi-body Spacecraft

The Magnetospheric MultiScale (MMS) mission employs a formation of spinning spacecraft with several flexible appendages and thruster-based control. To understand the complex dynamic interaction of thruster actuation, appendage motion, and spin dynamics, each spacecraft is modeled as a tree of rigid bodies connected by spherical or gimballed joints. The method presented facilitates assembling by inspection the exact, nonlinear dynamic equations of motion for a multibody spacecraft suitable for solution by numerical integration. The building block equations are derived by applying Newton's and Euler's equations of motion to an "element" consisting of two bodies and one joint (spherical and gimballed joints are considered separately). Patterns in the "mass" and L'force" matrices guide assembly by inspection of a general N-body tree-topology system. Straightforward linear algebra operations are employed to eliminate extraneous constraint equations, resulting in a minimum-dimension system of equations to solve. This method thus combines a straightforward, easily-extendable, easily-mechanized formulation with an efficient computer implementation.

Stoneking, Eric↗
NASA NTRS1990

Control and structural optimization for maneuvering large spacecraft

Presented here are the results of an advanced control design as well as a discussion of the requirements for automating both the structures and control design efforts for maneuvering a large spacecraft. The advanced control application addresses a general three dimensional slewing problem, and is applied to a large geostationary platform. The platform consists of two flexible antennas attached to the ends of a flexible truss. The control strategy involves an open-loop rigid body control profile which is derived from a nonlinear optimal control problem and provides the main control effort. A perturbation feedback control reduces the response due to the flexibility of the structure. Results are shown which demonstrate the usefulness of the approach. Software issues are considered for developing an integrated structures and control design environment.

Chun, H. M.↗
NASA NTRS1983

Pilot modeling and closed-loop analysis of flexible aircraft in the pitch tracking task

The issue addressed in the appropriate modeling technique for pilot vehicle analysis of large flexible aircraft, when the frequency separation between the rigid-body mode and the dynamic aeroelastic modes is reduced. This situation was shown to have significant effects on pitch-tracking performance and subjective rating of the task, obtained via fixed base simulation. Further, the dynamics in these cases are not well modeled with a rigid-body-like model obtained by including only 'static elastic' effects, for example. It is shown that pilot/vehicle analysis of this data supports the hypothesis that an appropriate pilot-model structure is an optimal-control pilot model of full order. This is in contrast to the contention that a representative model is of reduced order when the subject is controlling high-order dynamics as in a flexible vehicle. The key appears to be in the correct assessment of the pilot's objective of attempting to control 'rigid-body' vehicle response, a response that must be estimated by the pilot from observations contaminated by aeroelastic dynamics. Finally, a model-based metric is shown to correlate well with the pilot's subjective ratings.

Schmidt, D. K.↗
NASA NTRS1979

Acoustic scattering by circular cylinders of various aspect ratios

The effects of acoustic scattering on the useful frequency range of pressure gradient microphones were investigated experimentally between ka values of 0.407 and 4.232 using two circular cylindrical models (L/D = 0.5 and 0.25) having a 25 cm outside diameter. Small condenser microphones, attached to preamplifiers by flexible connectors, were installed from inside the cylindrical bodies, and flush mounted on the exterior surface of the cylinders. A 38 cm diameter woofer in a large speaker enclosure was used as the sound source. Surface pressure augmentation and phase differences were computed from measured data for various sound wave incidence angles. Results are graphically compared with theoretical predictions supplied by NASA for ka = 0.407, 2.288, and 4.232. All other results are tabulated in the appendices. With minor exceptions, the experimentally determined pressure augmentations agreed within 0.75 dB with theoretical predictions. The agreement for relative phase angles was within 5 percent without any exceptions. Scattering parameter variations with ka and L/D ratio, as computed from experimental data, are also presented.

Maciulaitis, A.↗
NASA NTRS1979

Apparatus for endoscopic examination

An endoscope is having a propulsion mechanism and at least one transmitter at the distal end transmitting bursts of energy waves (radio frequency or ultrasonic) for tracking the position of the distal end through the use of two or more transducers on the anterior or lateral surfaces of a patient is described. The propulsion mechanism which consists of two radially expandable bladders separated by an axially expandable bellows with only the forward bladder attached to the distal end is discussed. Alternate mechanisms are reported. A sheath on the endoscope which includes material having a sharp melting point slightly above body temperature so that the sheath is made flexible at selected sections by applying current to separate heating wires in the sections of the sheath is described.

Frazer, R. E.↗
NASA NTRS1982

Control technology development

The main objectives of the control technology development task are given in the slide below. The first is to develop control design techniques based on flexible structural models, rather than simple rigid-body models. Since large space structures are distributed parameter systems, a new degree of freedom, that of sensor/actuator placement, may be exercised for improving control system performance. Another characteristic of large space structures is numerous oscillatory modes within the control bandwidth. Reduced-order controller design models must be developed which produce stable closed-loop systems when combined with the full-order system. Since the date of an actual large-space-structure flight is rapidly approaching, it is vitally important that theoretical developments are tested in actual hardware. Experimental verification is a vital counterpart of all current theoretical developments.

Schaechter, D. B.↗
NASA NTRS1982

Power Systems integration

Power systems integration in large flexible space structures is discussed with emphasis upon body control. A solar array is discussed as a typical example of spacecraft configuration problems. Information on how electric batteries dominate life-cycle costs is presented in chart form. Information is given on liquid metal droplet generators and collectors, hot spot analysis, power dissipation in solar arrays, solar array protection optimization, and electromagnetic compatibility for a power system platform.

Brantley, L. W.↗
NASA NTRS1989

Control-structure interaction in precision pointing servo loops

The control-structure interaction problem is addressed via stability analysis of a generic linear servo loop model. With the plant described by the rigid body mode and a single elastic mode, structural flexibility is categorized into one of three types: (1) appendage, (2) in-the-loop minimum phase, and (3) in-the-loop nonminimum phase. Closing the loop with proportional-derivative (PD) control action and introducing sensor roll-off dynamics in the feedback path, stability conditions are obtained. Trade studies are conducted with modal frequency, modal participation, modal damping, loop bandwidth, and sensor bandwidth treated as free parameters. Results indicate that appendage modes are most likely to produce instability if they are near the sensor rolloff, whereas in-the-loop modes are most dangerous near the loop bandwidth. The main goal of this paper is to provide a fundamental understanding of the control-structure interaction problem so that it may benefit the design of complex spacecraft and pointing system servo loops. In this framework, the JPL Pathfinder gimbal pointer is considered as an example.

Spanos, John T.↗
NASA NTRS1989

Manipulation strategies for massive space payloads

Control for the bracing strategy is being examined. It was concluded earlier that trajectory planning must be improved to best achieve the bracing motion. Very interesting results were achieved which enable the inverse dynamics of flexible arms to be calculated for linearized motion in a more efficient manner than previously published. The desired motion of the end point beginning at t=0 and ending at t=t sub f is used to calculate the required torque at the joint. The solution is separated into a causal function that is zero for t is less than 0 and an accusal function which is zero for t is greater than t sub f. A number of alternative end point trajectories were explored in terms of the peak torque required, the amount of anticipatory action, and other issues. The single link case is the immediate subject and an experimental verification of that case is being performed. Modeling with experimental verification of closed chain dynamics continues. Modeling effort has pointed out inaccuracies that result from the choice of numerical techniques used to incorporate the closed chain constraints when modeling our experimental prototype RALF (Robotic Arm Large and Flexible). Results were compared to TREETOPS, a multi body code. The experimental verification work is suggesting new ways to make comparisons with systems having structural linearity and joint and geometric nonlinearity. The generation of inertial forces was studied with a small arm that will damp the large arm's vibration.

Book, Wayne J.↗
NASA NTRS1990

Attitude control/momentum management and payload pointing in advanced space vehicles

The design and evaluation of an attitude control/momentum management system for highly asymmetric spacecraft configurations are presented. The preliminary development and application of a nonlinear control system design methodology for tracking control of uncertain systems, such as spacecraft payload pointing systems are also presented. Control issues relevant to both linear and nonlinear rigid-body spacecraft dynamics are addressed, whereas any structural flexibilities are not taken into consideration. Results from the first task indicate that certain commonly used simplifications in the equations of motions result in unstable attitude control systems, when used for highly asymmetric spacecraft configurations. An approach is suggested circumventing this problem. Additionally, even though preliminary results from the second task are encouraging, the proposed nonlinear control system design method requires further investigation prior to its application and use as an effective payload pointing system design technique.

Parlos, Alexander G.↗
NASA NTRS1991

Nonlinear dynamic analysis of flexible multibody systems

Two approaches are developed to analyze the dynamic behavior of flexible multibody systems. In the first approach each body is modeled with a modal methodology in a local non-inertial frame of reference, whereas in the second approach, each body is modeled with a finite element methodology in the inertial frame. In both cases, the interaction among the various elastic bodies is represented by constraint equations. The two approaches were compared for accuracy and efficiency: the first approach is preferable when the nonlinearities are not too strong but it becomes cumbersome and expensive to use when many modes must be used. The second approach is more general and easier to implement but could result in high computation costs for a large system. The constraints should be enforced in a time derivative fashion for better accuracy and stability.

Bauchau, Olivier A.↗
NASA NTRS1991

Dynamics modeling of multibody flexible systems with traveling multi-point joints

This paper presents a general methodology for modeling the dynamics of a flexible structure which moves on the surface of another flexible structure. The relative motion of the two bodies need not follow a straight line, nor need the contact surfaces be planar in their undeformed state. A model reduction approach is also developed, which makes the methodology applicable to large structural systems. The Space Station Freedom Mobile Transporter represents one such system, when attached to the Shuttle Orbiter. Numerical examples are provided.

Messac, Achille↗